arXiv subjects

Robert Caiming Qiu

Publications and source records attributed to Robert Caiming Qiu.

52 records · Page 3Linked to original sources

arXiv2023

Asymptotic CRB Analysis of Random RIS-Assisted Large-Scale Localization Systems

This paper studies the performance of a randomly RIS-assisted multi-target localization system, in which the configurations of the RIS are randomly set to avoid high-complexity optimization. We first focus on the scenario where the number of RIS elements is significantly large, and then obtain the scaling law of Cramér-Rao bound (CRB) under certain conditions, which shows that CRB decreases in the third or fourth order as the RIS dimension increases. Second, we extend our analysis to large systems where both the number of targets and sensors is substantial. Under this setting, we explore two common RIS models: the constant module model and the discrete amplitude model, and illustrate how the random RIS configuration impacts the value of CRB. Numerical results demonstrate that asymptotic formulas provide a good approximation to the exact CRB in the proposed randomly configured RIS systems.

cs.IT↗

arXiv2023

Wireless Regional Imaging through Reconfigurable Intelligent Surfaces: Passive Mode

In this paper, we propose a multi-RIS-aided wireless imaging framework in 3D facing the distributed placement of multi-sensor networks. The system creates a randomized reflection pattern by adjusting the RIS phase shift, enabling the receiver to capture signals within the designated space of interest (SoI). Firstly, a multi-RIS-aided linear imaging channel modeling is proposed. We introduce a theoretical framework of computational imaging to recover the signal strength distribution of the SOI. For the RIS-aided imaging system, the impact of multiple parameters on the performance of the imaging system is analyzed. The simulation results verify the correctness of the proposal. Furthermore, we propose an amplitude-only imaging algorithm for the RIS-aided imaging system to mitigate the problem of phase unpredictability. Finally, the performance verification of the imaging algorithm is carried out by proof of concept experiments under reasonable parameter settings.

eess.IV↗

arXiv2023

Wireless Communications in Cavity: A Reconfigurable Boundary Modulation based Approach

This paper explores the potential wireless communication applications of Reconfigurable Intelligent Surfaces (RIS) in reverberant wave propagation environments. Unlike in free space, we utilize the sensitivity to boundaries of the enclosed electromagnetic (EM) field and the equivalent perturbation of RISs. For the first time, we introduce the framework of reconfigurable boundary modulation in the cavities . We have proposed a robust boundary modulation scheme that exploits the continuity of object motion and the mutation of the codebook switch, which achieves pulse position modulation (PPM) by RIS-generated equivalent pulses for wireless communication in cavities. This approach achieves around 2 Mbps bit rate in the prototype and demonstrates strong resistance to channel's frequency selectivity resulting in an extremely low bit error rate (BER).

eess.SY↗

arXiv2023

A Wi-Fi Signal-Based Human Activity Recognition Using High-Dimensional Factor Models

Passive sensing techniques based on Wi-Fi signals have emerged as a promising technology in advanced wireless communication systems due to their widespread application and cost-effectiveness. However, the proliferation of low-cost Internet of Things (IoT) devices has led to dense network deployments, resulting in increased levels of noise and interference in Wi-Fi environments. This, in turn, leads to noisy and redundant Channel State Information (CSI) data. As a consequence, the accuracy of human activity recognition based on Wi-Fi signals is compromised. To address this issue, we propose a novel CSI data signal extraction method. We established a human activity recognition system based on the Intel 5300 network interface cards (NICs) and collected a dataset containing six categories of human activities. Using our approach, signals extracted from the CSI data serve as inputs to machine learning (ML) classification algorithms to evaluate classification performance. In comparison to ML methods based on Principal Component Analysis (PCA), our proposed High-Dimensional Factor Model (HDFM) method improves recognition accuracy by 6.8%.

eess.SY↗

arXiv2023

Design of Reconfigurable Intelligent Surfaces for Wireless Communication: A Review

This paper addresses the hardware structure of Reconfigurable Intelligent Surfaces (RIS) and presents a comprehensive overview of RIS design, considering both unit design and prototype systems. It commences by tracing the evolutionary trajectory of RIS, originating from static cell-structured hypersurfaces. The article conducts a meticulous examination from the standpoint of adaptability, elucidating the diverse array of unit structures and design philosophies that underlie existing RIS frameworks. Following this, the study systematically categorizes and synthesizes channel modeling research for RIS-facilitated wireless communication, leveraging both physical insights and statistical data. Additionally, the article provides a detailed exposition of current RIS experimental setups and their corresponding empirical findings, delving into the attributes of prototype design and system functionalities. Moreover, this work introduces an in-house developed RIS prototype. The prototype undergoes rigorous empirical evaluation, encompassing multi-hop RIS signal amplification, image reconstruction, and real-world indoor signal coverage experiments. The empirical results robustly affirm the efficacy of RIS in effectively mitigating signal coverage blind spots and enabling radio wave imaging. With RIS-enhanced augmentation, the average indoor signal gain surpasses 8 dB.

eess.SY↗

arXiv2023

Multi-RIS-aided Wireless Communications in Real-world: Prototyping and Field Trials

The performance of multiple reconfigurable intelligent surfaces (RISs) receives limited attention in previous studies. This article fills this research gap by investigating the capabilities of multiple RISs in real-world networks. We propose a simplified yet highly scalable sandwich architecture for implementing one-bit unit cells, with the flexibility to accommodate multi-bit unit cells. To effectively control multiple RISs, we present a cost-effective remote-controlling scheme and develop a cloud-based RIS management system. Through a series of four field trials, we demonstrate the effectiveness of multi-hop routing schemes in establishing reliable links. Our experiments reveal significant improvements in signal strength and data transmission in multi-RIS-aided Wi-Fi and commercial 5G networks. Furthermore, we investigate the power scaling law of RIS-aided beamforming and provide insights into the roles of the later nodes in multi-hop relay chains.

eess.SY↗

arXiv2022

Transforming RIS-Assisted Passive Beamforming from Tedious to Simple: A Relaxation Algorithm for Rician Channel

This paper investigates the problem of maximizing the signal-to-noise ratio (SNR) in reconfigurable intelligent surface (RIS)-assisted MISO communication systems. The problem will be reformulated as a complex quadratic form problem with unit circle constraints. We proved that the SNR maximizing problem has a closed-form global optimal solution when it is a rank-one problem, whereas the former researchers regarded it as an optimization problem. Moreover, We propose a relaxation algorithm (RA) that relaxes the constraints to that of Rayleigh's quotient problem and then projects the solution back, where the SNR obtained by RA achieves much the same SNR as the upper bound but with significantly low time consumption. Then we asymptotically analyze its performance when the transmitter antennas n_t and the number of units of RIS N grow large together, with N/n_t -> c. Finally, our numerical simulations show that RA achieves over 98% of the performance of the upper bound and takes below 1% time consumption of manifold optimization (MO) and 0.1% of semidefinite relaxation (SDR).

eess.SP↗

arXiv2022

Joint Beamforming Design and 3D DoA Estimation for RIS-aided Communication System

In this paper, we consider a reconfigurable intelligent surface (RIS)-assisted 3D direction-of-arrival (DoA) estimation system, in which a uniform planar array (UPA) RIS is deployed to provide virtual line-of-sight (LOS) links and reflect the uplink pilot signal to sensors. To overcome the mutually coupled problem between the beamforming design at the RIS and DoA estimation, we explore the separable sparse representation structure and propose an alternating optimization algorithm. The grid-based DoA estimation is modeled as a joint-sparse recovery problem considering the grid bias, and the Joint-2D-OMP method is used to estimate both on-grid and off-grid parts. The corresponding Cramér-Rao lower bound (CRLB) is derived to evaluate the estimation. Then, the beampattern at the RIS is optimized to maximize the signal-to-noise (SNR) at sensors according to the estimated angles. Numerical results show that the proposed alternating optimization algorithm can achieve lower estimation error compared to benchmarks of random beamforming design.

eess.SP↗

arXiv2022

Towards Analytical Electromagnetic Models for Reconfigurable Intelligent Surfaces

Physically accurate and mathematically tractable models are presented to characterize scattering and reflection properties of reconfigurable intelligent surfaces (RISs). We take continuous and discrete strategies to model a single patch and patch array and their interactions with multiple incident electromagnetic (EM) waves. The proposed models consider the effect of the incident and scattered angles, polarization features, and the topology and geometry of RISs. Particularly, a simple system of linear equations can describe the multiple-input multiple-output (MIMO) behaviors of RISs under reasonable assumptions. It can serve as a fundamental model for analyzing and optimizing the performance of RIS-aided systems in the far-field regime. The proposed models are employed to identify the advantages and limitations of three typical configurations. One important finding is that complicated beam reshaping functionality can not be endowed by popular phase compensation configurations. A possible solution is the simultaneous configurations of collecting area and phase shifting. Numerical simulations verify the effectiveness of the proposed configuration schemes.

eess.SY↗

arXiv2021

A Robust and Reliable Point Cloud Recognition Network Under Rigid Transformation

Point cloud recognition is an essential task in industrial robotics and autonomous driving. Recently, several point cloud processing models have achieved state-of-the-art performances. However, these methods lack rotation robustness, and their performances degrade severely under random rotations, failing to extend to real-world scenarios with varying orientations. To this end, we propose a method named Self Contour-based Transformation (SCT), which can be flexibly integrated into various existing point cloud recognition models against arbitrary rotations. SCT provides efficient rotation and translation invariance by introducing Contour-Aware Transformation (CAT), which linearly transforms Cartesian coordinates of points to translation and rotation-invariant representations. We prove that CAT is a rotation and translation-invariant transformation based on the theoretical analysis. Furthermore, the Frame Alignment module is proposed to enhance discriminative feature extraction by capturing contours and transforming self contour-based frames into intra-class frames. Extensive experimental results show that SCT outperforms the state-of-the-art approaches under arbitrary rotations in effectiveness and efficiency on synthetic and real-world benchmarks. Furthermore, the robustness and generality evaluations indicate that SCT is robust and is applicable to various point cloud processing models, which highlights the superiority of SCT in industrial applications.

cs.CV↗

arXiv2020

LEMO: Learn to Equalize for MIMO-OFDM Systems with Low-Resolution ADCs

This paper develops a new deep neural network optimized equalization framework for massive multiple input multiple output orthogonal frequency division multiplexing (MIMOOFDM) systems that employ low-resolution analog-to-digital converters (ADCs) at the base station (BS). The use of lowresolution ADCs could largely reduce hardware complexity and circuit power consumption, however, it makes the channel station information almost blind to the BS, hence causing difficulty in solving the equalization problem. In this paper, we consider a supervised learning architecture, where the goal is to learn a representative function that can predict the targets (constellation points) from the inputs (outputs of the low-resolution ADCs) based on the labeled training data (pilot signals). Especially, our main contributions are two-fold: 1) First, we design a new activation function, whose outputs are close to the constellation points when the parameters are finally optimized, to help us fully exploit the stochastic gradient descent method for the discrete optimization problem. 2) Second, an unsupervised loss is designed and then added to the optimization objective, aiming to enhance the representation ability (so-called generalization). Lastly, various experimental results confirm the superiority of the proposed equalizer over some existing ones, particularly when the statistics of the channel state information are unclear.

eess.SP↗

arXiv2019

Asymptotics of empirical eigenvalues for large separable covariance matrices

We investigate the asymptotics of eigenvalues of sample covariance matrices associated with a class of non-independent Gaussian processes (separable and temporally stationary) under the Kolmogorov asymptotic regime. The limiting spectral distribution (LSD) is shown to depend explicitly on the Kolmogorov constant (a fixed limiting ratio of the sample size to the dimensionality) and parameters representing the spatio- and temporal- correlations. The Cauchy, M- and N-transforms from free harmonic analysis play key roles to this LSD calculation problem. The free multiplication law of free random variables is employed to give a semi-closed-form expression (only the final step is numerical based) of the LSD for the spatio-covariance matrix being a diagonally dominant Wigner matrix and temporal-covariance matrix an exponential off-diagonal decay (Toeplitz) matrix. Furthermore, we also derive a nonlinear shrinkage estimator for the top eigenvalues associated with a low rank matrix (Hermitian) from its noisy measurements. Numerical studies about the effectiveness of the estimator are also presented.

math.PR↗

arXiv2019

Robust Precoding Design for Coarsely Quantized MU-MIMO Under Channel Uncertainties

Recently, multi-user multiple input multiple output (MU-MIMO) systems with low-resolution digital-to-analog converters (DACs) has received considerable attention, owing to the capability of dramatically reducing the hardware cost. Besides, it has been shown that the use of low-resolution DACs enable great reduction in power consumption while maintain the performance loss within acceptable margin, under the assumption of perfect knowledge of channel state information (CSI). In this paper, we investigate the precoding problem for the coarsely quantized MU-MIMO system without such an assumption. The channel uncertainties are modeled to be a random matrix with finite second-order statistics. By leveraging a favorable relation between the multi-bit DACs outputs and the single-bit ones, we first reformulate the original complex precoding problem into a nonconvex binary optimization problem. Then, using the S-procedure lemma, the nonconvex problem is recast into a tractable formulation with convex constraints and finally solved by the semidefinite relaxation (SDR) method. Compared with existing representative methods, the proposed precoder is robust to various channel uncertainties and is able to support a MUMIMO system with higher-order modulations, e.g., 16QAM.

eess.SP↗

arXiv2017

A Data-driven Approach to Multi-event Analytics in Large-scale Power Systems Using Factor Model

Multi-event detection and recognition in real time is of challenge for a modern grid as its feature is usually non-identifiable. Based on factor model, this paper porposes a data-driven method as an alternative solution under the framework of random matrix theory. This method maps the raw data into a high-dimensional space with two parts: 1) the principal components (factors, mapping event signals); and 2) time series residuals (bulk, mapping white/non-Gaussian noises). The spatial information is extracted form factors, and the termporal infromation from residuals. Taking both spatial-tempral correlation into account, this method is able to reveal the multi-event: its components and their respective details, e.g., occurring time. Case studies based on the standard IEEE 118-bus system validate the proposed method.

stat.AP↗

arXiv2015

A Random Matrix Theoretical Approach to Early Event Detection in Smart Grid

Power systems are developing very fast nowadays, both in size and in complexity; this situation is a challenge for Early Event Detection (EED). This paper proposes a data- driven unsupervised learning method to handle this challenge. Specifically, the random matrix theories (RMTs) are introduced as the statistical foundations for random matrix models (RMMs); based on the RMMs, linear eigenvalue statistics (LESs) are defined via the test functions as the system indicators. By comparing the values of the LES between the experimental and the theoretical ones, the anomaly detection is conducted. Furthermore, we develop 3D power-map to visualize the LES; it provides a robust auxiliary decision-making mechanism to the operators. In this sense, the proposed method conducts EED with a pure statistical procedure, requiring no knowledge of system topologies, unit operation/control models, etc. The LES, as a key ingredient during this procedure, is a high dimensional indictor derived directly from raw data. As an unsupervised learning indicator, the LES is much more sensitive than the low dimensional indictors obtained from supervised learning. With the statistical procedure, the proposed method is universal and fast; moreover, it is robust against traditional EED challenges (such as error accumulations, spurious correlations, and even bad data in core area). Case studies, with both simulated data and real ones, validate the proposed method. To manage large-scale distributed systems, data fusion is mentioned as another data processing ingredient.

stat.ME↗

arXiv2015

Massive MIMO as a Big Data System: Random Matrix Models and Testbed

The paper has two parts. The first one deals with how to use large random matrices as building blocks to model the massive data arising from the massive (or large-scale) MIMO system. As a result, we apply this model for distributed spectrum sensing and network monitoring. The part boils down to the streaming, distributed massive data, for which a new algorithm is obtained and its performance is derived using the central limit theorem that is recently obtained in the literature. The second part deals with the large-scale testbed using software-defined radios (particularly USRP) that takes us more than four years to develop this 70-node network testbed. To demonstrate the power of the software defined radio, we reconfigure our testbed quickly into a testbed for massive MIMO. The massive data of this testbed is of central interest in this paper. It is for the first time for us to model the experimental data arising from this testbed. To our best knowledge, we are not aware of other similar work.

cs.IT↗