SearcharxivSearch

arXiv subjects

Robert Lahmann

Publications and source records attributed to Robert Lahmann.

11 recordsLinked to original sources

TAROGE-M: Radio Antenna Array on Antarctic High Mountain for Detecting Near-Horizontal Ultra-High Energy Air Showers

TAROGE-M is a self-triggered radio antenna array atop the 2700 m high Mt. Melbourne in Antarctica, designed to detect impulsive geomagnetic emission from extensive air showers induced by ultra-high energy (UHE) particles beyond 0.1 EeV, including cosmic rays (CRs), Earth-skimming tau neutrinos, and particularly, the "ANITA anomalous events" (AAEs) from near and below the horizon, which origin remains uncertain and requires more experimental inputs for clarification. The detection concept of TAROGE-M takes advantage of a high altitude with synoptic view toward the horizon as an efficient signal collector, and the radio quietness as well as strong and near vertical geomagnetic field in Antarctica. This approach has a low energy threshold, high duty cycle, and is easy to extend for quickly enlarging statistics. Here we report experimental results from the first TAROGE-M station deployed in 2020, corresponding to $25.3$-days of livetime. The station consists of six receiving antennas operating at 180-450 MHz, and can reconstruct source directions with $\sim0.3^\circ$ angular resolution. To demonstrate its ability to detect UHE air showers, a search for CR signals in the data was conducted, resulting in seven identified events. These events have a mean reconstructed energy of $0.95_{-0.31}^{+0.46}$ EeV and zenith angles between $25^\circ-82^\circ$, with both distributions agreeing with simulations. The estimated CR flux is also consistent with results of other experiments. The TAROGE-M sensitivity to AAEs is approximated by the tau neutrino exposure with simulations, suggesting comparable sensitivity as ANITA's at $~1$ EeV energy with a few station-years of operation. These first results verified the station design and performance in a polar and high-altitude environment, and are promising for further discovery of tau neutrinos and AAEs after an extension in the near future.

astro-ph.HE

NuRadioReco: A reconstruction framework for radio neutrino detectors

While the radio detection of cosmic rays has advanced to a standard method in astroparticle physics, the radio detection of neutrinos is just about to start its full bloom. The successes of pilot-arrays have to be accompanied by the development of modern and flexible software tools to ensure rapid progress in reconstruction algorithms and data processing. We present NuRadioReco as such a modern Python-based data analysis tool. It includes a suitable data-structure, a database-implementation of a time-dependent detector, modern browser-based data visualization tools, and fully separated analysis modules. We describe the framework and examples, as well as new reconstruction algorithms to obtain the full three-dimensional electric field from distributed antennas which is needed for high-precision energy reconstruction of particle showers.

astro-ph.IM

Acoustic detection of high energy neutrinos in sea water: status and prospects

The acoustic neutrino detection technique is a promising approach for future large-scale detectors with the aim of measuring the small expected flux of neutrinos at energies in the EeV-range and above. The technique is based on the thermo-acoustic model, which implies that the energy deposition by a particle cascade - resulting from a neutrino interaction in a medium with suitable thermal and acoustic properties - leads to a local heating and a subsequent characteristic pressure pulse that propagates in the surrounding medium. Current or recent test setups for acoustic neutrino detection have either been add-ons to optical neutrino telescopes or have been using acoustic arrays built for other purposes, typically for military use. While these arrays have been too small to derive competitive limits on neutrino fluxes, they allowed for detailed studies of the experimental technique. With the advent of the research infrastructure KM3NeT in the Mediterranean Sea, new possibilities will arise for acoustic neutrino detection. In this article, results from the "first generation" of acoustic arrays will be summarized and implications for the future of acoustic neutrino detection will be discussed.

astro-ph.IM

Hydrophone characterization for the KM3NeT experiment

With the KM3NeT experiment, which is presently under construction in the Mediterranean Sea, a new neutrino telescope will be installed to study both the neutrino properties as well as the cosmic origin of these particles. To do so, about 6000 optical modules will be installed in the abyss of the Mediterranean Sea to observe the Cherenkov radiation induced by high energy particle interactions in the deep sea. As each module of the KM3NeT telescope includes a piezo hydrophone, KM3NeT will also provide a unique matrix of underwater hydrophones. Results from the measurements show a well understood response of continuous signals, such as tones. In contrast, the response to transients signals exhibit a complex behavior with ringing and echo's. Amplitude calibration measurements show a frequency dependent response which can be corrected for. Finally a system noise floor has been determined which amounts to 45 dB Re $μ$Pa$^2$/Hz at 30 kHz.

astro-ph.IM

Neutrino Detection, Position Calibration and Marine Science with Acoustic Arrays in the Deep Sea

Arrays of acoustic receivers are an integral part of present and potential future Cherenkov neutrino telescopes in the deep sea. They measure the positions of individual detector elements which vary with time as an effect of undersea currents. At the same time, the acoustic receivers can be employed for marine science purposes, in particular for monitoring the ambient noise environment and the signals emitted by the fauna of the sea. And last but not least, they can be used for studies towards acoustic detection of ultra-high-energy neutrinos. Measuring acoustic pressure pulses in huge underwater acoustic arrays with an instrumented volume of the order of 100 km^3 is a promising approach for the detection of cosmic neutrinos with energies exceeding 1 EeV. Pressure signals are produced by the particle cascades that evolve when neutrinos interact with nuclei in water, and can be detected over large distances in the kilometre range. In this article, the status of acoustic detection will be reviewed and plans for the future - most notably in the context of KM3NeT - will be discussed. The connection between neutrino detection, position calibration and marine science will be illustrated.

astro-ph.IM

Status and Recent Results of the Acoustic Neutrino Detection Test System AMADEUS

The AMADEUS system is an integral part of the ANTARES neutrino telescope in the Mediterranean Sea. The project aims at the investigation of techniques for acoustic neutrino detection in the deep sea. Installed at a depth of more than 2000m, the acoustic sensors of AMADEUS are based on piezo-ceramics elements for the broad-band recording of signals with frequencies ranging up to 125kHz. AMADEUS was completed in May 2008 and comprises six "acoustic clusters", each one holding six acoustic sensors that are arranged at distances of roughly 1m from each other. The clusters are installed with inter-spacings ranging from 15m to 340m. Acoustic data are continuously acquired and processed at a computer cluster where online filter algorithms are applied to select a high-purity sample of neutrino-like signals. 1.6 TB of data were recorded in 2008 and 3.2 TB in 2009. In order to assess the background of neutrino-like signals in the deep sea, the characteristics of ambient noise and transient signals have been investigated. In this article, the AMADEUS system will be described and recent results will be presented.

astro-ph.IM

Deep-Sea Acoustic Neutrino Detection and the AMADEUS System as a Multi-Purpose Acoustic Array

The use of conventional neutrino telescope methods and technology for detecting neutrinos with energies above 1 EeV from astrophysical sources would be prohibitively expensive and may turn out to be technically not feasible. Acoustic detection is a promising alternative for future deep-sea neutrino telescopes operating in this energy regime. It utilises the effect that the energy deposit of the particle cascade evolving from a neutrino interaction in water generates a coherently emitted sound wave with frequency components in the range between about 1 and 50 kHz. The AMADEUS (Antares Modules for Acoustic DEtection Under the Sea) project is integrated into the ANTARES neutrino telescope and aims at the investigation of techniques for acoustic particle detection in sea water. The acoustic sensors of AMADEUS are using piezo elements and are recording a broad-band signal with frequencies ranging up to 125 kHz. After an introduction to acoustic neutrino detection it will be shown how an acoustic array similar to AMADEUS can be used for positioning as well as acoustic particle detection. Experience from AMADEUS and possibilities for a future large scale neutrino telescope in the Mediterranean Sea will be discussed.

astro-ph.IM

Status and First Results of the Acoustic Detection Test System AMADEUS

The AMADEUS system is integrated in the ANTARES neutrino telescope in the Mediterranean Sea and aims for the investigation of acoustic particle detection techniques in the deep sea. Installed at a depth of more than 2000m, the acoustic sensors of AMADEUS are using piezo-ceramic elements for the broad-band recording of acoustic signals with frequencies ranging up to 125kHz. AMADEUS consists of six clusters, each one comprising six acoustic sensors that are arranged at distances of roughly 1m from each other. Three acoustic clusters are installed along a vertical mechanical structure (a so-called Line) of ANTARES with spacings of about 15m and 110m, respectively. The remaining 3 clusters are installed with vertical spacings of 15m on a further Line of the ANTARES detector. The horizontal distance between the two lines is 240m. Each acoustic cluster allows for the suppression of random noise by requiring local coincidences and the reconstruction of the arrival direction of acoustic waves. Source positions can then be reconstructed using the precise time correlations between the clusters provided by the ANTARES clock system. AMADEUS thus allows for extensive acoustic background studies including signal correlations on several length scales as well as source localisation. The system is therefore excellently suited for feasibility studies for a potential future large scale acoustic neutrino telescope in sea water. Since the start of data taking on December 5th, 2007 a wealth of data has been recorded. The AMADEUS system will be described and some first results will be presented.

astro-ph.IM

Development of Acoustic Sensors for the ANTARES Experiment

In order to study the possibility of acoustic detection of ultra-high energy neutrinos in water, our group is planning to deploy and operate an array of acoustic sensors using the ANTARES Neutrino telescope in the Mediterranean Sea. Therefore, acoustic sensor hardware has to be developed which is both capable of operation under the hostile conditions of the deep sea and at the same time provides the high sensitivity necessary to detect the weak pressure signals resulting from the neutrino's interaction in water. In this paper, two different approaches to building such sensors, as well as performance studies in the laboratory and in situ, are presented.

astro-ph

Development of acoustic devices for ultra-high energy neutrino detectors

Acoustic neutrino detection is a promising approach to instrument the large detector volumes needed for the detection of the small neutrino fluxes expected at ultra-high energies (E > 1 EeV). We report on several studies investigating the feasibility of such an acoustic detector. High-precision lab measurements using laser and proton beams aiming at the verification of the thermo-acoustic model have been performed. Different types of acoustic sensors have been developed and characterized. An autonomous acoustic system, attached to the ANTARES prototype string "Line0", has been deployed and operated successfully at 2400 m depth, allowing for in-situ studies of the acoustic background in the Mediterranean Sea.

astro-ph

Design considerations and sensitivity estimates for an acoustic neutrino detector

We present a Monte Carlo study of an underwater neutrino telescope based on the detection of acoustic signals generated by neutrino induced cascades. This provides a promising approach to instrument large detector volumes needed to detect the small flux of cosmic neutrinos at ultra-high energies (E > 1 EeV). Acoustic signals are calculated based on the thermo-acoustic model. The signal is propagated to the sensors taking frequency dependent attenuation into account, and detected using a threshold trigger, where acoustic background is included as an effective detection threshold. A simple reconstruction algorithm allows for the determination of the cascade direction and energy. Various detector setups are compared regarding their effective volumes. Sensitivity estimates for the diffuse neutrino flux are presented.

astro-ph