arXiv subjects

Rodrigo A. González

Publications and source records attributed to Rodrigo A. González.

30 records · Page 2Linked to original sources

arXiv2023

Nonlinear Bayesian Identification for Motor Commutation: Applied to Switched Reluctance Motors

Switched Reluctance Motors (SRMs) enable power-efficient actuation with mechanically simple designs. This paper aims to identify the nonlinear relationship between torque, rotor angle, and currents, to design commutation functions that minimize torque ripple in SRMs. This is achieved by conducting specific closed-loop experiments using purposely imperfect commutation functions and identifying the nonlinear dynamics via Bayesian estimation. A simulation example shows that the presented method is robust to position-dependent disturbances, and experiments suggest that the identification method enables the design of commutation functions that significantly increase performance. The developed approach enables accurate identification of the torque-current-angle relationship in SRMs, without the need for torque sensors, an accurate linear model, or an accurate model of position-dependent disturbances, making it easy to implement in production.

eess.SY↗

arXiv2023

On the Relation between Discrete and Continuous-time Refined Instrumental Variable Methods

The Refined Instrumental Variable method for discrete-time systems (RIV) and its variant for continuous-time systems (RIVC) are popular methods for the identification of linear systems in open-loop. The continuous-time equivalent of the transfer function estimate given by the RIV method is commonly used as an initialization point for the RIVC estimator. In this paper, we prove that these estimators share the same converging points for finite sample size when the continuous-time model has relative degree zero or one. This relation does not hold for higher relative degrees. Then, we propose a modification of the RIV method whose continuous-time equivalent is equal to the RIVC estimator for any non-negative relative degree. The implications of the theoretical results are illustrated via a simulation example.

eess.SY↗

arXiv2023

Parsimonious Identification of Continuous-Time Systems: A Block-Coordinate Descent Approach

The identification of electrical, mechanical, and biological systems using data can benefit greatly from prior knowledge extracted from physical modeling. Parametric continuous-time identification methods can naturally incorporate this knowledge, which leads to interpretable and parsimonious models. However, some applications lead to model structures that lack parsimonious descriptions using unfactored transfer functions, which are commonly used in standard direct approaches for continuous-time system identification. In this paper we characterize this parsimony problem, and develop a block-coordinate descent algorithm that delivers parsimonious models by sequentially estimating an additive decomposition of the transfer function of interest. Numerical simulations show the efficacy of the proposed approach.

eess.SY↗

arXiv2023

Identifying Lebesgue-sampled Continuous-time Impulse Response Models: A Kernel-based Approach

Control applications are increasingly sampled non-equidistantly in time, including in motion control, networked control, resource-aware control, and event-triggered control. Some of these applications use measurement devices that sample equidistantly in the amplitude domain. The aim of this paper is to develop a non-parametric estimator of the impulse response of continuous-time systems based on such sampling strategy, known as Lebesgue-sampling. To this end, kernel methods are developed to formulate an algorithm that adequately takes into account the output intersample behavior, which ultimately leads to more accurate models and more efficient output sampling compared to the standard approach. The efficacy of this method is demonstrated through a mass-spring damper case study.

eess.SY↗

arXiv2023

An EM Algorithm for Lebesgue-sampled State-space Continuous-time System Identification

This paper concerns the identification of continuous-time systems in state-space form that are subject to Lebesgue sampling. Contrary to equidistant (Riemann) sampling, Lebesgue sampling consists of taking measurements of a continuous-time signal whenever it crosses fixed and regularly partitioned thresholds. The knowledge of the intersample behavior of the output data is exploited in this work to derive an expectation-maximization (EM) algorithm for parameter estimation of the state-space and noise covariance matrices. For this purpose, we use the incremental discrete-time equivalent of the system, which leads to EM iterations of the continuous-time state-space matrices that can be computed by standard filtering and smoothing procedures. The effectiveness of the identification method is tested via Monte Carlo simulations.

eess.SY↗

arXiv2021

Non-causal regularized least-squares for continuous-time system identification with band-limited input excitations

In continuous-time system identification, the intersample behavior of the input signal is known to play a crucial role in the performance of estimation methods. One common input behavior assumption is that the spectrum of the input is band-limited. The sinc interpolation property of these input signals yields equivalent discrete-time representations that are non-causal. This observation, often overlooked in the literature, is exploited in this work to study non-parametric frequency response estimators of linear continuous-time systems. We study the properties of non-causal least-square estimators for continuous-time system identification, and propose a kernel-based non-causal regularized least-squares approach for estimating the band-limited equivalent impulse response. The proposed methods are tested via extensive numerical simulations.

eess.SY↗

arXiv2021

Consistent identification of continuous-time systems under multisine input signal excitation

For many years, the Simplified Refined Instrumental Variable method for Continuous-time systems (SRIVC) has been widely used for identification. The intersample behaviour of the input plays an important role in this method, and it has been shown recently that the SRIVC estimator is not consistent if an incorrect assumption on the intersample behaviour is considered. In this paper, we present an extension of the SRIVC algorithm that is able to deal with continuous-time multisine signals, which cannot be interpolated exactly through hold reconstructions. The proposed estimator is generically consistent for any input reconstructed through zero or first-order-hold devices, and we show that it is generically consistent for continuous-time multisine inputs as well. The statistical performance of the proposed estimator is compared to the standard SRIVC estimator through extensive simulations.

eess.SY↗

arXiv2020

Efficiency Analysis of the Simplified Refined Instrumental Variable Method for Continuous-time Systems

In this paper, we derive the asymptotic Cramér-Rao lower bound for the continuous-time output error model structure and provide an analysis of the statistical efficiency of the Simplified Refined Instrumental Variable method for Continuous-time systems (SRIVC) based on sampled data.It is shown that the asymptotic Cramér-Rao lower bound is independent of the intersample behaviour of the noise-free system output and hence only depends on the intersample behaviour of the system input. We have also shown that, at the converging point of the SRIVC algorithm, the estimates do not depend on the intersample behaviour of the measured output. It is then proven that the SRIVC estimator is asymptotically efficient for the output error model structure under mild conditions. Monte Carlo simulations are performed to verify the asymptotic Cramér-Rao lower bound and the asymptotic covariance of the SRIVC estimates.

eess.SY↗

arXiv2020

Finite sample deviation and variance bounds for first order autoregressive processes

In this paper, we study finite-sample properties of the least squares estimator in first order autoregressive processes. By leveraging a result from decoupling theory, we derive upper bounds on the probability that the estimate deviates by at least a positive $\varepsilon$ from its true value. Our results consider both stable and unstable processes. Afterwards, we obtain problem-dependent non-asymptotic bounds on the variance of this estimator, valid for sample sizes greater than or equal to seven. Via simulations we analyze the conservatism of our bounds, and show that they reliably capture the true behavior of the quantities of interest.

math.ST↗

arXiv2020

A Finite-Sample Deviation Bound for Stable Autoregressive Processes

In this paper, we study non-asymptotic deviation bounds of the least squares estimator in Gaussian AR($n$) processes. By relying on martingale concentration inequalities and a tail-bound for $χ^2$ distributed variables, we provide a concentration bound for the sample covariance matrix of the process output. With this, we present a problem-dependent finite-time bound on the deviation probability of any fixed linear combination of the estimated parameters of the AR$(n)$ process. We discuss extensions and limitations of our approach.

stat.ML↗

arXiv2019

Consistency Analysis of the Simplified Refined Instrumental Variable Method for Continuous-time Systems

In this paper, we analyse the consistency of the Simplified Refined Instrumental Variable method for Continuous-time systems (SRIVC). It is well known that the intersample behaviour of the input signal influences the quality and accuracy of the results when estimating and simulating continuous-time models. Here, we present a comprehensive analysis on the consistency of the SRIVC estimator while taking into account the intersample behaviour of the input signal. The main result of the paper shows that, under some mild conditions, the SRIVC estimator is generically consistent. We also describe some conditions when consistency is not achieved, which is important from a practical standpoint. The theoretical results are supported by simulation examples.

eess.SY↗

arXiv2018

An asymptotically optimal indirect approach to continuous-time system identification

The indirect approach to continuous-time system identification consists in estimating continuous-time models by first determining an appropriate discrete-time model. For a zero-order hold sampling mechanism, this approach usually leads to a transfer function estimate with relative degree 1, independent of the relative degree of the strictly proper real system. In this paper, a refinement of these methods is developed. Inspired by indirect PEM, we propose a method that enforces a fixed relative degree in the continuous-time transfer function estimate, and show that the resulting estimator is consistent and asymptotically efficient. Extensive numerical simulations are put forward to show the performance of this estimator when contrasted with other indirect and direct methods for continuous-time system identification.

eess.SY↗