arXiv subjects

Roger Barlow

Publications and source records attributed to Roger Barlow.

At least 19 recordsLinked to original sources

arXiv2025

MuCol Milestone Report No. 7: Consolidated Parameters

This document is comprised of a collection of consolidated parameters for the key parts of the muon collider. These consolidated parameters follow on from the October 2024 Preliminary Parameters Report. Attention has been given to a high-level consistent set of baseline parameters throughout all systems of the complex, following a 10 TeV center-of-mass design. Additional details of the designs contributing to this baseline design are featured in the appendix. Likewise, explorative variations from this baseline set can be found in the appendix. The data is collected from a collaborative spreadsheet and transferred to overleaf.

physics.acc-ph↗

arXiv2025

IsoDAR@Yemilab: Preliminary Design Report -- Volume I: Cyclotron Driver

This Preliminary Design Report (PDR) describes the IsoDAR electron-antineutrino source in two volumes which are mostly site-independent and describe the cyclotron driver providing a 60 MeV, 10 mA proton beam (this Volume); and the medium energy beam transport line (MEBT) and target (Volume II). The IsoDAR driver and target will produce about 1.15e23 electron-antineutrinos over five years. Paired with a kton-scale liquid scintillator detector, it will enable a broad particle physics program including searches for new symmetries, new interactions and new particles. Here in Volume I, we describe the driver, which includes the ion source, low energy beam transport, and cyclotron. The latter features Radio-Frequency Quadrupole (RFQ) direct axial injection and represents the first accelerator purpose-built to make use of so-called vortex motion.

physics.acc-ph↗

arXiv2025

IsoDAR@Yemilab: Preliminary Design Report -- Volume II: Medium Energy Beam Transport, Neutrino Source, and Shielding

This Preliminary Design Report (PDR) describes the IsoDAR electron-antineutrino source in two volumes which are mostly site-independent and describe the cyclotron driver providing a 60 MeV, 10 mA proton beam (Volume I); and the medium energy beam transport line (MEBT) and target (this Volume). The IsoDAR driver and target will produce about $1.15\cdot10^{23}$ electron-antineutrinos over five calendar years. Paired with a kton-scale liquid scintillator detector, this will enable a broad particle physics program including searches for new symmetries, new interactions and new particles. Here in Volume II, we describe the medium energy beam transport line, the antineutrino source beam-target and surrounding sleeve, shielding, and plans for monitoring and installation.

hep-ex↗

arXiv2025

Asymmetric Errors

We present a procedure for handling asymmetric errors. Many results in particle physics are presented as values with different positive and negative errors, and there is no consistent procedure for handling them. We consider the difference between errors quoted using pdfs and using likelihoods, and the difference between the rms spread of a measurement and the 68\% central confidence region. We provide a comprehensive analysis of the possibilities, and software tools to enable their use.

stat.ME↗

arXiv2025

The Muon Collider

Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an electron-positron collider, yielding a physics potential significantly greater than the sum of its individual parts. A high-energy muon collider is the natural next step in the exploration of fundamental physics after the HL-LHC and a natural complement to a future low-energy Higgs factory. Such a facility would significantly broaden the scope of particle colliders, engaging the many frontiers of the high energy community. The last European Strategy for Particle Physics Update and later the Particle Physics Project Prioritisation Panel in the US requested a study of the muon collider, which is being carried on by the International Muon Collider Collaboration. In this comprehensive document we present the physics case, the state of the work on accelerator design and technology, and propose an R\&D project that can make the muon collider a reality.

physics.acc-ph↗

arXiv2024

MuCol Milestone Report No. 5: Preliminary Parameters

This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power consumption of the facility. The data is collected from a collaborative spreadsheet and transferred to overleaf.

physics.acc-ph↗

arXiv2024

Neutrino yield and neutron shielding calculations for a high-power target installed in an underground setting

With the ever increasing beam power at particle accelerator-based facilities for nuclear and particle physics, radioactive isotope production, and nuclear engineering, targets that can withstand this power, and shielding of secondary particles are becoming increasingly important. Here we present Monte Carlo (MC) calculations using the well-established Geant4 software to optimise and predict the antineutrino yield of a $^8$Li Decay-At-Rest (DAR) source. The source relies on 600~kW of beam power from a continuous wave proton beam impinging on a beryllium target, where spallation neutrons capture on $^7$Li to produce the $^8$Li. We further present an in-depth treatment of the neutron shielding surrounding this target. We show that we can produce the high antineutrino flux needed for the discovery-level experiment IsoDAR, searching for ``sterile'' neutrinos (predicted new fundamental particles) and other beyond standard model physics, while maintaining a neutron flux in the detector that is below natural backgrounds. The methods presented in this paper are easily transferable to other high-power targets and their associated shielding.

hep-ex↗

arXiv2023

Towards a Muon Collider

A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.

physics.acc-ph↗

arXiv2022

IsoDAR@Yemilab: A Report on the Technology, Capabilities, and Deployment

IsoDAR@Yemilab is a novel isotope-decay-at-rest experiment that has preliminary approval to run at the Yemi underground laboratory (Yemilab) in Jeongseon-gun, South Korea. In this technical report, we describe in detail the considerations for installing this compact particle accelerator and neutrino target system at the Yemilab underground facility. Specifically, we describe the caverns being prepared for IsoDAR, and address installation, hielding, and utilities requirements. To give context and for completeness, we also briefly describe the physics opportunities of the IsoDAR neutrino source when paired with the Liquid Scintillator Counter (LSC) at Yemilab, and review the technical design of the neutrino source.

physics.ins-det↗

arXiv2020

Merlin++, a flexible and feature-rich accelerator physics and particle tracking library

Merlin++ is a C++ charged-particle tracking library developed for the simulation and analysis of complex beam dynamics within high energy particle accelerators. Accurate simulation and analysis of particle dynamics is an essential part of the design of new particle accelerators, and for the optimization of existing ones. Merlin++ is a feature-full library with focus on long-term tracking studies. A user may simulate distributions of protons or electrons in either single particle or sliced macro-particle bunches. The tracking code includes both straight and curvilinear coordinate systems allowing for the simulation of either linear or circular accelerator lattice designs, and uses a fast and accurate explicit symplectic integrator. Physics processes for common design studies have been implemented, including RF cavity acceleration, synchrotron radiation damping, on-line physical aperture checks and collimation, proton scattering, wakefield simulation, and spin-tracking. Merlin++ was written using C++ object orientated design practices and has been optimized for speed using multicore processors. This article presents an account of the program, including its functionality and guidance for use.

physics.acc-ph↗

arXiv2020

Medical Isotope Production with the IsoDAR Cyclotron

Authors describe technical advances that will allow the IsoDAR cyclotron -- being developed for neutrino physics research -- to produce medical isotopes more efficiently than existing cyclotrons can.

physics.acc-ph↗

arXiv2020

What is the Potential Impact of the IsoDAR Cyclotron on Radioisotope Production: A Review

The IsoDAR collaboration is developing a high-current cyclotron for a neutrino search experiment. Designed to deliver 10 mA of 60 MeV protons, the current and power of this cyclotron far exceed those of existing accelerators, opening new possibilities for the production of radiopharmaceutical isotopes, producing very high-activity samples in very short times. The cyclotron can also be easily configured to deliver ions other than protons including 1 mA of alpha particles at 240 MeV: this flexibility gives a broad reach into new areas of isotope production. We explain how IsoDAR overcomes the beam limits of commercial cyclotrons, and how it could represent the next step in isotope production rates.

physics.acc-ph↗

arXiv2017

Intensity limits of the PSI Injector II cyclotron

We investigate limits on the current of the PSI Injector II high intensity separate-sector isochronous cyclotron, in its present configuration and after a proposed upgrade. Accelerator Driven Subcritical Reactors, neutron and neutrino experiments, and medical isotope production all benefit from increases in current, even at the ~ 10% level: the PSI cyclotrons provide relevant experience. As space charge dominates at low beam energy, the injector is critical. Understanding space charge effects and halo formation through detailed numerical modelling gives clues on how to maximise the extracted current. Simulation of a space-charge dominated low energy high intensity (9.5 mA DC) machine, with a complex collimator set up in the central region shaping the bunch, is not trivial. We use the OPAL code, a tool for charged-particle optics calculations in large accelerator structures and beam lines, including 3D space charge. We have a precise model of the present production) Injector II, operating at 2.2 mA current. A simple model of the proposed future (upgraded) configuration of the cyclotron is also investigated. We estimate intensity limits based on the developed models, supported by fitted scaling laws and measurements. We have been able to perform more detailed analysis of the bunch parameters and halo development than any previous study. Optimisation techniques enable better matching of the simulation set-up with Injector II parameters and measurements. We show that in the production configuration the beam current scales to the power of three with the beam size. However, at higher intensities, 4th power scaling is a better fit, setting the limit of approximately 3 mA. Currents of over 5 mA, higher than have been achieved to date, can be produced if the collimation scheme is adjusted.

physics.acc-ph↗

arXiv2013

Simulations of Pion Production in the DAEδALUS Target

DAEδALUS, the Decay At-rest Experiment for δ_{CP} at a Laboratory for Underground Science will look for evidence of CP-violation in the neutrino sector, an ingredient in theories that seek to explain the matter/antimatter asymmetry in our universe. It will make a precision measurement of the oscillations of muon antineutrinos to electron antineutrinos using multiple neutrino sources created by low-cost compact cyclotrons. The experiment utilizes decay-at-rest neutrino beams produced by 800 MeV protons impinging a beam target of graphite and copper. Two well established Monte Carlo codes, MARS and GEANT4, have been used to optimise the design and the performance of the target. A study of the results obtained with these two codes is presented in this paper.

physics.ins-det↗

arXiv2012

Target Studies for the Production of Lithium8 for Neutrino Physics Using a Low Energy Cyclotron

Lithium 8 is a short lived beta emitter producing a high energy anti-neutrino, which is very suitable for making several measurements of fundamental quantities. It is proposed to produce Lithium 8 with a commercially available 60 MeV cyclotron using protons or alpha particles on a Beryllium 9 target. We have used the GEANT4 program to model these processes, and calculate the anti-neutrino fluxes that could be obtained in a practical system. We also calculate the production of undesirable contaminants such as Boron 8, and show that these can be reduced to a very low level.

physics.acc-ph↗

arXiv2011

Experimental status of B to tau nu and B to l nu (gamma)

The experimental results of the \babar\ and Belle collaborations are presented on the measurement of the branching ratio for the decay $B^\pm \to τ^\pm ν$, and the limits set on the branching ratios for the decays $B^\pm \to e^\pm ν, B^\pm \to e^\pm νγ,B^\pm \to μ^\pm ν$ and $B^\pm \to μ^\pm νγ$

hep-ex↗

arXiv2004

Asymmetric Statistical Errors

Asymmetric statistical errors arise for experimental results obtained by Maximum Likelihood estimation, in cases where the number of results is finite and the log likelihood function is not a symmetric parabola. This note discusses how separate asymmetric errors on a single result should be combined, and how several results with asymmetric errors should be combined to give an overall measurement. In the process it considers several methods for parametrising curves that are approximately parabolic.

physics.data-an↗

arXiv2004

A note on Delta ln L = -1/2 Errors

The points at which the log likelihood falls by 1/2 from its maximum value are often used to give the `errors' on a result, i.e. the 68% central confidence interval. The validity of this is examined for two simple cases: a lifetime measurement and a Poisson measurement. Results are compared with the exact Neyman construction and with the simple Bartlett approximation. It is shown that the accuracy of the log likelihood method is poor, and the Bartlett construction explains why it is flawed.

physics.data-an↗