arXiv subjects

Rogelio Ortigosa

Publications and source records attributed to Rogelio Ortigosa.

6 recordsLinked to original sources

arXiv2026

On limitations of polyconvexity

Polyconvex constitutive modeling is attractive as it guarantees stability of numerical simulations and can improve the generalization behavior of material models. However, in certain applications, polyconvex formulations perform poorly in reproducing the underlying ground truth material response, which can effectively preclude their practical use. In this work, we address this issue and investigate the limitations of polyconvex constitutive modeling. The main contributions of this paper are as follows: (1) We analyze the theoretical reasons why polyconvexity may, in some cases, impose overly restrictive constraints that limit the achievable accuracy of constitutive models. Thereby, we provide analytical ellipticity guarantees for two non-polyconvex Mooney-Rivlin type potentials. (2) We investigate the practical limitations of polyconvex physics-augmented neural network constitutive models using two representative formulations: models using structural tensor-based invariants and models using signed singular values. Their performance is evaluated on datasets obtained from homogenized microstructured materials, and their predictive capabilities are assessed in finite element simulations. (3) Overall, we provide an overview of benefits, limitations, and mitigation strategies of polyconvex constitutive modeling.

cs.CE↗

arXiv2026

Advances in polyconvex anisotropic hyperelasticity

A key challenge in material theory is the formulation of models that satisfy all common mechanical constitutive conditions while retaining sufficient flexibility. In this context, several important modeling aspects remain unresolved for polyconvex anisotropic hyperelasticity. We address some of these challenges and apply our results for physics-augmented neural network (PANN) constitutive modeling. The main contributions of this paper are as follows: (1) We propose a new polyconvex PANN constitutive model for anisotropic hyperelasticity based on triclinic invariants and group symmetrization. For finite symmetry groups, this model fulfills all common mechanical constitutive conditions a priori. (2) We propose a group symmetrization-based method for the construction of polyconvex invariants for finite symmetry groups. Based on this, we derive a new integrity basis for a tetragonal symmetry group and a new functional basis for a cubic symmetry group. To the best of our knowledge, these are the first polyconvex integrity or functional bases for symmetry groups characterized by structural tensors of order higher than two. (3) We provide an extensive introduction to the construction of polyconvex integrity and functional bases, which form the basis of polyconvex invariant-based constitutive models. We discuss polyconvex bases for triclinic, isotropic, transversely isotropic, monoclinic, rhombic, tetragonal, and cubic symmetry groups. (4) We benchmark the polyconvex PANN constitutive models with highly nonlinear homogenization data of cubic metamaterials.

cs.CE↗

arXiv2024

Generalised tangent stabilised nonlinear elasticity: An automated framework for controlling material and geometric instabilities

Tangent stabilised large strain isotropic elasticity was recently proposed by Poya et al. [1] wherein by working directly with principal stretches the entire eigenstructure of constitutive and geometric/initial stiffness terms were found in closed-form, giving fresh insights into exact convexity conditions of highly non-convex functions in discrete settings. Consequently, owing to these tangent eigenvalues an analytic tangent stabilisation was proposed bypassing incumbent numerical approaches routinely used in nonlinear finite element analysis. This formulation appears to be extremely robust for quasi-static simulation of complex deformations even with no load increments and time stepping while still capturing instabilities automatically in ways that are infeasible for path-following techniques in practice. In this work, we generalise the notion of tangent stabilised elasticity to virtually all known invariant formulations of nonlinear elasticity. We show that, closed-form eigen-decomposition of tangents is easily available irrespective of invariant formulation or integrity basis. In particular, we work out closed-form tangent eigensystems for isotropic Total Lagrangian deformation gradient (F )-based and right Cauchy-Green (C)-based as well as Updated Lagrangian left Cauchy-Green (b)-based formulations and present their exact convexity conditions postulated in terms of their corresponding tangent and initial stiffness eigenvalues. In addition, we introduce the notion of geometrically stabilised polyconvex large strain elasticity for models that are materially stable but exhibit geometric instabilities for whom we construct their initial stiffness in a spectrally-decomposed form analytically. We further extend this framework to the case of transverse isotropy where once again, closed-form tangent eigensystems are found for common transversely isotropic invariants.

physics.comp-ph↗

arXiv2024

Nonlinear electro-elastic finite element analysis with neural network constitutive models

In the present work, the applicability of physics-augmented neural network (PANN) constitutive models for complex electro-elastic finite element analysis is demonstrated. For the investigations, PANN models for electro-elastic material behavior at finite deformations are calibrated to different synthetically generated datasets, including an analytical isotropic potential, a homogenised rank-one laminate, and a homogenised metamaterial with a spherical inclusion. Subsequently, boundary value problems inspired by engineering applications of composite electro-elastic materials are considered. Scenarios with large electrically induced deformations and instabilities are particularly challenging and thus necessitate extensive investigations of the PANN constitutive models in the context of finite element analyses. First of all, an excellent prediction quality of the model is required for very general load cases occurring in the simulation. Furthermore, simulation of large deformations and instabilities poses challenges on the stability of the numerical solver, which is closely related to the constitutive model. In all cases studied, the PANN models yield excellent prediction qualities and a stable numerical behavior even in highly nonlinear scenarios. This can be traced back to the PANN models excellent performance in learning both the first and second derivatives of the ground truth electro-elastic potentials, even though it is only calibrated on the first derivatives. Overall, this work demonstrates the applicability of PANN constitutive models for the efficient and robust simulation of engineering applications of composite electro-elastic materials.

cs.CE↗

arXiv2023

A systematic comparison between Membrane, Shell, and 3D Solid formulations for non-linear vascular biomechanics

Typical computational techniques for vascular biomechanics represent the blood vessel wall via either a membrane, a shell, or a 3D solid element. Each of these formulations has its trade offs concerning accuracy, ease of implementation, and computational costs. Despite the widespread use of these formulations, a systematic comparison on the performance and accuracy of these formulations for nonlinear vascular biomechanics is lacking. Therefore, the decision regarding the optimal choice often relies on intuition or previous experience, with unclear consequences of choosing one approach over the other. Here, we present a systematic comparison among three different formulations to represent vessel wall: (i) a nonlinear membrane model, (ii) a nonlinear, rotation-free shell model, and (iii) a nonlinear 3D solid model. For the 3D solid model, we consider two different implementations employing linear and quadratic interpolation. We present comparison results in both idealized and subject-specific mouse geometries. For the idealized cylindrical geometry, we compare our results against the axisymmetric solution for three different wall thickness to radius ratio. Subsequently, a comparison of these approaches is presented in an idealized bifurcation model for regionally varying wall thickness. Lastly, we present the comparison results for a subject-specific mouse geometry with regionally varying material properties and wall thickness, while incorporating the effect of external tissue surrounding the vessel wall.

physics.bio-ph↗

arXiv2022

Finite electro-elasticity with physics-augmented neural networks

In the present work, a machine learning based constitutive model for electro-mechanically coupled material behavior at finite deformations is proposed. Using different sets of invariants as inputs, an internal energy density is formulated as a convex neural network. In this way, the model fulfills the polyconvexity condition which ensures material stability, as well as thermodynamic consistency, objectivity, material symmetry, and growth conditions. Depending on the considered invariants, this physics-augmented machine learning model can either be applied for compressible or nearly incompressible material behavior, as well as for arbitrary material symmetry classes. The applicability and versatility of the approach is demonstrated by calibrating it on transversely isotropic data generated with an analytical potential, as well as for the effective constitutive modeling of an analytically homogenized, transversely isotropic rank-one laminate composite and a numerically homogenized cubic metamaterial. These examinations show the excellent generalization properties that physics-augmented neural networks offer also for multi-physical material modeling such as nonlinear electro-elasticity.

cs.CE↗