arXiv subjects

Rickard Nilsson

Publications and source records attributed to Rickard Nilsson.

6 recordsLinked to original sources

arXiv2025

Low-Power Double RIS-Assisted Mobile LEO Satellite Communications

We propose a low-power mobile low earth orbit (LEO) satellite communication architecture, employing double reconfigurable intelligent surfaces (RIS) to enhance energy efficiency and signal performance. With a distance between RISs that satisfies the far-field requirement, this architecture positions one small RIS each in the near-field of the satellite's antenna and the user on the ground. Moreover, we develop a path loss model for the double-RIS communication link, considering the near-field and far-field effects. Further, with the help of dual-stage beamforming, the proposed system maximizes the signal power and minimizes power consumption. Simulation results show that the proposed architecture can reduce the power consumption with 40 dB in the uplink, with a small $0.25^2$ $\text{m}^2$ RIS near the user, to communicate in energy-constrained LEO satellite communication circumstances.

cs.IT↗

arXiv2022

Differential Polarization Shift Keying Through Reconfigurable Intelligent Surfaces

We propose a novel reconfigurable intelligent surface (RIS) encoded information transmission scheme for a line-of-sight environment. A RIS fed with data modulates the information on impinging waves emitted from an external source in the states of polarization (SoP) of the scattered waves by performing a novel differential polarization shift keying. In particular, the information is encoded in the change of the SoP over two successive scattering slots. The proposed scheme is immune to the SoP fluctuations in the wireless channel which allows for non-coherent detection at the receiver.

cs.IT↗

arXiv2021

Binary Polarization Shift Keying with Reconfigurable Intelligent Surfaces

We propose a novel binary polarization shift keying modulation scheme for a line-of-sight environment by exploiting the polarization control ability of the reconfigurable intelligent surface (RIS). The RIS encodes the information data in terms of the polarization states of either the reflected wave from the RIS or the composite wireless channel between an RF source and receiver. In the first case, polarization mismatch correction becomes essential at the receiver. In the second case, the RIS pre-codes the reflected wave to compensate for the polarization mismatch which allows non-coherent demodulation at the receiver.

cs.IT↗

arXiv2021

Scoring the Terabit/s Goal:Broadband Connectivity in 6G

This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be mainly used for pushing the peak rates of point-to-point links. Finally, at the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latency, higher reliability, and reduced complexity.

eess.SP↗

arXiv2020

White Paper on Broadband Connectivity in 6G

This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting.

eess.SP↗

arXiv2016

Spectrally-Precoded OFDM for 5G Wideband Operation in Fragmented sub-6GHz Spectrum

We consider spectrally-precoded OFDM waveforms for 5G wideband transmission in sub-6GHz band. In this densely packed spectrum, a low out-of-band (OOB) waveform is a critical 5G component to achieve the promised high spectral efficiency. By precoding data symbols before OFDM modulation, it is possible to achieve extremely low out-of-band emission with very sharp spectrum transition enabling an efficient and flexible usage of frequency resources. Spectrally-precoded OFDM shows promising results for reaching 5G targets in high-data rate enhanced mobile broadband and ultra-reliable low-latency communications use cases. Spectral precoding is particularly efficient for wideband transmission enabling short-time transmission, which will often require flexible fragmented spectrum usage.

cs.IT↗