arXiv subjects

Robert B. Appleby

Publications and source records attributed to Robert B. Appleby.

11 recordsLinked to original sources

arXiv2026

Controlling external injection in laser-plasma accelerators with terahertz frequency bunch manipulation

Laser-plasma wakefield acceleration (LWFA) offers ultrahigh accelerating gradients in compact setups, but the complex non-linear nature of the process makes it challenging to generate high-quality beams. Injection of electron bunches from an external source into a plasma accelerator provides a promising route to improved performance; however, electron bunches from conventional radio-frequency (RF)-based injectors suffer from non-linear compression and laser-beam asynchrony, leading to energy jitter and emittance growth. We present a fundamental concept of terahertz-controlled electron bunches for external injection into LWFA. This terahertz-frequency approach provides temporal locking between the electron beam and the drive laser, and enables the compression of high-quality beams to sub-10-fs durations before injection into the LWFA. Numerical simulations demonstrate that GeV-scale acceleration with excellent beam quality and stability -- energy jitter and energy spread around 0.2% -- can be achieved using this method. This concept opens new opportunities for stable, multi-stage laser-driven accelerators and supports the development of next-generation applications such as free-electron lasers (FELs).

physics.acc-ph↗

arXiv2025

Average-power scalability of multi-cycle terahertz sources based on periodically poled lithium niobate stacks

We demonstrate that narrowband multi-cycle terahertz (MC-THz) sources based on periodically-poled lithium niobate (PPLN) wafer stacks can be driven by high repetition-rate, high energy femtosecond ytterbium-doped lasers. Operating at 10-kHz repetition rate with up to 104 W of pump power on a 10-wafer stack, we measure 26.4 mW of THz average power for a narrowband multi-cycle source. We identify and quantify strong lensing effects causing dramatic beam focusing in 47 wafer stacks which act as a primary limitation in the current configuration, and present mitigation strategies for future scaling. This first study of high average power narrowband multi-cycle THz sources offers a path forward to Watt-level high repetition rate sources using thin lithium niobate plates.

physics.optics↗

arXiv2025

Terahertz control of relativistic electron beams for femtosecond bunching and laser-synchronized temporal locking

Femtosecond relativistic electron bunches and micro-bunch trains synchronised with femtosecond precision to external laser sources are widely sought for next-generation accelerator and photonic technologies, from extreme UV and X-ray light sources for materials science, to ultrafast electron diffraction and future high-energy physics colliders. While few-femtosecond bunches have been demonstrated, achieving the control, stability and femtosecond-level laser synchronisation remains critically out of reach. Here we demonstrate a concept for laser-driven compression of high-energy (35.5 MeV) electron bunches with temporal synchronisation to a high-power (few-TW) laser system. Laser-generated multi-cycle terahertz (THz) pulses drive periodic electron energy modulation, enabling subsequent magnetic compression capable of generating tuneable picosecond-spaced bunch trains with 30 pC total charge and 50 A peak currents, or to compress a single bunch by a factor of 27 down to 15 fs duration. The THz-driven compression simultaneously drives temporal-locking of the bunch to the THz drive laser, providing a route to femtosecond-level synchronisation, overcoming the timing jitter inherent to radio-frequency accelerators and high-power laser systems. This THz technique offers compact and flexible bunch control with unprecedented temporal synchronisation, opening a pathway to unlock new capabilities for free electron lasers, ultrafast electron diffraction and novel plasma accelerators.

physics.acc-ph↗

arXiv2025

Effects of Curved Superconducting Magnets on Beam Stability in a Compact Ion Therapy Synchrotron

Superconducting, curved magnets can reduce accelerator footprints by producing strong fields (>3T) and reducing the total number of magnets through their capability for combined-function multipolar fields, making them an attractive choice for applications such as heavy ion therapy. There exists the problem that the effect of strongly curved harmonics and fringe fields on compact accelerator beam dynamics is not well represented: existing approaches use integrated cylindrical multipoles to describe and model the fields for beam dynamics studies, which are invalid in curved coordinate systems and assume individual errors cancel out over the full machine. In the modelling of these machines, the effect of strongly curved harmonics and fringe fields on compact accelerator beam dynamics needs to properly included. An alternative approach must be introduced for capturing off-axis fields in a strongly curved magnet, which may affect long-term beam stability in a compact accelerator. In this article, we investigate the impacts of deploying a curved canted-cosine-theta (CCT) superconducting magnet in a compact medical synchrotron for the first time. We develop a method to analyse and characterise the 3D curved fields of an electromagnetic model of a CCT developed for the main bending magnets of a 27m circumference carbon ion therapy synchrotron, designed within the Heavy Ion Therapy Research Integration Plus European project, and the CERN Next Ion Medical Machine Study (NIMMS). The fields are modelled in the compact synchrotron in MAD-X/PTC to study their effects on beam dynamics and long-term beam stability. The insights gained through the methods presented allow for the optimisation of both magnet and synchrotron designs, with the potential to impact the operational performance of future ion therapy facilities.

physics.acc-ph↗

arXiv2023

Energy deposition studies for the Upgrade II of LHCb at the CERN Large Hadron Collider

The Upgrade II of the LHCb experiment is proposed to be installed during the CERN Long Shutdown 4, aiming to operate LHCb at 1.5x$10^{34}cm^{-2}s^{-1}$ that is 75 times its design luminosity and reaching an integrated luminosity of about $400 fb^{-1}$ by the end of the High Luminosity LHC era. This increase of the data sample at LHCb is an unprecedented opportunity for heavy flavour physics measurements. A first upgrade of LHCb, completed in 2022, has already implemented important changes of the LHCb detector and, for the Upgrade II, further detector improvements are being considered. Such a luminosity increase will have an impact not only on the LHCb detector but also on the LHC magnets, cryogenics and electronic equipment placed in the IR8. In fact, the LHCb experiment was conceived to work at a much lower luminosity than ATLAS and CMS, implying minor requirements for protection of the LHC elements from the collision debris and therefore a different layout around the interaction point. The luminosity target proposed for the Upgrade II requires to review the layout of the entire insertion region in order to ensure safe operation of the LHC magnets and to mitigate the risk of failure of the electronic devices. The objective of this paper is to provide an overview of the implications of the Upgrade II of LHCb in the experimental cavern and in the tunnel with a focus on the LHCb detector, electronic devices and accelerator magnets.

hep-ex↗

arXiv2022

Energy deposition studies in the LHCb insertion region from the validation to a step into the Hilumi challenge

The LHCb (Large Hadron Collider beauty) experiment at CERN aims at achieving a significantly higher luminosity than originally planned by means of two major upgrades: the Upgrade I that took place during the Long Shutdown 2 (LS2) and the Upgrade II foreseen for LS4. Such an increase in instantaneous and integrated luminosity with respect to the design values requires to reassess the radiation exposure of LHC magnets, cryogenics and electronic equipment placed in the Insertion Region 8 (IR8) around LHCb. Monte Carlo simulations are a powerful tool to understand and predict the interaction between particle showers and accelerator elements, especially in case of future scenarios. For this purpose, their validation through the comparison with available measurements is a relevant step. A detailed IR8 model, including the LHCb detector, has been implemented with the FLUKA code. The objective of this study is to evaluate radiation levels due to proton-proton collisions and benchmark the predicted dose values against Beam Loss Monitor (BLM) measurements performed in 2018. Finally, we comment on the upcoming LHC run (Run 3), featuring a first luminosity jump in LHCb.

physics.acc-ph↗

arXiv2021

Optimal Configuration of Proton Therapy Accelerators for Proton Computed Tomography RSP Resolution

The determination of relative stopping power (RSP) via proton computed tomography (pCT) of a patient is dependent in part on the knowledge of the incoming proton kinetic energies; the uncertainty in these energies is in turn determined by the proton source -- typically a cyclotron. Here we show that reducing the incident proton beam energy spread may significantly improve RSP determination in pCT. We demonstrate that the reduction of beam energy spread from the typical 1.0% (at 70MeV) down to 0.2%, can be achieved at the proton currents needed for imaging at the Paul Scherrer Institut 230MeV cyclotron. Through a simulated pCT imaging system, we find that this effect results in RSP resolutions as low as 0.2% for materials such as cortical bone, up to 1% for lung tissue. Several materials offer further improvement when the beam (residual) energy is also chosen such that the detection mechanisms used provide the optimal RSP resolution.

physics.med-ph↗

arXiv2020

FCC-hh Experimental Insertion Region Design

The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insertion region designs with a complete assessment of the main challenges, as collision debris with two orders of magnitude larger power than current colliders, beam-beam interactions in long insertions, dynamic aperture for optics with peak $β$ functions one order of magnitude above current colliders, photon background from synchrotron radiation and cross talk between the insertion regions. An alternative design avoiding the use of crab cavities with a small impact on performance is also presented.

physics.acc-ph↗

arXiv2019

Acceleration of relativistic beams using laser-generated terahertz pulses

Dielectric structures driven by laser-generated terahertz (THz) pulses may hold the key to overcoming the technological limitations of conventional particle accelerators and with recent experimental demonstrations of acceleration, compression and streaking of low-energy (sub-100 keV) electron beams, operation at relativistic beam energies is now essential to realize the full potential of THz-driven structures. We present the first THz-driven linear acceleration of relativistic 35 MeV electron bunches, exploiting the collinear excitation of a dielectric-lined waveguide driven by the longitudinal electric field component of polarization-tailored, narrowband THz pulses. Our results pave the way to unprecedented control over relativistic electron beams, providing bunch compression for ultrafast electron diffraction, energy manipulation for bunch diagnostics, and ultimately delivering high-field gradients for compact THz-driven particle acceleration.

physics.acc-ph↗

arXiv2019

Measuring the Gain of a Micro-Channel Plate/Phosphor Assembly Using a Convolutional Neural Network

This paper presents a technique to measure the gain of a single-plate micro-channel plate (MCP)/phosphor assembly by using a convolutional neural network to analyse images of the phosphor screen, recorded by a charge coupled device. The neural network reduces the background noise in the images sufficiently that individual electron events can be identified. From the denoised images, an algorithm determines the average intensity recorded on the phosphor associated with a single electron hitting the MCP. From this average single-particle-intensity, along with measurements of the charge of bunches after amplification by the MCP, we were able to deduce the gain curve of the MCP.

physics.ins-det↗

arXiv2019

Performance of the Large Hadron Collider cleaning system during the squeeze: simulations and measurements

The Large Hadron Collider (LHC) at CERN is a 7 TeV proton synchrotron, with a design stored energy of 362 MJ per beam. The high-luminosity (HL-LHC) upgrade will increase this to 675 MJ per beam. In order to protect the superconducting magnets and other sensitive equipment from quenches and damage due to beam loss, a multi-level collimation system is needed. Detailed simulations are required to understand where particles scattered by the collimators are lost around the ring in a range of machine configurations. Merlin++ is a simulation framework that has been extended to include detailed scattering physics, in order to predict local particle loss rates around the LHC ring. We compare Merlin++ simulations of losses during the squeeze (the dynamic reduction of the β-function at the interaction points before the beams are put into collision) with loss maps recorded during beam squeezes for Run 1 and 2 configurations. The squeeze is particularly important as both collimator positions and quadrupole magnet currents are changed. We can then predict, using Merlin++, the expected losses for the HL-LHC to ensure adequate protection of the machine.

physics.acc-ph↗