arXiv subjects

Robert Boyd

Publications and source records attributed to Robert Boyd.

At least 19 recordsLinked to original sources

arXiv2026

Strain engineering of ultrafast magnetism in the room-temperature vdW ferromagnet Fe3GaTe2

Controlling ultrafast magnetic dynamics is critical to understanding nonequilibrium spin interactions and advancing high-speed spintronics. However, a lack of efficient in situ tuning strategies leaves most ultrafast studies largely dependent on the intrinsic properties of the individual materials. Here we demonstrate continuous strain tuning of both the equilibrium magnetic response and ultrafast demagnetization dynamics in the room-temperature van der Waals ferromagnet Fe3GaTe2. Applying up to 4.2% uniaxial tensile strain increases the coercive field from nearly zero to 100 Oe, consistent with an enhancement of the effective perpendicular magnetic anisotropy. Time-resolved magneto-optical Kerr effect measurements further reveal strain-accelerated ultrafast demagnetization, with 1.2% tensile strain reducing the characteristic demagnetization time by approximately 20%. Remarkably, strain accesses an accelerated demagnetization regime that cannot be reached simply by increasing pump fluence in the unstrained sample. Combined with first-principles calculations, our results resolve that the applied strain modifies the spin-lattice energy transfer, leading to the observed accelerated demagnetization. These findings establish mechanical strain as an effective route for on-demand control of ultrafast magnetic dynamics while reducing the required optical energy by reconfiguring the magnetic energy landscape and associated spin-relaxation pathways.

cond-mat.mtrl-sci↗

arXiv2026

Lead-Time Simple Exponential Smoothing as a Configurable, Uncertainty-Aware Framework for Adaptive Radiotherapy Monitoring

Lead-time simple exponential smoothing (LT-SES) is developed as a configurable, uncertainty-aware framework for adaptive radiotherapy monitoring, in which a prospectively selected smoothing parameter alpha determines how strongly new observations update the current level. Using the standard innovations formulation of SES, closed-form expressions were derived for the predictive mean and variance of the remaining-course aggregate, enabling prediction intervals and conditional threshold probabilities to be updated after each fraction. OAR mean-dose time series from 32 prostate and 23 HN treatment courses were evaluated at prespecified $\alpha$-values from 0.1 to 1.0 across remaining-course horizons of 5, 10, 15, and 20 fractions, with a running-mean benchmark. Two parotid time series illustrated threshold probabilities, probability maps, and probability-weighted rank scores for $\alpha$ = 0.25, 0.50, and 1.0. Prediction intervals widened with forecast horizon and with increasing $\alpha$. Undercoverage was greatest for the running-mean benchmark and the lowest positive $\alpha$-values, especially at longer horizons, whereas $\alpha \geq 0.4$ produced wider intervals with coverage generally above nominal. In the parotid examples, lower $\alpha$-values provided greater stability, while higher $\alpha$-values responded more rapidly to short-term variation and sustained level shifts. Probability weighting produced greater numerical separation than the conventional scalar comparator and identified the sustained-shift time series several fractions before the scalar ratio crossed unity. LT-SES contextualizes projected scalar threshold differences using time series-specific interfractional innovation scale and remaining-course uncertainty. Its probability-scale outputs and rank scores provide a relative, uncertainty-aware complement to conventional scalar dose-metric monitoring.

physics.med-ph↗

arXiv2025

Self-focusing of high-intensity beams with grid structures

Laser beams with high optical power propagating in a Kerr medium can undergo self-focusing when their power exceeds a critical power determined by the optical properties of the medium. The highly concentrated energy close to the in the region of the self-focus can lead to other nonlinear phenomena and cause significant irreversible damage to the material. We propose a transverse grid beam structure that effectively suppresses self-focusing even in the absence of other competing effects through the redistribution of optical power by inter-beamlet nonlinear interaction. We find that a beam with a $N \times N$ grid structure with optimized lattice spacing undergoes a dimension-dependent multi-stage self-focusing. We also identify specific grid layouts that can increase the total transmitted power beyond that permitted by the critical level of self-focusing for each beamlet. Lastly, we derive a general numerical relation between the optimal grid lattice spacing and the size of beamlets. Our results could potentially inform the use of beam shaping to prevent damage to optical components in high-powered and directed-energy applications.

physics.optics↗

arXiv2025

Quantum Optical Techniques for Biomedical Imaging

Quantum imaging is emerging as a transformative approach for biomedical applications, applying nonclassical properties of light, such as entanglement, squeezing, and quantum correlations, to overcome fundamental limits of conventional techniques. These methods promise superior spatial resolution, enhanced signal-to-noise ratios, improved phase sensitivity, and reduced radiation dose, for potentially safer and more precise imaging for delicate biological samples. Here, we present an overview of quantum optical biomedical imaging technologies as well as quantum-inspired imaging methods, including quantum optical coherence tomography, quantum optical microscopy, ghost imaging, multi-parameter quantum imaging, and imaging with quantum-grade cameras. We describe the operating principles, biomedical applications, and unique advantages of each approach, along with the specific challenges for their translation into real-life practice. This review aims to guide future research toward advancing quantum imaging from experimental demonstrations to impactful biomedical tools.

quant-ph↗

arXiv2025

Can We Conjugate the Orbital Angular Momentum of a Single Photon with Nonlinear Optics? A Theoretical Analysis

Stimulated parametric down-conversion (StimPDC) produces an idler beam that exhibits a phase conjugate of the spatial structure of the classical seed beam. Extending this effect to the single-photon regime can, in principle, enable the control of the orbital angular momentum of single photons. However, its experimental implementation remains challenging due to the lower photon flux of realistic single-photon sources compared to a classical pump beam, which causes the StimPDC process to occur less frequently compared to its spontaneous counterpart. To overcome this, we propose a cascaded parametric down-conversion scheme, in which the signal photon from a spontaneously down-converted pair seeds the StimPDC process, while the idler photon heralds the seed's presence. This configuration uses coincidence detection to effectively post-select for stimulated events among the background of spontaneous contributions. We show that phase conjugation at the single-photon level manifests as a bias towards equal orbital angular momentum between the heralding idler and the stimulated idler. Our results offer a practical route to manipulate single-photon correlations in the orbital angular momentum degree of freedom and could have implications for applications such as free-space quantum communication and quantum-enhanced sensing.

physics.optics↗

arXiv2025

Full-field mapping of spatially varying polarization entanglement generated from spontaneous parametric down-conversion

Two-photon states generated from spontaneous parametric down-conversion (SPDC) can display entanglement in all degrees of freedom (DoFs) of light, including spatial, temporal, and polarization. The coupling between different DoFs of a two-photon state has been shown to display rich structures that enable novel and robust information processing schemes. While existing literature has studied these couplings by post-selecting the SPDC field, a comprehensive understanding of the inherent spatial-polarization coupling produced in the SPDC process is still lacking. This work produces a full spatial map of the polarization entanglement generated across the entire SPDC field, which contains an entire class of near-maximally polarization-entangled states with an average concurrence of 0.8303 +/- 0.0004. The spatial-polarization coupling manifests as radially or linearly varying polarization-entangled states, whose wavefunctions are dependent on the transverse momenta of the down-converted photons and the pump beam, respectively. Our study lays important groundwork for further exploiting the coupling between entanglement in different DoFs for future quantum technologies

quant-ph↗

arXiv2023

Dynamic evolution of internal stress, grain growth, and crystallographic texture in arc-evaporated AlTiN thin films using in-situ synchrotron x-ray diffraction

Understanding the nucleation and growth of polycrystalline thin films is a long-standing goal. Polycrystalline films have many grains with different orientations that affect thin-film properties. Numerous studies have been done to determine these grain size and their preferred crystallographic orientation as well as stress in films. However most past studies have either employed an ex-situ methodology or only monitor the development of macroscopic stress in real-time. There has never been any research done on the simultaneous determination of crystallographic texture, grain size, and microscopic stress in polycrystalline thin films. In this study, we simultaneously monitored the generation and temporal evolution of texture, grain size, and internal stress in cathodic arc evaporated Al0.50Ti0.50N thin films using a bespoke deposition apparatus designed for use with 2-dimensional synchrotron x-ray diffraction technique. The influence of the substrate temperature is investigated in terms of the emergence and development of texture, grain size and stress evolution. A dynamic evolution of the crystallographic texture is observed as the overall film thickness varies. We clearly resolved two regime of films growth based on stress evolution. Beyond a threshold grain size (~ 14 nm), the stress scales inversely to the average grain sizes, and as the film thickness increases, immediate compressive stress relaxation was seen. An extensive ex-situ evaluation of thin films using electron microscopies and electron diffraction was performed to support the in-situ x-ray diffraction results.

cond-mat.mtrl-sci↗

arXiv2023

Enhanced Thermoelectric Properties By Embedding Fe Nanoparticles Into CrN Films For Energy Harvesting Applications

Nanostructured materials and nanocomposites have shown great promise for improving the efficiency of thermoelectric materials. Herein, Fe nanoparticles were imbedded into a CrN matrix by combining two physical vapor deposition approaches, namely high-power impulse magnetron sputtering and a nanoparticle gun. The combination of these techniques allowed the formation of nanocomposites in which the Fe nanoparticles remained intact without intermixing with the matrix. The electrical and thermal transport properties of the nanocomposites were investigated and compared to a monolithic CrN film. The measured thermoelectric properties revealed an increase in the Seebeck coefficient, with a decrease of hall carrier concentration and an increase of the electron mobility which could be explained by energy filtering by internal phases created at the NP/matrix interface. The thermal conductivity of the final nanocomposite was reduced from 4.8 W m-1K-1 to a minimum of 3.0 W m-1K-1 W. This study shows prospects for the nanocomposite synthesis process using nanoparticles and its use in improving the thermoelectric properties of coatings.

cond-mat.mtrl-sci↗

arXiv2023

In-situ real-time evolution of intrinsic stresses and microstructure during growth of cathodic arc deposited (Al,Ti)N coatings

The residual stress plays a vital role in determination of the device performance that uses thin films coating and thus the accurate determination of stress and its optimization with process parameters is an ongoing research work for many decades. In line with this, the microscopic origin of the stress at the atomic scale and its development during the thin film deposition is a matter of major scientific interests. The development of stress is a complex phenomenon and has a complex dependence to process parameters, film microstructure and its morphology. In this work, by utilizing a custom-designed cathodic arc deposition system and synchrotron radiation based 2D x-ray diffraction (XRD) technique, we determine the real-time evolution of stress, crystallite sizes and their preferential orientations of Aluminum-Titanium-Nitride (AlxTi1-xN) films with varied Al-content (x=0.0, 0.25, 0.50, and 0.67) on Si-100 substrate. The energies of incoming ions and hence stress in the films is tuned by applying different direct current substrate bias (Vs = floating potential, -20, -40, -60, -80, and -100 V). The instantaneous stress is evaluated by the well-known d vs. sin2{\psi} technique, while crystallite sizes are determined by analyzing line profiles of x-ray diffractograms. The evolution of stress and crystallite sizes are modelled with multiple numerical models from which kinetic parameters associated with the thin film depositions are extracted. The ex-situ microstructure characterizations of AlxTi1-xN coatings are carried out by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The formation of ex-situ microstructure of the films is discussed considering the results obtained from in-situ XRD data. Finally, we demonstrate that the method utilized here is a powerful approach towards estimation of the fracture toughness of thin film coatings.

cond-mat.mtrl-sci↗

arXiv2022

Phase formation in CrFeCoNi nitride thin films

As a single-phase alloy, CrFeCoNi is a face centered cubic (fcc) material related to the archetypical high-entropy Cantor alloy CrFeCoNiMn. For thin films, CrFeCoNi of approximately equimolar composition tends to assume an fcc structure when grown at room temperature by magnetron sputtering. However, the single-phase solid solution state is typically not achieved for thin films grown at higher temperatures. The same holds true for Cantor alloy-based ceramics (nitrides and oxides), where phase formation is extremely sensitive to process parameters such as the amount of reactive gas. This study combines theoretical and experimental methods to understand the phase formation in nitrogen-containing CrFeCoNi thin films. Density functional theory calculations considering three competing phases (CrN, Fe-Ni and Co) show that the free energy of mixing, delta G of (CrFeCoNi)1-xNx solid solutions has a maximum at x = 0.20-0.25, and delta G becomes lower when x less than 0.20, greater than 0.25. Thin films of (CrFeCoNi)1-xNx (x = 0.14-0.41) grown by magnetron sputtering show stabilization of the metallic fcc when x lesser than or equal to 0.22 and the stabilization of the NaCl B1 structure when x is greater than 0.33, consistent with the theoretical prediction. In contrast, films with intermediate amounts of nitrogen (x = 0.22) grown at higher temperatures show segregation into multiple phases of CrN, Fe-Ni-rich and Co. These results offer an explanation for the requirement of kinetically limited growth conditions at low temperature for obtaining single-phase CrFeCoNi Cantor-like nitrogen-containing thin films and are of importance for understanding the phase-formation mechanisms in multicomponent ceramics.

cond-mat.mtrl-sci↗

arXiv2022

Effect of substrate roughness and material selection on the microstructure of sputtering deposited boron carbide thin films

Amorphous boron carbide (B4C) thin films are by far the most popular form for the neutron converting layers in the 10B-based neutron detectors, which are a rising trend in detector technologies in response to the increasing scarcity and price of 3He, the standard material for neutron detection. The microstructure of the B4C films is closely related to the important properties, e.g. density and adhesion, for the converting layers, which eventually affect the detection efficiency and the long-term stability of the detectors. To study the influence from substrates of different roughness and materials, the B4C films were deposited on polished Si substrates with Al, Ti, and Cu buffer layers and unpolished Si, Al, Ti, and Cu substrates by direct current magnetron sputtering at a substrate temperature of 623 K. The tapered columnar grains and nodular defects, generally observed in SEM images, indicated a strong shadowing effect where voids were introduced around the grains. The change in the grain size did not show a direct dependence to the substrate roughness, acquired from the surface profile, nor to the mass density of the films, obtained from reflectivity patterns. However, films with non-uniform size of columnar grains were deposited on substrates with high skewness, leading to a drop of mass density from ~95 % down to ~70 % of tabulated bulk density. On the other hand, similar microstructures and mass density were obtained from the films deposited on Al, Ti, and Cu of different roughness and good adhesion were observed from cross-cut adhesion tests, showing the reliability of sputtering deposited B4C films on common structural materials in neutron detectors.

cond-mat.mtrl-sci↗

arXiv2021

Magnetically collected platinum/nickel alloy nanoparticles -- insight into low noble metal content catalysts for hydrogen evolution reaction

The hydrogen evolution reaction (HER) is a key process in electrochemical water splitting. To lower the cost and environmental impact of this process, it is highly motivated to develop electrocatalysts with low or no content of noble metals. Here we report on a novel and ingenious synthesis of hybrid PtxNi1-x electrocatalysts in the form of a nanoparticle-necklace structure named nanotrusses, with very low noble metal content. The nanotruss structure possesses important features, such as good conductivity, high surface area, strong interlinking and substrate adhesion, which renders for an excellent HER activity. Specifically, the best performing Pt0.05Ni0.95 sample, demonstrates a Tafel slope of 30 mV dec-1 in 0.5 M H2SO4, and an overpotential of 20 mV at a current density of 10 mA cm-2 with high stability. The impressive catalytic performance is further rationalized in a theoretical study, which provides insight into the mechanism for how such small platinum content can allow for close-to-optimal adsorption energies for hydrogen.

cond-mat.mtrl-sci↗

arXiv2020

Nanowire design by magnetic collection of Fe, Ni and/or FeNi-alloy nanoparticles

A method for growing nanoparticles with different elemental compositions simply by changing pulsing parameters in a power supply is demonstrated. The technique is based on high power pulsed hollow cathode sputtering, and the difference in particle composition ranges from pure Fe and Ni, to fully alloyed FeNi particles. Several pulses, or bursts, from a hollow cathode are needed in order to grow a nanoparticle using high power pulses. With this in mind, we devised a setup with two hollow cathodes of different material, Fe and Ni, situated in the vicinity of each other. By using two power supplies and a synchronization unit, the number and size of pulses of each element into the growth regime of the nanoparticles is controlled, and a tunable mixture of ions of the two elements is ensured. We here show that the two-target high power hollow cathode sputtering unit can be a powerful tool for rapid prototyping of more advanced, customized, nanoparticles, which can be of great importance for numerous applications.

cond-mat.mes-hall↗

arXiv2019

Spatial Sampling of Terahertz Fields with Sub-wavelength Accuracy via Probe Beam Encoding

Recently, computational sampling methods have been implemented to spatially characterize terahertz (THz) fields. Previous methods usually rely on either specialized THz devices such as THz spatial light modulators, or complicated systems requiring assistance from photon-excited free-carriers with high-speed synchronization among multiple optical beams. Here, by spatially encoding an 800 nm near-infrared (NIR) probe beam through the use of an optical SLM, we demonstrate a simple sampling approach that can probe THz fields with a single-pixel camera. This design does not require any dedicated THz devices, semiconductors or nanofilms to modulate THz fields. Through the use of computational algorithms, we successfully measure 128$\times$128 field distributions with a 62 $μm$ transverse spatial resolution, more than 15 times smaller than the central wavelength of the THz signal (940 $μm$). Benefitting from the non-invasive nature of THz radiation and sub-wavelength resolution of our system, this simple approach can be used in applications such as biomedical sensing, inspection of flaws. in industrial products, and so on.

physics.optics↗

arXiv2018

Low temperature (Ts/Tm < 0.1) epitaxial growth of HfN/MgO(001) via reactive HiPIMS with metal-ion synchronized substrate bias

Low-temperature epitaxial growth of refractory transition-metal nitride thin films by means of physical vapor deposition has been a recurring theme in advanced thin-film technology for several years. In the present study, 150-nm-thick epitaxial HfN layers are grown on MgO(001) by reactive high-impulse magnetron sputtering (HiPIMS) with no external substrate heating. Maximum film growth temperatures Ts due to plasma heating range from 70-150 °C, corresponding to Ts/Tm = 0.10-0.12 (in which Tm is the HfN melting point in K). During HiPIMS, gas and sputtered-metal ion fluxes incident at the growing film surface are separated in time due to strong gas rarefaction and the transition to a metal-ion dominated plasma. In the present experiments, a negative bias of 100 V is applied to the substrate, either continuously during the entire deposition or synchronized with the metal-rich portion of the ion flux. Two different sputtering-gas mixtures, Ar/N2 and Kr/N2, are employed in order to probe effects associated with the noble-gas mass and ionization potential. The combination of x-ray diffraction, high-resolution reciprocal-lattice maps, and high-resolution cross-sectional transmission electron microscopy analyses establish that all HfN films have a cube-on-cube orientational relationship with the substrate, i.e., [001]HfN||[001]MgO and (100)HfN||(100)MgO. Layers grown with continuous substrate bias, in either Ar/N2 or Kr/N2, exhibit a relatively high mosaicity and a high concentration of trapped inert gas. In distinct contrast, layers grown in Kr/N2 with the substrate bias synchronized to the metal-ion-rich portion of HiPIMS pulses, have much lower mosaicity, no measurable inert-gas incorporation, and a hardness of 25.7 GPa, in good agreement with results for epitaxial HfN(001) layers grown at Ts = 650 C (Ts/Tm = 0.26).

cond-mat.mtrl-sci↗

arXiv2018

Light, the universe, and everything -- 12 Herculean tasks for quantum cowboys and black diamond skiers

The Winter Colloquium on the Physics of Quantum Electronics (PQE) has been a seminal force in quantum optics and related areas since 1971. It is rather mindboggling to recognize how the concepts presented at these conferences have transformed scientific understanding and human society. In January, 2017, the participants of PQE were asked to consider the equally important prospects for the future, and to formulate a set of questions representing some of the greatest aspirations in this broad field. The result is this multi-authored paper, in which many of the world's leading experts address the following fundamental questions: (1) What is the future of gravitational wave astronomy? (2) Are there new quantum phases of matter away from equilibrium that can be found and exploited - such as the time crystal? (3) Quantum theory in uncharted territory: What can we learn? (4) What are the ultimate limits for laser photon energies? (5) What are the ultimate limits to temporal, spatial, and optical resolution? (6) What novel roles will atoms play in technology? (7) What applications lie ahead for nitrogen-vacancy centers in diamond? (8) What is the future of quantum coherence, squeezing, and entanglement for enhanced superresolution and sensing? (9) How can we solve (some of) humanity's biggest problems through new quantum technologies? (10) What new understanding of materials and biological molecules will result from their dynamical characterization with free electron lasers? (11) What new technologies and fundamental discoveries might quantum optics achieve by the end of this century? (12) What novel topological structures can be created and employed in quantum optics?

quant-ph↗

arXiv2016

Enhanced Thermal Object Imaging by Photon Addition or Subtraction

Long-baseline interferometry (LBI) is used to reconstruct the image of faint thermal objects. The image quality, for a given exposure time, is in general limited by a low signal-to-noise ratio (SNR). We show theoretically that a significant increase of the SNR, in a LBI, is possible by adding or subtracting photons to the thermal beam. At low photon counts, photon addition-subtraction technology strongly enhances the image quality. We have experimentally realized a nondeterministic physical protocol for photon subtraction. Our theoretical predictions are supported by experimental results.

physics.optics↗

arXiv2016

Finite-key security analysis for multilevel quantum key distribution

We present a detailed security analysis of a d-dimensional quantum key distribution protocol based on two and three mutually unbiased bases (MUBs) both in an asymptotic and finite key length scenario. The finite secret key rates are calculated as a function of the length of the sifted key by (i) generalizing the uncertainly relation-based insight from BB84 to any d-level 2-MUB QKD protocol and (ii) by adopting recent advances in the second-order asymptotics for finite block length quantum coding (for both d-level 2- and 3-MUB QKD protocols). Since the finite and asymptotic secret key rates increase with d and the number of MUBs (together with the tolerable threshold) such QKD schemes could in principle offer an important advantage over BB84. We discuss the possibility of an experimental realization of the 3-MUB QKD protocol with the orbital angular momentum degrees of freedom of photons.

quant-ph↗