SearcharxivSearch

arXiv subjects

Roberto Spighi

Publications and source records attributed to Roberto Spighi.

8 recordsLinked to original sources

Measurement of 80-200 MeV/n $^{16}$O nuclear cross-section on Carbon and Polyethylene targets with the nuclear emulsion detector of the FOOT experiment

Accurate knowledge of nuclear fragmentation cross-sections is essential for optimizing charged particle therapy. In this study, conducted within the framework of the FOOT (FragmentatiOn Of Target) experiment, we present the first measurements with a large angular acceptance of total charge-changing cross-section and the cross-section for the production of fragments (production cross-section) for $^{16}$O ions interacting with Carbon (C) and Polyethylene (C$_2$H$_4$) targets in the kinetic energy range of 80 to 200 MeV/nucleon. Measurements were performed using the Emulsion Cloud Chamber (ECC) technique, which combines high spatial resolution and angular acceptance, up to 45$^\circ$. The results are compared with Monte Carlo model predictions. Moreover, the total charge-changing and fragment production cross-sections for $^{16}$O on Hydrogen in the same energy range are derived.

nucl-ex

A statistical model to identify excess mortality in Italy in the period 2011-2022

Excess mortality is defined as an increase in the number of deaths above what is expected based on historical trends, hereafter called baseline. In a previous paper, we introduced a statistical method that allows an unbiased and robust determination of the baseline to be used for the computation of excesses. A good determination of the baseline allows us to efficiently evaluate the excess of casualties that occurred in Italy in the last 12 years and in particular in the last 3 years due to the Coronavirus Disease 2019 (COVID-19) epidemic. To this extent, we have analyzed the data on mortality in Italy in the period January 1st 2011 to December 31th 2022, provided by the Italian National Institute of Statistics (ISTAT). The dataset contains information on deaths for all possible causes, without specific reference to any particular one. The data exhibit strikingly evident periodicity in the number of deaths with pronounced maxima in the winter and minima in the summer, repeating itself in amplitude along the whole twelve-year sample. Superimposed on this wave-like structure are often present excesses of casualties, most likely due to occasional causes of death such as the flu epidemics (in winter) and heat waves (in summer). The very accurate periodicity along the seasons (the "baseline"), allows us to determine with great accuracy and confidence the number of expected deaths for each day of the year in the absence of occasional contributions. Each of the latter can be modeled with an additional function that parameterizes the deviation from the baseline.

physics.med-ph

RIPTIDE: a novel recoil-proton track imaging detector for fast neutrons

Neutron detectors are an essential tool for the development of many research fields, as nuclear, particle and astroparticle physics as well as radiotherapy and radiation safety. Since neutrons cannot directly ionize, their detection is only possible via nuclear reactions. Consequently, neutron-based experimental techniques are related to the detection of charged particle or electromagnetic radiation originating from neutron-induced reactions. The study of fast neutrons is often based on the neutron-proton elastic scattering reaction. In this case, the ionization induced by the recoil protons in a hydrogenous material constitutes the basic information for the design and development of neutron detectors. Although experimental techniques have continuously improved and refined, so far, proton-recoil track imaging is still weak in laboratory rate environments because of the extremely small detection efficiency. To address this deficiency, we propose a novel recoil-proton track imaging system in which the light deriving from a fast scintillation signal is used to perform a complete reconstruction in space and time of the event. In particular, we report the idea of RIPTIDE (RecoIl Proton Track Imaging DEtector): an innovative system which combines a plastic scintillator coupled to imaging devices, based on CMOS technology, or Micro Channel Plate sensors. The proposed apparatus aims at providing neutron spectrometry capability by stereoscopically imaging the recoil-protons tracks, correlating the spatial information with the time information.

physics.ins-det

Study on the effects of the restrictive measures for containment of the COVID-19 pandemic on the reproduction number $R_t$ in Italian regions

Since November 6$^{\mathrm{th}}$, 2020, Italian regions have been classified according to four levels, corresponding to specific risk scenarios, for which specific restrictive measures have been foreseen. By analyzing the time evolution of the reproduction number $R_t$, we estimate how much different restrictive measures affect $R_t$, and we quantify the combined effect of the diffusion of virus variants and the beginning of the vaccination campaign upon the $R_t$ trend. We also compute the time delay between implementation of restrictive measures and the resulting effects. Three different models to describe the effects of restrictive measures are discussed and the results are cross-checked with two different algorithms for the computation of $R_t$.

physics.soc-ph

A simplified estimate of the Effective Reproduction Number $R_t$ using its relation with the doubling time and application to Italian COVID-19 data

A simplified method to compute $R_t$, the Effective Reproduction Number, is presented. The method relates the value of $R_t$ to the estimation of the doubling time performed with a local exponential fit. The condition $R_t = 1$ corresponds to a growth rate equal to zero or equivalently an infinite doubling time. Different assumptions on the probability distribution of the generation time are considered. A simple analytical solution is presented in case the generation time follows a gamma distribution.

physics.soc-ph

A statistical analysis of death rates in Italy for the years 2015-2020 and a comparison with the casualties reported for the COVID-19 pandemic

We analyze the data about casualties in Italy in the period 01/01/2015 to 30/09/2020 released by the Italian National Institute of Statistics (ISTAT). The data exhibit a clear sinusoidal behavior, whose fit allows for a robust subtraction of the baseline trend of casualties in Italy, with a surplus of mortality in correspondence to the flu epidemics in winter and to the hottest periods in summer. While these peaks are symmetric in shape, the peak in coincidence with the COVID-19 pandemics is asymmetric and more pronounced. We fit the former with a Gaussian function and the latter with a Gompertz function, in order to quantify number of casualties, the duration and the position of all causes of excess deaths. The overall quality of the fit to the data turns out to be very good. We discuss the trend of casualties in Italy by different classes of ages and for the different genders. We finally compare the data-subtracted casualties as reported by ISTAT with those reported by the Italian Department for Civil Protection (DPC) relative to the deaths directly attributed to COVID-19, and we discuss the differences.

physics.soc-ph

A study on the possible merits of using symptomatic cases to trace the development of the COVID-19 pandemic

In a recent work we introduced a novel method to compute the effective reproduction number $R_t$ and we applied it to describe the development of the COVID-19 outbreak in Italy. The study is based on the number of daily positive swabs as reported by the Italian Dipartimento di Protezione Civile. Recently, the Italian Istituto Superiore di Sanità made available the data relative of the symptomatic cases, where the reporting date is the date of beginning of symptoms instead of the date of the reporting of the positive swab. In this paper we will discuss merits and drawbacks of this data, quantitatively comparing the quality of the pandemic indicators computed with the two samples.

physics.soc-ph

The FragmentatiOn Of Target Experiment (FOOT) and its DAQ system

The FragmentatiOn Of Target (FOOT) experiment aims to provide precise nuclear cross-section measurements for two different fields: hadrontherapy and radio-protection in space. The main reason is the important role the nuclear fragmentation process plays in both fields, where the health risks caused by radiation are very similar and mainly attributable to the fragmentation process. The FOOT experiment has been developed in such a way that the experimental setup is easily movable and fits the space limitations of the experimental and treatment rooms available in hadrontherapy treatment centers, where most of the data takings are carried out. The Trigger and Data Acquisition system needs to follow the same criteria and it should work in different laboratories and in different conditions. It has been designed to acquire the largest sample size with high accuracy in a controlled and online-monitored environment. The data collected are processed in real-time for quality assessment and are available to the DAQ crew and detector experts during data taking.

physics.ins-det