arXiv subjects

Roxanne Ligi

Publications and source records attributed to Roxanne Ligi.

17 recordsLinked to original sources

arXiv2026

Laboratory characterization of Hierarchical Fringe Tracking

One of the main limitations in long-baseline interferometry lies in its fringe tracking sensitivity. The challenge is therefore to maximize this sensitivity while minimizing the spreading of the signal on the detector. This is the goal at the core of the hierarchical fringe tracking (HFT) concept. We present the laboratory characterization of the $2^{nd}$ generation HFT chips operating in the near infrared (H band) for up to 4 telescopes with more linear phase and group delay estimators, allowing a strong simplification of the tracking algorithm. We show a comparison between theoretical intensity outputs for an optimized phase delay chip, and the laboratory measurements of two chips with different designs. The results do not reach the expectations but get close to them with the 10-outputs chip. Ultimately, this new chip is intended for implementation on the VLTI, CHARA or on the future Xuyi 100m-baseline Stellar Interferometer using three telescopes.

astro-ph.IM↗

arXiv2026

Interferometric Survey of Stellar Parameters: Towards homogeneous FGK stars parameters and surface-brightness color relation in the context of PLATO space mission

The estimation of stellar angular diameters can be performed from the surface brightness - color relation (SBCR) and photometry. The SBCR have been considered by the PLATO space mission as an independent empirical alternative for estimating stellar radii of FGK stars. In this context, we have implemented an homogeneous approach not only for calibrating the SBCR for FGK-IV/V stars but, also for determining their fundamental parameters in order to place the stars reliably on the HR diagram and to study their impact on the SBCR. We have performed interferometric observations of 18 quiescent FGK-IV/V stars in the Gaia color range of $3.088 \leq G \leq 5.498$. For the first time, we used 3 different interferometers operating in the $R$, $H$ , and $K$ bands to measure polychromatic limb-darkened angular diameters (LDAD). In parallel, by using public domain spectra we have estimated the stellar parameters ($T_{eff}$, $log g$ and Z) by using the open python tool iSpec. We achieved an average accuracy of 2.3% for the LDAD based on polychromatic observations. However, we have observed that our SBCR does not follow the calibration of the relation between surface brightness and color in Gaia found in the literature. Furthermore, we found that $log g$ and $Z$ have no impact on the SBC relation; given the characteristics of our sample of quiescent stars, it constitutes an ideal set of targets for conducting a new SBCR calibration within the framework of the PLATO space mission. In this context, we reported a SBCR calibration with $σ_{RMS} = $ 0.012, 0.009, 0.009 in the $G, G_{BP}$ and $G_{RP}$ Gaia bands, respectively. This article is part of a series of papers reporting the first results obtained using a polychromatic approach to measure LDAD, employing a fully homogeneous methodology for both determining the fundamental parameters of stars and measuring the LDAD, $θ_{LD}$.

astro-ph.SR↗

arXiv2026

Characterization and on-sky testing of photonic, AWG-based astronomical spectrographs

Astrophotonics is a field that intends to meet the needs of next-generation instruments at a small footprint, low cost, and high stability, compared to bulk-optics-based alternatives. Much development effort is driven by the stringent requirements of direct detection and characterization of exoplanets. Our team works in characterizing Arrayed-Waveguide Grating (AWG) chips for photonics-based, high-resolution, near infrared spectro-interferometry. AWG spectrographs allow to test the feasibility of photonic spectro-interferometers for exoplanet characterization, another step towards fully photonic instruments for astronomy. We present the current status of our AWG characterization and a preliminary on-sky qualification campaign at the PAPYRUS AO system. We present the CoLiBRIS-AWG spectrograph prototype built for on-sky testing, and preliminary results using our high-resolution (H band, R~18000) AWG for observations of Arcturus (alpha Boötes) and Betelgeuse (alpha Orionis). This work contributes to assessing the capabilities of photonic spectroscopy for the development of future compact instruments.

astro-ph.IM↗

arXiv2025

The Gaia spectroscopic catalogue of exoplanets and host stars

Complete, accurate, and precise catalogues of exoplanet host star (EHS) properties are essential to deriving high-quality exoplanet parameters. This paper aims at homogeneously parameterising EHS and their exoplanets, using Gaia and GSP-spec data. For 2573 EHS, we computed their L*, R*, and M*, with no prior assumption from stellar evolution models. Their Galactic positions, kinematic and orbital properties were derived. We re-scaled Mp and Rp of 3556 exoplanets, fully consistently with the stellar data. These new stellar Teff, L*, and R* are in rather good agreement with literature values but are more precise. In particular, R* are derived with typically less than 3% uncertainty; this reduces the uncertainty on Rp significantly and allows for a finer analysis of the decrease in the number of planets around the evaporation valley. Larger differences, however, were found for M*. We note that the EHS population is rather diverse in terms of the chemical and Galactic properties, although they are all found in the Solar vicinity, close to the Local spiral arm. Most EHS belong to the thin disc, but some older thick disc and halo members have also been identified. For the less massive planets, the average Rp increases with the metallicity of the host star. For giant planets, a dichotomy between dense and inflated planets is found. Denser planets tend to be more massive as the metallicity of the host star increases, while inflated planets are more massive for less metallic hosts. If confirmed, this bimodality implies that the diversity of giant exoplanets depends on their Galactic birth locus, with dense giant planets being more numerous than inflated ones when [M/H]>~1.5 times Solar, as in the central Milky Way regions. The Gaia spectroscopic catalogue of exoplanets and their host stars is large, homogeneous, and precise. It would be a useful added-value for planetary studies.

astro-ph.EP↗

arXiv2023

High-contrast detection of exoplanets with a kernel-nuller at the VLTI

Context: The conventional approach to direct imaging has been the use of a single aperture coronagraph with wavefront correction via extreme adaptive optics. Such systems are limited to observing beyond an inner working (IWA) of a few $\mathitλ/D$. Nulling interferometry with two or more apertures will enable detections of companions at separations at and beyond the formal diffraction limit. Aims: This paper evaluates the astrophysical potential of a kernel-nuller as the prime high-contrast imaging mode of the Very Large Telescope Interferometer (VLTI). Methods: By taking into account baseline projection effects which are induced by Earth rotation, we introduce some diversity in the response of the nuller as a function of time. This response is depicted by transmission maps. We also determine whether we can extract the astrometric parameters of a companion from the kernel outputs, which are the primary intended observable quantities of the kernel-nuller. This then leads us to comment on the characteristics of a possible observing program for the discovery of exoplanets. Results: We present transmission maps for both the raw nuller outputs and their subsequent kernel outputs. To further examine the properties of the kernel-nuller, we introduce maps of the absolute value of the kernel output. We also identify 38 targets for the direct detection of exoplanets with a kernel-nuller at the focus of the VLTI. Conclusions: With continued upgrades of the VLTI infrastructure that will reduce fringe tracking residuals, a kernel-nuller would enable the detection of young giant exoplanets at separations < 10 AU, where radial velocity and transit methods are more sensitive.

astro-ph.IM↗

arXiv2022

CHARA/SPICA: a 6-telescope visible instrument for the CHARA Array

With a possible angular resolution down to 0.1-0.2 millisecond of arc using the 330 m baselines and the access to the 600-900 nm spectral domain, the CHARA Array is ideally configured for focusing on precise and accurate fundamental parameters of stars. CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) aims at performing a large survey of stars all over the Hertzsprung-Russell diagram. This survey will also study the effects of the different kinds of variability and surface structure on the reliability of the extracted fundamental parameters. New surface-brightness-colour relations will be extracted from this survey, for general purposes on distance determination and the characterization of faint stars. SPICA is made of a visible 6T fibered instrument and of a near-infrared fringe sensor. In this paper, we detail the science program and the main characteristics of SPICA-VIS. We present finally the initial performance obtained during the commissioning.

astro-ph.IM↗

arXiv2022

Statistical tests with multi-wavelength Kernel-phase analysis for the detection and characterization of planetary companions

Kernel phase is a method to interpret stellar point source images by considering their formation as the analytical result of an interferometric process. Using Fourier formalism, this method allows for observing planetary companions around nearby stars at separations down to half a telescope resolution element, typically 20\,mas for a 8\,m class telescope in H band. The Kernel-phase analysis has so far been mainly focused on working with a single monochromatic light image, recently providing theoretical contrast detection limits down to $10^{-4}$ at 200\,mas with JWST/NIRISS in the mid-infrared by using hypothesis testing theory. In this communication, we propose to extend this approach to data cubes provided by integral field spectrographs (IFS) on ground-based telescopes with adaptive optics to enhance the detection of planetary companions and explore the spectral characterization of their atmosphere by making use of the Kernel-phase multi-spectral information. Using ground-based IFS data cube with a spectral resolution R=20, we explore different statistical tests based on kernel phases at three wavelengths to estimate the detection limits for planetary companions. Our tests are first conducted with synthetic data before extending their use to real images from ground-based exoplanet imagers such as Subaru/SCExAO and VLT/SPHERE in the near future. Future applications to multi-wavelength data from space telescopes are also discussed for the observation of planetary companions with JWST.

astro-ph.IM↗

arXiv2022

3-beam self-calibrated Kernel nulling photonic interferometer

The use of interferometric nulling for the direct characterization of extrasolar planets is an exciting prospect, but one that faces many practical challenges when deployed on telescopes. The largest limitation is the extreme sensitivity of nullers to any residual optical path differences between the incoming telescope beams even after adaptive optics or fringe-tracker correction. The recently proposed kernel-nulling architecture attempts to alleviate this by producing the destructive interference required for nulling, in a scheme whereby self-calibrated observables can be created efficiently, in effect canceling out residual atmospheric piston terms. Here we experimentally demonstrate for the first time a successful creation of self-calibrated kernel-null observables for nulling interferometry in the laboratory. We achieved this through the use of a purpose-built photonic integrated device, containing a multimode interference coupler that creates one bright, and two nulled outputs when injected with three co-phased telescope beams. The device produces the nulled outputs in a way that, by the subtraction of the measured output flux, create a single self-calibrated kernel-null. We experimentally demonstrate the extraction of kernel-nulls for up to 200 nm induced piston error using a laboratory test-bench at a wavelength of 1.55 μm. Further, we empirically demonstrate the kernel-null behaviour when injected with a binary companion analogue equivalent to a 2.32 mas separation at a contrast of 10^{-2}, under 100 nm RMS upstream piston residuals.

astro-ph.IM↗

arXiv2021

Directly Determined Properties of HD 97658 from Interferometric Observations

We conducted interferometric observations with the CHARA Array of transiting super-Earth host HD 97658 and measured its limb-darkened angular diameter to be $θ_{\text{LD}}=0.314\pm0.004$ mas. The combination of the angular diameter with the Gaia EDR3 parallax value with zero-point correction ($π=46.412\pm0.022$ mas, $d=21.546\pm0.011$ pc) yields a physical radius of $R_\star=0.728\pm0.008$ $R_\odot$. We also measured the bolometric flux of the star to be $F_\text{bol}=2.42\pm 0.05\times 10^{-8}$erg s$^{-1}$ cm$^{-2}$, which, together with angular size, allows a measurement of the effective temperature $T_{\text{eff}}=5212\pm43$ K. Our directly determined physical stellar properties are in good agreement with previous estimates derived from spectroscopy. We used our measurements in combination with stellar evolutionary models and properties of the transit of HD 97658 b to determine the mass and age of HD 97658 as well as constrain the properties of the planet. Our results and our analysis of the TESS lightcurve on the planet (TOI-1821) corroborate previous studies of this system with tighter uncertainties.

astro-ph.SR↗

arXiv2019

From the stellar properties of HD219134 to the internal compositions of its transiting exoplanets

The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of $R_{\star}=0.726\pm0.014 R_{\odot}$. We also derived the stellar density from the transits light curves ($ρ_{\star}=1.82\pm0.19 ρ_{\odot}$), which finally gives a direct estimate of the mass ($M_{\star}=0.696\pm0.078 M_{\odot}$) with a correlation of 0.46 between $R_{\star}$ and $M_{\star}$. This new mass is smaller than that derived from the C2kSMO stellar evolutionary model, which provides a mass range of 0.755$-$0.810 ($\pm 0.040$) $M_{\odot}$. This allows us to infer the mass, radius and density of the two transiting exoplanets of the system. We then use an inference model to obtain the internal parameters of these two transiting exoplanets. Moreover, we find that planet $b$ and $c$ have smaller radii than previously estimated ($1.500\pm0.057$ and $1.415\pm0.049 R_{\oplus}$, respectively); this clearly puts these planets out of the gap in the exoplanetary radii distribution and validates their super-Earth nature. Planet $b$ is more massive than planet $c$, but possibly less dense. We investigate whether this could be caused by partial melting of the mantle and find that tidal heating due to non-zero eccentricity of planet $b$ may be powerful enough. The system of HD219134 constitutes a very valuable benchmark for both stellar physics and exoplanetary science. The direct determination of the stellar density, radius and mass should be more extensively applied to provide accurate exoplanets properties and calibrate stellar models.

astro-ph.EP↗

arXiv2018

Mass, radius, and composition of the transiting planet 55 Cnc e : using interferometry and correlations

The characterization of exoplanets relies on that of their host star. However, stellar evolution models cannot always be used to derive the mass and radius of individual stars, because many stellar internal parameters are poorly constrained. Here, we use the probability density functions (PDFs) of directly measured parameters to derive the joint PDF of the stellar and planetary mass and radius. Because combining the density and radius of the star is our most reliable way of determining its mass, we find that the stellar (respectively planetary) mass and radius are strongly (respectively moderately) correlated. We then use a generalized Bayesian inference analysis to characterize the possible interiors of 55 Cnc e. We quantify how our ability to constrain the interior improves by accounting for correlation. The information content of the mass-radius correlation is also compared with refractory element abundance constraints. We provide posterior distributions for all interior parameters of interest. Given all available data, we find that the radius of the gaseous envelope is $0.08 \pm 0.05 R_p$. A stronger correlation between the planetary mass and radius (potentially provided by a better estimate of the transit depth) would significantly improve interior characterization and reduce drastically the uncertainty on the gas envelope properties.

astro-ph.EP↗

arXiv2018

K2 Targets Observed with SPHERE/VLT: An M4-7 Dwarf Companion Resolved around EPIC 206011496

The quest to discover exoplanets is one of the most important missions in astrophysics, and is widely performed using the transit method, which allows for the detection of exoplanets down to the size of Mercury. However, to confirm these detections, additional vetting is mandatory. We selected six K2 targets from campaigns #1 to #8 that show transit light curves corresponding to Earth-sized to Neptune-sized exoplanets. We aim to discard some scenarios that could mimic an exoplanetary transit, leading to a misinterpretation of the data. We performed direct imaging observations using the SPHERE/VLT instrument to probe the close environment of these stars. For five of the K2 targets, we report no detection and we give the detection limits. For EPIC 206011496, we detect a 0.38 $\pm$ 0.06 $M_{\odot}$ companion at a separation of 977.12 $\pm$ 0.73 mas (140.19 $\pm$ 0.11 au). The spectral analysis corresponds to an M4-7 star, and the analysis of the proper motion shows that it is bounded to the primary star. EPIC 206011496 also hosts an Earth-like planetary candidate. If it transits the primary star, its radius is consistent with that of a super-Earth. However, if it transits the companion star, it falls into the mini-Neptune regime.

astro-ph.EP↗

arXiv2018

Mass, radius, and composition of the transiting planet 55 Cnc e : using interferometry and correlations --- A quick update

In a recent paper (Crida et al. 2018, accepted on April 19), we presented a method to derive the mass and radius of a transiting exoplanet and their intrinsic correlation, that we applied to 55 Cnc e. We wrote: "More precise observations of the transit would be very useful in this particular case and would allow to increase significantly the gain on the planetary density precision." Three months later, Bourrier et al. (2018) published new observations of the system. Additionally, Gaia's DR2 was released on April 25, 2018. The purpose of this research note is solely to implement these precise new data in our pipeline to provide an up-to-date result of our model. We find $R_p = 1.947\pm 0.038\,R_\oplus$ and $M_p = 8.59\pm 0.43\,M_\oplus$. We also double the precision on the planetary density ($ρ_p = 1.164\pm 0.062\,ρ_\oplus$), which allows us to refine the estimates for all interior parameters of interest. In particular, we now find that the radius of the gaseous envelope is $0.03\pm 0.02\,R_p$.

astro-ph.EP↗

arXiv2017

Science cases for a visible interferometer

High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of developing strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.

astro-ph.SR↗

arXiv2016

Radii, masses, and ages of 18 bright stars using interferometry and new estimations of exoplanetary parameters

Accurate stellar parameters are needed in numerous domains of astrophysics. The position of stars on the H-R diagram is an important indication of their structure and evolution, and it helps improve stellar models. Furthermore, the age and mass of stars hosting planets are required elements for studying exoplanetary systems. We aim at determining accurate parameters of a set of 18 bright exoplanet host and potential host stars from interferometric measurements, photometry, and stellar models. Using the VEGA/CHARA interferometer, we measured the angular diameters of 18 stars, ten of which host exoplanets. We combined them with their distances to estimate their radii. We used photometry to derive their bolometric flux and, then, their effective temperature and luminosity to place them on the H-R diagram. We then used the PARSEC models to derive their best fit ages and masses, with error bars derived from MC calculations. Our interferometric measurements lead to an average of 1.9% uncertainty on angular diameters and 3% on stellar radii. There is good agreement between measured and indirect estimations of angular diameters (from SED fitting or SB relations) for MS stars, but not as good for more evolved stars. For each star, we provide a likelihood map in the mass-age plane; typically, two distinct sets of solutions appear (an old and a young age). The errors on the ages and masses that we provide account for the metallicity uncertainties, which are often neglected by other works. From measurements of its radius and density, we also provide the mass of 55 Cnc independently of models. From the stellar masses, we provide new estimates of semi-major axes and minimum masses of exoplanets with reliable uncertainties. We also derive the radius, density, and mass of 55 Cnc e, a super-Earth that transits its stellar host. Our exoplanetary parameters reflect the known population of exoplanets.

astro-ph.SR↗

arXiv2014

Planet transit and stellar granulation detection with interferometry

Aims. We used realistic three-dimensional (3D) radiative hydrodynamical (RHD) simulations from the Stagger-grid and synthetic images computed with the radiative transfer code Optim3D to provide interferometric observables to extract the signature of stellar granulation and transiting planets. Methods. We computed intensity maps from RHD simulations for twelve interferometric instruments covering wavelengths ranging from optical to infrared. The stellar surface asymmetries in the brightness distribution mostly affect closure phases. We compared the closure phases of the system star with a transiting planet and the star alone and considered the impact of magnetic spots constructing a hypothetical starspots image. Results. All the simulations show departure from the axisymmetric case at all wavelengths. We presented two possible targets (Beta Com and Procyon) and found that departures up to 16 deg can be detected on the 3rd lobe and higher. In particular, MIRC is the most appropriate instrument because it combines good UV coverage and long baselines. Moreover, we explored the impact of convection on interferometric planet signature for three prototypes of planets. It is possible to disentangle the signature of the planet at particular wavelengths (either in the infrared or in the optical) by comparing the closure phases of the star at difference phases of the planetary transit. Conclusions. The detection and characterisation of planets must be based on a comprehensive knowledge of the host star; this includes the detailed study of the stellar surface convection with interferometric techniques. In this context, RHD simulations are crucial to reach this aim. We emphasize that interferometric observations should be pushed at high spatial frequencies by accumulating observations on closure phases at short and long baselines.

astro-ph.SR↗

arXiv2014

The operation of VEGA/CHARA : from the scientific idea to the final products

We describe the data flow in the operation of the VEGA/CHARA instrument. After a brief summary of the main characteristics and scientific objectives of the VEGA instrument, we explain the standard procedure from the scientific idea up to the execution of the observation. Then, we describe the different steps done after the observation, from the raw data to the archives and the final products. Many tools are used and we show how the Virtual Observatory principles have been implemented for the interoperability of these software and databases.

astro-ph.IM↗