arXiv subjects

Robert A. Wolkow

Publications and source records attributed to Robert A. Wolkow.

At least 19 recordsLinked to original sources

arXiv2025

Roadmap on Atomic-scale Semiconductor Devices

Spin states in semiconductors provide exceptionally stable and noise-resistant environments for qubits, positioning them as optimal candidates for reliable quantum computing technologies. The proposal to use nuclear and electronic spins of donor atoms in silicon, introduced by Kane in 1998, sparked a new research field focused on the precise positioning of individual impurity atoms for quantum devices, utilising scanning tunnelling microscopy and ion implantation. This roadmap article reviews the advancements in the 25 years since Kane's proposal, the current challenges, and the future directions in atomic-scale semiconductor device fabrication and measurement. It covers the quest to create a silicon-based quantum computer and expands to include diverse material systems and fabrication techniques, highlighting the potential for a broad range of semiconductor quantum technological applications. Key developments include phosphorus in silicon devices such as single-atom transistors, arrayed few-donor devices, one- and two-qubit gates, three-dimensional architectures, and the development of a toolbox for future quantum integrated circuits. The roadmap also explores new impurity species like arsenic and antimony for enhanced scalability and higher-dimensional spin systems, new chemistry for dopant precursors and lithographic resists, and the potential for germanium-based devices. Emerging methods, such as photon-based lithography and electron beam manipulation, are discussed for their disruptive potential. This roadmap charts the path toward scalable quantum computing and advanced semiconductor quantum technologies, emphasising the critical intersections of experiment, technological development, and theory.

quant-ph↗

arXiv2020

Atomic defects of the hydrogen-terminated Silicon(100)-2x1 surface imaged with STM and nc-AFM

The hydrogen-terminated Silicon(100)-2x1 surface (H-Si(100)-2x1) provides a promising platform for the development of atom scale devices, with recent work showing their creation through precise desorption of surface hydrogen atoms. While samples with relatively large areas of the hydrogen terminated 2x1 surface are routinely created using an in-situ methodology, surface defects are inevitably formed as well reducing the area available for patterning. Here, we present a catalog of several commonly found defects of the H-Si(100)-2x1 surface. By using a combination of scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM), we are able to extract useful information regarding the atomic and electronic structure of these defects. This allowed for the confirmation of literature assignments of several commonly found defects, as well as proposed classification of previously unreported and unassigned defects. By better understanding the structure and origin of these defects, we make the first steps toward enabling the creation of superior surfaces ultimately leading to more consistent and reliable fabrication of atom scale devices.

cond-mat.mtrl-sci↗

arXiv2019

Deep Learning-Guided Surface Characterization for Autonomous Hydrogen Lithography

As the development of atom scale devices transitions from novel, proof-of-concept demonstrations to state-of-the-art commercial applications, automated assembly of such devices must be implemented. Here we present an automation method for the identification of defects prior to atomic fabrication via hydrogen lithography using deep learning. We trained a convolutional neural network to locate and differentiate between surface features of the technologically relevant hydrogen-terminated silicon surface imaged using a scanning tunneling microscope. Once the positions and types of surface features are determined, the predefined atomic structures are patterned in a defect-free area. By training the network to differentiate between common defects we are able to avoid charged defects as well as edges of the patterning terraces. Augmentation with previously developed autonomous tip shaping and patterning modules allows for atomic scale lithography with minimal user intervention.

cond-mat.mtrl-sci↗

arXiv2019

Detecting and Directing Single Molecule Binding Events on H-Si(100) with Application to Ultra-dense Data Storage

Many new material systems are being explored to enable smaller, more capable and energy efficient devices. These bottom up approaches for atomic and molecular electronics, quantum computation, and data storage all rely on a well-developed understanding of materials at the atomic scale. Here, we report a versatile scanning tunneling microscope (STM) charge characterization technique, which reduces the influence of the typically perturbative STM tip field, to develop this understanding even further. Using this technique, we can now observe single molecule binding events to atomically defined reactive sites (fabricated on a hydrogen-terminated silicon surface) through electronic detection. We then developed a new error correction tool for automated hydrogen lithography, directing molecular hydrogen binding events using these sites to precisely repassivate surface dangling bonds (without the use of a scanned probe). We additionally incorporated this molecular repassivation technique as the primary rewriting mechanism in new ultra-dense atomic data storage designs (0.88 petabits per in$^{2}$).

cond-mat.mtrl-sci↗

arXiv2019

Electrostatic Landscape of a H-Silicon Surface Probed by a Moveable Quantum Dot

With nanoelectronics reaching the limit of atom-sized devices, it has become critical to examine how irregularities in the local environment can affect device functionality. Here, we characterize the influence of charged atomic species on the electrostatic potential of a semiconductor surface at the sub-nanometer scale. Using non-contact atomic force microscopy, two-dimensional maps of the contact potential difference are used to show the spatially varying electrostatic potential on the (100) surface of hydrogen-terminated highly-doped silicon. Three types of charged species, one on the surface and two within the bulk, are examined. An electric field sensitive spectroscopic signature of a single probe atom reports on nearby charged species. The identity of one of the near-surface species has been uncertain. That species, suspected of being boron or perhaps a negatively charged donor species, we suggest is of a character more consistent with either a negatively charged interstitial hydrogen or a hydrogen vacancy complex.

cond-mat.mtrl-sci↗

arXiv2018

SiQAD: A Design and Simulation Tool for Atomic Silicon Quantum Dot Circuits

This paper introduces SiQAD, a computer-aided design tool enabling the rapid design and simulation of atomic silicon dangling bond quantum dot patterns capable of computational logic. Several simulation tools are included, each able to inform the designer on various aspects of their designs: a ground-state electron configuration finder, a non-equilibrium electron dynamics simulator, and an electric potential landscape solver with clocking electrode support. Simulations have been compared against past experimental results to inform the electron population estimation and dynamic behavior. New logic gates suitable for this platform have been designed and simulated, and a clocked wire has been demonstrated. This work paves the way for the exploration of the vast and fertile design space of atomic silicon dangling bond quantum dot circuits.

cond-mat.mes-hall↗

arXiv2018

Binary Atomic Silicon Logic

It has long been anticipated that the ultimate in miniature circuitry will be crafted of single atoms. Despite many advances made in scanned probe microscopy studies of molecules and atoms on surfaces, challenges with patterning and limited thermal stability have remained. Here we make progress toward those challenges and demonstrate rudimentary circuit elements through the patterning of dangling bonds on a hydrogen terminated silicon surface. Dangling bonds sequester electrons both spatially and energetically in the bulk band gap, circumventing short circuiting by the substrate. We deploy paired dangling bonds occupied by one movable electron to form a binary electronic building block. Inspired by earlier quantum dot-based approaches, binary information is encoded in the electron position allowing demonstration of a binary wire and an OR gate.

cond-mat.mtrl-sci↗

arXiv2018

Autonomous Scanning Probe Microscopy in-situ Tip Conditioning through Machine Learning

Atomic scale characterization and manipulation with scanning probe microscopy rely upon the use of an atomically sharp probe. Here we present automated methods based on machine learning to automatically detect and recondition the quality of the probe of a scanning tunneling microscope. As a model system, we employ these techniques on the technologically relevant hydrogen-terminated silicon surface, training the network to recognize abnormalities in the appearance of surface dangling bonds. Of the machine learning methods tested, a convolutional neural network yielded the greatest accuracy, achieving a positive identification of degraded tips in 97% of the test cases. By using multiple points of comparison and majority voting, the accuracy of the method is improved beyond 99%. The methods described here can easily be generalized to other material systems and nanoscale imaging techniques.

cond-mat.mes-hall↗

arXiv2017

Resolving and Tuning Carrier Capture Rates at a Single Silicon Atom Gap State

We report on tuning the carrier capture events at a single dangling bond (DB) midgap state by varying the substrate temperature, doping type, and doping concentration. All-electronic time-resolved scanning tunneling microscopy (TR-STM) is employed to directly measure the carrier capture rates on the nanosecond time scale. A characteristic negative differential resistance (NDR) feature is evident in the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) measurements of DBs on both n and p-type doped samples. It is found that a common model accounts for both observations. Atom-specific Kelvin probe force microscopy (KPFM) measurements confirm the energetic position of the DB's charge transition levels, corroborating STS studies. It is shown that under different tip-induced fields the DB can be supplied from two distinct reservoirs: the bulk conduction band and/or the valence band. We measure the filling and emptying rates of the DBs in the energy regime where electrons are supplied by the bulk valence band. By adding point charges in the vicinity of a DB, Coulombic interactions are shown to shift observed STS and NDR features.

cond-mat.mes-hall↗

arXiv2017

All-Electronic Nanosecond-Resolved Scanning Tunneling Microscopy: Facilitating the Investigation of Single Dopant Charge Dynamics

The miniaturization of semiconductor devices to the scales where small numbers of dopants can control device properties requires the development of new techniques capable of characterizing their dynamics. Investigating single dopants requires sub-nanometer spatial resolution which motivates the use of scanning tunneling microscopy (STM), however, conventional STM is limited to millisecond temporal resolution. Several methods have been developed to overcome this shortcoming. Among them is all-electronic time-resolved STM, which is used in this work to study dopant dynamics in silicon with nanosecond resolution. The methods presented here are widely accessible and allow for local measurement of a wide variety of dynamics at the atomic scale. A novel time-resolved scanning tunneling spectroscopy technique is presented and used to efficiently search for dynamics.

cond-mat.mes-hall↗

arXiv2017

Atomic White-Out: Enabling Atomic Circuitry Through Mechanically Induced Bonding of Single Hydrogen Atoms to a Silicon Surface

We report the mechanically induced formation of a silicon-hydrogen covalent bond and its application in engineering nanoelectronic devices. We show that using the tip of a non-contact atomic force microscope (NC-AFM), a single hydrogen atom could be vertically manipulated. When applying a localized electronic excitation, a single hydrogen atom is desorbed from the hydrogen passivated surface and can be transferred to the tip apex as evidenced from a unique signature in frequency shift curves. In the absence of tunnel electrons and electric field in the scanning probe microscope junction at 0 V, the hydrogen atom at the tip apex is brought very close to a silicon dangling bond, inducing the mechanical formation of a silicon-hydrogen covalent bond and the passivation of the dangling bond. The functionalized tip was used to characterize silicon dangling bonds on the hydrogen-silicon surface, was shown to enhance the scanning tunneling microscope (STM) contrast, and allowed NC-AFM imaging with atomic and chemical bond contrasts. Through examples, we show the importance of this atomic scale mechanical manipulation technique in the engineering of the emerging technology of on-surface dangling bond based nanoelectronic devices.

cond-mat.mes-hall↗

arXiv2016

Time-Resolved Imaging of Negative Differential Resistance on the Atomic Scale

Negative differential resistance remains an attractive but elusive functionality, so far only finding niche applications. Atom scale entities have shown promising properties, but viability of device fabrication requires fuller understanding of electron dynamics than has been possible to date. Using an all-electronic time-resolved scanning tunneling microscopy technique and a Green's function transport model, we study an isolated dangling bond on a hydrogen terminated silicon surface. A robust negative differential resistance feature is identified as a many body phenomenon related to occupation dependent electron capture by a single atomic level. We measure all the time constants involved in this process and present atomically resolved, nanosecond timescale images to simultaneously capture the spatial and temporal variation of the observed feature.

cond-mat.mes-hall↗

arXiv2016

Time-Resolved Single Dopant Charge Dynamics in Silicon

As the ultimate miniaturization of semiconductor devices approaches, it is imperative that the effects of single dopants be clarified. Beyond providing insight into functions and limitations of conventional devices, such information enables identification of new device concepts. Investigating single dopants requires sub-nanometre spatial resolution, making scanning tunnelling microscopy an ideal tool. However, dopant dynamics involve processes occurring at nanosecond timescales, posing a significant challenge to experiment. Here we use time-resolved scanning tunnelling microscopy and spectroscopy to probe and study transport through a dangling bond on silicon before the system relaxes or adjusts to accommodate an applied electric field. Atomically resolved, electronic pump-probe scanning tunnelling microscopy permits unprecedented, quantitative measurement of time-resolved single dopant ionization dynamics. Tunnelling through the surface dangling bond makes measurement of a signal that would otherwise be too weak to detect feasible. Distinct ionization and neutralization rates of a single dopant are measured and the physical process controlling those are identified.

cond-mat.mes-hall↗

arXiv2016

Multiple Silicon Atom Artificial Molecules

We present linear ensembles of dangling bond chains on a hydrogen terminated Si(100) surface, patterned in the closest spaced arrangement allowed by the surface lattice. Local density of states maps over a range of voltages extending spatially over the close-coupled entities reveal a rich energetic and spatial variation of electronic states. These artificial molecules exhibit collective electronic states resulting from covalent interaction of the constituent atoms. A pronounced electrostatic perturbation of dangling bond chain structure is induced by close placement of a negatively dangling bond. The electronic changes so induced are entirely removed, paradoxically, by addition of a second dangling bond.

cond-mat.mes-hall↗

arXiv2015

New fabrication technique for highly sensitive qPlus sensor with well-defined spring constant

A new technique for the fabrication of highly sensitive qPlus sensor for atomic force microscopy (AFM) is described. Focused ion beam was used to cut then weld onto a bare quartz tuning fork a sharp micro-tip from an electrochemically etched tungsten wire. The resulting qPlus sensor exhibits high resonance frequency and quality factor allowing increased force gradient sensitivity. Its spring constant can be determined precisely which allows accurate quantitative AFM measurements. The sensor is shown to be very stable and could undergo usual UHV tip cleaning including e-beam and field evaporation as well as in-situ STM tip treatment. Preliminary results with STM and AFM atomic resolution imaging at $4.5\,K$ of the silicon $Si(111)-7\times 7$ surface are presented.

cond-mat.mes-hall↗

arXiv2015

Scanning tunneling spectroscopy reveals a silicon dangling bond charge state transition

We report the study of single dangling bonds (DB) on the hydrogen terminated silicon (100) surface using a low temperature scanning tunneling microscope (LT-STM). By investigating samples prepared with different annealing temperatures, we establish the critical role of subsurface arsenic dopants on the DB electronic properties. We show that when the near surface concentration of dopants is depleted as a result of $1250°C$ flash anneals, a single DB exhibits a sharp conduction step in its I(V) spectroscopy that is not due to a density of states effect but rather corresponds to a DB charge state transition. The voltage position of this transition is perfectly correlated with bias dependent changes in STM images of the DB at different charge states. Density functional theory (DFT) calculations further highlight the role of subsurface dopants on DB properties by showing the influence of the DB-dopant distance on the DB state. We discuss possible theoretical models of electronic transport through the DB that could account for our experimental observations.

cond-mat.mes-hall↗

arXiv2014

Conductivity of Si(111) - 7 x 7: the role of a single atomic step

The Si(111) - 7 x 7 surface is one of the most interesting semiconductor surfaces because of its complex reconstruction and fascinating electronic properties. While it is known that the Si - 7 x 7 is a conducting surface, the exact surface conductivity has eluded consensus for decades as measured values differ by 7 orders of magnitude. Here we report a combined STM and transport measurement with ultra-high spatial resolution and minimal interaction with the sample, and quantitatively determine the intrinsic conductivity of the Si - 7 x 7 surface. This is made possible by the capability of measuring transport properties with or without a single atomic step between the measuring probes: we found that even a single step can reduce the surface conductivity by two orders of magnitude. Our first principles quantum transport calculations confirm and lend insight to the experimental observation.

cond-mat.mes-hall↗

arXiv2014

Single Electron Dynamics of an Atomic Silicon Quantum Dot on the H-Si(100) 2x1 Surface

Here we report the direct observation of single electron charging of a single atomic Dangling Bond (DB) on the H-Si(100) 2x1 surface. The tip of a scanning tunneling microscope is placed adjacent to the DB to serve as a single electron sensitive charge-detector. Three distinct charge states of the dangling bond, positive, neutral, and negative, are discerned. Charge state probabilities are extracted from the data, and analysis of current traces reveals the characteristic single electron charging dynamics. Filling rates are found to decay exponentially with increasing tip-DB separation, but are not a function of sample bias, while emptying rates show a very weak dependence on tip position, but a strong dependence on sample bias, consistent with the notion of an atomic quantum dot tunnel coupled to the tip on one side and the bulk silicon on the other.

cond-mat.mes-hall↗