arXiv subjects

Roman Fasel

Publications and source records attributed to Roman Fasel.

At least 55 records · Page 3Linked to original sources

arXiv2021

Optimized Graphene Electrodes for contacting Graphene Nanoribbons

Atomically precise graphene nanoribbons are a promising emerging class of designer quantum materials with electronic properties that are tunable by chemical design. However, many challenges remain in the device integration of these materials, especially regarding contacting strategies. We report on the device integration of uniaxially aligned and non-aligned 9-atom wide armchair graphene nanoribbons (9-AGNRs) in a field-effect transistor geometry using electron beam lithography-defined graphene electrodes. This approach yields controlled electrode geometries and enables higher fabrication throughput compared to previous approaches using an electrical breakdown technique. Thermal annealing is found to be a crucial step for successful device operation resulting in electronic transport characteristics showing a strong gate dependence. Raman spectroscopy confirms the integrity of the graphene electrodes after patterning and of the GNRs after device integration. Our results demonstrate the importance of the GNR-graphene electrode interface and pave the way for GNR device integration with structurally well-defined electrodes.

cond-mat.mes-hall↗

arXiv2020

Coupled spin states in armchair graphene nanoribbons with asymmetric zigzag edge extensions

Carbon-based magnetic structures promise significantly longer coherence times than traditional magnetic materials, which is of fundamental importance for spintronic applications. An elegant way of achieving carbon-based magnetic moments is the design of graphene nanostructures with an imbalanced occupation of the two sublattices forming the carbon honeycomb lattice. According to Lieb's theorem, this induces local magnetic moments that are proportional to the sublattice imbalance. Exact positioning of sublattice imbalanced nanostructures in graphene nanomaterials hence offers a route to control interactions between induced local magnetic moments and to obtain graphene nanomaterials with magnetically non-trivial ground states. Here, we show that such sublattice imbalanced nanostructures can be incorporated along a large band gap armchair graphene nanoribbon on the basis of asymmetric zigzag edge extensions, which is achieved by incorporating specifically designed precursor monomers during the bottom-up fabrication of the graphene nanoribbons. Scanning tunneling spectroscopy of an isolated and electronically decoupled zigzag edge extension reveals Hubbard-split states in accordance with theoretical predictions. Investigation of pairs of such zigzag edge extensions reveals ferromagnetic, antiferromagnetic or quenching of the magnetic interactions depending on the relative alignment of the asymmetric edge extensions. Moreover, a ferromagnetic spin chain is demonstrated for a periodic pattern of zigzag edge extensions along the nanoribbon axis. This work opens a route towards the design and fabrication of graphene nanoribbon-based spin chains with complex magnetic ground states.

cond-mat.mes-hall↗

arXiv2020

Quantum Electronic Transport Across "Bite" Defects in Graphene Nanoribbons

On-surface synthesis has recently emerged as an effective route towards the atomically precise fabrication of graphene nanoribbons of controlled topologies and widths. However, whether and to which degree structural disorder occurs in the resulting samples is a crucial issue for prospective applications that remains to be explored. Here, we experimentally identify missing benzene rings at the edges, which we name "bite" defects, as the most abundant type of disorder in armchair nanoribbons synthesized by the bottom-up approach. First, we address their density and spatial distribution on the basis of scanning tunnelling microscopy and find that they exhibit a strong tendency to aggregate. Next, we explore their effect on the quantum charge transport from first-principles calculations, revealing that such imperfections substantially disrupt the conduction properties at the band edges. Finally, we generalize our theoretical findings to wider nanoribbons in a systematic manner, hence establishing practical guidelines to minimize the detrimental role of such defects on the charge transport. Overall, our work portrays a detailed picture of "bite" defects in bottom-up armchair graphene nanoribbons and assesses their effect on the performance of carbon-based nanoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2020

Giant magnetic exchange coupling in rhombus-shaped nanographenes with zigzag periphery

Nanographenes with zigzag edges are predicted to manifest non-trivial pi-magnetism resulting from the interplay of hybridization of localized frontier states and Coulomb repulsion between valence electrons. This provides a chemically tunable platform to explore quantum magnetism at the nanoscale and opens avenues toward organic spintronics. The magnetic stability in nanographenes is thus far limited by the weak magnetic exchange coupling which remains below the room temperature thermal energy. Here, we report the synthesis of large rhombus-shaped nanographenes with zigzag periphery on gold and copper surfaces. Single-molecule scanning probe measurements unveil an emergent magnetic spin-singlet ground state with increasing nanographene size. The magnetic exchange coupling in the largest nanographene, determined by inelastic electron tunneling spectroscopy, exceeds 100 meV or 1160 K, which outclasses most inorganic nanomaterials and remarkably survives on a metal electrode.

cond-mat.mes-hall↗

arXiv2020

Collective All-Carbon Magnetism in Triangulene Dimers

Triangular zigzag nanographenes, such as triangulene and its pi-extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high-spin networks with long-range magnetic order - of immense fundamental and technological relevance. As a first step toward these lines, we present the on-surface synthesis and a proof-of-principle experimental study of magnetism in covalently bonded triangulene dimers. On-surface reactions of rationally-designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4-phenylene spacer. The chemical structures of the dimers have been characterized by bond-resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet-triplet spin excitations in the dimers, demonstrating efficient inter-triangulene magnetic coupling.

cond-mat.mes-hall↗

arXiv2019

Controlled quantum dot formation in atomically engineered graphene nanoribbons field-effect transistors

Graphene nanoribbons (GNRs) have attracted a strong interest from researchers worldwide, as they constitute an emerging class of quantum-designed materials. The major challenges towards their exploitation in electronic applications include reliable contacting, complicated by their small size ($<$50 nm), as well as the preservation of their physical properties upon device integration. In this combined experimental and theoretical study, we report on the quantum dot (QD) behavior of atomically precise GNRs integrated in a device geometry. The devices consist of a film of aligned 5-atoms wide GNRs (5-AGNRs) transferred onto graphene electrodes with a sub 5-nm nanogap. We demonstrate that the narrow-bandgap 5-AGNRs exhibit metal-like behavior resulting in linear IV curves for low bias voltages at room temperature and single-electron transistor behavior for temperatures below 150~K. By performing spectroscopy of the molecular levels at 13~K, we obtain addition energies in the range of 200-300 meV. DFT calculations predict comparable addition energies and reveal the presence of two electronic states within the bandgap of infinite ribbons when the finite length of the 5-AGNRs is accounted for. By demonstrating the preservation of the 5-AGNRs electronic properties upon device integration, as demonstrated by transport spectroscopy, our study provides a critical step forward in the realisation of more exotic GNR-based nano-electronic devices.

cond-mat.mes-hall↗

arXiv2019

A Universal Length-Dependent Vibrational Mode in Graphene Nanoribbons

Graphene nanoribbons (GNRs) have attracted considerable interest as their atomically tunable structure makes them promising candidates for future electronic devices. However, obtaining detailed information about the length of GNRs has been challenging and typically relies on low-temperature scanning tunneling microscopy. Such methods are ill-suited for practical device application and characterization. In contrast, Raman spectroscopy is a sensitive method for the characterization of GNRs, in particular for investigating their width and structure. Here, we report on a length-dependent, Raman active low-energy vibrational mode that is present in atomically precise, bottom-up synthesized armchair graphene nanoribbons (AGNRs). Our Raman study demonstrates that this mode is present in all families of AGNRs and provides information on their length. Our spectroscopic findings are corroborated by scanning tunneling microscopy images and supported by first-principles calculations that allow us to attribute this mode to a longitudinal acoustic phonon. Finally, we show that this mode is a sensitive probe for the overall structural integrity of the ribbons and their interaction with technologically relevant substrates.

cond-mat.mes-hall↗

arXiv2019

On-surface synthesis of polyazulene with 2,6-connectivity

Azulene, the smallest neutral nonalternant aromatic hydrocarbon, serves as not only a prototype for fundamental studies but also a versatile building block for functional materials because of its unique opto(electronic) properties. Here, we report the on-surface synthesis and characterization of the homopolymer of azulene connected exclusively at the 2,6-positions using 2,6-diiodoazulene as the monomer precursor. As an intermediate to the formation of polyazulene, a gold-(2,6-azulenylene) chain is observed.

cond-mat.mtrl-sci↗

arXiv2019

Band Gap of Atomically Precise Graphene Nanoribbons as a Function of Ribbon Length and Termination

We study the band gap of finite $N_A=7$ armchair graphene nanoribbons (7-AGNRs) on Au(111) through scanning tunneling microscopy/spectroscopy combined with density functional theory calculations. The band gap of 7-AGNRs with lengths of 6 nm and more is converged to within 0.1 eV of its bulk value of 2.3 eV, while the band gap opens by several hundred meV in very short 7-AGNRs. The termination has a significant effect on the band gap, doubly hydrogenated termini yielding a lower band gap than singly hydrogenated ones.

cond-mat.mes-hall↗

arXiv2019

On-surface synthesis of antiaromatic and open-shell indeno[2,1-b]fluorene polymers and their lateral fusion into porous ribbons

Polycyclic hydrocarbons have received great attention due to their potential role in organic electronics and, for open-shell systems with unpaired electron densities, in spintronics and da-ta storage. However, the intrinsic instability of polyradical hydrocarbons severely limits de-tailed investigations of their electronic structure. Here, we report the on-surface synthesis of conjugated polymers consisting of indeno[2,1-b]fluorene units, which are antiaromatic and open-shell biradicaloids. The observed reaction products, which also include a non-benzenoid porous ribbon arising from lateral fusion of unprotected indeno[2,1-b]fluorene chains, have been characterized via low temperature scanning tunneling microscopy/spectroscopy and non-contact atomic force microscopy, complemented by density-functional theory calculations. These polymers present a low band gap when adsorbed on Au(111). Moreover, their pro-nounced antiaromaticity and radical character, elucidated by ab initio calculations, make them promising candidates for applications in electronics and spintronics. Further, they provide a rich playground to explore magnetism in low-dimensional organic nanomaterials.

cond-mat.mtrl-sci↗

arXiv2019

Optimized substrates and measurement approaches for Raman spectroscopy of graphene nanoribbons

The on-surface synthesis of graphene nanoribbons (GNRs) allows for the fabrication of atomically precise narrow GNRs. Despite their exceptional properties which can be tuned by ribbon width and edge structure, significant challenges remain for GNR processing and characterization. In this contribution, we use Raman spectroscopy to characterize different types of GNRs on their growth substrate and to track their quality upon substrate transfer. We present a Raman-optimized (RO) device substrate and an optimized mapping approach that allows for acquisition of high-resolution Raman spectra, achieving enhancement factors as high as 120 with respect to signals measured on standard SiO2/Si substrates. We show that this approach is well-suited to routinely monitor the geometry-dependent low-frequency modes of GNRs. In particular, we track the radial breathing-like mode (RBLM) and the shear-like mode (SLM) for 5-, 7- and 9-atom wide armchair GNRs (AGNRs) and compare their frequencies with first-principles calculations.

cond-mat.mtrl-sci↗

arXiv2019

On-Surface Hydrogen-Induced Covalent Coupling of Polycyclic Aromatic Hydrocarbons via a Superhydrogenated Intermediate

The activation and subsequent covalent coupling of polycyclic aromatic hydrocarbons (PAHs) are of great interest in fields like chemistry, energy, biology, or health, among others. However, this is not a trivial process. So far, it is based on the use of catalysts that drive and increase the efficiency of the reaction. Here, we report on an unprecedented method in which the dehydrogenation and covalent coupling is thermally activated in the presence of atomic hydrogen and a surface. This mechanism, which requires of the superhydrogenation of the PAHs, has been characterized by high-resolution scanning tunnelling microscopy (STM) and rationalized by density functional theory (DFT) calculations. This work opens a door toward the formation of covalent, PAH-based, macromolecular nanostructures on low-reactive surfaces, thus facilitating its applicability.

cond-mat.mtrl-sci↗

arXiv2019

Structure-dependent electrical properties of graphene nanoribbon devices with graphene electrodes

Graphene nanoribbons (GNRs) are a novel and intriguing class of materials in the field of nanoelectronics, since their properties, solely defined by their width and edge type, are controllable with high precision directly from synthesis. Here we study the correlation between the GNR structure and the corresponding device electrical properties. We investigated a series of field effect devices consisting of a film of armchair GNRs with different structures (namely width and/or length) as the transistor channel, contacted with narrowly spaced graphene sheets as the source-drain electrodes. By analyzing several tens of junctions for each individual GNR type, we observe that the values of the output current display a width-dependent behavior, indicating electronic bandgaps in good agreement with the predicted theoretical values. These results provide insights into the link between the ribbon structure and the device properties, which are fundamental for the development of GNR-based electronics.

cond-mat.mes-hall↗

arXiv2019

Substrate transfer and ex situ characterization of on-surface synthesized graphene nanoribbons

Recent progress in the on-surface synthesis of graphene nanoribbons (GNRs) has given access to atomically precise narrow GNRs with tunable electronic band gaps that makes them excellent candidates for room-temperature switching devices such as field-effect transistors (FET). However, in spite of their exceptional properties, significant challenges remain for GNR processing and characterization. This contribution addresses some of the most important challenges, including GNR fabrication scalability, substrate transfer, long-term stability under ambient conditions and ex situ characterization. We focus on 7- and 9-atom wide armchair graphene nanoribbons (i.e, 7-AGNR; and 9-AGNR) grown on 200 nm Au(111)/mica substrates using a high throughput system. Transfer of both, 7- and 9-AGNRs from their Au growth sub-strate onto various target substrates for additional characterization is accomplished utilizing a polymer-free method that avoids residual contamination. This results in a homogeneous GNR film morphology with very few tears and wrinkles, as examined by atomic force microscopy. Raman spectroscopy indicates no significant degradation of GNR quality upon substrate transfer, and reveals that GNRs have remarkable stability under ambient conditions over a 24-month period. The transferred GNRs are analyzed using multi-wavelength Raman spectroscopy, which provides detailed insight into the wavelength dependence of the width-specific vibrational modes. Finally, we characterize the optical properties of 7- and 9-AGNRs via ultra-violet-visible (UV-Vis) spectroscopy

cond-mat.mtrl-sci↗

arXiv2018

Probing optical excitations in chevron-like armchair graphene nanoribbons

The bottom-up fabrication graphene nanoribbons (GNRs) has opened new opportunities to specifically control their electronic and optical properties by precisely controlling their atomic structure. Here, we address excitations in GNRs with periodic structural wiggles, so-called Chevron GNRs. Based on reflectance difference and high-resolution electron energy loss spectroscopies together with ab-initio simulations, we demonstrate that their excited-state properties are dominated by strongly bound excitons. The spectral fingerprints corresponding to different reaction stages in their bottom-up fabrication are also unequivocally identified, allowing us to follow the exciton build-up from the starting monomer precursor to the final ribbon structure.

cond-mat.mtrl-sci↗

arXiv2018

Engineering of robust topological quantum phases in graphene nanoribbons

Here we present a flexible strategy to realize robust nanomaterials exhibiting valence electronic structures whose fundamental physics is described by the SSH-Hamiltonian. These solid-state materials are realized using atomically precise graphene nanoribbons (GNR). We demonstrate the controlled periodic coupling of topological boundary states at junctions of armchair GNRs of different widths to create quasi-1D trivial and non-trivial electronic quantum phases. Their topological class is experimentally determined by drawing upon the bulk-boundary correspondence and measuring the presence (non-trivial) or absence (trivial) of localized end states by scanning tunneling spectroscopy (STS). The strategy we propose has the potential to tune the band width of the topological electronic bands close to the energy scale of proximity induced spin-orbit coupling or superconductivity, and may allow the realization of Kitaev like Hamiltonians and Majorana type end states.

cond-mat.mes-hall↗

arXiv2017

Short-Channel Field Effect Transistors with 9-Atom and 13-Atom wide Graphene Nanoribbons

Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap of these GNRs have prevented the fabrication of devices with the desired performance and switching behaviour. Here, by fabricating short channel (Lch ~20 nm) devices with a thin, high-k gate dielectric and a 9-atom wide (0.95 nm) armchair GNR as the channel material, we demonstrate FETs with high on-current (Ion >1 uA at Vd = -1 V) and high Ion/Ioff ~10^5 at room temperature. We find that the performance of these devices is limited by tunnelling through the Schottky barrier (SB) at the contacts and we observe an increase in the transparency of the barrier by increasing the gate field near the contacts. Our results thus demonstrate successful fabrication of high performance short-channel FETs with bottom-up synthesized armchair GNRs.

cond-mat.mes-hall↗

arXiv2016

Superlubricity of Graphene Nanoribbons on Gold Surfaces

The state of vanishing friction known as superlubricity has important applications for energy saving and increasing the lifetime of devices. Superlubricity detected with atomic force microscopy appears in examples like sliding large graphite flakes or gold nanoclusters across surfaces. However, the origin of the behavior is poorly understood due to the lack of a controllable nano-contact. We demonstrate graphene nanoribbons superlubricity when sliding on gold with a joint experimental and computational approach. The atomically well-defined contact allows us to trace the origin of superlubricity, unravelling the role played by edges, surface reconstruction and ribbon elasticity. Our results pave the way to the scale-up of superlubricity toward the realization of frictionless coatings.

cond-mat.mes-hall↗