arXiv subjects
Publications and source records attributed to Roland Ryf.
We demonstrate OESCL-band same-wavelength bi-directional transmission over 60 km HCF with 42.5 THz bandwidth, achieving GMIs comparable with the highest unidirectional SMF data-rates in both directions, with an aggregate of 423.7 + 426.5 Tb/s.
We demonstrate continuous distributed acoustic sensing over a 4400km long undersea cable. Bi-directional operation improves the strain signal-to-noise rate by >20dB, enabling 88000 50-m-spaced measurement points at a nominal telecom launch power.
We detect the recent M8.8 mega-earthquake in Eastern Russia, on a 4400km long active telecom cable in the Pacific Ocean. The resolution achieved 100m represents the highest spatial resolution, the largest number of ocean-bottom sensors, and the first fiber-optic deep-ocean observation of a tsunami wave.
We report tele-seismic waves detection from multiple earthquakes on an operational subsea cable from Iceland to Ireland. Using per-span laser interferometry with 100km spacing, we report clear detection of S-, P- and surface waves from multiple world-wide earthquakes, enabling seismic analysis for early warning applications.
We showcase an application that leverages multiple agents, powered by large language models and integrated tools, to collaboratively solve complex network operation tasks across various domains. The tasks include real-time topology retrieval, network optimization using physical models, and fiber switching facilitated by a robotic arm.
We experimentally demonstrate the first carrier- and LO-free 800G/{\lambda} receiver enabling direct compatibility with standard coherent transmitters via phase retrieval, achieving net 835-Gb/s transmission over 100-km SMF and record 8.27-b/s/Hz net optical spectral efficiency.
We experimentally investigate transmitting high-order quadrature amplitude modulation (QAM) signals with carrierless and intensity-only measurements with phase retrieval (PR) receiving techniques. The intensity errors during measurement, including noise and distortions, are found to be a limiting factor for the precise convergence of the PR algorithm. To improve the PR reconstruction accuracy, we propose a distortion-aware PR scheme comprising both training and reconstruction stages. By estimating and emulating the distortion caused by various channel impairments, the proposed scheme enables enhanced agreement between the estimated and measured amplitudes throughout the PR iteration, thus resulting in improved reconstruction performance to support high-order QAM transmission. With the aid of proposed techniques, we experimentally demonstrate 50-GBaud 16QAM and 32QAM signals transmitting through a standard single-mode optical fiber (SSMF) span of 40 and 80 km, and achieve bit error rates (BERs) below the 6.25% hard decision (HD)-forward error correction (FEC) and 25% soft decision (SD)-FEC thresholds for the two modulation formats, respectively. By tuning the pilot symbol ratio and applying concatenated coding, we also demonstrate that a post-FEC data rate of up to 140 Gb/s can be achieved for both distances at an optimal pilot symbol ratio of 20%.
We propose and implement a novel fibre sensing control device and associated sensing control plane that effectively controls backscatter and polarization-based fibre sensing. We experimentally demonstrate in a fibre network that this device and associated control plane can achieve sub-us response time.
We experimentally demonstrate optical detection at 12.5~bits per incident photon, 9.4~dB higher than the theoretical limit of conventional coherent detection. A single laser transmits both data and optical clock, undergoes 77~dB of attenuation before quantum detection followed by optical clock and data recovery.
We monitor a 524km live network link using an FPGA-based sensing-capable coherent transceiver prototype during a human-caused cable break. Post-analysis of polarization data reveals minute-level potential warning precursors and baseline-exceeding changes directly preceding the break.
We demonstrate the digital twin of a network, network elements, and operating environment using machine learning. We achieve network card failure localization and remote collaboration over 86 km of fiber using augmented reality.
In this work we demonstrate an FPGA-based coherent optical frequency domain reflectometry setup for cable monitoring. Using coherent detection for averaging and narrowband filtering, we significantly improve the signal-to-noise ratio (SNR) compared to traditional intensity-only techniques while also enabling continuous monitoring of phase and polarization. In addition, the probe signal has constant power, avoiding the nonlinear distortions and thereby enabling continuous use without interfering with data channels. We perform a field demonstration over a trans-oceanic cable using loopback configurations present in each repeater, demonstrating measurement SNR exceeding 30 dB for all about 80 repeaters with an averaging window of 1 second. We furthermore compare cable monitoring using coherent processing to today's solutions using power-only measurements. Our results show how transitioning to coherent technology for cable monitoring can improve sensitivity and enable new types of monitoring, exploring knowledge gained from transitioning from incoherent to coherent data transmission.
Off-axis digital holography is used to align a few-mode fiber to a multi-mode fiber in a free-space optical setup. Alignment based on power coupling measurements alone cannot guarantee low mode-dependent loss. The proposed alignment method enables reliable fiber coupling with low mode-dependent loss and crosstalk.
Angular resolved digital holography is presented as a technique for real-time characterization of the full optical field (amplitude and phase) of space-division multiplexing components and fibers, here a 6-mode photonic-lantern is characterized.
The increase in capacity provided by coupled SDM systems is fundamentally limited by MDG and ASE noise. Therefore, monitoring MDG and optical SNR is essential for accurate performance evaluation and troubleshooting. Recent works show that the conventional MDG estimation method based on the transfer matrix of MIMO equalizers optimizing the MMSE underestimates the actual value at low SNR. Besides, estimating the optical SNR itself is not a trivial task in SDM systems, as MDG strongly influences the electrical SNR after the equalizer. In a recent work we propose an MDG and SNR estimation method using ANN. The proposed ANN-based method processes features extracted at the receiver after DSP. In this paper, we discuss the ANN-based method in detail, and validate it in an experimental 73-km 3-mode transmission link with controlled MDG and SNR. After validation, we apply the method in a case study consisting of an experimental long-haul 6-mode link. The results show that the ANN estimates both MDG and SNR with high accuracy, outperforming conventional methods.
Time-of-flight measurements are key to study distributed mode coupling and differential mode group delay (DMDG) in multimode fibers (MMFs). However, current approaches using regular photodetectors with limited sensitivity preclude the detection of weak modal interactions in such fibers masking interesting physical effects. Here we demonstrate the use of high-sensitivity superconducting nanowire single-photon detectors (SNSPDs) to measure the mode transfer matrix of a commercial graded-index multimode fiber. Two high performance 45-mode multi-plane light conversion (MPLC) devices served as the mode multiplexer/demultiplexer. Distributed mode coupling and DMDG among different mode groups are accurately quantified from the impulse response measurement. We also observed cladding modes of the MMF as a pedestal of the pulse in the measurement. This work paves way for applications such as quantum communications using many spatial modes of the fiber.
We implement a real-time coherent transceiver with fast streaming outputs for environmental sensing. Continuous sensing using phase and equalizer outputs over 12800km of a submarine cable is demonstrated to enable time resolved spectroscopy in broad spectral range of 10mHz - 1kHz.
We experimentally demonstrate a record net capacity per wavelength of 1.23~Tb/s over a single silicon-on-insulator (SOI) multimode waveguide for optical interconnects employing on-chip mode-division multiplexing and 11$\times$11 multiple-in-multiple-out (MIMO) digital signal processing.