arXiv subjects

Ridha Hamila

Publications and source records attributed to Ridha Hamila.

At least 19 recordsLinked to original sources

arXiv2024

Echocardiography to Cardiac MRI View Transformation for Real-Time Blind Restoration

Echocardiography is the most widely used imaging to monitor cardiac functions, serving as the first line in early detection of myocardial ischemia and infarction. However, echocardiography often suffers from several artifacts including sensor noise, lack of contrast, severe saturation, and missing myocardial segments which severely limit its usage in clinical diagnosis. In recent years, several machine learning methods have been proposed to improve echocardiography views. Yet, these methods usually address only a specific problem (e.g. denoising) and thus cannot provide a robust and reliable restoration in general. On the other hand, cardiac MRI provides a clean view of the heart without suffering such severe issues. However, due to its significantly higher cost, it is often only afforded by a few major hospitals, hence hindering its use and accessibility. In this pilot study, we propose a novel approach to transform echocardiography into the cardiac MRI view. For this purpose, Echo2MRI dataset, consisting of echocardiography and real cardiac MRI image pairs, is composed and will be shared publicly. A dedicated Cycle-consistent Generative Adversarial Network (Cycle-GAN) is trained to learn the transformation from echocardiography frames to cardiac MRI views. An extensive set of qualitative evaluations shows that the proposed transformer can synthesize high-quality artifact-free synthetic cardiac MRI views from a given sequence of echocardiography frames. Medical evaluations performed by a group of cardiologists further demonstrate that synthetic MRI views are indistinguishable from their original counterparts and are preferred over their initial sequence of echocardiography frames for diagnosis in 78.9% of the cases.

eess.IV↗

arXiv2024

Accelerating Deep Learning with Fixed Time Budget

The success of modern deep learning is attributed to two key elements: huge amounts of training data and large model sizes. Where a vast amount of data allows the model to learn more features, the large model architecture boosts the learning capability of the model. However, both these factors result in prolonged training time. In some practical applications such as edge-based learning and federated learning, limited-time budgets necessitate more efficient training methods. This paper proposes an effective technique for training arbitrary deep learning models within fixed time constraints utilizing sample importance and dynamic ranking. The proposed method is extensively evaluated in both classification and regression tasks in computer vision. The results consistently show clear gains achieved by the proposed method in improving the learning performance of various state-of-the-art deep learning models in both regression and classification tasks.

cs.LG↗

arXiv2024

The Future of Aerial Communications: A Survey of IRS-Enhanced UAV Communication Technologies

The advent of Intelligent Reflecting Surfaces (IRS) and Unmanned Aerial Vehicles (UAVs) is setting a new benchmark in the field of wireless communications. IRS, with their groundbreaking ability to manipulate electromagnetic waves, have opened avenues for substantial enhancements in signal quality, network efficiency, and spectral usage. These surfaces dynamically reconfigure the propagation environment, leading to optimized signal paths and reduced interference. Concurrently, UAVs have emerged as dynamic, versatile elements within communication networks, offering high mobility and the ability to access and enhance coverage in areas where traditional, fixed infrastructure falls short. This paper presents a comprehensive survey on the synergistic integration of IRS and UAVs in wireless networks, highlighting how this innovative combination substantially boosts network performance, particularly in terms of security, energy efficiency, and reliability. The versatility of UAVs, combined with the signal-manipulating prowess of IRS, creates a potent solution for overcoming the limitations of conventional communication setups, especially in challenging and underserved environments. Furthermore, the survey delves into the cutting-edge realm of Machine Learning (ML), exploring its role in the strategic deployment and operational optimization of UAVs equipped with IRS. The paper also underscores the latest research and practical advancements in this field, providing insights into real-world applications and experimental setups. It concludes by discussing the future prospects and potential directions for this emerging technology, positioning the IRS-UAV integration as a transformative force in the landscape of next-generation wireless

cs.RO↗

arXiv2024

Curriculum for Crowd Counting -- Is it Worthy?

Recent advances in deep learning techniques have achieved remarkable performance in several computer vision problems. A notably intuitive technique called Curriculum Learning (CL) has been introduced recently for training deep learning models. Surprisingly, curriculum learning achieves significantly improved results in some tasks but marginal or no improvement in others. Hence, there is still a debate about its adoption as a standard method to train supervised learning models. In this work, we investigate the impact of curriculum learning in crowd counting using the density estimation method. We performed detailed investigations by conducting 112 experiments using six different CL settings using eight different crowd models. Our experiments show that curriculum learning improves the model learning performance and shortens the convergence time.

cs.CV↗

arXiv2024

Multimodal Crowd Counting with Pix2Pix GANs

Most state-of-the-art crowd counting methods use color (RGB) images to learn the density map of the crowd. However, these methods often struggle to achieve higher accuracy in densely crowded scenes with poor illumination. Recently, some studies have reported improvement in the accuracy of crowd counting models using a combination of RGB and thermal images. Although multimodal data can lead to better predictions, multimodal data might not be always available beforehand. In this paper, we propose the use of generative adversarial networks (GANs) to automatically generate thermal infrared (TIR) images from color (RGB) images and use both to train crowd counting models to achieve higher accuracy. We use a Pix2Pix GAN network first to translate RGB images to TIR images. Our experiments on several state-of-the-art crowd counting models and benchmark crowd datasets report significant improvement in accuracy.

cs.CV↗

arXiv2023

A Comprehensive Survey On Client Selections in Federated Learning

Federated Learning (FL) is a rapidly growing field in machine learning that allows data to be trained across multiple decentralized devices. The selection of clients to participate in the training process is a critical factor for the performance of the overall system. In this survey, we provide a comprehensive overview of the state-of-the-art client selection techniques in FL, including their strengths and limitations, as well as the challenges and open issues that need to be addressed. We cover conventional selection techniques such as random selection where all or partial random of clients is used for the trained. We also cover performance-aware selections and as well as resource-aware selections for resource-constrained networks and heterogeneous networks. We also discuss the usage of client selection in model security enhancement. Lastly, we discuss open issues and challenges related to clients selection in dynamic constrained, and heterogeneous networks.

cs.LG↗

arXiv2023

Crowd Counting in Harsh Weather using Image Denoising with Pix2Pix GANs

Visual crowd counting estimates the density of the crowd using deep learning models such as convolution neural networks (CNNs). The performance of the model heavily relies on the quality of the training data that constitutes crowd images. In harsh weather such as fog, dust, and low light conditions, the inference performance may severely degrade on the noisy and blur images. In this paper, we propose the use of Pix2Pix generative adversarial network (GAN) to first denoise the crowd images prior to passing them to the counting model. A Pix2Pix network is trained using synthetic noisy images generated from original crowd images and then the pretrained generator is then used in the inference engine to estimate the crowd density in unseen, noisy crowd images. The performance is tested on JHU-Crowd dataset to validate the significance of the proposed method particularly when high reliability and accuracy are required.

cs.CV↗

arXiv2023

Visual Crowd Analysis: Open Research Problems

Over the last decade, there has been a remarkable surge in interest in automated crowd monitoring within the computer vision community. Modern deep-learning approaches have made it possible to develop fully-automated vision-based crowd-monitoring applications. However, despite the magnitude of the issue at hand, the significant technological advancements, and the consistent interest of the research community, there are still numerous challenges that need to be overcome. In this article, we delve into six major areas of visual crowd analysis, emphasizing the key developments in each of these areas. We outline the crucial unresolved issues that must be tackled in future works, in order to ensure that the field of automated crowd monitoring continues to progress and thrive. Several surveys related to this topic have been conducted in the past. Nonetheless, this article thoroughly examines and presents a more intuitive categorization of works, while also depicting the latest breakthroughs within the field, incorporating more recent studies carried out within the last few years in a concise manner. By carefully choosing prominent works with significant contributions in terms of novelty or performance gains, this paper presents a more comprehensive exposition of advancements in the current state-of-the-art.

cs.CV↗

arXiv2023

DroneNet: Crowd Density Estimation using Self-ONNs for Drones

Video surveillance using drones is both convenient and efficient due to the ease of deployment and unobstructed movement of drones in many scenarios. An interesting application of drone-based video surveillance is to estimate crowd densities (both pedestrians and vehicles) in public places. Deep learning using convolution neural networks (CNNs) is employed for automatic crowd counting and density estimation using images and videos. However, the performance and accuracy of such models typically depend upon the model architecture i.e., deeper CNN models improve accuracy at the cost of increased inference time. In this paper, we propose a novel crowd density estimation model for drones (DroneNet) using Self-organized Operational Neural Networks (Self-ONN). Self-ONN provides efficient learning capabilities with lower computational complexity as compared to CNN-based models. We tested our algorithm on two drone-view public datasets. Our evaluation shows that the proposed DroneNet shows superior performance on an equivalent CNN-based model.

cs.CV↗

arXiv2023

Crowd Density Estimation using Imperfect Labels

Density estimation is one of the most widely used methods for crowd counting in which a deep learning model learns from head-annotated crowd images to estimate crowd density in unseen images. Typically, the learning performance of the model is highly impacted by the accuracy of the annotations and inaccurate annotations may lead to localization and counting errors during prediction. A significant amount of works exist on crowd counting using perfectly labelled datasets but none of these explore the impact of annotation errors on the model accuracy. In this paper, we investigate the impact of imperfect labels (both noisy and missing labels) on crowd counting accuracy. We propose a system that automatically generates imperfect labels using a deep learning model (called annotator) which are then used to train a new crowd counting model (target model). Our analysis on two crowd counting models and two benchmark datasets shows that the proposed scheme achieves accuracy closer to that of the model trained with perfect labels showing the robustness of crowd models to annotation errors.

cs.CV↗

arXiv2023

CLIP: Train Faster with Less Data

Deep learning models require an enormous amount of data for training. However, recently there is a shift in machine learning from model-centric to data-centric approaches. In data-centric approaches, the focus is to refine and improve the quality of the data to improve the learning performance of the models rather than redesigning model architectures. In this paper, we propose CLIP i.e., Curriculum Learning with Iterative data Pruning. CLIP combines two data-centric approaches i.e., curriculum learning and dataset pruning to improve the model learning accuracy and convergence speed. The proposed scheme applies loss-aware dataset pruning to iteratively remove the least significant samples and progressively reduces the size of the effective dataset in the curriculum learning training. Extensive experiments performed on crowd density estimation models validate the notion behind combining the two approaches by reducing the convergence time and improving generalization. To our knowledge, the idea of data pruning as an embedded process in curriculum learning is novel.

cs.CV↗

arXiv2023

LCDnet: A Lightweight Crowd Density Estimation Model for Real-time Video Surveillance

Automatic crowd counting using density estimation has gained significant attention in computer vision research. As a result, a large number of crowd counting and density estimation models using convolution neural networks (CNN) have been published in the last few years. These models have achieved good accuracy over benchmark datasets. However, attempts to improve the accuracy often lead to higher complexity in these models. In real-time video surveillance applications using drones with limited computing resources, deep models incur intolerable higher inference delay. In this paper, we propose (i) a Lightweight Crowd Density estimation model (LCDnet) for real-time video surveillance, and (ii) an improved training method using curriculum learning (CL). LCDnet is trained using CL and evaluated over two benchmark datasets i.e., DroneRGBT and CARPK. Results are compared with existing crowd models. Our evaluation shows that the LCDnet achieves a reasonably good accuracy while significantly reducing the inference time and memory requirement and thus can be deployed over edge devices with very limited computing resources.

cs.CV↗

arXiv2022

Drones-aided Asset Maintenance in Hospitals

The rapid outbreak of COVID-19 pandemic invoked scientists and researchers to prepare the world for future disasters. During the pandemic, global authorities on healthcare urged the importance of disinfection of objects and surfaces. To implement efficient and safe disinfection services during the pandemic, robots have been utilized for indoor assets. In this paper, we envision the use of drones for disinfection of outdoor assets in hospitals and other facilities. Such heterogeneous assets may have different service demands (e.g., service time, quantity of the disinfectant material etc.), whereas drones have typically limited capacity (i.e., travel time, disinfectant carrying capacity). To serve all the facility assets in an efficient manner, the drone to assets allocation and drone travel routes must be optimized. In this paper, we formulate the capacitated vehicle routing problem (CVRP) to find optimal route for each drone such that the total service time is minimized, while simultaneously the drones meet the demands of each asset allocated to it. The problem is solved using mixed integer programming (MIP). As CVRP is an NP-hard problem, we propose a lightweight heuristic to achieve sub-optimal performance while reducing the time complexity in solving the problem involving a large number of assets.

cs.RO↗

arXiv2022

Revisiting Crowd Counting: State-of-the-art, Trends, and Future Perspectives

Crowd counting is an effective tool for situational awareness in public places. Automated crowd counting using images and videos is an interesting yet challenging problem that has gained significant attention in computer vision. Over the past few years, various deep learning methods have been developed to achieve state-of-the-art performance. The methods evolved over time vary in many aspects such as model architecture, input pipeline, learning paradigm, computational complexity, and accuracy gains etc. In this paper, we present a systematic and comprehensive review of the most significant contributions in the area of crowd counting. Although few surveys exist on the topic, our survey is most up-to date and different in several aspects. First, it provides a more meaningful categorization of the most significant contributions by model architectures, learning methods (i.e., loss functions), and evaluation methods (i.e., evaluation metrics). We chose prominent and distinct works and excluded similar works. We also sort the well-known crowd counting models by their performance over benchmark datasets. We believe that this survey can be a good resource for novice researchers to understand the progressive developments and contributions over time and the current state-of-the-art.

cs.CV↗

arXiv2022

A Survey on Mobile Edge Computing for Video Streaming: Opportunities and Challenges

5G communication brings substantial improvements in the quality of service provided to various applications by achieving higher throughput and lower latency. However, interactive multimedia applications (e.g., ultra high definition video conferencing, 3D and multiview video streaming, crowd-sourced video streaming, cloud gaming, virtual and augmented reality) are becoming more ambitious with high volume and low latency video streams putting strict demands on the already congested networks. Mobile Edge Computing (MEC) is an emerging paradigm that extends cloud computing capabilities to the edge of the network i.e., at the base station level. To meet the latency requirements and avoid the end-to-end communication with remote cloud data centers, MEC allows to store and process video content (e.g., caching, transcoding, pre-processing) at the base stations. Both video on demand and live video streaming can utilize MEC to improve existing services and develop novel use cases, such as video analytics, and targeted advertisements. MEC is expected to reshape the future of video streaming by providing ultra-reliable and low latency streaming (e.g., in augmented reality, virtual reality, and autonomous vehicles), pervasive computing (e.g., in real-time video analytics), and blockchain-enabled architecture for secure live streaming. This paper presents a comprehensive survey of recent developments in MEC-enabled video streaming bringing unprecedented improvement to enable novel use cases. A detailed review of the state-of-the-art is presented covering novel caching schemes, optimal computation offloading, cooperative caching and offloading and the use of artificial intelligence (i.e., machine learning, deep learning, and reinforcement learning) in MEC-assisted video streaming services.

cs.MM↗

arXiv2022

Fully Automated 2D and 3D Convolutional Neural Networks Pipeline for Video Segmentation and Myocardial Infarction Detection in Echocardiography

Cardiac imaging known as echocardiography is a non-invasive tool utilized to produce data including images and videos, which cardiologists use to diagnose cardiac abnormalities in general and myocardial infarction (MI) in particular. Echocardiography machines can deliver abundant amounts of data that need to be quickly analyzed by cardiologists to help them make a diagnosis and treat cardiac conditions. However, the acquired data quality varies depending on the acquisition conditions and the patient's responsiveness to the setup instructions. These constraints are challenging to doctors especially when patients are facing MI and their lives are at stake. In this paper, we propose an innovative real-time end-to-end fully automated model based on convolutional neural networks (CNN) to detect MI depending on regional wall motion abnormalities (RWMA) of the left ventricle (LV) from videos produced by echocardiography. Our model is implemented as a pipeline consisting of a 2D CNN that performs data preprocessing by segmenting the LV chamber from the apical four-chamber (A4C) view, followed by a 3D CNN that performs a binary classification to detect if the segmented echocardiography shows signs of MI. We trained both CNNs on a dataset composed of 165 echocardiography videos each acquired from a distinct patient. The 2D CNN achieved an accuracy of 97.18% on data segmentation while the 3D CNN achieved 90.9% of accuracy, 100% of precision and 95% of recall on MI detection. Our results demonstrate that creating a fully automated system for MI detection is feasible and propitious.

eess.IV↗

arXiv2022

ML-based Handover Prediction and AP Selection in Cognitive Wi-Fi Networks

Device mobility in dense Wi-Fi networks offers several challenges. Two well-known problems related to device mobility are handover prediction and access point selection. Due to the complex nature of the radio environment, analytical models may not characterize the wireless channel, which makes the solution of these problems very difficult. Recently, cognitive network architectures using sophisticated learning techniques are increasingly being applied to such problems. In this paper, we propose data-driven machine learning (ML) schemes to efficiently solve these problems in wireless LAN (WLAN) networks. The proposed schemes are evaluated and results are compared with traditional approaches to the aforementioned problems. The results report significant improvement in network performance by applying the proposed schemes. The proposed scheme for handover prediction outperforms traditional methods i.e. received signal strength method and traveling distance method by reducing the number of unnecessary handovers by 60% and 50% respectively. Similarly, in AP selection, the proposed scheme outperforms the strongest signal first and least loaded first algorithms by achieving higher throughput gains up to 9.2% and 8% respectively.

cs.NI↗

arXiv2021

Federated Learning for UAV Swarms Under Class Imbalance and Power Consumption Constraints

The usage of unmanned aerial vehicles (UAVs) in civil and military applications continues to increase due to the numerous advantages that they provide over conventional approaches. Despite the abundance of such advantages, it is imperative to investigate the performance of UAV utilization while considering their design limitations. This paper investigates the deployment of UAV swarms when each UAV carries a machine learning classification task. To avoid data exchange with ground-based processing nodes, a federated learning approach is adopted between a UAV leader and the swarm members to improve the local learning model while avoiding excessive air-to-ground and ground-to-air communications. Moreover, the proposed deployment framework considers the stringent energy constraints of UAVs and the problem of class imbalance, where we show that considering these design parameters significantly improves the performances of the UAV swarm in terms of classification accuracy, energy consumption and availability of UAVs when compared with several baseline algorithms.

cs.LG↗