arXiv subjects

Rolando Saniz

Publications and source records attributed to Rolando Saniz.

13 recordsLinked to original sources

arXiv2023

Charge localization, frustration relief, and spin-orbit coupling in U$_3$O$_8$

Research efforts on the low temperature magnetic order and electronic properties of U$_3$O$_8$ have been inconclusive so far. Reinterpreting neutron scattering results, we use group representation theory to show that the ground state presents collinear out-of-plane magnetic moments, with antiferromagnetic coupling both in-layer and between layers. Charge localization relieves the initial geometric frustration, generating a slightly distorted honeycomb sublattice with Néel order. We show, furthermore, that spin-orbit coupling has a giant effect on the conduction band states and band gap value. Our results allow a reinterpretation of recent optical absorption measurements.

cond-mat.str-el↗

arXiv2018

Nature of the positron state in CdSe quantum dots

Previous studies have shown that positron-annihilation spectroscopy is a highly sensitive probe of the electronic structure and surface composition of ligand-capped semiconductor Quantum Dots (QDs) embedded in thin films. Nature of the associated positron state, however, whether the positron is confined inside the QDs or localized at their surfaces, has so far remained unresolved. Our positron-annihilation lifetime spectroscopy (PALS) studies of CdSe QDs reveal the presence of a strong lifetime component in the narrow range of 358-371 ps, indicating abundant trapping and annihilation of positrons at the surfaces of the QDs. Furthermore, our ab-initio calculations of the positron wave function and lifetime employing a recent formulation of the Weighted Density Approximation (WDA) demonstrate the presence of a positron surface state and predict positron lifetimes close to experimental values. Our study thus resolves the longstanding question regarding the nature of the positron state in semiconductor QDs, and opens the way to extract quantitative information on surface composition and ligand-surface interactions of colloidal semiconductor QDs through highly sensitive positron-annihilation techniques.

cond-mat.mes-hall↗

arXiv2018

Crystalline topological states at a topological insulator junction

We consider an interface between two strong time-reversal invariant topological insulators having surface states with opposite spin chirality, or equivalently, opposite mirror Chern number. We show that such an interface supports gapless modes that are protected by mirror symmetry. The interface states are investigated with a continuum model for the Bi2Se3 class of topological insulators that takes into account terms up to third order in the crystal momentum, which ensures that the model has the correct symmetry. The model parameters are obtained from ab initio calculations. Finally, we consider the effect of rotational mismatch at the interface, which breaks the mirror symmetry and opens a gap in the interface spectrum.

cond-mat.mes-hall↗

arXiv2017

Exceeding the Shockley-Queisser limit within the detailed balance framework

The Shockley-Queisser limit is one of the most fundamental results in the field of photovoltaics. Based on the principle of detailed balance, it defines an upper limit for a single junction solar cell that uses an absorber material with a specific band gap. Although methods exist that allow a solar cell to exceed the Shockley-Queisser limit, here we show that it is possible to exceed the Shockley-Queisser limit without considering any of these additions. Merely by introducing an absorptivity that does not assume that every photon with an energy above the band gap is absorbed, efficiencies above the Shockley-Queisser limit are obtained. This is related to the fact that assuming optimal absorption properties also maximizes the recombination current within the detailed balance approach. We conclude that considering a finite thickness for the absorber layer allows the efficiency to exceed the Shockley-Queisser limit, and that this is more likely to occur for materials with small band gaps.

cond-mat.mtrl-sci↗

arXiv2017

Doping anatase TiO2 with group V-b and VI-b transition metal atoms: a hybrid functional first-principles study

We investigate the role of transition metal atoms of group V-b (V, Nb, and Ta) and VI-b (Cr, Mo, and W) as n- or p-type dopants in anatase TiO2 using thermodynamic principles and density functional theory with the Heyd-Scuseria-Ernzerhof HSE06 hybrid functional. The HSE06 functional provides a realistic value for the band gap, which ensures a correct classification of dopants as shallow or deep donors or acceptors. Defect formation energies and thermodynamic transition levels are calculated taking into account the constraints imposed by the stability of TiO2 and the solubility limit of the impurities. Nb, Ta, W and Mo are identified as shallow donors. Although W provides two electrons, Nb and Ta show a considerably lower formation energy, in particular under O-poor conditions. Mo donates in principle one electron, but under specific conditions can turn into a double donor. V impurities are deep donors and Cr shows up as an amphoteric defect, thereby acting as an electron trapping center in n-type TiO2 especially under O-rich conditions. A comparison with the available experimental data yields excellent agreement.

cond-mat.mtrl-sci↗

arXiv2016

Superconductivity in CuCl/Si: possible excitonic pairing?

The search for superconductivity with higher transition temperature ($T_C$) has long been a challenge in research efforts ever since its first discovery in 1911. The effort has led to the discovery of various kinds of superconductors and progress in the understanding of this intriguing phenomenon. The increase of $T_C$ has also evolved; however, the dream of realizing room-temperature superconductivity is far from reality. For superconductivity to emerge, the effective quasiparticle interaction should overcome the repulsive Coulomb interaction. This can be realized via lattice or spin degrees of freedom. An alternative pairing mechanism, the excitonic mechanism, was proposed 50 years ago, hoping to achieve higher $T_C$ than by phonon mediation. As none of physics principles has ever prevented excitonic pairing, the excitonic pairing mechanism is revisited here and we show that the effective quasiparticle interaction without lattice and spin can be attractive solely electronically.

cond-mat.supr-con↗

arXiv2016

Positron surface state as a spectroscopic probe for characterizing surfaces of topological insulator materials

Topological insulators are attracting considerable interest due to their potential for technological applications and as platforms for exploring wide-ranging fundamental science questions. In order to exploit, fine-tune, control and manipulate the topological surface states, spectroscopic tools which can effectively probe their properties are of key importance. Here, we demonstrate that positrons provide a sensitive probe for topological states, and that the associated annihilation spectrum provides a new technique for characterizing these states. Firm experimental evidence for the existence of a positron surface state near Bi$_2$Te$_2$Se with a binding energy of $E_b = 2.7 \pm 0.2 \, \text{eV}$ is presented, and is confirmed by first-principles calculations. Additionally, the simulations predict a significant signal originating from annihilation with the topological surface states and shows the feasibility to detect their spin-texture through the use of spin-polarized positron beams.

cond-mat.mtrl-sci↗

arXiv2016

First-principles analysis of the efficiency of photovoltaic layers for CuAu-like chalcogenides and silicon

Chalcopyrite semiconductors are of considerable interest for application as absorber layers in thin-film photovoltaic cells. When growing films of these compounds, however, they are often found to contain CuAu- like domains, a metastable phase of chalcopyrite. It has been reported that for CuInS2, the presence of the CuAu-like phase improves the short circuit current of the chalcopyrite-based photovoltaic cell. We investigate the thermodynamic stability of both phases for a selected list of I-III-VI2 materials using a first-principles density functional theory approach. For the CuIn-VI2 compounds, the difference in formation energy between the chalcopyrite and CuAu-like phase is found to be close to 2 meV/atom, indicating a high likelihood of the presence of CuAu-like domains. Next, we calculate the Spectroscopic Limited Maximum Efficiency (SLME) of the CuAu- like phase and compare the results with those of the corresponding chalcopyrite phase. We identify several candidates with a high efficiency, such as CuAu-like CuInS2, for which we obtain an SLME of 29% at a thickness of 500 nm. We observe that the SLME can have values above the Shockley-Queisser (SQ) limit, and show that this can occur because the SQ limit assumes the absorptivity to be a step function, thus overestimating the radiative recombination in the detailed balance approach. This means that it is possible to find higher theoretical efficiencies within this framework simply by calculating the J-V characteristic with an absorption spectrum. Finally, we expand our SLME analysis to indirect band gap absorbers by studying silicon, and find that the SLME quickly overestimates the reverse saturation current of indirect band gap materials, drastically lowering their calculated efficiency.

cond-mat.mtrl-sci↗

arXiv2016

First-principles study of the optoelectronic properties and photovoltaic absorber layer efficiency of Cu-based chalcogenides

Cu-based chalcogenides are promising materials for thin-film solar cells with more than 20% measured cell efficiency. Using first-principles calculations based on density functional theory, the optoelectronic properties of a group of Cu-based chalcogenides Cu$_2$-II-IV-VI$_4$ is studied. They are then screened with the aim of identifying potential absorber materials for photovoltaic applications. The spectroscopic limited maximum efficiency (SLME) introduced by Yu and Zunger is used as a metric for the screening. After constructing the current-voltage curve, the maximum spectroscopy dependent power conversion efficiency is calculated from the maximum power output. The role of the nature of the band gap, direct or indirect, and also of the absorptivity of the studied materials on the maximum theoretical power conversion efficiency is studied. Our results show that Cu$_2$-II-GeSe$_4$ with II=Cd and Hg, and Cu$_2$-II-SnS$_4$ with II=Cd and Zn have a higher theoretical efficiency compared to the materials currently used as absorber layer.

cond-mat.mtrl-sci↗

arXiv2016

Easily doped p-type, low hole effective mass, transparent oxides

Fulfillment of the promise of transparent electronics has been hindered until now largely by the lack of semiconductors that can be doped p-type in a stable way, and that at the same time present high hole mobility and are highly transparent in the visible spectrum. Here, a high-throughput study based on first-principles methods reveals four oxides, namely X2SeO2, with X = La, Pr, Nd, and Gd, which are unique in that they exhibit excellent characteristics for transparent electronic device applications-i.e., a direct band gap larger than 3.1 eV, an average hole effective mass below the electron rest mass, and good p-type dopability. Furthermore, for La2SeO2 it is explicitly shown that Na impurities substituting La are shallow acceptors in moderate to strong anion-rich growth conditions, with low formation energy, and that they will not be compensated by anion vacancies VO or VSe.

cond-mat.mtrl-sci↗

arXiv2014

First-principles study of carbon impurities in CuIn$_{1-x}$Ga$_x$Se$_{2}$, present in nonvacuum synthesis methods

A first-principles study of the structural and electronic properies of carbon impurities in CuIn$_{1-x}$Ga$_x$Se$_{2}$ is presented. Carbon is present in organic molecules in the precursor solutions used in nonvacuum growth methods, making more efficient use of material, time and energy than traditional vacuum methods. The formation energies of several carbon impurities are calculated using the hybrid HSE06 functional. C$_{\mathrm{Cu}}$ acts as a shallow donor, C$_{\mathrm{In}}$ and interstitial C yield deep donor levels in CuInSe$_{2}$, while in CuGaSe$_{2}$ C$_{\mathrm{Ga}}$ and interstitial C act as deep amphoteric defects. So, if present, these defects reduce the majority carrier (hole) concentration by compensating the acceptor levels and become trap states for the photogenerated minority carriers (electrons). However, the formation energies of the calculated carbon impurities are high, even under C-rich growth conditions. Therefore, these impurities are not likely to form and will probably be expelled to the intergranular region and out of the absorber layer.

cond-mat.mes-hall↗

arXiv2014

Native point defects in CuIn$_{1-x}$Ga$_x$Se$_{2}$: hybrid density functional calculations predict origin of p- and n-type conductivity

We have performed a first-principles study of the p- and n-type conductivity in CuIn$_{1-x}$Ga$_x$Se$_{2}$ due to native point defects, based on the HSE06 hybrid functional. Band alignment shows that the band gap becomes larger with $x$ due to the increasing conduction band minimum, rendering it hard to establish n-type conductivity in CuGaSe$_{2}$. From the defect formation energies, we find that In/Ga$_{\mathrm{Cu}}$ is a shallow donor, while V$_{\mathrm{Cu}}$, V$_{\mathrm{In}/\mathrm{Ga}}$ and Cu$_{\mathrm{In}/\mathrm{Ga}}$ act as shallow acceptors. Using total charge neutrality of ionized defects and intrinsic charge carriers to determine the Fermi level, we show that under In-rich growth conditions In$_{\mathrm{Cu}}$ causes strongly n-type conductivity in CuInSe$_{2}$. Under In-poor growth conditions the conductivity type in CuInSe$_{2}$ alters to p-type and compensation of the acceptors by In$_{\mathrm{Cu}}$ reduces, as observed in photoluminescence experiments. In CuGaSe$_{2}$, the native acceptors pin the Fermi level far away from the conduction band minimum, thus inhibiting n-type conductivity. On the other hand, CuGaSe$_{2}$ shows strong p-type conductivity under a wide range of Ga-poor growth conditions. Maximal p-type conductivity in CuIn$_{1-x}$Ga$_x$Se$_{2}$ is reached under In/Ga-poor growth conditions, in agreement with charge concentration measurements on samples with In/Ga-poor stoichiometry, and is primarily due to the dominant acceptor Cu$_{\mathrm{In}/\mathrm{Ga}}$.

cond-mat.mes-hall↗

arXiv2012

Attracting shallow donors: Hydrogen passivation in (Al,Ga,In)-doped ZnO

The hydrogen interstitial and the substitutional Al_Zn, Ga_Zn and In_Zn are all shallow donors in ZnO and lead to n-type conductivity. Although shallow donors are expected to repel each other, we show by first principles calculations that in ZnO these shallow donor impurities attract and form a complex, leading to a donor level deep in the band gap. This puts a limit on the n-type conductivity of (Al,Ga,In)-doped ZnO in the presence of hydrogen.

cond-mat.mtrl-sci↗