arXiv subjects

Rui Franqueira Ximenes

Publications and source records attributed to Rui Franqueira Ximenes.

6 recordsLinked to original sources

arXiv2026

Design and modeling of a liquid-lead dump concept for beamstrahlung radiation absorption in the CERN Future Circular e$^+$e$^-$ Collider

The electron-positron Future Circular Collider (FCC-ee) being developed at CERN will generate intense beamstrahlung radiation, thus requiring photon absorbers downstream of the interaction points. This work presents the conceptual design of flowing-liquid-lead absorbers capable of dissipating around 370 kW of photon power, with a mean photon energy of 62 MeV. Two configurations are investigated: an inclined-flow geometry, developed to increase the photon interaction length to maximize absorption, and a compact upstream slope with an additional pool, in which a free-surface lead flow intercepts the power peak before a downstream pool dissipates the remaining load. Photon-matter interactions are modeled using Monte Carlo simulations in fluka, while conjugate heat-transfer and free-surface dynamics are analyzed through computational-fluid-dynamics simulations using ansys fluent. Design refinements are introduced based on the simulated thermal and hydraulic performance and to mitigate secondary effects such as photon backscattering. Both configurations demonstrate stable operation within the 300 kg/s flow limit and maintain liquid-lead and structural temperatures within the operational range of 450--500 $^{\circ}$C. The results establish circulating liquid lead as a feasible and thermally robust baseline technology for beamstrahlung absorption in FCC-ee.

physics.acc-ph↗

arXiv2024

Post-irradiation examination of a prototype tantalum-clad target for the Beam Dump Facility at CERN

The Beam Dump Facility (BDF) is a planned fixed-target installation in CERN's North Area, set to start operating in 2031. A proton beam of 400 GeV/c will be delivered in 1 s pulses of 4e13 protons every 7.2 s, amounting to 4e19 protons on target (PoT) per year, with an average thermal power deposition of 305 kW. The experiment requires high-Z and high-density materials and involves challenging thermomechanical conditions; hence, a water-cooled refractory metal core is proposed. To prevent corrosion and erosion, the target materials - tungsten and a molybdenum-based alloy, TZM-, are clad with a tantalum alloy using hot isostatic pressing. To verify the reliability of the target design and manufacturing process, a reduced-scale prototype target was manufactured and irradiated with 2.4e16 PoT in 2018. This paper presents the findings of the post-irradiation examination (PIE) conducted 2.5 years later. The PIE consisted of non-destructive and destructive activities, including film imaging, microscopy, metrology, ultrasonic testing, microstructural analysis, and mechanical and thermal characterization. No irradiation effects resulting from thermal stresses, such as geometrical changes or cracks in the cladding, were observed, and it was determined that the bonding between the core and cladding materials was robust. Moreover, no changes were detected in the microstructures or mechanical properties of the bulk materials. In conclusion, the robustness of the target baseline design and manufacturing process was confirmed, validating its suitability for operating under the desired conditions. Nonetheless, the observed brittleness of sintered tungsten indicates a potential area for improvement to enhance the lifetime of the BDF target. Overall, the examinations provided valuable insights into the performance of the prototype and indicated potential refinements for the future BDF target complex.

physics.acc-ph↗

arXiv2024

Exploring diffusion bonding of niobium and its alloys with tungsten and a molybdenum alloy for high-energy particle target applications

Particle-producing targets in high-energy research facilities are often made from refractory metals, and they typically require dedicated cooling systems due to the challenging thermomechanical conditions they experience. However, direct contact of water with target blocks can induce erosion, corrosion, and embrittlement, especially of tungsten (W). One approach to overcoming this problem is cladding the blocks with tantalum (Ta). Unfortunately, Ta generates high decay heat when irradiated, raising safety concerns in the event of a loss-of-cooling accident. This study explored the capacity of niobium (Nb) and its alloys to form diffusion bonds with W and TZM (a molybdenum alloy with titanium and zirconium). This is because the Beam Dump Facility (BDF), a planned new fixed-target installation in CERN's North Area, uses these target materials. The bonding quality of pure Nb, Nb1Zr, and C103 (a Nb alloy with 10% hafnium and 1% titanium) with TZM and W obtained using hot isostatic pressing (HIP) was evaluated. The effects of different HIP temperatures and the introduction of a Ta interlayer were examined. Optical microscopy indicated promising bonding interfaces, which were further characterized using tensile tests and thermal-diffusivity measurements. Their performance under high-energy beam impact was validated using thermomechanical simulations. C103 exhibited higher interface strengths and safety factors than Ta2.5W, positioning it as a potential alternative cladding material for the BDF production target. The findings highlight the viability of Nb-based materials, particularly C103, for improving operational safety and efficiency in fixed-target physics experiments; however, considerations regarding the long half-life of 94Nb require further attention.

cond-mat.mtrl-sci↗

arXiv2023

FIB-SEM investigation and uniaxial compression of flexible graphite

Flexible graphite (FG) with 1 - 1.2 g/cm$^3$ density is employed as beam energy absorber material in the CERN's Large Hadron Collider (LHC) beam dumping system. However, the increase of energy deposited expected for new HL-LHC (High-Luminosity LHC) design demanded for an improvement in reliability and safety of beam dumping devices, and the need for a calibrated material model suitable for high-level FE simulations has been prioritized. This work sets the basic knowledge to develop a material model for FG suitable to this aim. A review of the FG properties available in literature is first given, followed by FIB-SEM (Focused Ion Beam - Scanning Electron Microscopy) microstructure investigation and monotonic and cyclic uniaxial compression tests. Similarities with other well-known groups of materials such as crushable foams, crumpled materials and compacted powders have been discussed. A simple 1D phenomenological model has been used to fit the experimental stress-strain curves and the accuracy of the result supports the assumptions that the graphite-like microstructure and the crumpled meso-structure play the major role under out-of-plane uniaxial compression.

physics.acc-ph↗

arXiv2022

Study of alternative locations for the SPS Beam Dump Facility

As part of the main focus of the BDF Working Group in 2021, this document reports on the study of alternative locations and possible optimisation that may accompany the reuse of existing facilities with the aim of significantly reducing the costs of the facility. Building on the BDF/SHiP Comprehensive Design Study (CDS), the assessment rests on the generic requirements and constraints that allow preserving the physics reach of the facility by making use of the $4\times 10^{19}$ protons per year at 400\,GeV that are currently not exploited at the SPS and for which no existing facility is compatible. The options considered involve the underground areas TCC4, TNC, and ECN3. Recent improvements of the BDF design at the current location (referred to as `TT90-TCC9-ECN4') are also mentioned together with ideas for yet further improvements. The assessments of the alternative locations compiled the large amount of information that is already available together with a set of conceptual studies that were performed during 2021. The document concludes with a qualitative comparison of the options, summarising the associated benefits and challenges of each option, such that a recommendation can be made about which location is to be pursued. The most critical location-specific studies required to specify the implementation and cost for each option are identified so that the detailed investigation of the retained option can be completed before the end of 2022.

physics.acc-ph↗

arXiv2021

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontally from the target, and the Experimental Area 2 (EAR2), located 20 m above the target. The target, based on pure lead, is impacted by a high-intensity 20-GeV/c pulsed proton beam. The facility was conceived to study neutron-nucleus interactions for neutron kinetic energies between a few meV to several GeV, with applications of interest for nuclear astrophysics, nuclear technology, and medical research. After the second-generation target reached the end of its lifetime, the facility underwent a major upgrade during CERN's Long Shutdown 2 (LS2, 2019-2021), which included the installation of the new third-generation neutron target. The first and second-generation targets were based on water-cooled massive lead blocks and were designed focusing on EAR1, since EAR2 was built later. The new target is cooled by nitrogen gas to avoid erosion-corrosion and contamination of cooling water with radioactive lead spallation products. Moreover, the new design is optimized also for the vertical flight path and EAR2. This paper presents an overview of the target design focused on both physics and thermo-mechanical performance, and includes a description of the nitrogen cooling circuit and radiation protection studies.

physics.ins-det↗