arXiv subjects

Ron O. Dror

Publications and source records attributed to Ron O. Dror.

11 recordsLinked to original sources

arXiv2025

Unlocking hidden biomolecular conformational landscapes in diffusion models at inference time

The function of biomolecules such as proteins depends on their ability to interconvert between a wide range of structures or "conformations." Researchers have endeavored for decades to develop computational methods to predict the distribution of conformations, which is far harder to determine experimentally than a static folded structure. We present ConforMix, an inference-time algorithm that enhances sampling of conformational distributions using a combination of classifier guidance, filtering, and free energy estimation. Our approach upgrades diffusion models -- whether trained for static structure prediction or conformational generation -- to enable more efficient discovery of conformational variability without requiring prior knowledge of major degrees of freedom. ConforMix is orthogonal to improvements in model pretraining and would benefit even a hypothetical model that perfectly reproduced the Boltzmann distribution. Remarkably, when applied to a diffusion model trained for static structure prediction, ConforMix captures structural changes including domain motion, cryptic pocket flexibility, and transporter cycling, while avoiding unphysical states. Case studies of biologically critical proteins demonstrate the scalability, accuracy, and utility of this method.

q-bio.BM↗

arXiv2025

A Graph Completion Method that Jointly Predicts Geometry and Topology Enables Effective Molecule Assembly

A common starting point for drug design is to find small chemical groups or "fragments" that form interactions with distinct subregions in a protein binding pocket. The subsequent challenge is to assemble these fragments into a molecule that has high affinity to the protein, by adding chemical bonds between atoms in different fragments. This "molecule assembly" task is particularly challenging because, initially, fragment positions are known only approximately. Prior methods for spatial graph completion-adding missing edges to a graph whose nodes have associated spatial coordinates-either treat node positions as fixed or adjust node positions before predicting edges. The fact that these methods treat geometry and topology prediction separately limits their ability to reconcile noisy geometries and plausible connectivities. To address this limitation, we introduce EdGr, a spatial graph diffusion model that reasons jointly over geometry and topology of molecules to simultaneously predict fragment positions and inter-fragment bonds. Importantly, predicted edge likelihoods directly influence node position updates during the diffusion denoising process, allowing connectivity cues to guide spatial movements, and vice versa. EdGr substantially outperforms previous methods on the molecule assembly task and maintains robust performance as noise levels increase. Beyond drug discovery, our approach of explicitly coupling geometry and topology prediction is broadly applicable to spatial graph completion problems, such as neural circuit reconstruction, 3D scene understanding, and sensor network design.

q-bio.QM↗

arXiv2023

Enhancing Ligand Pose Sampling for Molecular Docking

Deep learning promises to dramatically improve scoring functions for molecular docking, leading to substantial advances in binding pose prediction and virtual screening. To train scoring functions-and to perform molecular docking-one must generate a set of candidate ligand binding poses. Unfortunately, the sampling protocols currently used to generate candidate poses frequently fail to produce any poses close to the correct, experimentally determined pose, unless information about the correct pose is provided. This limits the accuracy of learned scoring functions and molecular docking. Here, we describe two improved protocols for pose sampling: GLOW (auGmented sampLing with sOftened vdW potential) and a novel technique named IVES (IteratiVe Ensemble Sampling). Our benchmarking results demonstrate the effectiveness of our methods in improving the likelihood of sampling accurate poses, especially for binding pockets whose shape changes substantially when different ligands bind. This improvement is observed across both experimentally determined and AlphaFold-generated protein structures. Additionally, we present datasets of candidate ligand poses generated using our methods for each of around 5,000 protein-ligand cross-docking pairs, for training and testing scoring functions. To benefit the research community, we provide these cross-docking datasets and an open-source Python implementation of GLOW and IVES at https://github.com/drorlab/GLOW_IVES .

q-bio.BM↗

arXiv2023

FlexVDW: A machine learning approach to account for protein flexibility in ligand docking

Most widely used ligand docking methods assume a rigid protein structure. This leads to problems when the structure of the target protein deforms upon ligand binding. In particular, the ligand's true binding pose is often scored very unfavorably due to apparent clashes between ligand and protein atoms, which lead to extremely high values of the calculated van der Waals energy term. Traditionally, this problem has been addressed by explicitly searching for receptor conformations to account for the flexibility of the receptor in ligand binding. Here we present a deep learning model trained to take receptor flexibility into account implicitly when predicting van der Waals energy. We show that incorporating this machine-learned energy term into a state-of-the-art physics-based scoring function improves small molecule ligand pose prediction results in cases with substantial protein deformation, without degrading performance in cases with minimal protein deformation. This work demonstrates the feasibility of learning effects of protein flexibility on ligand binding without explicitly modeling changes in protein structure.

q-bio.BM↗

arXiv2022

Systematic Analysis of Biomolecular Conformational Ensembles with PENSA

Atomic-level simulations are widely used to study biomolecules and their dynamics. A common goal in such studies is to compare simulations of a molecular system under several conditions -- for example, with various mutations or bound ligands -- in order to identify differences between the molecular conformations adopted under these conditions. However, the large amount of data produced by simulations of ever larger and more complex systems often renders it difficult to identify the structural features that are relevant for a particular biochemical phenomenon. We present a flexible software package named PENSA that enables a comprehensive and thorough investigation into biomolecular conformational ensembles. It provides featurizations and feature transformations that allow for a complete representation of biomolecules like proteins and nucleic acids, including water and ion binding sites, thus avoiding bias that would come with manual feature selection. PENSA implements methods to systematically compare the distributions of molecular features across ensembles to find the significant differences between them and identify regions of interest. It also includes a novel approach to quantify the state-specific information between two regions of a biomolecule, which allows, e.g., tracing information flow to identify allosteric pathways. PENSA also comes with convenient tools for loading data and visualizing results, making them quick to process and easy to interpret. PENSA is an open-source Python library maintained at https://github.com/drorlab/pensa along with an example workflow and a tutorial. We demonstrate its usefulness in real-world examples by showing how it helps to determine molecular mechanisms efficiently.

q-bio.BM↗

arXiv2022

ATOM3D: Tasks On Molecules in Three Dimensions

Computational methods that operate on three-dimensional molecular structure have the potential to solve important questions in biology and chemistry. In particular, deep neural networks have gained significant attention, but their widespread adoption in the biomolecular domain has been limited by a lack of either systematic performance benchmarks or a unified toolkit for interacting with molecular data. To address this, we present ATOM3D, a collection of both novel and existing benchmark datasets spanning several key classes of biomolecules. We implement several classes of three-dimensional molecular learning methods for each of these tasks and show that they consistently improve performance relative to methods based on one- and two-dimensional representations. The specific choice of architecture proves to be critical for performance, with three-dimensional convolutional networks excelling at tasks involving complex geometries, graph networks performing well on systems requiring detailed positional information, and the more recently developed equivariant networks showing significant promise. Our results indicate that many molecular problems stand to gain from three-dimensional molecular learning, and that there is potential for improvement on many tasks which remain underexplored. To lower the barrier to entry and facilitate further developments in the field, we also provide a comprehensive suite of tools for dataset processing, model training, and evaluation in our open-source atom3d Python package. All datasets are available for download from https://www.atom3d.ai .

cs.LG↗

arXiv2021

Equivariant Graph Neural Networks for 3D Macromolecular Structure

Representing and reasoning about 3D structures of macromolecules is emerging as a distinct challenge in machine learning. Here, we extend recent work on geometric vector perceptrons and apply equivariant graph neural networks to a wide range of tasks from structural biology. Our method outperforms all reference architectures on three out of eight tasks in the ATOM3D benchmark, is tied for first on two others, and is competitive with equivariant networks using higher-order representations and spherical harmonic convolutions. In addition, we demonstrate that transfer learning can further improve performance on certain downstream tasks. Code is available at https://github.com/drorlab/gvp-pytorch.

cs.LG↗

arXiv2021

Hierarchical, rotation-equivariant neural networks to select structural models of protein complexes

Predicting the structure of multi-protein complexes is a grand challenge in biochemistry, with major implications for basic science and drug discovery. Computational structure prediction methods generally leverage pre-defined structural features to distinguish accurate structural models from less accurate ones. This raises the question of whether it is possible to learn characteristics of accurate models directly from atomic coordinates of protein complexes, with no prior assumptions. Here we introduce a machine learning method that learns directly from the 3D positions of all atoms to identify accurate models of protein complexes, without using any pre-computed physics-inspired or statistical terms. Our neural network architecture combines multiple ingredients that together enable end-to-end learning from molecular structures containing tens of thousands of atoms: a point-based representation of atoms, equivariance with respect to rotation and translation, local convolutions, and hierarchical subsampling operations. When used in combination with previously developed scoring functions, our network substantially improves the identification of accurate structural models among a large set of possible models. Our network can also be used to predict the accuracy of a given structural model in absolute terms. The architecture we present is readily applicable to other tasks involving learning on 3D structures of large atomic systems.

q-bio.BM↗

arXiv2020

Protein model quality assessment using rotation-equivariant, hierarchical neural networks

Proteins are miniature machines whose function depends on their three-dimensional (3D) structure. Determining this structure computationally remains an unsolved grand challenge. A major bottleneck involves selecting the most accurate structural model among a large pool of candidates, a task addressed in model quality assessment. Here, we present a novel deep learning approach to assess the quality of a protein model. Our network builds on a point-based representation of the atomic structure and rotation-equivariant convolutions at different levels of structural resolution. These combined aspects allow the network to learn end-to-end from entire protein structures. Our method achieves state-of-the-art results in scoring protein models submitted to recent rounds of CASP, a blind prediction community experiment. Particularly striking is that our method does not use physics-inspired energy terms and does not rely on the availability of additional information (beyond the atomic structure of the individual protein model), such as sequence alignments of multiple proteins.

q-bio.QM↗

arXiv2020

Geometric Prediction: Moving Beyond Scalars

Many quantities we are interested in predicting are geometric tensors; we refer to this class of problems as geometric prediction. Attempts to perform geometric prediction in real-world scenarios have been limited to approximating them through scalar predictions, leading to losses in data efficiency. In this work, we demonstrate that equivariant networks have the capability to predict real-world geometric tensors without the need for such approximations. We show the applicability of this method to the prediction of force fields and then propose a novel formulation of an important task, biomolecular structure refinement, as a geometric prediction problem, improving state-of-the-art structural candidates. In both settings, we find that our equivariant network is able to generalize to unseen systems, despite having been trained on small sets of examples. This novel and data-efficient ability to predict real-world geometric tensors opens the door to addressing many problems through the lens of geometric prediction, in areas such as 3D vision, robotics, and molecular and structural biology.

cs.LG↗

arXiv2019

End-to-End Learning on 3D Protein Structure for Interface Prediction

Despite an explosion in the number of experimentally determined, atomically detailed structures of biomolecules, many critical tasks in structural biology remain data-limited. Whether performance in such tasks can be improved by using large repositories of tangentially related structural data remains an open question. To address this question, we focused on a central problem in biology: predicting how proteins interact with one another---that is, which surfaces of one protein bind to those of another protein. We built a training dataset, the Database of Interacting Protein Structures (DIPS), that contains biases but is two orders of magnitude larger than those used previously. We found that these biases significantly degrade the performance of existing methods on gold-standard data. Hypothesizing that assumptions baked into the hand-crafted features on which these methods depend were the source of the problem, we developed the first end-to-end learning model for protein interface prediction, the Siamese Atomic Surfacelet Network (SASNet). Using only spatial coordinates and identities of atoms, SASNet outperforms state-of-the-art methods trained on gold-standard structural data, even when trained on only 3% of our new dataset. Code and data available at https://github.com/drorlab/DIPS.

q-bio.BM↗