arXiv subjects

Roxana Smarandache

Publications and source records attributed to Roxana Smarandache.

At least 19 recordsLinked to original sources

arXiv2026

Lifted-Product QLDPC Codes in the Polynomial Domain

This paper presents a finite-length polynomial-domain formulation of lifted-product quantum low-density parity-check (QLDPC) codes. We formulate the code construction over the quotient ring F 2[D]/(D L + 1), where polynomial base matrices are lifted entrywise to binary circulant blocks. This representation gives a compact algebraic description of the lifted-product parity-check matrices and allows CSS orthogonality to be analyzed before binary expansion. We show that the standard circulant lifting map is compatible with polynomial conjugation, which implies that the resulting binary matrices satisfy the CSS commutation constraint. The construction is illustrated with a constraint length 7, rate 1/2 NASA convolutional code example, and numerical examples are provided from a 3 x 4 polynomial parity-check matrix. The finite-length performance of selected constructed codes is then evaluated over the depolarizing channel using various benchmark decoders. The resulting framework gives a structured method to construct finite-length lifted-product QLDPC codes from small polynomial base matrices.

cs.IT↗

arXiv2026

The Number of Cycles of Bi-regular Tanner Graphs in Terms of the Eigenvalues of the Adjacency Matrix

In this paper, we explore new connections between the cycles in the graph of low-density parity-check (LDPC) codes and the eigenvalues of the corresponding adjacency matrix. The resulting observations are used to derive fast, simple, recursive formulas for the number of cycles $N_{2k}$ of length $2k$, $k<g$, in a bi-regular graph of girth $g$. Moreover, we derive explicit formulas for $N_{2k}$, $k\leq 7$, in terms of the nonzero eigenvalues of the adjacency matrix. Throughout, we focus on the practically interesting class of bi-regular quasi-cyclic LDPC (QC-LDPC) codes, for which the eigenvalues can be obtained efficiently by applying techniques used for block-circulant matrices.

cs.IT↗

arXiv2025

Generalized Quasi-Cyclic LDPC Codes: Design and Efficient Encoding

Generalized low-density parity-check (GLDPC) codes, where single parity-check constraints on the code bits are replaced with generalized constraints (an arbitrary linear code), are a promising class of codes for low-latency communication. The block error rate performance of the GLDPC codes, combined with a complementary outer code, has been shown to outperform a variety of state-of-the-art code and decoder designs with suitable lengths and rates for the 5G ultra-reliable low-latency communication (URLLC) regime. A major drawback of these codes is that it is not known how to construct appropriate polynomial matrices to encode them efficiently. In this paper, we analyze practical constructions of quasi-cyclic GLDPC (QC-GLDPC) codes and show how to construct polynomial generator matrices in various forms using minors of the polynomial matrix. The approach can be applied to fully generalized matrices or partially generalized (with mixed constraint node types) to find better performance/rate trade-offs. The resulting encoding matrices are presented in useful forms that facilitate efficient implementation. The rich substructure displayed also provides us with new methods of determining low weight codewords, providing lower and upper bounds on the minimum distance and often giving those of weight equal to the minimum distance. Based on the minors of the polynomial parity-check matrix, we also give a formula for the rank of any parity-check matrix representing a QC-LDPC or QC-GLDPC code, and hence, the dimension of the code. Finally, we show that by applying double graph-liftings, the code parameters can be improved without affecting the ability to obtain a polynomial generator matrix.

cs.IT↗

arXiv2021

A Unifying Framework to Construct QC-LDPC Tanner Graphs of Desired Girth

This paper presents a unifying framework to construct low-density parity-check (LDPC) codes with associated Tanner graphs of desired girth. Towards this goal, we highlight the role that a certain square matrix that appears in the product of the parity-check matrix with its transpose has in the construction of codes with graphs of desired girth and further explore it in order to generate the set of necessary and sufficient conditions for a Tanner graph to have a given girth between 6 and 12. For each such girth, we present algorithms to construct codes of the desired girth and we show how to use them to compute the minimum necessary value of the lifting factor. For girth larger than 12, we show how to use multi-step graph lifting methods to deterministically modify codes in order to increase their girth. We also give a new perspective on LDPC protograph-based parity-check matrices by viewing them as rows of a parity-check matrix equal to the sum of certain permutation matrices and obtain an important connection between all protographs and those with variable nodes of degree 2. We also show that the results and methodology that we develop for the all-one protograph can be used and adapted to analyze the girth of the Tanner graph of any parity-check matrix and demonstrate how this can be done using a well-known irregular, multi-edge protograph specified by the NASA Consultative Committee for Space Data Systems (CCSDS). Throughout the paper, we exemplify our theoretical results with constructions of LDPC codes with Tanner graphs of any girth between 6 and 14 and give sufficient conditions for a multi-step lifted parity-check matrix to have girth between 14 and 22.

cs.IT↗

arXiv2021

Necessary and Sufficient Girth Conditions for LDPC Tanner Graphs with Denser Protographs

This paper gives necessary and sufficient conditions for the Tanner graph of a quasi-cyclic (QC) low-density parity-check (LDPC) code based on the all-one protograph to have girth 6, 8, 10, and 12, respectively, in the case of parity-check matrices with column weight 4. These results are a natural extension of the girth results of the already-studied cases of column weight 2 and 3, and it is based on the connection between the girth of a Tanner graph given by a parity-check matrix and the properties of powers of the product between the matrix and its transpose. The girth conditions can be easily incorporated into fast algorithms that construct codes of desired girth between 6 and 12; our own algorithms are presented for each girth, together with constructions obtained from them and corresponding computer simulations. More importantly, this paper emphasizes how the girth conditions of the Tanner graph corresponding to a parity-check matrix composed of circulants relate to the matrix obtained by adding (over the integers) the circulant columns of the parity-check matrix. In particular, we show that imposing girth conditions on a parity-check matrix is equivalent to imposing conditions on a square circulant submatrix of size 4 obtained from it.

cs.IT↗

arXiv2021

Necessary and Sufficient Girth Conditions for Tanner Graphs of Quasi-Cyclic LDPC Codes

This paper revisits the connection between the girth of a protograph-based LDPC code given by a parity-check matrix and the properties of powers of the product between the matrix and its transpose in order to obtain the necessary and sufficient conditions for a code to have given girth between 6 and 12, and to show how these conditions can be incorporated into simple algorithms to construct codes of that girth. To this end, we highlight the role that certain submatrices that appear in these products have in the construction of codes of desired girth. In particular, we show that imposing girth conditions on a parity-check matrix is equivalent to imposing conditions on a square submatrix obtained from it and we show how this equivalence is particularly strong for a protograph based parity-check matrix of variable node degree 2, where the cycles in its Tanner graph correspond one-to-one to the cycles in the Tanner graph of a square submatrix obtained by adding the permutation matrices (or products of these) in the composition of the parity-check matrix. We end the paper with exemplary constructions of codes with various girths and computer simulations. Although, we mostly assume the case of fully connected protographs of variable node degree 2 and 3, the results can be used for any parity-check matrix/protograph-based Tanner graph.

cs.IT↗

arXiv2018

Free Pseudodistance Growth Rates for Spatially Coupled LDPC Codes over the BEC

The minimum pseudoweight is an important parameter related to the decoding performance of LDPC codes with iterative message-passing decoding. In this paper, we consider ensembles of periodically time-varying spatially coupled LDPC (SC-LDPC) codes and the pseudocodewords arising from their finite graph covers of a fixed degree. We show that for certain $(J,K)$-regular SC-LDPC code ensembles and a fixed cover degree, the typical minimum pseudoweight of the unterminated (and associated tail-biting/terminated) SC-LDPC code ensembles grows linearly with the constraint (block) length as the constraint (block) length tends to infinity. We prove that one can bound the the free pseudodistance growth rate over a BEC from below (respectively, above) using the associated tail-biting (terminated) SC-LDPC code ensemble and show empirically that these bounds coincide for a sufficiently large period, which gives the exact free pseudodistance growth rate for the SC-LDPC ensemble considered.

cs.IT↗

arXiv2015

Bounding the Bethe and the Degree-$M$ Bethe Permanents

It was recently conjectured that the permanent of a ${P}$-lifting $θ^{\uparrow{P}}$ of a matrix $θ$ of degree $M$ is less than or equal to the $M$th power of the permanent perm$(θ)$, i.e., perm$(θ^{\uparrow{P}})\leq(\text{perm}(θ))^M$ and, consequently, that the degree-$M$ Bethe permanent $\text{perm}_{M,\mathrm{B}} (θ)$ of a matrix $θ$ is less than or equal to the permanent perm$(θ)$ of $θ$, i.e., perm$_{M, \mathrm{B}} (θ)\leq \text{perm}(θ)$. In this paper, we prove these related conjectures and show in addition a few properties of the permanent of block matrices that are lifts of a matrix. As a corollary, we obtain an alternative proof of the inequality perm$_{\mathrm{B}} (θ)\leq \text{perm}(θ)$ on the Bethe permanent of the base matrix $θ$ that uses only the combinatorial definition of the Bethe permanent.

cs.IT↗

arXiv2014

Quasi-Cyclic LDPC Codes based on Pre-Lifted Protographs

Quasi-cyclic low-density parity-check (QC-LDPC) codes based on protographs are of great interest to code designers because analysis and implementation are facilitated by the protograph structure and the use of circulant permutation matrices for protograph lifting. However, these restrictions impose undesirable fixed upper limits on important code parameters, such as minimum distance and girth. In this paper, we consider an approach to constructing QC-LDPC codes that uses a two-step lifting procedure based on a protograph, and, by following this method instead of the usual one-step procedure, we obtain improved minimum distance and girth properties. We also present two new design rules for constructing good QC-LDPC codes using this two-step lifting procedure, and in each case we obtain a significant increase in minimum distance and achieve a certain guaranteed girth compared to one-step circulant-based liftings. The expected performance improvement is verified by simulation results.

cs.IT↗

arXiv2013

Spatially Coupled Sparse Codes on Graphs - Theory and Practice

Since the discovery of turbo codes 20 years ago and the subsequent re-discovery of low-density parity-check codes a few years later, the field of channel coding has experienced a number of major advances. Up until that time, code designers were usually happy with performance that came within a few decibels of the Shannon Limit, primarily due to implementation complexity constraints, whereas the new coding techniques now allow performance within a small fraction of a decibel of capacity with modest encoding and decoding complexity. Due to these significant improvements, coding standards in applications as varied as wireless mobile transmission, satellite TV, and deep space communication are being updated to incorporate the new techniques. In this paper, we review a particularly exciting new class of low-density parity-check codes, called spatially-coupled codes, which promise excellent performance over a broad range of channel conditions and decoded error rate requirements.

cs.IT↗

arXiv2013

Diversity Polynomials for the Analysis of Temporal Correlations in Wireless Networks

The interference in wireless networks is temporally correlated, since the node or user locations are correlated over time and the interfering transmitters are a subset of these nodes. For a wireless network where (potential) interferers form a Poisson point process and use ALOHA for channel access, we calculate the joint success and outage probabilities of n transmissions over a reference link. The results are based on the diversity polynomial, which captures the temporal interference correlation. The joint outage probability is used to determine the diversity gain (as the SIR goes to infinity), and it turns out that there is no diversity gain in simple retransmission schemes, even with independent Rayleigh fading over all links. We also determine the complete joint SIR distribution for two transmissions and the distribution of the local delay, which is the time until a repeated transmission over the reference link succeeds.

cs.IT↗

arXiv2013

Pseudocodewords from Bethe Permanents

It was recently conjectured that a vector with components equal to the Bethe permanent of certain submatrices of a parity-check matrix is a pseudocodeword. In this paper we prove a stronger version of this conjecture for some important cases and investigate the families of pseudocodewords obtained by using the Bethe permanent. We also highlight some interesting properties of the permanent of block matrices and their effects on pseudocodewords.

cs.IT↗

arXiv2011

LDPC Codes for Compressed Sensing

We present a mathematical connection between channel coding and compressed sensing. In particular, we link, on the one hand, \emph{channel coding linear programming decoding (CC-LPD)}, which is a well-known relaxation o maximum-likelihood channel decoding for binary linear codes, and, on the other hand, \emph{compressed sensing linear programming decoding (CS-LPD)}, also known as basis pursuit, which is a widely used linear programming relaxation for the problem of finding the sparsest solution of an under-determined system of linear equations. More specifically, we establis a tight connection between CS-LPD based on a zero-one measurement matrix over the reals and CC-LPD of the binary linear channel code that is obtained by viewing this measurement matrix as a binary parity-check matrix. This connection allows the translation of performance guarantees from one setup to the other. The main message of this paper is that parity-check matrices of "good" channel codes can be used as provably "good" measurement matrices under basis pursuit. In particular, we provide the first deterministic construction of compressed sensing measurement matrices with an order-optimal number of rows using high-girth low-density parity-check (LDPC) codes constructed by Gallager.

cs.IT↗

arXiv2011

Decoding of Convolutional Codes over the Erasure Channel

In this paper we study the decoding capabilities of convolutional codes over the erasure channel. Of special interest will be maximum distance profile (MDP) convolutional codes. These are codes which have a maximum possible column distance increase. We show how this strong minimum distance condition of MDP convolutional codes help us to solve error situations that maximum distance separable (MDS) block codes fail to solve. Towards this goal, we define two subclasses of MDP codes: reverse-MDP convolutional codes and complete-MDP convolutional codes. Reverse-MDP codes have the capability to recover a maximum number of erasures using an algorithm which runs backward in time. Complete-MDP convolutional codes are both MDP and reverse-MDP codes. They are capable to recover the state of the decoder under the mildest condition. We show that complete-MDP convolutional codes perform in certain sense better than MDS block codes of the same rate over the erasure channel.

cs.IT↗

arXiv2011

Quasi-Cyclic LDPC Codes: Influence of Proto- and Tanner-Graph Structure on Minimum Hamming Distance Upper Bounds

Quasi-cyclic (QC) low-density parity-check (LDPC) codes are an important instance of proto-graph-based LDPC codes. In this paper we present upper bounds on the minimum Hamming distance of QC LDPC codes and study how these upper bounds depend on graph structure parameters (like variable degrees, check node degrees, girth) of the Tanner graph and of the underlying proto-graph. Moreover, for several classes of proto-graphs we present explicit QC LDPC code constructions that achieve (or come close to) the respective minimum Hamming distance upper bounds. Because of the tight algebraic connection between QC codes and convolutional codes, we can state similar results for the free Hamming distance of convolutional codes. In fact, some QC code statements are established by first proving the corresponding convolutional code statements and then using a result by Tanner that says that the minimum Hamming distance of a QC code is upper bounded by the free Hamming distance of the convolutional code that is obtained by "unwrapping" the QC code.

cs.IT↗

arXiv2010

Deriving Good LDPC Convolutional Codes from LDPC Block Codes

Low-density parity-check (LDPC) convolutional codes are capable of achieving excellent performance with low encoding and decoding complexity. In this paper we discuss several graph-cover-based methods for deriving families of time-invariant and time-varying LDPC convolutional codes from LDPC block codes and show how earlier proposed LDPC convolutional code constructions can be presented within this framework. Some of the constructed convolutional codes significantly outperform the underlying LDPC block codes. We investigate some possible reasons for this "convolutional gain," and we also discuss the --- mostly moderate --- decoder cost increase that is incurred by going from LDPC block to LDPC convolutional codes.

cs.IT↗

arXiv2010

Quasi-Cyclic Asymptotically Regular LDPC Codes

Families of "asymptotically regular" LDPC block code ensembles can be formed by terminating (J,K)-regular protograph-based LDPC convolutional codes. By varying the termination length, we obtain a large selection of LDPC block code ensembles with varying code rates, minimum distance that grows linearly with block length, and capacity approaching iterative decoding thresholds, despite the fact that the terminated ensembles are almost regular. In this paper, we investigate the properties of the quasi-cyclic (QC) members of such an ensemble. We show that an upper bound on the minimum Hamming distance of members of the QC sub-ensemble can be improved by careful choice of the component protographs used in the code construction. Further, we show that the upper bound on the minimum distance can be improved by using arrays of circulants in a graph cover of the protograph.

cs.IT↗

arXiv2009

Spectral Graph Analysis of Quasi-Cyclic Codes

In this paper we analyze the bound on the additive white Gaussian noise channel (AWGNC) pseudo-weight of a (c,d)-regular linear block code based on the two largest eigenvalues of H^T H. In particular, we analyze (c,d)-regular quasi-cyclic (QC) codes of length rL described by J x L block parity-check matrices with circulant block entries of size r x r. We proceed by showing how the problem of computing the eigenvalues of the rL x rL matrix H^T H can be reduced to the problem of computing eigenvalues for r matrices of size L x L. We also give a necessary condition for the bound to be attained for a circulant matrix H and show a few classes of cyclic codes satisfying this criterion.

cs.IT↗