SearcharxivSearch

arXiv subjects

Roman Anufriev

Publications and source records attributed to Roman Anufriev.

12 recordsLinked to original sources

Enhancement of far-field thermal emission via polaritonic cavity modes

Controlling thermal emission is crucial for applications involving thermophotovoltaics, thermal sensing, imaging, and camouflage. While prior studies focused on the emission of thermally excited guided modes (TEGMs) inside cavities, their contribution to the far-field radiation outside cavities has remained unexplored. Here, we demonstrate a tunable far-field thermal channel enabled by TEGMs arising from the coupling of surface phonon-polaritons and cavity resonances. By combining infrared emissivity experiments with fluctuational electrodynamics simulations, we identify distinct spectral features marking the conversion of two-dimensionally confined polaritonic modes into three-dimensional radiative channels. We find that silicon cavities covered with SiO2 enhance the emissivity by up to 200% near the polaritonic spectral resonance, whereas bare silicon cavities yield only broadband enhancement. These findings provide experimental evidence of TEGMs and establish a simple cavity architecture as an effective and scalable platform for tailoring thermal radiation without complex nanofabrication.

cond-mat.mes-hall

Enhanced Near-Field Thermal Radiation Driven by Multiple Corner and Edge Modes in Subwavelength Square Nanowires

We demonstrate that the near-field thermal radiation between subwavelength SiC nanowires with square cross sections is dominated by multiple corner and edge resonances rather than the single surface-phonon-polariton channel of planar surfaces. Fluctuational electrodynamics simulations reveal that these resonances lie within the SiC Reststrahlen band, redshift for thinner nanowires, and yield a four-fold enhancement of thermal conductance. This maximum enhancement occurs when the separation gap nearly matches the nanowire thickness, balancing dimensional confinement and interwire coupling. These findings establish square nanowires as a versatile platform for geometrycontrolled near-field heat transfer in nanoscale heat management and energy conversion.

cond-mat.mes-hall

Ultra-High-Temperature Vacuum Prober for Electrical and Thermal Measurements

We develop an ultra-high-temperature vacuum probe station (UHT-VPS) featuring a sample holder heated by thermal radiation from a silicon carbide heater. This contactless configuration electrically isolates the sample from the high-power heating source through a vacuum gap, ensuring reliable measurements under extreme conditions. The capability of this UHT-VPS to measure electrical signals from 30 nV upward on bulk sapphire is demonstrated using the 3w/2w method. Measurements are continuously operated from 300 to 1150 K, under high vacuum, for a total of about 66 hours without readjusting the contact. They yield the linear and quadratic temperature coefficients of resistance of chromium/platinum micro-resistances, as well as the sapphire's thermal conductivity and thermal diffusivity. By recording the heater and sensor temperature signals up to 30 kHz and fitting them with theoretical models that account for the quadratic TCR of Cr/Pt microwires, we obtain values in agreement with literature data obtained by optical methods. In this temperature range, we also measure thermal conductivity, which cannot be directly accessed by optical techniques. Our system thus provides an effective solution for simultaneously retrieving the electrical and thermal properties of materials using a single set of 3w/2w data up to unprecedented temperature levels.

physics.ins-det

Hypersonic acoustic wave control via hyperuniform phononic nanostructures

Controlling hypersonic surface acoustic waves is crucial for advanced phononic devices such as high-frequency filters, sensors, and quantum computing components. While periodic phononic crystals enable precise bandgap engineering, their ability to suppress acoustic waves is limited to specific frequency ranges. Here, we experimentally demonstrate the control of surface acoustic waves using a hyperuniform arrangement of gold nanopillars on a lithium niobate layer. The hyperuniform structure exhibits characteristics of both random and ordered systems, leading to an overall reduction in acoustic transmission and the formation of bandgap-like regions where phonon propagation is strongly suppressed. We further demonstrate effective waveguiding by incorporating linear and S-shaped waveguides into the hyperuniform pattern. Both simulations and experiments confirm high transmission through the waveguides at frequencies within the bandgaps, demonstrating the flexibility of hyperuniform structures to support waveguides of complex shapes. These findings provide a novel approach to overcoming the limitations of traditional phononic crystals and advancing acoustic technologies in applications such as mechanical quantum computing and smartphone filters.

cond-mat.mes-hall

Phonon dispersion of nanoscale honeycomb phononic crystal: gigahertz and terahertz spectroscopy comparison

Phonons-quantized vibrational modes in crystalline structures-govern phenomena ranging from thermal and mechanical transport to quantum mechanics. In recent years, a new class of artificial materials called phononic crystals has emerged, aiming to control phononic properties. These materials are created by introducing a superlattice structure on top of an already-existing atomic lattice. Typically, phononic crystals are described using a continuous model, in which effective elastic constants approximate potentials between atoms. This approximation, however, assumes the wavelengths of vibrations to be significantly greater than the interatomic distance. In this work, we experimentally investigate the behavior of a honeycomb silicon phononic crystal in the gigahertz range, where the continuum approximation holds, and in the terahertz range, where the phonon wavelengths are comparable to interatomic distances. Using Brillouin light scattering, we investigate the phonon dispersion of the phononic crystal in the gigahertz range, finding a close match with simulations based on the continuous model. Conversely, Raman spectroscopy reveals no difference between the phononic crystal, an unpatterned membrane, and a bulk silicon structure in the terahertz range, showing that the continuous model no longer holds at these higher frequencies.

cond-mat.mes-hall

Polaritonic Waveguide Emits Super-Planckian Thermal Radiation

Classical Planck's theory of thermal radiation predicts an upper limit of the heat transfer between two bodies separated by a distance longer than the dominant radiation wavelength (far-field regime). This limit can be overcome when the dimensions of the absorbent bodies are smaller than the dominant wavelength due to hybrid electromagnetic waves, known as surface phonon-polaritons (SPhPs). Here, we experimentally demonstrate that the far-field radiative heat transfer between two non-absorbent bodies can also overcome Planck's limit, by coating them with an absorbent material to form a polaritonic waveguide. This super-Planckian far-field thermal radiation is confirmed by measuring the radiative thermal conductance between two silicon plates coated with silicon dioxide nanolayers. The observed conductance is twice higher than Planck's limit and agrees with the predictions of our model for the SPhP waveguide modes. Our findings could be applied to thermal management in microelectronics and silicon photonics.

physics.optics

Observation of quasi-ballistic thermal transport of surface phonon-polaritons over hundreds of micrometres

Long-distance propagation of heat carriers is essential for efficient heat dissipation in microelectronics. However, in dielectric nanomaterials, the primary heat carriers - phonons - can propagate ballistically only for hundreds of nanometres, which limits their heat conduction efficiency. Theory predicts that surface phonon-polaritons (SPhPs) can overcome this limitation and conduct heat without dissipation for hundreds of micrometres. In this work, we experimentally demonstrate such long-distance heat transport by SPhPs. Using the 3$ω$ technique, we measure the in-plane thermal conductivity of SiN nanomembranes for different heater-sensor distances (100 and 200 $μ$m), membrane thicknesses (30 - 200 nm), and temperatures (300 - 400 K). We find that in contrast with thick membranes, thin nanomembranes support heat conduction by SPhPs, as evidenced by an increase in the thermal conductivity with temperature. Remarkably, the thermal conductivity measured 200 $μ$m away from the heater are consistently higher than that measured 100 $μ$m closer. This result suggests that heat conduction by SPhPs is quasi-ballistic over at least hundreds of micrometres. Thus, our findings show that SPhPs can enhance heat dissipation in polar nanomembranes and find applications in thermal management, near-field radiation, and polaritonics.

cond-mat.mes-hall

Surface phonon-polaritons enhance thermal conduction in SiN nanomembranes

Surface phonon-polaritons can carry energy on the surface of dielectric films and thus are expected to contribute to heat conduction. However, the contribution of surface phonon-polaritons (SPhPs) to thermal transport has not been experimentally demonstrated yet. In this work, we experimentally measure the effective in-plane thermal conductivity of amorphous silicon nitride membrane and show that it can indeed be increased by SPhPs significantly when the membrane thickness scales down. In particular, by heating up a thin membrane (<100 nm) from 300 to 800 K, the thermal conductivity increases twice due to SPhPs contribution.

cond-mat.mes-hall

Quasi-ballistic heat conduction due to Lévy phonon flights in silicon nanowires

Future of silicon-based microelectronics relies on solving the heat dissipation problem. A solution may lie in a nanoscale phenomenon known as ballistic heat conduction, which implies heat conduction without heating the conductor. But, attempts to demonstrate this phenomenon experimentally are controversial and scarce whereas its mechanism in confined nanostructures is yet to be fully understood. Here, we experimentally demonstrate quasi-ballistic heat conduction in silicon nanowires (NWs). We show that the ballisticity is strongest in short NWs at low temperatures but weakens as the NW length or temperature is increased. Yet, even at room temperature, quasi-ballistic heat conduction remains visible in short NWs. To better understand this phenomenon, we probe directionality and lengths of phonon flights. Our experiments and simulations show that the quasi-ballistic phonon transport in NWs is the Lévy walk with short flights between the NW boundaries and long ballistic leaps along the NW.

cond-mat.mes-hall

Heat guiding and focusing using ballistic phonon transport in phononic nanostructures

Unlike classical heat diffusion at the macroscale, nanoscale heat transport can occur without energy dissipation because phonons can travel in straight lines for hundreds of nanometres. Despite recent experimental evidence of such ballistic phonon transport, control over its directionality, and thus its practical use, remains a challenge, as the directions of individual phonons are chaotic. Here, we show a way to control the directionality of ballistic phonon transport using silicon thin-films with arrays of holes. First, we demonstrate the formation of directional heat fluxes in the passages between the holes. Next, we use these nanostructures as a directional source of ballistic phonons and couple the emitted phonons into nanowires. Finally, we introduce a nanoscale thermal lens in which the phonons converge at a focal point, thus focusing heat into a spot of a few hundred nanometres. These results provide a basis for ray-like heat manipulations that enable nanoscale heat guiding, dissipation, localization, confinement and rectification.

cond-mat.mes-hall

Heat conduction tuning using the wave nature of phonons

The world communicates to our senses of vision, hearing and touch in the language of waves, as the light, sound, and even heat essentially consist of microscopic vibrations of different media. The wave nature of light and sound has been extensively investigated over the past century and is now widely used in modern technology. But the wave nature of heat has been the subject of mostly theoretical studies, as its experimental demonstration, let alone practical use, remains challenging due to the extremely short wavelengths of these waves. Here we show a possibility to use the wave nature of heat for thermal conductivity tuning via spatial short-range order in phononic crystal nanostructures. Our experimental and theoretical results suggest that interference of thermal phonons occurs in strictly periodic nanostructures and slows the propagation of heat. This finding broadens the methodology of heat transfer engineering by expanding its territory to the wave nature of heat.

cond-mat.mes-hall

Reduction of thermal conductance by coherent phonon scattering in two-dimensional phononic crystals of different lattice types

The impact of lattice type, period, porosity and thickness of two-dimensional silicon phononic crystals on the reduction of thermal conductance by coherent modification of phonon dispersion is investigated using the theory of elasticity and finite element method. Increase in the period and porosity of the phononic crystal affects the group velocity and phonon density of states and, as a consequence, reduces the in-plane thermal conductance of the structure as compared to unpatterned membrane. This reduction does not depend significantly on the lattice type and thickness of phononic crystals. Moreover, the reduction is strongly temperature dependent and strengthens as the temperature is increased.

cond-mat.mes-hall