arXiv subjects

Roland Tóth

Publications and source records attributed to Roland Tóth.

At least 109 records · Page 6Linked to original sources

arXiv2021

On the Use of the Smith-McMillan Form in Decoupling System Dynamics

In this paper, the use of the Smith-McMillan form in decoupling multiple-input multiple-output system dynamics is analyzed. In short, from a transfer matrix plant model one can obtain a decoupling compensator which leads to a decoupled plant that contains the same transmission poles and zeros of the transfer matrix of the original system. As a result, full decoupling of the plant transfer matrix is obtained for all frequencies, which can be individually addressed by single-input single-output control. The aim of this paper is to present conditions for the decoupled system that guarantee internal stability and performance requirements for the overall control system. Performance specifications are defined in terms of magnitude limits for the maximum singular value of the closed-loop transfer matrices. The potential of the decoupling procedure is shown in a simulation study of a mechanical system.

eess.SY↗

arXiv2021

Learning-based feedforward augmentation for steady state rejection of residual dynamics on a nanometer-accurate planar actuator system

Growing demands in the semiconductor industry result in the need for enhanced performance of lithographic equipment. However, position tracking accuracy of high precision mechatronics is often limited by the presence of disturbance sources, which originate from unmodelled or unforeseen deterministic environmental effects. To negate the effects of these disturbances, a learning based feedforward controller is employed, where the underlying control policy is estimated from experimental data based on Gaussian Process regression. The proposed approach exploits the property of including prior knowledge on the expected steady state behaviour of residual dynamics in terms of kernel selection. Corresponding hyper-parameters are optimized using the maximization of the marginalized likelihood. Consequently, the learned function is employed as augmentation of the currently employed rigid body feedforward controller. The effectiveness of the augmentation is experimentally validated on a magnetically levitated planar motor stage. The results of this paper demonstrate the benefits and possibilities of machine-learning based approaches for compensation of static effects, which originate from residual dynamics, such that position tracking performance for moving-magnet planar motor actuators is improved.

eess.SY↗

arXiv2021

Nonlinear parameter-varying state-feedback design for a gyroscope using virtual control contraction metrics

In this paper, we present a virtual control contraction metric (VCCM) based nonlinear parameter-varying (NPV) approach to design a state-feedback controller for a control moment gyroscope (CMG) to track a user-defined trajectory set. This VCCM based nonlinear stabilization and performance synthesis approach, which is similar to linear parameter-varying (LPV) control approaches, allows to achieve exact guarantees of exponential stability and $\mathcal{L}_2$-gain performance on nonlinear systems with respect to all trajectories from the predetermined set, which is not the case with the conventional LPV methods. Simulation and experimental studies conducted in both fully- and under-actuated operating modes of the CMG show effectiveness of this approach compared to standard LPV control methods.

eess.SY↗

arXiv2021

LPV Modeling of Nonlinear Systems: A Multi-Path Feedback Linearization Approach

This paper introduces a systematic approach to synthesize linear parameter-varying (LPV) representations of nonlinear (NL) systems which are described by input affine state-space (SS) representations. The conversion approach results in LPV-SS representations in the observable canonical form. Based on the relative degree concept, first the SS description of a given NL representation is transformed to a normal form. In the SISO case, all nonlinearities of the original system are embedded into one NL function, which is factorized, based on a proposed algorithm, to construct an LPV representation of the original NL system. The overall procedure yields an LPV model in which the scheduling variable depends on the inputs and outputs of the system and their derivatives, achieving a practically applicable transformation of the model in case of low order derivatives. In addition, if the states of the NL model can be measured or estimated, then a modified procedure is proposed to provide LPV models scheduled by these states. Examples are included to demonstrate both approaches.

eess.SY↗

arXiv2020

A Tree Adjoining Grammar Representation for Models Of Stochastic Dynamical Systems

Model structure and complexity selection remains a challenging problem in system identification, especially for parametric non-linear models. Many Evolutionary Algorithm (EA) based methods have been proposed in the literature for estimating model structure and complexity. In most cases, the proposed methods are devised for estimating structure and complexity within a specified model class and hence these methods do not extend to other model structures without significant changes. In this paper, we propose a Tree Adjoining Grammar (TAG) for stochastic parametric models. TAGs can be used to generate models in an EA framework while imposing desirable structural constraints and incorporating prior knowledge. In this paper, we propose a TAG that can systematically generate models ranging from FIRs to polynomial NARMAX models. Furthermore, we demonstrate that TAGs can be easily extended to more general model classes, such as the non-linear Box-Jenkins model class, enabling the realization of flexible and automatic model structure and complexity selection via EA.

eess.SY↗

arXiv2020

A Comparison of LPV Gain Scheduling and Control Contraction Metrics for Nonlinear Control

Gain-scheduled control based on linear parameter-varying (LPV) models derived from local linearizations is a widespread nonlinear technique for tracking time-varying setpoints. Recently, a nonlinear control scheme based on Control Contraction Metrics (CCMs) has been developed to track arbitrary admissible trajectories. This paper presents a comparison study of these two approaches. We show that the CCM based approach is an extended gain-scheduled control scheme which achieves global reference-independent stability and performance through an exact control realization which integrates a series of local LPV controllers on a particular path between the current and reference states.

eess.SY↗

arXiv2020

SMOKE: Single-Stage Monocular 3D Object Detection via Keypoint Estimation

Estimating 3D orientation and translation of objects is essential for infrastructure-less autonomous navigation and driving. In case of monocular vision, successful methods have been mainly based on two ingredients: (i) a network generating 2D region proposals, (ii) a R-CNN structure predicting 3D object pose by utilizing the acquired regions of interest. We argue that the 2D detection network is redundant and introduces non-negligible noise for 3D detection. Hence, we propose a novel 3D object detection method, named SMOKE, in this paper that predicts a 3D bounding box for each detected object by combining a single keypoint estimate with regressed 3D variables. As a second contribution, we propose a multi-step disentangling approach for constructing the 3D bounding box, which significantly improves both training convergence and detection accuracy. In contrast to previous 3D detection techniques, our method does not require complicated pre/post-processing, extra data, and a refinement stage. Despite of its structural simplicity, our proposed SMOKE network outperforms all existing monocular 3D detection methods on the KITTI dataset, giving the best state-of-the-art result on both 3D object detection and Bird's eye view evaluation. The code will be made publicly available.

cs.CV↗

arXiv2019

Heterogeneously parameterized tube model predictive control for LPV systems

This paper presents a heterogeneously parameterized tube-based model predictive control (MPC) design applicable to linear parameter-varying (LPV) systems. In a heterogeneous tube, the parameterizations of the tube cross sections and the associated control laws are allowed to vary along the prediction horizon. Two extreme cases that can be described in this framework are scenario MPC (high complexity, larger domain of attraction) and homothetic tube MPC with a simple time-invariant control parameterization (low complexity, smaller domain of attraction). In the proposed framework, these extreme parameterizations, as well as other parameterizations of intermediate complexity, can be combined within a single tube. By allowing for more flexibility in the parameterization design, one can influence the trade-off between computational cost and the size of the domain of attraction. Sufficient conditions on the parameterization structure are developed under which recursive feasibility and closed-loop stability are guaranteed. A specific parameterization that combines the principles of scenario and homothetic tube MPC is proposed and it is shown to satisfy the required conditions. The properties of the approach, including its capability of achieving improved complexity/performance trade-offs, are demonstrated using two numerical examples.

eess.SY↗

arXiv2019

Data-driven Modelling of Dynamical Systems Using Tree Adjoining Grammar and Genetic Programming

State-of-the-art methods for data-driven modelling of non-linear dynamical systems typically involve interactions with an expert user. In order to partially automate the process of modelling physical systems from data, many EA-based approaches have been proposed for model-structure selection, with special focus on non-linear systems. Recently, an approach for data-driven modelling of non-linear dynamical systems using Genetic Programming (GP) was proposed. The novelty of the method was the modelling of noise and the use of Tree Adjoining Grammar to shape the search-space explored by GP. In this paper, we report results achieved by the proposed method on three case studies. Each of the case studies considered here is based on real physical systems. The case studies pose a variety of challenges. In particular, these challenges range over varying amounts of prior knowledge of the true system, amount of data available, the complexity of the dynamics of the system, and the nature of non-linearities in the system. Based on the results achieved for the case studies, we critically analyse the performance of the proposed method.

eess.SY↗

arXiv2018

Grammar-based Representation and Identification of Dynamical Systems

In this paper we propose a novel approach to identify dynamical systems. The method estimates the model structure and the parameters of the model simultaneously, automating the critical decisions involved in identification such as model structure and complexity selection. In order to solve the combined model structure and model parameter estimation problem, a new representation of dynamical systems is proposed. The proposed representation is based on Tree Adjoining Grammar, a formalism that was developed from linguistic considerations. Using the proposed representation, the identification problem can be interpreted as a multi-objective optimization problem and we propose a Evolutionary Algorithm-based approach to solve the problem. A benchmark example is used to demonstrate the proposed approach. The results were found to be comparable to that obtained by state-of-the-art non-linear system identification methods, without making use of knowledge of the system description.

eess.SY↗

arXiv2018

On the Simulation of Polynomial NARMAX Models

In this paper, we show that the common approach for simulation non-linear stochastic models, commonly used in system identification, via setting the noise contributions to zero results in a biased response. We also demonstrate that to achieve unbiased simulation of finite order NARMAX models, in general, we require infinite order simulation models. The main contributions of the paper are two-fold. Firstly, an alternate representation of polynomial NARMAX models, based on Hermite polynomials, is proposed. The proposed representation provides a convenient way to translate a polynomial NARMAX model to a corresponding simulation model by simply setting certain terms to zero. This translation is exact when the simulation model can be written as an NFIR model. Secondly, a parameterized approximation method is proposed to curtail infinite order simulation models to a finite order. The proposed approximation can be viewed as a trade-off between the conventional approach of setting noise contributions to zero and the approach of incorporating the bias introduced by higher-order moments of the noise distribution. Simulation studies are provided to illustrate the utility of the proposed representation and approximation method.

eess.SY↗

arXiv2018

From Nonlinear Identification to Linear Parameter Varying Models: Benchmark Examples

Linear parameter-varying (LPV) models form a powerful model class to analyze and control a (nonlinear) system of interest. Identifying a LPV model of a nonlinear system can be challenging due to the difficulty of selecting the scheduling variable(s) a priori, which is quite challenging in case a first principles based understanding of the system is unavailable. This paper presents a systematic LPV embedding approach starting from nonlinear fractional representation models. A nonlinear system is identified first using a nonlinear block-oriented linear fractional representation (LFR) model. This nonlinear LFR model class is embedded into the LPV model class by factorization of the static nonlinear block present in the model. As a result of the factorization a LPV-LFR or a LPV state-space model with an affine dependency results. This approach facilitates the selection of the scheduling variable from a data-driven perspective. Furthermore the estimation is not affected by measurement noise on the scheduling variables, which is often left untreated by LPV model identification methods. The proposed approach is illustrated on two well-established nonlinear modeling benchmark examples.

eess.SY↗

arXiv2018

Linear Parameter Varying Representation of a class of MIMO Nonlinear Systems

Linear parameter-varying (LPV) models form a powerful model class to analyze and control a (nonlinear) system of interest. Identifying an LPV model of a nonlinear system can be challenging due to the difficulty of selecting the scheduling variable(s) a priori, especially if a first principles based understanding of the system is unavailable. Converting a nonlinear model to an LPV form is also non-trivial and requires systematic methods to automate the process. Inspired by these challenges, a systematic LPV embedding approach starting from multiple-input multiple-output (MIMO) linear fractional representations with a nonlinear feedback block (NLFR) is proposed. This NLFR model class is embedded into the LPV model class by an automated factorization of the (possibly MIMO) static nonlinear block present in the model. As a result of the factorization, an LPV-LFR or an LPV state-space model with affine dependency on the scheduling is obtained. This approach facilitates the selection of the scheduling variable and the connected mapping of system variables. Such a conversion method enables to use nonlinear identification tools to estimate LPV models. The potential of the proposed approach is illustrated on a 2-DOF nonlinear mass-spring-damper example.

eess.SY↗

arXiv2018

Towards Efficient Maximum Likelihood Estimation of LPV-SS Models

How to efficiently identify multiple-input multiple-output (MIMO) linear parameter-varying (LPV) discrete-time state-space (SS) models with affine dependence on the scheduling variable still remains an open question, as identification methods proposed in the literature suffer heavily from the curse of dimensionality and/or depend on over-restrictive approximations of the measured signal behaviors. However, obtaining an SS model of the targeted system is crucial for many LPV control synthesis methods, as these synthesis tools are almost exclusively formulated for the aforementioned representation of the system dynamics. Therefore, in this paper, we tackle the problem by combining state-of-the-art LPV input-output (IO) identification methods with an LPV-IO to LPV-SS realization scheme and a maximum likelihood refinement step. The resulting modular LPV-SS identification approach achieves statical efficiency with a relatively low computational load. The method contains the following three steps: 1) estimation of the Markov coefficient sequence of the underlying system using correlation analysis or Bayesian impulse response estimation, then 2) LPV-SS realization of the estimated coefficients by using a basis reduced Ho-Kalman method, and 3) refinement of the LPV-SS model estimate from a maximum-likelihood point of view by a gradient-based or an expectation-maximization optimization methodology. The effectiveness of the full identification scheme is demonstrated by a Monte Carlo study where our proposed method is compared to existing schemes for identifying a MIMO LPV system.

eess.SY↗

arXiv2018

Affine Parameter-Dependent Lyapunov Functions for LPV Systems with Affine Dependence

This paper deals with the certification problem for robust quadratic stability, robust state convergence, and robust quadratic performance of linear systems that exhibit bounded rates of variation in their parameters. We consider both continuous-time (CT) and discrete-time (DT) parameter-varying systems. In this paper, we provide a uniform method for this certification problem in both cases and we show that, contrary to what was claimed previously, the DT case requires a significantly different treatment compared to the existing CT results. In the established uniform approach, quadratic Lyapunov functions, that are affine in the parameter, are used to certify robust stability, robust convergence rates, and robust performance in terms of linear matrix inequality feasibility tests. To exemplify the procedure, we solve the certification problem for $\mathscr{L}_2$-gain performance both in the CT and the DT cases. A numerical example is given to show that the proposed approach is less conservative than a method with slack variables.

eess.SY↗

arXiv2017

Stabilizing Tube-Based Model Predictive Control: Terminal Set and Cost Construction for LPV Systems (extended version)

This paper presents a stabilizing tube-based MPC synthesis for LPV systems. We employ terminal constraint sets which are required to be controlled periodically contractive. Periodically (or finite-step) contractive sets are easier to compute and can be of lower complexity than "true" contractive ones, lowering the required computational effort both off-line and on-line. Under certain assumptions on the tube parameterization, recursive feasibility of the scheme is proven. Subsequently, asymptotic stability of the origin is guaranteed through the construction of a suitable terminal cost based on a novel Lyapunov-like metric for compact convex sets containing the origin. A periodic variant on the well-known homothetic tube parameterization that satisfies the necessary assumptions and yields a tractable LPV MPC algorithm is derived. The resulting MPC algorithm requires the on-line solution of a single linear program with linear complexity in the prediction horizon. The properties of the approach are demonstrated by a numerical example.

eess.SY↗

arXiv2017

Realization Theory for LPV State-Space Representations with Affine Dependence

In this paper we present a Kalman-style realization theory for linear parameter-varying state-space representations whose matrices depend on the scheduling variables in an affine way (abbreviated as LPV-SSA representations). We deal both with the discrete-time and the continuous-time cases. We show that such a LPV-SSA representation is a minimal (in the sense of having the least number of state-variables) representation of its input-output function, if and only if it is observable and span-reachable. We show that any two minimal LPV-SSA representations of the same input-output function are related by a linear isomorphism, and the isomorphism does not depend on the scheduling variable.We show that an input-output function can be represented by a LPV-SSA representation if and only if the Hankel-matrix of the input-output function has a finite rank. In fact, the rank of the Hankel-matrix gives the dimension of a minimal LPV-SSA representation. Moreover, we can formulate a counterpart of partial realization theory for LPV-SSA representation and prove correctness of the Kalman-Ho algorithm. These results thus represent the basis of systems theory for LPV-SSA representation.

math.OC↗

arXiv2016

On the Connection Between Different Noise Structures for LPV-SS Models

Different representations to describe noise processes and finding connections or equivalence between them have been part of active research for decades, in particular for linear time-invariant case. In this paper the linear parameter-varying (LPV) setting is addressed; starting with the connection between an LPV state-space (SS) representation with a general noise structure and the LPV-SS model in an innovation structure, i.e., the Kalman filter. More specifically, the considered LPV-SS representation with general noise structure has static, affine dependence on the scheduling signal; however, we show that its companion innovation structure has a dynamic, rational dependency structure. Following, we would like to highlight the consequences of approximating this Kalman gain by a static, affine dependency structure. To this end, firstly, we use the "fading memory" effect of the Kalman filter to reason how the Kalman gain can be approximated to depend only on a partial trajectory of the scheduling signal. This effect is shown by proving an asymptotically decreasing error upper bound on the covariance matrix associated to the innovation structure in case the covariance matrix is subjected to an incorrect initialization or disturbance. Secondly, we show by an example that an LPV-SS representation that has dynamical, rational dependency on the scheduling signal can be transformed into static, affinely dependent representation by introducing additional states. Therefore, an approximated Kalman gain can, in some cases, be represented by a static, affine Kalman gain at the cost of additional states.

eess.SY↗