arXiv subjects

Robert Schofield

Publications and source records attributed to Robert Schofield.

9 recordsLinked to original sources

arXiv2026

Identifying Cost-Favorable Locations for Cosmic Explorer

Cosmic Explorer (CE) is a proposed next-generation gravitational-wave observatory that aims to extend our gravitational-wave vision to the edge of the observable universe. With a foundation of technology proven by the National Science Foundation's Laser Interferometer Gravitational-Wave Observatory (LIGO), CE will observe black holes and neutron stars across cosmic time, explore the nature of extreme matter with high fidelity, and probe the nature of gravity and fundamental physics. CE's reference design consists of two widely separated L-shaped detectors to be located in the conterminous United States, one with 20 km arms and one with 40 km arms. As of 2026, CE is in its design and site evaluation phase, with plans to begin observing in the early 2040s together with the Einstein Telescope in Europe. The size of CE observatories---up to an order of magnitude larger than the 4 km LIGO observatories---presents a significant challenge for identifying suitable candidate sites where CE will achieve its science goals, be built within cost boundaries, attract and retain a workforce, and align with community values. In this paper, we report on the design and use of a Python package, the Cosmic Explorer Location Search (CELS) package, to identify cost-favorable sites for CE. For a specified detector location and L-shaped geometry in the conterminous United States, CELS estimates site-preparation costs associated with excavation, land clearing, and land acquisition, while accounting for the scientific effects of detector tilt, arm length, and arm opening angle. After describing the package's methods, we present results for a national-level cost and positioning analysis that complements a recent national suitability analysis. We also discuss how future improvements to CELS will allow deeper, more local studies as the Cosmic Explorer team narrows its list of potential locations.

physics.ins-det↗

arXiv2026

Rapid data quality investigations of gravitational-wave events with the Data Quality Report Builder toolkit

We present the Data Quality Report Builder toolkit, DQRbuild, a suite of data quality tools that have been developed to vet gravitational-wave events in preparation for the fourth LIGO-Virgo-KAGRA observing run. We explain the main functionality and the many scientific tests that we support. To validate the performance of the tools included in the toolkit, we run a series of tests on all significant candidates shared as public alerts in the third observing run to compare against what was manually reported using human intervention. We find that these automated tools can now identify 96% of the problems identified by humans during this previous observing run, with a 24% false alarm rate. We conclude with a commentary on the prospects and potential challenges for fully automating the process of vetting the data quality for gravitational-wave events identified in future observing runs.

astro-ph.IM↗

arXiv2026

Scattered light noise at LIGO Livingston Observatory during O4

Scattered light is one of the most common sources of noise in the LIGO gravitational wave detectors. Light scattering is a highly non-linear process through which motion at low frequencies gets up-converted and creates noise in a higher frequency band in the detector data. From the beginning of the fourth observation run, many glitches appeared in the data of LIGO Livingston detector in the frequency range 10-40 Hz, and the morphology of these glitches suggested that they were produced by scattered light. From our analysis, we identified two different populations of scattered light glitches, one group having higher SNR than the other. The glitches of the high- SNR group were solely modulated by microseismic ground motion (ground motion in 0.1-1.0 Hz) and in this paper, we present models of possible coupling mechanisms for these glitches. We also present results of a statistical correlation analysis based on our models, which indicates that the microseismic ground motion at the corner station along the X direction is the one most correlated with the noise which create these high SNR glitches. After installing baffles very close to the test mass mirrors, we have noticed a significant reduction in the rate and SNR of these glitches. The low-SNR glitches were primarily modulated by high frequency (10-30 Hz) vertical ground motion at the corner station, and this motion was coupling through a specific vacuum chamber at the corner station. After installing an additional seismic isolation platform in that vacuum chamber, these glitches have disappeared.

astro-ph.IM↗

arXiv2023

Automated Evaluation of Environmental Coupling for Advanced LIGO Gravitational Wave Detections

The extreme sensitivity required for direct observation of gravitational waves by the Advanced LIGO detectors means that environmental noise is increasingly likely to contaminate Advanced LIGO gravitational wave signals if left unaddressed. Consequently, environmental monitoring efforts have been undertaken and novel noise mitigation techniques have been developed which have reduced environmental coupling and made it possible to analyze environmental artifacts with potential to affect the 90 gravitational wave events detected from 2015-2020 by the Advanced LIGO detectors. So far, there is no evidence for environmental contamination in gravitational wave detections. However, automated, rapid ways to monitor and assess the degree of environmental coupling between gravitational wave detectors and their surroundings are needed as the rate of detections continues to increase. We introduce a computational tool, PEMcheck, for quantifying the degree of environmental coupling present in gravitational wave signals using data from the extant collection of environmental monitoring sensors at each detector. We find that PEMcheck's automated analysis identifies only a small number of gravitational waves that merit further study by environmental noise experts due to possible contamination, a substantial improvement over the manual vetting that occurred for every gravitational wave candidate in the first two observing runs. With the validation provided herein; PEMcheck will play a critical role in event validation during LIGO's fourth observing run as an integral part of the data quality report produced for each gravitational wave candidate.

gr-qc↗

arXiv2023

Modeling and Reduction of High Frequency Scatter Noise at LIGO Livingston

The sensitivity of aLIGO detectors is adversely affected by the presence of noise caused by light scattering. Low frequency seismic disturbances can create higher frequency scattering noise adversely impacting the frequency band in which we detect gravitational waves. In this paper, we analyze instances of a type of scattered light noise we call "Fast Scatter" that is produced by motion at frequencies greater than 1 Hz, to locate surfaces in the detector that may be responsible for the noise. We model the phase noise to better understand the relationship between increases in seismic noise near the site and the resulting Fast Scatter observed. We find that mechanical damping of the Arm Cavity Baffles (ACBs) led to a significant reduction of this noise in recent data. For a similar degree of seismic motion in the 1-3 Hz range, the rate of noise transients is reduced by a factor of ~ 50.

astro-ph.IM↗

arXiv2023

Cosmic Explorer: A Submission to the NSF MPSAC ngGW Subcommittee

Gravitational-wave astronomy has revolutionized humanity's view of the universe, a revolution driven by observations that no other field can make. This white paper describes an observatory that builds on decades of investment by the National Science Foundation and that will drive discovery for decades to come: Cosmic Explorer. Major discoveries in astronomy are driven by three related improvements: better sensitivity, higher precision, and opening new observational windows. Cosmic Explorer promises all three and will deliver an order-of-magnitude greater sensitivity than LIGO. Cosmic Explorer will push the gravitational-wave frontier to almost the edge of the observable universe using technologies that have been proven by LIGO during its development. With the unprecedented sensitivity that only a new facility can deliver, Cosmic Explorer will make discoveries that cannot yet be anticipated, especially since gravitational waves are both synergistic with electromagnetic observations and can reach into regions of the universe that electromagnetic observations cannot explore. With Cosmic Explorer, scientists can use the universe as a laboratory to test the laws of physics and study the nature of matter. Cosmic Explorer allows the United States to continue its leading role in gravitational-wave science and the international network of next-generation observatories. With its extraordinary discovery potential, Cosmic Explorer will deliver revolutionary observations across astronomy, physics, and cosmology including: Black Holes and Neutron Stars Throughout Cosmic Time, Multi-Messenger Astrophysics and Dynamics of Dense Matter, New Probes of Extreme Astrophysics, Fundamental Physics and Precision Cosmology, Dark Matter and the Early Universe.

astro-ph.IM↗

arXiv2019

Blip glitches in Advanced LIGO data

Blip glitches are short noise transients present in data from ground-based gravitational-wave observatories. These glitches resemble the gravitational-wave signature of massive binary black hole mergers. Hence, the sensitivity of transient gravitational-wave searches to such high-mass systems and other potential short duration sources is degraded by the presence of blip glitches. The origin and rate of occurrence of this type of glitch have been largely unknown. In this paper we explore the population of blip glitches in Advanced LIGO during its first and second observing runs. On average, we find that Advanced LIGO data contains approximately two blip glitches per hour of data. We identify four subsets of blip glitches correlated with detector auxiliary or environmental sensor channels, however the physical causes of the majority of blips remain unclear.

physics.ins-det↗

arXiv2018

Measurement and subtraction of Schumann resonances at gravitational-wave interferometers

Correlated magnetic noise from Schumann resonances threatens to contaminate the observation of a stochastic gravitational-wave background in interferometric detectors. In previous work, we reported on the first effort to eliminate global correlated noise from the Schumann resonances using Wiener filtering, demonstrating as much as a factor of two reduction in the coherence between magnetometers on different continents. In this work, we present results from dedicated magnetometer measurements at the Virgo and KAGRA sites, which are the first results for subtraction using data from gravitational-wave detector sites. We compare these measurements to a growing network of permanent magnetometer stations, including at the LIGO sites. We show how dedicated measurements can reduce coherence to a level consistent with uncorrelated noise. We also show the effect of mutual magnetometer attraction, arguing that magnetometers should be placed at least one meter from one another.

gr-qc↗

arXiv2013

Correlated magnetic noise in global networks of gravitational-wave interferometers: observations and implications

One of the most ambitious goals of gravitational-wave astronomy is to observe the stochastic gravitational-wave background. Correlated noise in two or more detectors can introduce a systematic error, which limits the sensitivity of stochastic searches. We report on measurements of correlated magnetic noise from Schumann resonances at the widely separated LIGO and Virgo detectors. We investigate the effect of this noise on a global network of interferometers and derive a constraint on the allowable coupling of environmental magnetic fields to test mass motion in gravitational-wave detectors. We find that while correlated noise from global electromagnetic fields could be safely ignored for initial LIGO stochastic searches, it could severely impact Advanced LIGO and third-generation detectors.

astro-ph.IM↗