arXiv subjects

Robin Röpke

Publications and source records attributed to Robin Röpke.

7 recordsLinked to original sources

arXiv2022

Superconducting Niobium Tip Electron Beam Source

Modern electron microscopy and spectroscopy is a key technology for studying the structure and composition of quantum and biological materials in fundamental and applied sciences. High-resolution spectroscopic techniques and aberration-corrected microscopes are often limited by the relatively large energy distribution of currently available beam sources. This can be improved by a monochromator, with the significant drawback of losing most of the beam current. Here, we study the field emission properties of a monocrystalline niobium tip electron field emitter at 5.2 K, well below the superconducting transition temperature. The emitter fabrication process can generate two tip configurations, with or without a nano-protrusion at the apex, strongly influencing the field-emission energy distribution. The geometry without the nano-protrusion has a high beam current, long-term stability, and an energy width of around 100 meV. The beam current can be increased by two orders of magnitude by xenon gas adsorption. We also studied the emitter performance up to 82 K and demonstrated the beam's energy width can be below 40 meV even at liquid nitrogen cooling temperatures when an apex nano-protrusion is present. Furthermore, the spatial and temporal electron-electron correlations of the field emission are studied at normal and superconducting temperatures and the influence of Nottingham heating is discussed. This new monochromatic source will allow unprecedented accuracy and resolution in electron microscopy, spectroscopy, and high-coherence quantum applications.

physics.app-ph↗

arXiv2022

Near-monochromatic tuneable cryogenic niobium electron field emitter

Creating, manipulating, and detecting coherent electrons is at the heart of future quantum microscopy and spectroscopy technologies. Leveraging and specifically altering the quantum features of an electron beam source at low temperatures can enhance its emission properties. Here, we describe electron field emission from a monocrystalline, superconducting niobium nanotip at a temperature of 5.9 K. The emitted electron energy spectrum reveals an ultra-narrow distribution down to 16 meV due to tunable resonant tunneling field emission via localized band states at a nano-protrusion's apex and a cut-off at the sharp low-temperature Fermi-edge. This is an order of magnitude lower than for conventional field emission electron sources. The self-focusing geometry of the tip leads to emission in an angle of 3.7 deg, a reduced brightness of 3.8 x 10exp8 A/(m2 sr V), and a stability of hours at 4.1 nA beam current and 69 meV energy width. This source will decrease the impact of lens aberration and enable new modes in low-energy electron microscopy, electron energy loss spectroscopy, and high-resolution vibrational spectroscopy.

physics.app-ph↗

arXiv2020

Information transfer by quantum matterwave modulation

Classical communication schemes that exploit wave modulation are the basis of the information era. The transfer of information based on the quantum properties of photons revolutionized these modern communication techniques. Here we demonstrate that also matterwaves can be applied for information transfer and that their quantum nature provides a high level of security. Our technique allows transmitting a message by a non-trivial modulation of an electron matterwave in a biprism interferometer. The data is encoded by a Wien filter introducing a longitudinal shift between separated matterwave packets. The transmission receiver is a delay line detector performing a dynamic contrast analysis of the fringe pattern. Our method relies on the Aharonov-Bohm effect and has no light optical analog since it does not shift the phase of the electron interference. A passive eavesdropping attack will cause decoherence and terminating the data transfer. This is demonstrated by introducing a semiconducting surface that disturbs the quantum state by Coulomb interaction and reduces the contrast. We also present a key distribution protocol based on the quantum nature of the matterwaves that can reveal active eavesdropping.

quant-ph↗

arXiv2020

Quantum decoherence by Coulomb interaction

The performance of modern quantum devices in communication, metrology or microscopy relies on the quantum-classical interaction which is generally described by the theory of decoherence. Despite the high relevance for long coherence times in quantum electronics, decoherence mechanisms mediated by the Coulomb force are not well understood yet and several competing theoretical models exist. Here, we present an experimental study of the Coulomb-induced decoherence of free electrons in a superposition state in a biprism electron interferometer close to a semiconducting and metallic surface. The decoherence was determined through a contrast loss at different beam path separations, surface distances and conductibilities. To clarify the current literature discussion, four theoretical models were compared to our data. We could rule out three of them and got good agreement with a theory based on macroscopic quantum electrodynamics. The results will enable the determination and minimization of specific decoherence channels in the design of novel quantum instruments.

quant-ph↗

arXiv2017

Coherent properties of a tunable low energy electron matter wave source

A general challenge in various quantum experiments and applications is to develop suitable sources for coherent particles. In particular, recent progress in microscopy, interferometry, metrology, decoherence measurements and chip based applications rely on intensive, tunable, coherent sources for free low energy electron matter waves. In most cases, the electrons get field emitted from a metal nanotip where its radius and geometry towards a counter electrode determines the field distribution and the emission voltage. A higher emission is often connected to faster electrons with smaller de Broglie wavelengths, requiring larger pattern magnification after matter wave diffraction or interferometry. This can be prevented with a well-known setup consisting of two counter electrodes that allow independent setting of the beam intensity and velocity. However, it needs to be tested if the coherent properties of such a source are preserved after the acceleration and deceleration of the electrons. Here, we study the coherence of the beam in a biprism interferometer with a single atom tip electron field emitter if the particle velocity and wavelength varies after emission. With a Wien filter measurement and a contrast correlation analysis we demonstrate that the intensity of the source at a certain particle wavelength can be enhanced up to a factor of 33 without changing the transverse and longitudinal coherence of the electron beam. In addition, the energy width of the single atom tip emitter was measured to be 377 meV, corresponding to a longitudinal coherence length of 82 nm. The design has potential applications in interferometry, microscopy and sensor technology

quant-ph↗

arXiv2017

Second-order correlations in single-particle interferometry

Interferometers with single particles are susceptible for dephasing perturbations from the environment, such as electromagnetic oscillations or mechanical vibrations. On the one hand, this limits sensitive quantum phase measurements as it reduces the interference contrast. On the other hand, it enables single-particle interferometers to be used as sensitive sensors for electromagnetic and mechanical perturbations. Recently, it was demonstrated experimentally, that a second-order correlation analysis can decrease the shielding and damping requirements significantly. Thereby, the relevant matter-wave characteristics and perturbation parameters could be extracted from the correlation analysis of a "washed-out" interference pattern and the undisturbed interferogram could be reconstructed. This method can be applied to all interferometers, that produce a spatial fringe pattern on a detector with high spatial and temporal single-particle resolution. In this article, we present and discuss in detail the used two-dimensional second-order correlation theory for multifrequency perturbations. The derivations of an explicit and approximate solution of the correlation function and corresponding amplitude spectra are provided. It is explained, how the numerical correlation function is extracted from the measurement data. Thereby, the influence of the temporal and spatial discretization step size on the extracted parameters is analyzed. The influence of noise on the correlation function and amplitude spectrum is calculated and numerically cross-checked by a comparison of our theory with numerical single-particle simulations. Our method can also be applied for the analysis of broad-band frequency noise, dephasing the interference pattern. Using Gaussian distributed noise in the simulations, we demonstrate that the relevant matter-wave parameters and the applied perturbation spectrum can be revealed.

quant-ph↗

arXiv2017

Vibrational dephasing in matter-wave interferometers

Matter-wave interferometry is a highly sensitive tool to measure small perturbations in a quantum system. This property allows the creation of precision sensors for dephasing mechanisms such as mechanical vibrations. They are a challenge for phase measurements under perturbing conditions that cannot be perfectly decoupled from the interferometer, e.g. for mobile interferometric devices or vibrations with a broad frequency range. Here, we demonstrate a method based on second-order correlation theory in combination with Fourier analysis, to use an electron interferometer as a sensor that precisely characterizes the mechanical vibration spectrum of the interferometer. Using the high spatial and temporal single-particle resolution of a delay line detector, the data allows to reveal the original contrast and spatial periodicity of the interference pattern from "washed-out" matter-wave interferograms that have been vibrationally disturbed in the frequency region between 100 and 1000 Hz. Other than with electromagnetic dephasing, due to excitations of higher harmonics and additional frequencies induced from the environment, the parts in the setup oscillate with frequencies that can be different to the applied ones. The developed numerical search algorithm is capable to determine those unknown oscillations and corresponding amplitudes. The technique can identify vibrational dephasing and decrease damping and shielding requirements in electron, ion, neutron, atom and molecule interferometers that generate a spatial fringe pattern on the detector plane.

quant-ph↗