arXiv subjects

Robert M. Reeve

Publications and source records attributed to Robert M. Reeve.

12 recordsLinked to original sources

arXiv2021

Direct imaging of chiral domain walls and Néel-type skyrmionium in ferrimagnetic alloys

The evolution of chiral spin structures is studied in ferrimagnet Ta/Ir/Fe/GdFeCo/Pt multilayers as a function of temperature using scanning electron microscopy with polarization analysis (SEMPA). The GdFeCo ferrimagnet exhibits pure right-hand Néel-type domain wall (DW) spin textures over a large temperature range. This indicates the presence of a negative Dzyaloshinskii-Moriya interaction (DMI) that can originate from both the top Fe/Pt and the Co/Pt interfaces. From measurements of the DW width, as well as complementary magnetic characterization, the exchange stiffness as a function of temperature is ascertained. The exchange stiffness is surprisingly mostly constant, which is explained by theoretical predictions. Beyond single skyrmions, we find by direct imaging a pure Néel-type skyrmionium, which due to the absence of a skyrmion Hall angle is a promising topological spin structure to enable high impact potential applications in the next generation of spintronic devices.

cond-mat.mtrl-sci↗

arXiv2021

Commensurability between element symmetry and the number of skyrmions governing skyrmion diffusion in confined geometries

Magnetic skyrmions are topological magnetic structures, which exhibit quasi-particle properties and can show enhanced stability against perturbation from thermal noise. Recently, thermal Brownian diffusion of these quasi-particles has been found in continuous films and applications in unconventional computing have received significant attention, which however require structured elements. Thus, as the next necessary step, we here study skyrmion diffusion in confined geometries and find it to be qualitatively different: The diffusion is governed by the interplay between the total number of skyrmions and the structure geometry. In particular, we ascertain the effect of circular and triangular geometrical confinement and find that for triangular geometries the behavior is drastically different for the cases when the number of skyrmions in the element is either commensurate or incommensurate with a symmetric filling of the element. This influence of commensurability is corroborated by simulations of a quasi-particle model.

cond-mat.mtrl-sci↗

arXiv2020

Quantification of competing magnetic states and switching pathways in curved nanowires by direct dynamic imaging

For viable applications, spintronic devices based e.g. on domain wall motion need to be highly reliable with stable magnetization states and highly reproducible switching pathways transforming one state to another. The existence of multiple stable states and switching pathways in a system is a definitive barrier for device operation, yet rare and stochastic events are difficult to detect and understand. We demonstrate an approach to quantify competing magnetic states and stochastic switching pathways based on time-resolved scanning electron microscopy with polarization analysis, applied to the technologically relevant control of vortex domain wall chirality via field and curvature in curved wires. While being a pump-probe technique, our analysis scheme nonetheless allows for the disentanglement of different occurring dynamic pathways and we can even identify the rare events leading to changes from one magnetization switching pathway to another pathway via temperature- and geometry-dependent measurements. The experimental imaging is supported by micromagnetic simulations to reveal the mechanisms responsible for the change of the pathway. Together the results allow us to explain the origin and details of the domain wall chirality control and to quantify the frequency and the associated energy barriers of thermally activated changes of the states and switching pathways.

cond-mat.mes-hall↗

arXiv2019

Revealing the importance of interfaces for pure spin current transport

Spin transport phenomena underpin an extensive range of spintronic effects. In particular spin transport across interfaces occurs in most device concepts, but is so far poorly understood. As interface properties strongly impact spin transport, one needs to characterize and correlate them to the fabrication method. Here we investigate pure spin current transport across interfaces and connect this with imaging of the interfaces. We study the detection of pure spin currents via the inverse spin Hall effect in Pt and the related spin current absorption by Pt in Py-Cu-Pt lateral spin valves. Depending on the fabrication process, we either find a large (inverse) spin Hall effect signal and low spin absorption by Pt or vice versa. We explain these counter-intuitive results by the fabrication induced varying quality of the Cu/Pt interfaces, which is directly revealed via a special scanning electron microscopy technique for interface imaging and correlated to the spin transport.

cond-mat.mtrl-sci↗

arXiv2018

Scaling of intrinsic domain wall magneto-resistance with confinement in electromigrated nanocontacts

In this work we study the evolution of intrinsic domain wall magnetoresistance (DWMR) with domain wall confinement. Clean permalloy notched half-ring nanocontacts are fabricated using a special ultra-high vacuum electromigration procedure to tailor the size of the wire in-situ and through the resulting domain wall confinement we tailor the domain wall width from a few tens of nm down to a few nm. Through measurements of the dependence of the resistance with respect to the applied field direction we extract the contribution of a single domain wall to the MR of the device, as a function of the domain wall width in the confining potential at the notch. In this size range, an intrinsic positive MR is found, which dominates over anisotropic MR, as confirmed by comparison to micromagnetic simulations. Moreover, the MR is found to scale monotonically with the size of the domain wall, $δ_{DW}$, as 1/$δ_{DW}^b$, with $b=2.31\pm 0.39 $. The experimental result is supported by quantum-mechanical transport simulations based on ab-initio density functional theory calculations.

cond-mat.mes-hall↗

arXiv2018

Magnetic Imaging and Microscopy

The magnetic domain configuration of a system reveals a wealth of information about the fundamental magnetic properties of that system and can be a critical factor in the operation of magnetic devices. Not only are the details of the domain structure strongly governed by materials parameters, but in thin-films and mesoscopic elements the geometry has an often pivotal effect, providing a convenient handle to tailor desired domain states. Furthermore a full understanding of a system requires, in addition, investigation of the dynamic evolution of the spin-state, which is of particular importance for applications relying on e.g. the switching of magnetic elements. Here we review some of the main modern techniques for magnetic imaging, highlighting their respective advantages and limitations. The methods for imaging domain configurations and spin structures cover various spatial and temporal resolution scales and encompass those based on electron and x-ray microscopy as well as scanning probe techniques. Furthermore, away from the discipline of condensed-matter physics, magnetic effects are instrumental in a number of techniques for medical imaging, some key examples of which we also present.

cond-mat.mes-hall↗

arXiv2018

Development of a SEMPA system for magnetic imaging with ns time resolution and phase-sensitive detection

Scanning electron microscopy with polarization analysis is a powerful lab-based magnetic imaging technique offering parallel imaging of multiple magnetization components and a very high spatial resolution. However, one drawback of the technique is the long required acquisition time resulting from the low inherent efficiency of spin detection, which has limited the applicability of the technique to certain quasi-static measurement schemes and materials with strong contrast. Here we demonstrate the ability to improve the signal-to-noise ratio for particular classes of measurement involving periodic excitation of the magnetic structure via the integration of a time-to-digital converter to the system and a digital lock-in detection scheme. The modified setup provides dynamic imaging capabilities using selected time windows and finally full time-resolved imaging with a demonstrated time resolution of better than 2 ns.

physics.ins-det↗

arXiv2016

Skyrmion Hall Effect Revealed by Direct Time-Resolved X-Ray Microscopy

Magnetic skyrmions are highly promising candidates for future spintronic applications such as skyrmion racetrack memories and logic devices. They exhibit exotic and complex dynamics governed by topology and are less influenced by defects, such as edge roughness, than conventionally used domain walls. In particular, their finite topological charge leads to a predicted "skyrmion Hall effect", in which current-driven skyrmions acquire a transverse velocity component analogous to charged particles in the conventional Hall effect. Here, we present nanoscale pump-probe imaging that for the first time reveals the real-time dynamics of skyrmions driven by current-induced spin orbit torque (SOT). We find that skyrmions move at a well-defined angle Θ_{SH} that can exceed 30° with respect to the current flow, but in contrast to theoretical expectations, Θ_{SH} increases linearly with velocity up to at least 100 m/s. We explain our observation based on internal mode excitations in combination with a field-like SOT, showing that one must go beyond the usual rigid skyrmion description to unravel the dynamics.

cond-mat.mtrl-sci↗

arXiv2016

Domain Wall Spin Structures in Mesoscopic Fe Rings probed by High Resolution SEMPA

We present a combined theoretical and experimental study of the energetic stability and accessibility of different domain wall spin configurations in mesoscopic magnetic iron rings. The evolution is investigated as a function of the width and thickness in a regime of relevance to devices, while Fe is chosen as a material due to its simple growth in combination with attractive magnetic properties including high saturation magnetization and low intrinsic anisotropy. Micromagnetic simulations are performed to predict the lowest energy states of the domain walls, which can be either the transverse or vortex wall spin structure, in good agreement with analytical models, with simulations revealing the expected low temperature configurations observable on relaxation of the magnetic structure from saturation in an external field. In the latter case, following the domain wall nucleation process, transverse domain walls are found at larger widths and thicknesses than would be expected by comparing the competing energy terms demonstrating the importance of metastability of the states. The simulations are compared to high resolution experimental images of the magnetization using scanning electron microscopy with polarization analysis to provide a phase diagram of the various spin configurations. In addition to the vortex and simple symmetric transverse domain wall, a significant range of geometries are found to exhibit highly asymmetric transverse domain walls with properties distinct from the symmetric transverse wall. Simulations of the asymmetric walls reveal an evolution of the domain wall tilting angle with ring thickness. Analysis of all the data reveals that in addition to the geometry, the influence of materials properties, defects and thermal activation all need to be taken into account in order to understand and reliably control the experimentally accessible states, as needed for devices.

cond-mat.mtrl-sci↗

arXiv2015

Spin Currents injected electrically and thermally from highly spin polarized Co$_2$MnSi

We demonstrate the injection and detection of electrically and thermally generated spin currents probed in Co$_2$MnSi/Cu lateral spin valves. Devices with different electrode separations are patterned to measure the non-local signal as a function of the electrode spacing and we determine a relatively high effective spin polarization $α$ of Co$_2$MnSi to be 0.63 and the spin diffusion length of Cu to be 500 nm at room temperature. The electrically generated non-local signal is measured as a function of temperature and a maximum signal is observed for a temperature of 80 K. The thermally generated non-local signal is measured as a function of current density and temperature in a second harmonic measurement detection scheme. We find different temperature dependences for the electrically and thermally generated non-local signals, which allows us to conclude that the temperature dependence of the signals is not just dominated by the transport in the Cu wire, but that there is a crucial contribution from the different generation mechanisms, which has been largely disregarded to date.

cond-mat.mes-hall↗

arXiv2013

Magnetic Domain Structure of La0.7Sr0.3MnO3 thin-films probed at variable temperature with Scanning Electron Microscopy with Polarization Analysis

The domain configuration of 50 nm thick La0.7SrMnO3 films has been directly investigated using scanning electron microscopy with polarization analysis (SEMPA), with magnetic contrast obtained without the requirement for prior surface preparation. The large scale domain structure reflects a primarily four-fold anisotropy, with a small uniaxial component, consistent with magneto-optic Kerr effect measurements. We also determine the domain transition profile and find it to be in agreement with previous estimates of the domain wall width in this material. The temperature dependence of the image contrast is investigated and compared to superconducting-quantum interference device magnetometry data. A faster decrease in the SEMPA contrast is revealed, which can be explained by the technique's extreme surface sensitivity, allowing us to selectively probe the surface spin polarization which due to the double exchange mechanism exhibits a distinctly different temperature dependence than the bulk magnetization.

cond-mat.mtrl-sci↗

arXiv2012

Domain-wall induced large magnetoresistance effects at zero applied field in ballistic nanocontacts

We determine magnetoresistance effects in stable and clean permalloy nanocontacts of variable cross-section, fabricated by UHV deposition and in-situ electromigration. To ascertain the magnetoresistance (MR) effects originating from a magnetic domain wall, we measure the resistance values with and without such a wall at zero applied field. In the ballistic transport regime, the MR ratio reaches up to 50% and exhibits a previously unobserved sign change. Our results can be reproduced by recent atomistic calculations for different atomic configurations of the nanocontact, highlighting the importance of the detailed atomic arrangement for the MR effect.

cond-mat.mes-hall↗