arXiv subjects

Ronald J. Warzoha

Publications and source records attributed to Ronald J. Warzoha.

6 recordsLinked to original sources

arXiv2026

Coherent Phonon Blocking in Superlattices

At cryogenic temperatures, phonons become one of the dominant energy carriers and thus can strongly influence the performance of electronic and sensing devices. In this work, we present a wave-mechanics based framework that predicts phonon transmission and thermal resistance of arbitrarily thick superlattices while retaining all acoustic branches, mode-conversion pathways, and angles of incidence. By enforcing phase coherence, our model predicts frequency-dependent transmission through arbitrary multi-layered structures.We use a genetic algorithm (NSGA-II) to efficiently select both materials and layer thicknesses. Our success criterion is that constituent layers satisfy the quarter-wavelength condition of the dominant phonon frequencies at a target temperature. This strategy identifies novel bilayer combinations that achieve thermal resistance of up to 3000 times greater than previously reported superlattices. The identified superlattices are poised to advance any technology that relies on coherent acoustic scattering, from ultra-low-temperature thermal insulation in superconducting flip-chip assemblies to phonon-blocking components in micro- and nano-electromechanical systems.

cond-mat.mtrl-sci↗

arXiv2025

Self-referencing photothermal common-path interferometry to measure absorption of Si3N4 membranes for laser-light sails

Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled by high-intensity lasers. We investigated the near-infrared absorption of free-standing membranes of stoichiometric silicon nitride (Si$_3$N$_4$), a candidate sail material. To resolve the small but non-zero optical loss, we used photothermal common-path interferometry (PCI), for which we developed a self-referencing modality where a PCI measurement is performed twice: once on a bare membrane, and a second time with monolayer graphene deposited on the membrane. The graphene increases the absorption of the sample by orders of magnitude, such that it can be measured by ellipsometry, without significantly affecting the thermal properties. We measured the absorption coefficient of Si$_3$N$_4$ to be (1.5-3) $\times$ 10$^{-2}$ cm$^{-1}$ at 1064 nm, making it a suitable sail material for laser intensities as high as ~10 GW/m$^2$. By comparison, silicon-rich "low stress" SiN$_x$ (x~1), with a measured absorption coefficient of approximately 8 cm$^{-1}$, is unlikely to survive such high laser intensities. Our self-referencing technique enables testing of low-loss membranes of various materials for laser sails and other applications.

physics.optics↗

arXiv2020

A Numerical Fitting Routine for Frequency-domain Thermoreflectance Measurements of Nanoscale Material Systems having Arbitrary Geometries

In this work, we develop a numerical fitting routine to extract multiple thermal parameters using frequency-domain thermoreflectance (FDTR) for materials having non-standard, non-semi-infinite geometries. The numerical fitting routine is predicated on either a 2-D or 3-D finite element analysis that permits the inclusion of non semi-infinite boundary conditions, which can not be considered in the analytical solution to the heat diffusion equation in the frequency domain. We validate the fitting routine by comparing it to the analytical solution to the heat diffusion equation used within the wider literature for FDTR and known values of thermal conductivity for semi-infinite substrates (SiO2, Al2O3 and Si). We then demonstrate its capacity to extract the thermal properties of Si when etched into micropillars that have radii on the order of the pump beam. Experimental measurements of Si micropillars with circular cross-sections are provided and fit using the numerical fitting routine established as part of this work. Likewise, we show that the analytical solution is unsuitable for the extraction of thermal properties when the geometry deviates significantly from the standard semi-infinite case. This work is critical for measuring the thermal properties of materials having arbitrary geometries, including ultra-drawn glass fibers and laser gain media.

physics.app-ph↗

arXiv2019

Elimination of Extreme Boundary Scattering via Polymer Thermal Bridging in Silica Nanoparticle Packings: Implications for Thermal Management

Recent advances in our understanding of thermal transport in nanocrystalline systems are responsible for the integration of new technologies into advanced energy systems, including thermoelectric refrigeration systems and renewable energy platforms. However, there is little understanding of heat energy transport mechanisms that govern the thermal properties of disordered nanocomposites. In this work, we explore thermal transport mechanisms in disordered packings of amorphous nanoparticles with and without a polymer filling the interstices in order to quantify the impact of thermal boundary scattering introduced at nanoparticle edges in an already amorphous system and within the context of a minimum thermal conductivity approximation. By fitting a modified minimum thermal conductivity model to temperature-dependent measurements of thermal conductivity from 80 K to 300 K, we find that the interstitial polymer {\it eliminates} boundary scattering in the disordered nanoparticle packing, which surprisingly leads to an {\it increase} in the overall thermal conductivity of the disordered nanoparticle thin-film composite. This is contrary to our expectations relative to effective medium theory and our understanding of a minimum thermal conductivity limit. Instead, we find that a stiff interstitial material improves the transmission of heat through a nanoparticle boundary, improving the thermal properties of disordered nanoparticle packing. We expect these results to provide insight into the tunability of thermal properties in disordered solids that exhibit already low thermal conductivities through the use of nanostructuring and vibrational thermal bridging.

cond-mat.mes-hall↗

arXiv2019

A Theoretical Paradigm for Thermal Rectification via Phonon Filtering and Energy Carrier Confinement

We provide a theoretical framework for the development of a solid-state thermal rectifier through a confinement in the available population of phonons on one side of an asymmetrically graded film stack. Using a modification of the phonon gas model to account for phonon filtering and population confinement, we demonstrate that for an ideal material, with low phonon anharmonicity, significant thermal rectification can be achieved even in the absence of ballistic phonon transport. This formalism is used to illustrate thermal rectification in a thin-film of diamond (1-5 nm) graded to dimensions > 1 μm exhibiting theoretical values of thermal rectification ratios between 0.75 and 6. Our theoretical formulation for thermal rectification is therefore expected to produce opportunities to design advanced solid-state devices that enable a variety of critical technologies.

cond-mat.mes-hall↗

arXiv2019

Solid-State Thermal Energy Storage Using Reversible Martensitic Transformations

The identification and use of reversible Martensitic transformations, typically described as shape memory transformations, as a new class of solid-solid phase change material is experimentally demonstrated here for the first time. To prove this claim, time-domain thermoreflectance, frequency-domain thermoreflectance, and differential scanning calorimetry studies were conducted on commercial NiTi alloys to quantify thermal conductivity and latent heat. Additional Joule-heating experiments demonstrate successful temperature leveling during transient heating and cooling in a simulated environment. Compared to standard solid-solid materials and solid-liquid paraffin, these experimental results show that shape memory alloys provide up to a two order of magnitude higher Figure of Merit. Beyond these novel experimental results, a comprehensive review of >75 binary NiTi and NiTi-based ternary and quaternary alloys in the literature shows that shape memory alloys can be tuned in a wide range of transformation temperatures (from -50 to 330{deg}C), latent heats (from 9.1 to 35.1 J/g), and thermal conductivities (from 15.6 to 28 W/mK). This can be accomplished by changing the Ni and Ti balance, introducing trace elements, and/or by thermomechanical processing. Combining excellent corrosion resistance, formability, high strength and ductility, high thermal performance, and tunability, SMAs represent an exceptional phase change material that circumvents many of the scientific and engineering challenges hindering progress in this field.

cond-mat.mtrl-sci↗