arXiv subjects

Robert Balas

Publications and source records attributed to Robert Balas.

14 recordsLinked to original sources

arXiv2026

CVA6-RT: an Open-Source Time-Predictable RV64 Processor for Mixed-Criticality Systems

This work presents CVA6-RT, a real-time micro-architectural extension of the CVA6 core to bound worst-case latency and reduce task's timing execution variability. CVA6-RT implements the rv64gch ISA and features advanced support for real-time execution, including TLB partitioning and locking for predictable address translation, a dynamically reconfigurable scratchpad mode in the L1 caches for deterministic memory access, and low-latency interrupt handling via an enhanced interrupt controller combined with hardware-assisted context stacking. With real-time features enabled, CVA6-RT achieves an interrupt latency of 12 cycles, comparable to that of simpler Arm Cortex-M microcontrollers, and 10x lower than the baseline CVA6 core.

cs.AR↗

arXiv2025

Co-designing a Programmable RISC-V Accelerator for MPC-based Energy and Thermal Management of Many-Core HPC Processors

Managing energy and thermal profiles is critical for many-core HPC processors with hundreds of application-class processing elements (PEs). Advanced model predictive control (MPC) delivers state-of-the-art performance but requires solving an online optimization problem over a thousand times per second (1 kHz control bandwidth), with computational and memory demands scaling with PE count. Traditional MPC approaches execute the controller on the PEs, but operating system overheads create jitter and limit control bandwidth. Running MPC on dedicated on-chip controllers enables fast, deterministic control but raises concerns about area and power overhead. In this work, we tackle these challenges by proposing a hardware-software codesign of a lightweight MPC controller, based on an operator-splitting quadratic programming solver and an embedded multi-core RISC-V controller. Key innovations include pruning weak thermal couplings to reduce model memory and ahead-of-time scheduling for efficient parallel execution of sparse triangular systems arising from the optimization problem. The proposed controller achieves sub-millisecond latency when controlling 144 PEs at 500 MHz, delivering 33x lower latency and 7.9x higher energy efficiency than a single-core baseline. Operating within a compact less than 1 MiB memory footprint, it consumes as little as 325 mW while occupying less than 1.5% of a typical HPC processor's die area.

cs.DC↗

arXiv2025

CVA6-VMRT: A Modular Approach Towards Time-Predictable Virtual Memory in a 64-bit Application Class RISC-V Processor

The increasing complexity of autonomous systems has driven a shift to integrated heterogeneous SoCs with real-time and safety demands. Ensuring deterministic WCETs and low-latency for critical tasks requires minimizing interference on shared resources like virtual memory. Existing techniques, such as software coloring and memory replication, introduce significant area and performance overhead, especially with virtualized memory where address translation adds latency uncertainty. To address these limitations, we propose CVA6-VMRT, an extension of the open-source RISC-V CVA6 core, adding hardware support for predictability in virtual memory access with minimal area overhead. CVA6-VMRT features dynamically partitioned Translation Look-aside Buffers (TLBs) and hybrid L1 cache/scratchpad memory (SPM) functionality. It allows fine-grained per-thread control of resources, enabling the operating system to manage TLB replacements, including static overwrites, to ensure single-cycle address translation for critical memory regions. Additionally, CVA6-VMRT enables runtime partitioning of data and instruction caches into cache and SPM sections, providing low and predictable access times for critical data without impacting other accesses. In a virtualized setting, CVA6-VMRT enhances execution time determinism for critical guests by 94% during interference from non-critical guests, with minimal impact on their average absolute execution time compared to isolated execution of the critical guests only. This interference-aware behaviour is achieved with just a 4% area overhead and no timing penalty compared to the baseline CVA6 core.

cs.AR↗

arXiv2025

A Reliable, Time-Predictable Heterogeneous SoC for AI-Enhanced Mixed-Criticality Edge Applications

Next-generation mixed-criticality Systems-on-chip (SoCs) for robotics, automotive, and space must execute mixed-criticality AI-enhanced sensor processing and control workloads, ensuring reliable and time-predictable execution of critical tasks sharing resources with non-critical tasks, while also fitting within a sub-2W power envelope. To tackle these multi-dimensional challenges, in this brief, we present a 16nm, reliable, time-predictable heterogeneous SoC with multiple programmable accelerators. Within a 1.2W power envelope, the SoC integrates software-configurable hardware IPs to ensure predictable access to shared resources, such as the on-chip interconnect and memory system, leading to tight upper bounds on execution times of critical applications. To accelerate mixed-precision mission-critical AI, the SoC integrates a reliable multi-core accelerator achieving 304.9 GOPS peak performance at 1.6 TOPS/W energy efficiency. Non-critical, compute-intensive, floating-point workloads are accelerated by a dual-core vector cluster, achieving 121.8 GFLOPS at 1.1 TFLOPS/W and 106.8 GFLOPS/mm2.

cs.AR↗

arXiv2025

AXI-REALM: Safe, Modular and Lightweight Traffic Monitoring and Regulation for Heterogeneous Mixed-Criticality Systems

The automotive industry is transitioning from federated, homogeneous, interconnected devices to integrated, heterogeneous, mixed-criticality systems (MCS). This leads to challenges in achieving timing predictability techniques due to access contention on shared resources, which can be mitigated using hardware-based spatial and temporal isolation techniques. Focusing on the interconnect as the point of access for shared resources, we propose AXI-REALM, a lightweight, modular, technology-independent, and open-source real-time extension to AXI4 interconnects. AXI-REALM uses a budget-based mechanism enforced on periodic time windows and transfer fragmentation to provide fair arbitration, coupled with execution predictability on real-time workloads. AXI-REALM features a comprehensive bandwidth and latency monitor at both the ingress and egress of the interconnect system. Latency information is also used to detect and reset malfunctioning subordinates, preventing missed deadlines. We provide a detailed cost assessment in a 12 nm node and an end-to-end case study implementing AXI-REALM into an open-source MCS, incurring an area overhead of less than 2%. When running a mixed-criticality workload, with a time-critical application sharing the interconnect with non-critical applications, we demonstrate that the critical application can achieve up to 68.2% of the isolated performance by enforcing fairness on the interconnect traffic through burst fragmentation, thus reducing the subordinate access latency by up to 24 times. Near-ideal performance, (above 95% of the isolated performance) can be achieved by distributing the available bandwidth in favor of the critical application.

cs.AR↗

arXiv2024

ControlPULPlet: A Flexible Real-time Multi-core RISC-V Controller for 2.5D Systems-in-package

The growing complexity of real-time control algorithms with increasing performance demands, along with the shift to 2.5D technology, drive the need for scalable controllers to manage chiplets' coupled operation in 2.5D systems-in-package. These controllers must offer real-time computing capabilities, as well as System-in-package (SiP) compatible IO interfaces for communicating with the controlled dies. Due to real-time constraints, a key challenge is minimizing the performance penalty of die-to-die communication with respect to native on-chip control interfaces. We address this challenge with ControlPULPlet, an open-source, real-time multi-core RISC-V controller designed specifically for SiP integration. ControlPULPlet features a 32-bit CV32RT core for fast interrupt handling and a specialized direct memory access engine to automate periodic sensor readout. A tightly-coupled programmable multi-core cluster for acceleration of advanced control algorithms is integrated through a dedicated AXI4 port. A flexible AXI4-compatible die-to-die (D2D) link enables efficient communication in 2.5D SiPs. We implemented and fabricated ControlPULPlet as a silicon demonstrator called Kairos in TSMC's 65nm CMOS. Kairos runs model predictive control algorithms at up to 290 MHz in a 30 mW power envelope. The D2D link attains a peak duplex transfer rate of 51 Gbit/s at 200 MHz, at the minimal costs of just 7.6 kGE in PHY area per channel, adding just 2.9% to the total system area.

cs.AR↗

arXiv2024

vCLIC: Towards Fast Interrupt Handling in Virtualized RISC-V Mixed-criticality Systems

The widespread diffusion of compute-intensive edge-AI workloads and the stringent demands of modern autonomous systems require advanced heterogeneous embedded architectures. Such architectures must support high-performance and reliable execution of parallel tasks with different levels of criticality. Hardware-assisted virtualization is crucial for isolating applications concurrently executing these tasks under real-time constraints, but interrupt virtualization poses challenges in ensuring transparency to virtual guests while maintaining real-time system features, such as interrupt vectoring, nesting, and tail-chaining. Despite its rapid advancement to address virtualization needs for mixed-criticality systems, the RISC-V ecosystem still lacks interrupt controllers with integrated virtualization and real-time features, currently relying on non-deterministic, bus-mediated message-signaled interrupts (MSIs) for virtualization. To overcome this limitation, we present the design, implementation, and in-system assessment of vCLIC, a virtualization extension to the RISC-V CLIC fast interrupt controller. Our approach achieves 20x interrupt latency speed-up over the software emulation required for handling non-virtualization-aware systems, reduces response latency by 15% compared to existing MSI-based approaches, and is free from interference from the system bus, at an area cost of just 8kGE when synthesized in an advanced 16nm FinFet technology.

cs.AR↗

arXiv2024

SentryCore: A RISC-V Co-Processor System for Safe, Real-Time Control Applications

In the last decade, we have witnessed exponential growth in the complexity of control systems for safety-critical applications (automotive, robots, industrial automation) and their transition to heterogeneous mixed-criticality systems (MCSs). The growth of the RISC-V ecosystem is creating a major opportunity to develop open-source, vendor-neutral reference platforms for safety-critical computing. We present SentryCore, a reliable, real-time, self-contained, open-source mega-IP for advanced control functions that can be seamlessly integrated into Systems-on-Chip, e.g., for automotive applications, through industry-standard Advanced eXtensible Interface 4 (AXI4). SentryCore features three embedded RISC-V processor cores in lockstep with error-correcting code (ECC) protected data memory for reliable execution of any safety-critical application. Context switching is accelerated to under 110 clock cycles via a RISC-V core-local interrupt controller (CLIC) and dedicated hardware extensions, while a timer-based direct memory access (DMA) engine streamlines sensor data readout during periodic control loops. SentryCore was implemented in Intel's 16nm process node and tested with FreeRTOS, ThreadX, and RTIC software support.

cs.AR↗

arXiv2023

PELS: A Lightweight and Flexible Peripheral Event Linking System for Ultra-Low Power IoT Processors

A key challenge for ultra-low-power (ULP) devices is handling peripheral linking, where the main central processing unit (CPU) periodically mediates the interaction among multiple peripherals following wake-up events. Current solutions address this problem by either integrating event interconnects that route single-wire event lines among peripherals or by general-purpose I/O processors, with a strong trade-off between the latency, efficiency of the former, and the flexibility of the latter. In this paper, we present an open-source, peripheral-agnostic, lightweight, and flexible Peripheral Event Linking System (PELS) that combines dedicated event routing with a tiny I/O processor. With the proposed approach, the power consumption of a linking event is reduced by 2.5 times compared to a baseline relying on the main core for the event-linking process, at a low area of just 7 kGE in its minimal configuration, when integrated into a ULP RISC-V IoT processor.

cs.AR↗

arXiv2023

AXI-REALM: A Lightweight and Modular Interconnect Extension for Traffic Regulation and Monitoring of Heterogeneous Real-Time SoCs

The increasing demand for heterogeneous functionality in the automotive industry and the evolution of chip manufacturing processes have led to the transition from federated to integrated critical real-time embedded systems (CRTESs). This leads to higher integration challenges of conventional timing predictability techniques due to access contention on shared resources, which can be resolved by providing system-level observability and controllability in hardware. We focus on the interconnect as a shared resource and propose AXI-REALM, a lightweight, modular, and technology-independent real-time extension to industry-standard AXI4 interconnects, available open-source. AXI-REALM uses a credit-based mechanism to distribute and control the bandwidth in a multi-subordinate system on periodic time windows, proactively prevents denial of service from malicious actors in the system, and tracks each manager's access and interference statistics for optimal budget and period selection. We provide detailed performance and implementation cost assessment in a 12nm node and an end-to-end functional case study implementing AXI-REALM into an open-source Linux-capable RISC-V SoC. In a system with a general-purpose core and a hardware accelerator's DMA engine causing interference on the interconnect, AXI-REALM achieves fair bandwidth distribution among managers, allowing the core to recover 68.2 % of its performance compared to the case without contention. Moreover, near-ideal performance (above 95 %) can be achieved by distributing the available bandwidth in favor of the core, improving the worst-case memory access latency from 264 to below eight cycles. Our approach minimizes buffering compared to other solutions and introduces only 2.45 % area overhead compared to the original SoC.

cs.AR↗

arXiv2023

Well-being in isolation: Exploring artistic immersive virtual environments in a simulated lunar habitat to alleviate asthenia symptoms

Revived interest in lunar and planetary exploration is heralding a new era for human spaceflight, characterized by frequent strain on astronaut's mental well-being, which stems from increased exposure to isolated, confined, and extreme (ICE) conditions. Whilst Immersive Virtual Reality (IVR) has been employed to facilitate self-help interventions to mitigate challenges caused by isolated environments in several domains, its applicability in support of future space expeditions remains largely unexplored. To address this limitation, we administered the use of distinct IVR environments to crew members (n=5) partaking in a simulated lunar habitat study. Utilizing a Bayesian approach to scrutinize small group data, we discovered a significant relationship between IVR usage and a reduction in perceived stress-related symptoms, particularly those associated with asthenia (syndrome often linked to chronic fatigue and weakness; a condition characterized by feelings of energy depletion or exhaustion that can be amplified in ICE conditions). The reductions were most prominent with the use of interactive virtual environments. The 'Aesthetic Realities' - virtual environments conceived as art exhibits - received exceptional praise from our participants. These environments mark a fascinating convergence of art and science, holding promise to mitigate effects related to isolation in spaceflight training and beyond.

cs.HC↗

arXiv2023

CV32RT: Enabling Fast Interrupt and Context Switching for RISC-V Microcontrollers

Processors using the open RISC-V ISA are finding increasing adoption in the embedded world. Many embedded use cases have real-time constraints and require flexible, predictable, and fast reactive handling of incoming events. However, RISC- V processors are still lagging in this area compared to more mature proprietary architectures, such as ARM Cortex-M and TriCore, which have been tuned for years. The default interrupt controller standardized by RISC-V, the Core Local Interruptor (CLINT), lacks configurability in prioritization and preemption of interrupts. The RISC-V Core Local Interrupt Controller (CLIC) specification addresses this concern by enabling pre-emptible, low-latency vectored interrupts while also envisioning optional extensions to improve interrupt latency. In this work, we implement a CLIC for the CV32E40P, an industrially supported open-source 32-bit MCU-class RISC-V core, and enhance it with fastirq: a custom extension that provides interrupt latency as low as 6 cycles. We call CV32RT our enhanced core. To the best of our knowledge, CV32RT is the first fully open-source RV32 core with competitive interrupt-handling features compared to the Arm Cortex-M series and TriCore. The proposed extensions are also demonstrated to improve task context switching in real-time operating systems.

cs.AR↗

arXiv2023

Towards a RISC-V Open Platform for Next-generation Automotive ECUs

The complexity of automotive systems is increasing quickly due to the integration of novel functionalities such as assisted or autonomous driving. However, increasing complexity poses considerable challenges to the automotive supply chain since the continuous addition of new hardware and network cabling is not considered tenable. The availability of modern heterogeneous multi-processor chips represents a unique opportunity to reduce vehicle costs by integrating multiple functionalities into fewer Electronic Control Units (ECUs). In addition, the recent improvements in open-hardware technology allow to further reduce costs by avoiding lock-in solutions. This paper presents a mixed-criticality multi-OS architecture for automotive ECUs based on open hardware and open-source technologies. Safety-critical functionalities are executed by an AUTOSAR OS running on a RISC-V processor, while the Linux OS executes more advanced functionalities on a multi-core ARM CPU. Besides presenting the implemented stack and the communication infrastructure, this paper provides a quantitative gap analysis between an HW/SW optimized version of the RISC-V processor and a COTS Arm Cortex-R in terms of real-time features, confirming that RISC-V is a valuable candidate for running AUTOSAR Classic stacks of next-generation automotive MCUs.

cs.AR↗

arXiv2023

ControlPULP: A RISC-V On-Chip Parallel Power Controller for Many-Core HPC Processors with FPGA-Based Hardware-In-The-Loop Power and Thermal Emulation

High-Performance Computing (HPC) processors are nowadays integrated Cyber-Physical Systems demanding complex and high-bandwidth closed-loop power and thermal control strategies. To efficiently satisfy real-time multi-input multi-output (MIMO) optimal power requirements, high-end processors integrate an on-die power controller system (PCS). While traditional PCSs are based on a simple microcontroller (MCU)-class core, more scalable and flexible PCS architectures are required to support advanced MIMO control algorithms for managing the ever-increasing number of cores, power states, and process, voltage, and temperature variability. This paper presents ControlPULP, an open-source, HW/SW RISC-V parallel PCS platform consisting of a single-core MCU with fast interrupt handling coupled with a scalable multi-core programmable cluster accelerator and a specialized DMA engine for the parallel acceleration of real-time power management policies. ControlPULP relies on FreeRTOS to schedule a reactive power control firmware (PCF) application layer. We demonstrate ControlPULP in a power management use-case targeting a next-generation 72-core HPC processor. We first show that the multi-core cluster accelerates the PCF, achieving 4.9x speedup compared to single-core execution, enabling more advanced power management algorithms within the control hyper-period at a shallow area overhead, about 0.1% the area of a modern HPC CPU die. We then assess the PCS and PCF by designing an FPGA-based, closed-loop emulation framework that leverages the heterogeneous SoCs paradigm, achieving DVFS tracking with a mean deviation within 3% the plant's thermal design power (TDP) against a software-equivalent model-in-the-loop approach. Finally, we show that the proposed PCF compares favorably with an industry-grade control algorithm under computational-intensive workloads.

cs.AR↗