arXiv subjects

Roshan M. D'Souza

Publications and source records attributed to Roshan M. D'Souza.

6 recordsLinked to original sources

arXiv2026

Wall Shear Stress Reconstruction from Concentration: Differentiable Physics and Physics-Informed Neural Networks

Wall shear stress (WSS) governs near-wall transport dynamics and is a key hemodynamic indicator in cardiovascular flows, yet remains difficult to infer accurately due to the need for precise computation of near-wall velocity gradients. Passive scalar fields, such as concentration or temperature, are advected by the same underlying velocity field and have the potential to uncover hidden flow physics metrics such as WSS. In this work, we demonstrate such reconstruction from spatially limited passive scalar observations using two fundamentally different inverse frameworks: a differentiable physics framework based on discrete adjoint, PDE-constrained optimization, which enforces the governing equations as hard constraints, and physics-informed neural networks (PINNs), which treat them as soft constraints. Benchmark problems include a 2D canonical backward-facing step (2D-BFS) and a 3D patient-specific stenotic coronary artery. For the 2D-BFS case, evaluated under three measurement scenarios (near-wall, far-field, and combined), PINN achieves high accuracy when near-wall data are available but fails when restricted to far-field measurements, whereas the differentiable physics approach recovers accurate WSS across all scenarios. In the 3D patient-specific case, the differentiable physics framework outperforms PINNs, yielding accurate WSS reconstruction. These results establish that measurement location and inverse formulation jointly determine reconstruction fidelity in scalar-based near-wall flow inference. The proposed framework opens a path toward estimation of near-wall hemodynamics from scalar transport data, with broader applicability to fluid flow problems where passive scalars can be observed.

physics.flu-dyn↗

arXiv2026

VASTO: Simultaneous recovery of vascular geometry and blood flow via differentiable topology optimization

Computed Tomography Angiography (CTA) is widely used to reconstruct vascular geometry from projection measurements, with conventional approaches such as Filtered Back-Projection (FBP) and Iterative Reconstruction (IR) forming the clinical standard. Blood flow is subsequently estimated through Computational Fluid Dynamics (CFD) simulations, which require vascular geometry and boundary conditions to be specified a priori. Since the geometry is fixed prior to flow estimation, the recovery of unknown anatomical features (e.g., missing branches or stenoses) is precluded. In this work, we present a fluid-physics-constrained reconstruction framework that leverages topology optimization (TO) to jointly recover vascular geometry and blood velocity directly from time-resolved CTA sinograms. The formulation couples a steady incompressible flow model with a transient advection-diffusion contrast transport model, mapped to sinogram space through a differentiable projection operator. The recovered velocity fields provide hemodynamic information and can support downstream estimation of wall shear stress and flow distribution, without requiring a separate CFD pipeline. The proposed method is demonstrated on synthetic phantoms under varying sparsity and noise levels, and on representative projection data.

cs.CE↗

arXiv2026

SLE-FNO: Single-Layer Extensions for Task-Agnostic Continual Learning in Fourier Neural Operators

Scientific machine learning is increasingly used to build surrogate models, yet most models are trained under a restrictive assumption in which future data follow the same distribution as the training set. In practice, new experimental conditions or simulation regimes may differ significantly, requiring extrapolation and model updates without re-access to prior data. This creates a need for continual learning (CL) frameworks that can adapt to distribution shifts while preventing catastrophic forgetting. Such challenges are pronounced in fluid dynamics, where changes in geometry, boundary conditions, or flow regimes induce non-trivial changes to the solution. Here, we introduce a new architecture-based approach (SLE-FNO) combining a Single-Layer Extension (SLE) with the Fourier Neural Operator (FNO) to support efficient CL. SLE-FNO was compared with a range of established CL methods, including Elastic Weight Consolidation (EWC), Learning without Forgetting (LwF), replay-based approaches, Orthogonal Gradient Descent (OGD), Gradient Episodic Memory (GEM), PiggyBack, and Low-Rank Adaptation (LoRA), within a spatial field-to-field regression setting. The models were trained to map transient concentration fields to time-averaged wall shear stress (TAWSS) in pulsatile aneurysmal blood flow. Tasks were derived from 230 computational fluid dynamics simulations grouped into four sequential and out-of-distribution configurations. Results show that replay-based methods and architecture-based approaches (PiggyBack, LoRA, and SLE-FNO) achieve the best retention, with SLE-FNO providing the strongest overall balance between plasticity and stability, achieving accuracy with zero forgetting and minimal additional parameters. Our findings highlight key differences between CL algorithms and introduce SLE-FNO as a promising strategy for adapting baseline models when extrapolation is required.

cs.LG↗

arXiv2021

Integrating multi-fidelity blood flow data with reduced-order data assimilation

High-fidelity patient-specific modeling of cardiovascular flows and hemodynamics is challenging. Direct blood flow measurement inside the body with in-vivo measurement modalities such as 4D flow magnetic resonance imaging (4D flow MRI) suffer from low resolution and acquisition noise. In-vitro experimental modeling and patient-specific computational fluid dynamics (CFD) models are subject to uncertainty in patient-specific boundary conditions and model parameters. Furthermore, collecting blood flow data in the near-wall region (e.g., wall shear stress) with experimental measurement modalities poses additional challenges. In this study, a computationally efficient data assimilation method called reduced-order modeling Kalman filter (ROM-KF) was proposed, which combined a sequential Kalman filter with reduced-order modeling using a linear model provided by dynamic mode decomposition (DMD). The goal of ROM-KF was to overcome low resolution and noise in experimental and uncertainty in CFD modeling of cardiovascular flows. The accuracy of the method was assessed with 1D Womersley flow, 2D idealized aneurysm, and 3D patient-specific cerebral aneurysm models. Synthetic experimental data were used to enable direct quantification of errors using benchmark datasets. The accuracy of ROM-KF in reconstructing near-wall hemodynamics was assessed by applying the method to problems where near-wall blood flow data were missing in the experimental dataset. The ROM-KF method provided blood flow data that were more accurate than the computational and synthetic experimental datasets and improved near-wall hemodynamics quantification.

physics.flu-dyn↗

arXiv2021

Uncovering near-wall blood flow from sparse data with physics-informed neural networks

Near-wall blood flow and wall shear stress (WSS) regulate major forms of cardiovascular disease, yet they are challenging to quantify with high fidelity. Patient-specific computational and experimental measurement of WSS suffers from uncertainty, low resolution, and noise issues. Physics-informed neural networks (PINN) provide a flexible deep learning framework to integrate mathematical equations governing blood flow with measurement data. By leveraging knowledge about the governing equations (herein, Navier-Stokes), PINN overcomes the large data requirement in deep learning. In this study, it was shown how PINN could be used to improve WSS quantification in diseased arterial flows. Specifically, blood flow problems where the inlet and outlet boundary conditions were not known were solved by assimilating very few measurement points. Uncertainty in boundary conditions is a common feature in patient-specific computational fluid dynamics models. It was shown that PINN could use sparse velocity measurements away from the wall to quantify WSS with very high accuracy even without full knowledge of the boundary conditions. Examples in idealized stenosis and aneurysm models were considered demonstrating how partial knowledge about the flow physics could be combined with partial measurements to obtain accurate near-wall blood flow data. The proposed hybrid data-driven and physics-based deep learning framework has high potential in transforming high-fidelity near-wall hemodynamics modeling in cardiovascular disease.

physics.flu-dyn↗

arXiv2019

An Application of Manifold Learning in Global Shape Descriptors

With the rapid expansion of applied 3D computational vision, shape descriptors have become increasingly important for a wide variety of applications and objects from molecules to planets. Appropriate shape descriptors are critical for accurate (and efficient) shape retrieval and 3D model classification. Several spectral-based shape descriptors have been introduced by solving various physical equations over a 3D surface model. In this paper, for the first time, we incorporate a specific group of techniques in statistics and machine learning, known as manifold learning, to develop a global shape descriptor in the computer graphics domain. The proposed descriptor utilizes the Laplacian Eigenmap technique in which the Laplacian eigenvalue problem is discretized using an exponential weighting scheme. As a result, our descriptor eliminates the limitations tied to the existing spectral descriptors, namely dependency on triangular mesh representation and high intra-class quality of 3D models. We also present a straightforward normalization method to obtain a scale-invariant descriptor. The extensive experiments performed in this study show that the present contribution provides a highly discriminative and robust shape descriptor under the presence of a high level of noise, random scale variations, and low sampling rate, in addition to the known isometric-invariance property of the Laplace-Beltrami operator. The proposed method significantly outperforms state-of-the-art algorithms on several non-rigid shape retrieval benchmarks.

cs.GR↗