arXiv subjects

Rui Xu

Publications and source records attributed to Rui Xu.

At least 271 records · Page 15Linked to original sources

arXiv2016

Combined search for Lorentz violation in short-range gravity

Short-range experiments testing the gravitational inverse-square law at the submillimeter scale offer uniquely sensitive probes of Lorentz invariance. A combined analysis of results from the short-range gravity experiments HUST-2015, HUST-2011, IU-2012, and IU-2002 permits the first independent measurements of the 14 nonrelativistic coefficients for Lorentz violation in the pure-gravity sector at the level of $10^{-9}$ m$^2$, improving by an order of magnitude the sensitivity to numerous types of Lorentz violation involving quadratic curvature derivatives and curvature couplings.

gr-qc↗

arXiv2016

Deciphering chemical order/disorder and material properties at the single-atom level

Correlating 3D arrangements of atoms and defects with material properties and functionality forms the core of several scientific disciplines. Here, we determined the 3D coordinates of 6,569 iron and 16,627 platinum atoms in a model iron-platinum nanoparticle system to correlate 3D atomic arrangements and chemical order/disorder with material properties at the single-atom level. We identified rich structural variety and chemical order/disorder including 3D atomic composition, grain boundaries, anti-phase boundaries, anti-site point defects and swap defects. We show for the first time that experimentally measured 3D atomic coordinates and chemical species with 22 pm precision can be used as direct input for first-principles calculations of material properties such as atomic magnetic moments and local magnetocrystalline anisotropy. This work not only opens the door to determining 3D atomic arrangements and chemical order/disorder of a wide range of nanostructured materials with high precision, but also will transform our understanding of structure-property relationships at the most fundamental level.

cond-mat.mtrl-sci↗

arXiv2016

Nanomaterial datasets to advance tomography in scanning transmission electron microscopy

Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.

cond-mat.mes-hall↗

arXiv2015

On the Grain-Modified Magnetic Diffusivities in Protoplanetary Disks

Weakly ionized protoplanetary disks (PPDs) are subject to non-ideal-magnetohydrodynamic (MHD) effects including Ohmic resistivity, the Hall effect and ambipolar diffusion (AD), and the resulting magnetic diffusivities ($η_O, η_H$ and $η_A$) largely control the disk gas dynamics. The presence of grains not only strongly reduces disk ionization fraction, but also modify the scalings of $η_H$ and $η_A$ with magnetic field strength. We derive analytically asymptotic expressions of $η_H$ and $η_A$ in both strong and weak field limits and show that towards strong field, $η_H$ can change sign (at a threshold field strength $B_{\rm th}$), mimicking a flip of field polarity, and AD is substantially reduced. Applying to PPDs, we find that when small $\sim0.1$ ($0.01$)$μ$m grains are sufficiently abundant [mass ratio $\sim0.01$ ($10^{-4}$)], $η_H$ can change sign up to $\sim2-3$ scale heights above midplane at modest field strength (plasma $β\sim100$) over a wide range of disk radii. Reduction of AD is also substantial towards the AD dominated outer disk and may activate the magneto-rotational instability. We further perform local non-ideal MHD simulations of the inner disk (within 10 AU) and show that with sufficiently abundant small grains, magnetic field amplification due to the Hall-shear instability saturates at very low level near the threshold field strength $B_{\rm th}$. Together with previous studies, we conclude by discussing the grain-abundance-dependent phenomenology of PPD gas dynamics.

astro-ph.EP↗

arXiv2015

Three-dimensional coordinates of individual atoms in materials revealed by electron tomography

Crystallography, the primary method for determining the three-dimensional (3D) atomic positions in crystals, has been fundamental to the development of many fields of science. However, the atomic positions obtained from crystallography represent a global average of many unit cells in a crystal. Here, we report, for the first time, the determination of the 3D coordinates of thousands of individual atoms and a point defect in a material by electron tomography with a precision of ~19 picometers, where the crystallinity of the material is not assumed. From the coordinates of these individual atoms, we measure the atomic displacement field and the full strain tensor with a 3D resolution of ~1nm^3 and a precision of ~10^-3, which are further verified by density functional theory calculations and molecular dynamics simulations. The ability to precisely localize the 3D coordinates of individual atoms in materials without assuming crystallinity is expected to find important applications in materials science, nanoscience, physics and chemistry.

cond-mat.mtrl-sci↗

arXiv2015

Landau Quantization and Fermi Velocity Renormalization in Twisted Graphene Bilayers

Currently there is a lively discussion concerning Fermi velocity renormalization in twisted bilayers and several contradicted experimental results are reported. Here we study electronic structures of the twisted bilayers by scanning tunneling microscopy (STM) and spectroscopy (STS). The interlayer coupling strengths between the adjacent bilayers are measured according to energy separations of two pronounced low-energy van Hove singularities (VHSs) in the STS spectra. We demonstrate that there is a large range of values for the interlayer interaction in different twisted bilayers. Below the VHSs, the observed Landau quantization in the twisted bilayers is identical to that of massless Dirac fermions in graphene monolayer, which allows us to measure the Fermi velocity directly. Our result indicates that the Fermi velocity of the twisted bilayers depends remarkably on both the twisted angles and the interlayer coupling strengths. This removes the discrepancy about the Fermi velocity renormalization in the twisted bilayers and provides a consistent interpretation of all current data.

cond-mat.mtrl-sci↗

arXiv2015

Short-range gravity and Lorentz violation

Comparatively few searches have been performed for violations of local Lorentz invariance in the pure-gravity sector. We show that tests of short-range gravity are sensitive to a broad class of unconstrained and novel signals that depend on the experimental geometry and on sidereal time.

gr-qc↗

arXiv2015

Electronic Structures and Their Landau Quantizations in Twisted Graphene Bilayer and Trilayer

Electronic structures and their Landau quantizations in twisted graphene bilayer and trilayer are investigated using scanning tunnelling microscopy and spectroscopy. In the twisted trilayer, the top graphene layer and second layer are AB (Bernal) stacking and there is a stacking misorientation between the second layer and third layer. Both the twisted bilayer and trilayer exhibit two pronounced low-energy van Hove singularities (VHSs) in their spectra. Below the VHSs, the observed Landau level quantization in the twisted bilayer is identical to that of massless Dirac fermion in graphene monolayer. Our result demonstrates that both the VHSs and Fermi velocity of the twisted bilayer depends remarkably on the twist angle and the interlayer coupling strength. In the twisted trilayer, we directly observe Landau quantization of massive Dirac fermion with a sizable band gap 105 meV, which results in valley (layer) polarization of the lowest Landau levels. Such a result is similar to the expected Landau quantization in Bernal graphene bilayer with a moderate electric field.

cond-mat.mes-hall↗

arXiv2014

Grain rotation and lattice deformation during photoinduced chemical reactions revealed by in-situ X-ray nanodiffraction

In-situ X-ray diffraction (XRD) and transmission electron microscopy (TEM) have been used to investigate many physical science phenomena, ranging from phase transitions, chemical reaction and crystal growth to grain boundary dynamics. A major limitation of in-situ XRD and TEM is a compromise that has to be made between spatial and temporal resolution. Here, we report the development of in-situ X-ray nanodiffraction to measure atomic-resolution diffraction patterns from single grains with up to 5 millisecond temporal resolution, and make the first real-time observation of grain rotation and lattice deformation during photoinduced chemical reactions. The grain rotation and lattice deformation associated with the chemical reactions are quantified to be as fast as 3.25 rad./sec. and as large as 0.5 Angstroms, respectively. The ability to measure atomic-resolution diffraction patterns from individual grains with several millisecond temporal resolution is expected to find broad applications in materials science, physics, chemistry, and nanoscience.

cond-mat.mtrl-sci↗

arXiv2014

Unveiling the Structural Origin of the High Carrier Mobility of a Molecular Monolayer on Boron Nitride

Very recently, it was demonstrated that the carrier mobility of a molecular monolayer dioctylbenzothienobenzothiophene (C8-BTBT) on boron nitride can reach 10 cm2/Vs, the highest among the previously reported monolayer molecular field-effect transistors. Here we show that the high-quality single crystal of the C8-BTBT monolayer may be the key origin of the record-high carrier mobility. We discover that the C8-BTBT molecules prefer layer-by-layer growth on both hexagonal boron nitride and graphene. The flatness of these substrates substantially decreases the C8-BTBT nucleation density and enables repeatable growth of large-area single crystal of the C8-BTBT monolayer. Our experimental result indicates that only out-of-plane roughness greater than 0.6 nm of the substrates could induce disturbance in the crystal growth and consequently affect the charge transport. This information would be important in guiding the growth of high-quality epitaxy molecular film.

cond-mat.mtrl-sci↗

arXiv2014

Direct Probing Stacking Order and Electronic Spectrum of Rhombohedral Trilayer Graphene with Scanning Tunneling Microscopy

Recently, the rhombohedral trilayer graphene (r-TLG) has attracted much attention because of its low-energy flat bands, which are predicted to result in many strongly correlated phenomena. Here, we demonstrate that it is possible to probe the stacking order and electronic spectrum of the r-TLG directly with a scanning tunneling microscopy around a monoatomic step edge of the top graphene layer. The tunneling spectra of the r-TLG exhibit four adjacent peaks, which are generated by the low-energy flat bands, flanking the charge neutrality point. Based on these spectra, the true energy gap and the energy gap at the K-point of the r-TLG are determined as about 9 meV and 23 meV, respectively. The observed features are well reproduced by a low-energy effective Hamiltonian.

cond-mat.mes-hall↗

arXiv2014

Two-dimensional Quasi-Freestanding Molecular Crystals for High-Performance Organic Field-Effect Transistors

Two-dimensional atomic crystals are extensively studied in recent years due to their exciting physics and device applications. However, a molecular counterpart, with scalable processability and competitive device performance, is still challenging. Here, we demonstrate that high-quality few-layer dioctylbenzothienobenzothiophene molecular crystals can be grown on graphene or boron nitride substrate via van der Waals epitaxy, with precisely controlled thickness down to monolayer, large-area single crystal, low process temperature and patterning capability. The crystalline layers are atomically smooth and effectively decoupled from the substrate due to weak van der Waals interactions, affording a pristine interface for high-performance organic transistors. As a result, monolayer dioctylbenzothienobenzothiophene molecular crystal field-effect transistors on boron nitride show record-high carrier mobility up to 10cm2V-1s-1 and aggressively scaled saturation voltage around 1V. Our work unveils an exciting new class of two-dimensional molecular materials for electronic and optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2014

Three-dimensional coherent X-ray diffraction imaging of a whole, frozen-hydrated cell

A structural understanding of whole cells in three dimensions at high spatial resolution remains a significant challenge and, in the case of X-rays, has been limited by radiation damage. By alleviating this limitation, cryogenic coherent diffraction imaging (cryo-CDI) could bridge the important resolution gap between optical and electron microscopy in bio-imaging. Here, we report for the first time 3D cryo-CDI of a whole, frozen-hydrated cell - in this case a Neospora caninum tachyzoite - using 8 keV X-rays. Our 3D reconstruction reveals the surface and internal morphology of the cell, including its complex, polarized sub-cellular architecture with a 3D resolution of ~75-100 nm, which is presently limited by the coherent X-ray flux and detector size. Given the imminent improvement in the coherent X-ray flux at the facilities worldwide, our work forecasts the possibility of routine 3D imaging of frozen-hydrated cells with spatial resolutions in the tens of nanometres.

physics.bio-ph↗

arXiv2013

Single-shot 3D structure determination of nanocrystals with femtosecond X-ray free electron laser pulses

Coherent diffraction imaging (CDI) using synchrotron radiation, X-ray free electron lasers (X-FELs), high harmonic generation, soft X-ray lasers, and optical lasers has found broad applications across several disciplines. An active research direction in CDI is to determine the structure of single particles with intense, femtosecond X-FEL pulses based on diffraction-before-destruction scheme. However, single-shot 3D structure determination has not been experimentally realized yet. Here we report the first experimental demonstration of single-shot 3D structure determination of individual nanocrystals using ~10 femtosecond X-FEL pulses. Coherent diffraction patterns are collected from high-index-faceted nanocrystals, each struck by a single X-FEL pulse. Taking advantage of the symmetry of the nanocrystal, we reconstruct the 3D structure of each nanocrystal from a single-shot diffraction pattern at ~5.5 nm resolution. As symmetry exists in many nanocrystals and virus particles, this method can be applied to 3D structure studies of such particles at nanometer resolution on femtosecond time scales.

physics.optics↗

arXiv2012

Oversampling smoothness (OSS): an effective algorithm for phase retrieval of noisy diffraction intensities

Coherent diffraction imaging (CDI) is high-resolution lensless microscopy that has been applied to image a wide range of specimens using synchrotron radiation, X-ray free electron lasers, high harmonic generation, soft X-ray laser and electrons. Despite these rapid advances, it remains a challenge to reconstruct fine features in weakly scattering objects such as biological specimens from noisy data. Here we present an effective iterative algorithm, termed oversampling smoothness (OSS), for phase retrieval of noisy diffraction intensities. OSS exploits the correlation information among the pixels or voxels in the region outside of a support in real space. By properly applying spatial frequency filters to the pixels or voxels outside the support at different stage of the iterative process (i.e. a smoothness constraint), OSS finds a balance between the hybrid input-output (HIO) and error reduction (ER) algorithms to search for a global minimum in solution space, while reducing the oscillations in the reconstruction. Both our numerical simulations with Poisson noise and experimental data from a biological cell indicate that OSS consistently outperforms the HIO, ER-HIO and noise robust (NR)-HIO algorithms at all noise levels in terms of accuracy and consistency of the reconstructions. We expect OSS to find application in the rapidly growing CDI field as well as other disciplines where phase retrieval from noisy Fourier magnitudes is needed.

physics.optics↗

arXiv2012

Experimental realization of single electron tunneling diode based on vertical graphene two-barrier junction

Usually, graphene is used in its horizontal directions to design novel concept devices. Here, we report a single electron tunneling diode based on quantum tunneling through a vertical graphene two-barrier junction. The junction is formed by positioning a scanning tunnelling microscopy (STM) tip above a graphene nanoribbon that was deposited on a graphite surface. Because of the asymmetry of the two-barrier junction, the electrons can unidirectional transfer from the tip to the graphene nanoribbon but not from the graphene to the tip. This result opens intriguing opportunities for designing new type of graphene transistors in its vertical direction.

cond-mat.mes-hall↗

arXiv2012

Electron tomography at 2.4 Å resolution

Transmission electron microscopy (TEM) is a powerful imaging tool that has found broad application in materials science, nanoscience and biology(1-3). With the introduction of aberration-corrected electron lenses, both the spatial resolution and image quality in TEM have been significantly improved(4,5) and resolution below 0.5 Å has been demonstrated(6). To reveal the 3D structure of thin samples, electron tomography is the method of choice(7-11), with resolutions of ~1 nm^3 currently achievable(10,11). Recently, discrete tomography has been used to generate a 3D atomic reconstruction of a silver nanoparticle 2-3 nm in diameter(12), but this statistical method assumes prior knowledge of the particle's lattice structure and requires that the atoms fit rigidly on that lattice. Here we report the experimental demonstration of a general electron tomography method that achieves atomic scale resolution without initial assumptions about the sample structure. By combining a novel projection alignment and tomographic reconstruction method with scanning transmission electron microscopy, we have determined the 3D structure of a ~10 nm gold nanoparticle at 2.4 Å resolution. While we cannot definitively locate all of the atoms inside the nanoparticle, individual atoms are observed in some regions of the particle and several grains are identified at three dimensions. The 3D surface morphology and internal lattice structure revealed are consistent with a distorted icosahedral multiply-twinned particle. We anticipate that this general method can be applied not only to determine the 3D structure of nanomaterials at atomic scale resolution(13-15), but also to improve the spatial resolution and image quality in other tomography fields(7,9,16-20).

cond-mat.mtrl-sci↗

arXiv2011

3D Imaging of a Phase Object from a Single Sample Orientation Using an Optical Laser

Ankylography is a new 3D imaging technique, which, under certain circumstances, enables reconstruction of a 3D object from a single sample orientation. Here, we provide a matrix rank analysis to explain the principle of ankylography. We then present an ankylography experiment on a microscale phase object using an optical laser. Coherent diffraction patterns are acquired from the phase object using a planar CCD detector and are projected onto a spherical shell. The 3D structure of the object is directly reconstructed from the spherical diffraction pattern. This work may potentially open the door to a new method for 3D imaging of phase objects in the visible light region. Finally, the extension of ankylography to more complicated and larger objects is suggested.

physics.optics↗