arXiv subjects
Publications and source records attributed to Robert I. Killey.
The relationship between topology and network throughput of arbitrarily-connected mesh networks is studied. Taking into account nonlinear channel properties, it is shown that throughput decreases logarithmically with physical network size with minor dependence on network ellipticity.
Fiber nonlinearities, that lead to nonlinear signal interference (NLI), are typically regarded as an instantaneous material response with respect to the optical field. However, in addition to an instantaneous part, the nonlinear fiber response consists of a delayed contribution, referred to as the Raman response. The imaginary part of its Fourier transform, referred to as the Raman gain spectrum, leads to inter-channel stimulated Raman scattering (ISRS). ISRS is a nonlinear effect that redistributes optical power from high to lower frequencies during propagation. However, as the nonlinear fiber response is causal, the Raman spectrum obeys the Kramers-Kronig relations resulting in the real part of the complex valued Raman spectrum. While the impact of the imaginary part (i.e. ISRS) is well studied, the direct implications of its associated real part on the NLI are unexplored. In this work, a theory is proposed to analytically quantify the impact of the real Raman spectrum on the nonlinear interference power. Starting from a generalized Manakov equation, an extension of the ISRS Gaussian Noise (GN) model is derived to include the real Raman spectrum and, thus, to account for the complete nonlinear Raman response. Accurate integral expressions are derived and approximations in closed-form are proposed. Different formulations for the case of single -and dual polarized signals are derived and novel analytical approximations of the real Raman spectrum are proposed. Moreover, it is analytically shown that the real Raman spectrum scales the strength of the instantaneous nonlinear distortions depending on the frequency separation of the interacting frequencies. A simple functional form is derived to assess the scaling of the NLI strength. The proposed theory is validated by numerical simulations over C-and C+L band, using experimentally measured fiber data.
The throughput gains of extending the optical transmission bandwidth to the S+C+L-band are quantified using a Gaussian Noise model that accounts for inter-channel stimulated Raman scattering (ISRS). The impact of potential ISRS mitigation strategies, such as dynamic gain equalization and power optimization, are investigated.
A closed-form formula for the nonlinear interference estimation of arbitrary modulation formats in ultra-wideband transmission systems is presented. Enabled by the proposed approach, the formula is applied to the entire S+C+L band (20 THz) and validated by numerical simulations with experimentally measured fibre data.
We present the first experimental demonstration of learned time-domain digital back-propagation (DBP), in 64-GBd dual-polarization 64-QAM signal transmission over 1014 km. Performance gains were comparable to those obtained with conventional, higher complexity, frequency-domain DBP.
A closed-form formula is derived, which corrects for the modulation format dependence of the Gaussian Noise (GN) model in the presence of inter-channel stimulated Raman scattering (ISRS). The analytical result enables a rapid estimate of the nonlinear interference (NLI) for arbitrary modulation formats and avoids the need for complex integral evaluations and split-step simulations. It is shown that the modulation format dependent NLI can be approximated by two contributions, one originating from a single span and one asymptotic contribution for a large number of spans. The asymptotic contribution is solved in closed-form for an arbitrary link function, making the result applicable for generic fiber systems using lumped, distributed or hybrid amplification schemes. The methodology is applied to the ISRS GN model and a modulation format correction formula in closed-form is derived which accounts for an arbitrary number of spans, inter-channel stimulated Raman scattering, arbitrary launch power distributions and wavelength dependent dispersion and attenuation. The proposed formula is validated by numerical simulations over the entire C+L band for multiple fiber types.
The effect of Kerr-induced optical fiber nonlinearities in C-band (5 THz) EDFA and C+L-band (12.5 THz) Raman-amplified optical communication systems has been studied considering the impact of third-order fiber dispersion. The performance of digital nonlinearity compensation with single channel and 250-GHz bandwidth in both EDFA and Raman amplified systems has been investigated, respectively. The achievable information rates (AIRs) and optimum code rates in each individual transmission channel have been evaluated for the DP-64QAM, the DP-256QAM and the DP-1024QAM modulation formats, both with and without the use of the probabilistic shaping technique. It is found that, for all considered modulation formats, the signal-to-noise ratios, AIRs and code rates exhibit significantly asymmetric behavior about the central channel due to the presence of the third-order dispersion. This provides a new insight that the forward error correction schemes have to be optimized asymmetrically, on a per-channel basis, to maximize the overall throughput.
The recent advances in modelling nonlinear interference of systems operating beyond the C-band are discussed. Estimation accuracy as well as computational complexity of current approaches are compared and addressed.
An accurate, closed-form expression evaluating the nonlinear interference (NLI) power in coherent optical transmission systems in the presence of inter-channel stimulated Raman scattering (ISRS) is derived. The analytical result enables a rapid estimate of the signal-to-noise ratio (SNR) and avoids the need for integral evaluations and split-step simulations. The formula also provides new insight into the underlying parameter dependence of ISRS on the NLI. The proposed result is applicable for dispersion unmanaged, ultra-wideband transmission systems that use optical bandwidths of up to 15 THz. The accuracy of the closed-form expression is compared to numerical integration of the ISRS Gaussian Noise model and split-step simulations in a point-to-point transmission, as well as in a mesh optical network scenario.
An analytical model to estimate nonlinear performance in ultra-wideband optical transmission networks is presented. The model accurately accounts for inter-channel stimulated Raman scattering, variably loaded fibre spans and is validated through C+L band simulations for uniform and probabilistically shaped 64-QAM.
Nonlinearity mitigation using digital signal processing has been shown to increase the achievable data rates of optical fiber transmission links. One especially effective technique is digital back propagation (DBP), an algorithm capable of simultaneously compensating for linear and nonlinear channel distortions. The most significant barrier to implementing this technique, however, is its high computational complexity. In recent years, there have been several proposed alternatives to DBP with reduced computational complexity, although such techniques have not demonstrated performance benefits commensurate with the complexity of implementation. In order to fully characterize the computational requirements of DBP, there is a need to model the algorithm behavior when constrained to the logic used in a digital coherent receiver. Such a model allows for the analysis of any signal recovery algorithm in terms of true hardware complexity which, crucially, includes the bit-depth of the multiplication operation. With a limited bit depth, there is quantization noise, introduced with each arithmetic operation, and it can no longer be assumed that the conventional DBP algorithm will outperform its low complexity alternatives. In this work, DBP and a single nonlinear step DBP implementation, the \textit{Enhanced Split Step Fourier} method (ESSFM), were compared with linear equalization using a generic software model of fixed point hardware. The requirements of bit depth and fast Fourier transform (FFT) size are discussed to examine the optimal operating regimes for these two schemes of digital nonlinearity compensation. For a 1000 km transmission system, it was found that (assuming an optimized FFT size), in terms of SNR, the ESSFM algorithm outperformed the conventional DBP for all hardware resolutions up to 13 bits.
Hybrid distributed Raman-EDFA amplifiers, with a continuous 91 nm gain bandwidth, are used to enable a record single mode fibre transmission capacity of 120.0 Tbit/s using 312x35 GBd DP-256QAM over 9x70 km spans.
It is predicted that demand in optical access networks will reach multi-Gb/s per user. However, the limited performance of the direct detection receiver technology currently used in the optical network units at the customers' premises restricts data rates/user. Therefore, the concept of coherent-enabled access networks has attracted attention in recent years, as this technology offers high receiver sensitivity, inherent frequency selectivity, and linear field detection enabling the full compensation of linear channel impairments. However, the complexity of conventional (dual-polarisation digital) coherent receivers has so far prevented their introduction into access networks. Thus, to exploit the benefits of coherent technology in the ONUs, low complexity coherent receivers, suitable for implementation in ONUs, are needed. In this paper, the recently proposed low complexity coherent (i.e., polarisation-independent Alamouti-coding heterodyne) receiver is, for the first time, compared in terms of its minimum receiver sensitivity with five previously reported receiver designs, including a detailed discussion on their advantages and limitations. It is shown that the Alamouti-coding based receiver approach allows the lowest number of photons per bit (PPB) transmitted (with a lower bound of 15.5 PPB in an ideal system simulations) whilst requiring the lowest optical receiver hardware complexity. It also exhibits comparable complexity to the currently deployed direct-detection receivers, which typically require >1000 PPB. Finally, a comparison of experimentally achieved receiver sensitivities and transmission distances using these receivers is presented. The highest spectral efficiency and longest transmission distance at the highest bit rate reported using the Alamouti-coding receiver, which is also the only one, to date, to have been demonstrated in a full system bidirectional transmission.
Meeting the ever-growing information rate demands has become of utmost importance for optical communication systems. However, it has proven to be a challenging task due to the presence of Kerr effects, which have largely been regarded as a major bottleneck for enhancing the achievable information rates in modern optical communications. In this work, the optimisation and performance of digital nonlinearity compensation are discussed for maximising the achievable information rates in spectrally-efficient optical fibre communication systems. It is found that, for any given target information rate, there exists a trade-off between modulation format and compensated bandwidth to reduce the computational complexity requirement of digital nonlinearity compensation.
The efficiency of digital nonlinearity compensation (NLC) is analyzed in the presence of noise arising from amplified spontaneous emission noise (ASE) as well as from a non-ideal transceiver subsystem. Its impact on signal-to-noise ratio (SNR) and reach increase is studied with particular emphasis on split NLC, where the digital back-propagation algorithm is divided between transmitter and receiver. An analytical model is presented to compute the SNR's for non-ideal transmission systems with arbitrary split NLC configurations. When signal-signal nonlinearities are compensated, the performance limitation arises from residual signal-noise interactions. These interactions consist of nonlinear beating between the signal and co-propagating ASE and transceiver noise. While transceiver noise-signal beating is usually dominant for short transmission distances, ASE noise-signal beating is dominant for larger transmission distances. It is shown that both regimes behave differently with respect to the optimal NLC split ratio and their respective reach gains. Additionally, simple formulas for the prediction of the optimal NLC split ratio and the reach increase in those two regimes are reported. It is found that split NLC offers negligible gain with respect to conventional digital back-propagation (DBP) for distances less than 1000 km using standard single-mode fibers and a transceiver (back-to-back) SNR of 26 dB, when transmitter and receiver inject the same amount of noise. However, when transmitter and receiver inject an unequal amount of noise, reach gains of 56% on top of DBP are achievable by properly tailoring the split NLC algorithm. The theoretical findings are confirmed by numerical simulations.
Achievable information rates (AIRs) of wideband optical communication systems using ~40 nm (~5 THz) EDFA and ~100 nm (~12.5 THz) distributed Raman amplification are estimated based on a first-order perturbation analysis. The AIRs of each individual channel have been evaluated for DP-64QAM, DP-256QAM, and DP-1024QAM modulation formats. The impact of full-field nonlinear compensation (FF-NLC) and probabilistically shaped constellations using a Maxwell-Boltzmann distribution were studied and compared to electronic dispersion compensation. It is found that a probabilistically shaped DP-1024QAM constellation combined with FF-NLC yields AIRs of ~75 Tbit/s for the EDFA scheme and ~223 Tbit/s for the Raman amplification scheme over 2000 km standard single mode fibre transmission.