arXiv subjects

Ronald Dekker

Publications and source records attributed to Ronald Dekker.

9 recordsLinked to original sources

arXiv2025

Demonstration of on-chip all-optical switching of magnetization in integrated photonics

Ultrafast all-optical magnetization switching (AOS) holds great promise for nextgeneration spintronic memory and hybrid spintronic-photonic systems. However, most implementations to date rely on bulky free-space optical setups, limiting scalability and practical integration. As a critical step toward integrated applications, we demonstrate single-pulse AOS within a silicon nitride (Si3N4) photonic integrated circuit. Using trains of femtosecond laser pulses guided through on-chip waveguides, we achieve deterministic toggle switching in a sub-micron out-of-plane Co/Gd Hall cross patterned directly atop the photonic waveguide. Electrical readout via the anomalous Hall effect reveals a switching contrast of up to 90% for 500 nm-wide devices. In larger Hall crosses, the contrast decreases and switching becomes stochastic, consistent with spatially non-uniform optical absorption as confirmed by finite-element simulations. This behavior is hypothetically attributed to domain wall relaxation and thermally assisted (de)pinning processes within partially switched regions. Our results highlight the critical role of device scaling in achieving robust on-chip AOS and establish a foundation for ultrafast, energy-efficient, and fully integrated spintronic-photonic platforms.

physics.optics↗

arXiv2024

Chip-integrated extended-cavity mode-locked laser in the visible

Mode-locked lasers are of interest for applications such as biological imaging, non-linear frequency conversion, and single-photon generation. In the infrared, chip-integrated mode-locked lasers have been demonstrated through integration of laser diodes with low-loss photonic circuits. However additional challenges, such as a higher propagation loss and smaller alignment tolerances have prevented the realization of such lasers in the visible range. Here, we demonstrate the first chip-integrated mode-locked diode laser in the visible using an integrated photonic circuit for cavity extension. Based on a gallium arsenide gain chip and a low-loss silicon nitride feedback circuit, the laser is passively mode-locked using a saturable absorber implemented by focused ion beam milling. At a center wavelength of 642 nm, the laser shows an average output power of 3.4 mW, with a spectral bandwidth of 1.5 nm at a repetition rate of 7.84 GHz.

physics.optics↗

arXiv2024

Widely-tunable and narrow-linewidth hybrid-integrated diode laser at 637 nm

We present hybrid-integrated extended cavity diode lasers tunable around 637 nm, with a gain-wide spectral coverage of 8 nm. This tuning range allows addressing the zero-phonon line of nitrogen vacancy centers and includes the wavelength of HeNe lasers (633 nm). The lasers provide wide mode-hop free tuning up to 97 GHz and a narrow intrinsic linewidth down to 10 kHz. The maximum output power is 2.5 mW in a single-mode fiber, corresponding to an on-chip power of 4.0 mW. Full integration and packaging in a standard housing with fiber pigtails provide high intrinsic stability and will enable integration into complex optical systems.

physics.optics↗

arXiv2023

Sub-kHz-linewidth external-cavity laser (ECL) with Si$_{3}$N$_{4}$ resonator used as a tunable pump for a Kerr frequency comb

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. External feedback circuits can be efficiently implemented using low-loss silicon nitride (Si$_{3}$N$_{4}$) waveguides, which do not suffer from two-photon absorption and can thus handle much higher power levels than conventional silicon photonics. However, co-integrating III-V-based gain elements with tunable external feedback circuits in chip-scale modules still represents a challenge, requiring either technologically demanding heterogeneous integration techniques or costly high-precision multi-chip assembly. In this work, we demonstrate Si$_{3}$N$_{4}$-based hybrid integrated ECL that exploit 3D-printed structures such as intra-cavity photonic wire bonds and facet-attached microlenses for low-loss optical coupling with relaxed alignment tolerances, thereby overcoming the need for active alignment while maintaining the full flexibility of multi-chip integration techniques. In a proof-of-concept experiment, we demonstrate an ECL offering a 90 nm tuning range (1480 nm - 1570 nm) with on-chip output powers above 12 dBm and side-mode suppression ratios of up to 59 dB. We achieve an intrinsic linewidth of 979 Hz, which is among the lowest values reported for comparable feedback architectures. The optical loss of the intra-cavity photonic wire bond between the III-V gain element and the Si$_{3}$N$_{4}$-based tunable feedback circuit amounts to approximately (1.6 $\pm$ 0.2) dB. We use the ECL as a tunable pump laser to generate a dissipative Kerr soliton frequency comb. To the best of our knowledge, our experiments represent the first demonstration of a single-soliton Kerr comb generated with a pump that is derived from a hybrid ECL.

physics.optics↗

arXiv2021

A hybrid-integrated diode laser in the visible spectral range

Generating visible light with wide tunability and high coherence based on photonic integrated circuits is of high interest for applications in biophotonics, precision metrology and quantum technology. Here we present the first demonstration of a hybrid-integrated diode laser in the visible spectral range. Using an AlGaInP optical amplifier coupled to a low-loss Si3N4 feedback circuit based on microring resonators, we obtain a spectral coverage of 10.8 nm around 684.4 nm wavelength with up to 4.8 mW output power. The measured intrinsic linewidth is 2.3$\pm$0.2 kHz.

physics.optics↗

arXiv2020

Photonic integrated circuits for life sciences

We report on the use of silicon nitride (SiN) photonic integrated circuits (PICs) in high-value instrumentation, namely multi-color laser engines (MLEs), a core element of cutting-edge biophotonic systems applied to confocal microscopy, fluorescent microscopy - including super-resolution stimulated emission depletion (STED) microscopy - flow cytometry, optogenetics, genetic analysis and DNA sequencing, to name just a few. These have in common the selective optical excitation of molecules - fluorophores, or, in the case of optogenetics, light-gated ion channels - with laser radiation falling within their absorption spectrum. Unambiguous identification of molecules or cellular subsets often requires jointly analyzing fluorescent signals from several fluorescent markers, so that MLEs are required to provide excitation wavelengths for several commercially available biocompatible fluorophores. A number of functionalities are required from MLEs in addition to sourcing the required wavelengths: Variable attenuation and/or digital intensity modulation in the Hz to kHz range are required for a number of applications such as optical trapping, lifetime imaging, or fluorescence recovery after photobleaching (FRAP). Moreover, switching of the laser between two fiber outputs can be utilized for example to switch between scanning confocal microscopy and widefield illumination modes, for instance, for conventional fluorescence imaging.

physics.ins-det↗

arXiv2019

Hybrid integrated semiconductor lasers with silicon nitride feedback circuits

Hybrid integrated semiconductor laser sources offering extremely narrow spectral linewidth as well as compatibility for embedding into integrated photonic circuits are of high importance for a wide range of applications. We present an overview on our recently developed hybrid-integrated diode lasers with feedback from low-loss silicon nitride (Si3N4 in SiO2) circuits, to provide sub-100-Hz-level intrinsic linewidths, up to 120 nm spectral coverage around 1.55 um wavelength, and an output power above 100 mW. We show dual-wavelength operation, dual-gain operation, laser frequency comb generation, and present work towards realizing a visible-light hybrid integrated diode laser.

physics.optics↗

arXiv2017

Ultra-Stretchable Interconnects for High-Density Stretchable Electronics

The exciting field of stretchable electronics (SE) promises numerous novel applications, particularly in-body and medical diagnostics devices. However, future advanced SE miniature devices will require high-density, extremely stretchable interconnects with micron-scale footprints, which calls for proven standardized (complementary metal-oxide semiconductor (CMOS)-type) process recipes using bulk integrated circuit (IC) microfabrication tools and fine-pitch photolithography patterning. Here, we address this combined challenge of microfabrication with extreme stretchability for high-density SE devices by introducing CMOS-enabled, free-standing, miniaturized interconnect structures that fully exploit their 3D kinematic freedom through an interplay of buckling, torsion, and bending to maximize stretchability. Integration with standard CMOS-type batch processing is assured by utilizing the Flex-to-Rigid (F2R) post-processing technology to make the back-end-of-line interconnect structures free-standing, thus enabling the routine microfabrication of highly-stretchable interconnects. The performance and reproducibility of these free-standing structures is promising: an elastic stretch beyond 2000% and ultimate (plastic) stretch beyond 3000%, with <0.3% resistance change, and >10 million cycles at 1000% stretch with <1% resistance change. This generic technology provides a new route to exciting highly-stretchable miniature devices.

physics.ins-det↗

arXiv2012

Propagation of short lightpulses in microring resonators: ballistic transport versus interference in the frequency domain

The propagation of short lightpulses in waveguiding structures with optical feedback, in our case optical microresonators, has been studied theoretically and experimentally. It appears that, dependent on the measurement set-up, ballistic transport or interference in the time domain of fs and ps laser pulses can be observed. The experiments are analyzed in terms of characteristic time scales of the source, the waveguide device and the detector arrangement and are related to Heisenberg's uncertainty principle. Based on this analysis a criterion is given for the upper bitrate for error free data transmission through optical microresonators.

physics.optics↗