arXiv subjects

Rui Zhang

Publications and source records attributed to Rui Zhang.

At least 955 records · Page 53Linked to original sources

arXiv2021

Double-IRS Assisted Multi-User MIMO: Cooperative Passive Beamforming Design

Intelligent reflecting surface (IRS) has emerged as an enabling technology to achieve smart and reconfigurable wireless communication environment cost-effectively. Prior works on IRS mainly consider its passive beamforming design and performance optimization without the inter-IRS signal reflection, which thus do not unveil the full potential of multi-IRS assisted wireless networks. In this paper, we study a double-IRS assisted multi-user communication system with the \emph{cooperative} passive beamforming design that captures the multiplicative beamforming gain from the inter-IRS channel. Under the general channel setup with the co-existence of both double- and single-reflection links, we jointly optimize the (active) receive beamforming at the base station (BS) and the cooperative (passive) reflect beamforming at the two distributed IRSs (deployed near the BS and users, respectively) to maximize the minimum signal-to-interference-plus-noise ratio (SINR) of all users. Moreover, for the single-user and multi-user setups, we analytically show the superior performance of the double-IRS cooperative system over the conventional single-IRS system in terms of the maximum signal-to-noise ratio (SNR) and multi-user effective channel rank, respectively. Simulation results validate our analytical results and show the practical advantages of the proposed double-IRS system with cooperative passive beamforming designs.

cs.IT↗

arXiv2021

Transforming Fading Channel from Fast to Slow: IRS-Assisted High-Mobility Communication

In this paper, we study a new intelligent refracting surface (IRS)-assisted high-mobility communication with the IRS deployed in a high-speed moving vehicle to assist its passenger's communication with a static base station (BS) on the roadside. The vehicle's high Doppler frequency results in a fast fading channel between the BS and the passenger/user, which renders channel estimation for the IRS with a large number of refracting elements a more challenging task as compared to the conventional case with low-mobility users only. In order to mitigate the Doppler effect and reap the full IRS passive beamforming gain with low training overhead, we propose a new and efficient transmission protocol to execute channel estimation and IRS refraction design for data transmission. Specifically, by exploiting the quasi-static channel between the IRS and user both moving at the same high speed, we first estimate the cascaded BS-IRS-user channel with the Doppler effect compensated. Then, we estimate the instantaneous BS-user fast fading channel (without IRS refraction) and tune the IRS refraction over time accordingly to align the cascaded channel with the BS-user direct channel, thus maximizing the IRS's passive beamforming gain as well as converting their combined channel from fast to slow fading. Simulation results show the effectiveness of the proposed channel estimation scheme and passive beamforming design as compared to various benchmark schemes.

cs.IT↗

arXiv2021

Exploiting Amplitude Control in Intelligent Reflecting Surface Aided Wireless Communication with Imperfect CSI

Intelligent reflecting surface (IRS) is a promising new paradigm to achieve high spectral and energy efficiency for future wireless networks by reconfiguring the wireless signal propagation via passive reflection. To reap the potential gains of IRS, channel state information (CSI) is essential, whereas channel estimation errors are inevitable in practice due to limited channel training resources. In this paper, in order to optimize the performance of IRS-aided multiuser systems with imperfect CSI, we propose to jointly design the active transmit precoding at the access point (AP) and passive reflection coefficients of IRS, each consisting of not only the conventional phase shift and also the newly exploited amplitude variation. First, the achievable rate of each user is derived assuming a practical IRS channel estimation method, which shows that the interference due to CSI errors is intricately related to the AP transmit precoders, the channel training power and the IRS reflection coefficients during both channel training and data transmission. Then, for the single-user case, by combining the benefits of the penalty method, Dinkelbach method and block successive upper-bound minimization (BSUM) method, a new penalized Dinkelbach-BSUM algorithm is proposed to optimize the IRS reflection coefficients for maximizing the achievable data transmission rate subjected to CSI errors; while for the multiuser case, a new penalty dual decomposition (PDD)-based algorithm is proposed to maximize the users' weighted sum-rate. Simulation results are presented to validate the effectiveness of our proposed algorithms as compared to benchmark schemes. In particular, useful insights are drawn to characterize the effect of IRS reflection amplitude control (with/without the conventional phase shift) on the system performance under imperfect CSI.

cs.IT↗

arXiv2021

An intelligent Data Delivery Service for and beyond the ATLAS experiment

The intelligent Data Delivery Service (iDDS) has been developed to cope with the huge increase of computing and storage resource usage in the coming LHC data taking. iDDS has been designed to intelligently orchestrate workflow and data management systems, decoupling data pre-processing, delivery, and main processing in various workflows. It is an experiment-agnostic service around a workflow-oriented structure to work with existing and emerging use cases in ATLAS and other experiments. Here we will present the motivation for iDDS, its design schema and architecture, use cases and current status, and plans for the future.

cs.DC↗

arXiv2021

The Labeled Multiple Canonical Correlation Analysis for Information Fusion

The objective of multimodal information fusion is to mathematically analyze information carried in different sources and create a new representation which will be more effectively utilized in pattern recognition and other multimedia information processing tasks. In this paper, we introduce a new method for multimodal information fusion and representation based on the Labeled Multiple Canonical Correlation Analysis (LMCCA). By incorporating class label information of the training samples,the proposed LMCCA ensures that the fused features carry discriminative characteristics of the multimodal information representations, and are capable of providing superior recognition performance. We implement a prototype of LMCCA to demonstrate its effectiveness on handwritten digit recognition,face recognition and object recognition utilizing multiple features,bimodal human emotion recognition involving information from both audio and visual domains. The generic nature of LMCCA allows it to take as input features extracted by any means,including those by deep learning (DL) methods. Experimental results show that the proposed method enhanced the performance of both statistical machine learning (SML) methods, and methods based on DL.

cs.CV↗

arXiv2021

UAV-Enabled Wireless Power Transfer: A Tutorial Overview

Unmanned aerial vehicle (UAV)-enabled wireless power transfer (WPT) has recently emerged as a promising technique to provide sustainable energy supply for widely distributed low-power ground devices (GDs) in large-scale wireless networks. Compared with the energy transmitters (ETs) in conventional WPT systems which are deployed at fixed locations, UAV-mounted aerial ETs can fly flexibly in the three-dimensional (3D) space to charge nearby GDs more efficiently. This paper provides a tutorial overview on UAV-enabled WPT and its appealing applications, in particular focusing on how to exploit UAVs' controllable mobility via their 3D trajectory design to maximize the amounts of energy transferred to all GDs in a wireless network with fairness. First, we consider the single-UAV-enabled WPT scenario with one UAV wirelessly charging multiple GDs at known locations. To solve the energy maximization problem in this case, we present a general trajectory design framework consisting of three innovative approaches to optimize the UAV trajectory, which are multi-location hovering, successive-hover-and-fly, and time-quantization-based optimization, respectively. Next, we consider the multi-UAV-enabled WPT scenario where multiple UAVs cooperatively charge many GDs in a large area. Building upon the single-UAV trajectory design, we propose two efficient schemes to jointly optimize multiple UAVs' trajectories, based on the principles of UAV swarming and GD clustering, respectively. Furthermore, we consider two important extensions of UAV-enabled WPT, namely UAV-enabled wireless powered communication networks (WPCN) and UAV-enabled wireless powered mobile edge computing (MEC).

cs.IT↗

arXiv2021

Double-IRS Aided MIMO Communication under LoS Channels: Capacity Maximization and Scaling

Intelligent reflecting surface (IRS) is a promising technology to extend the wireless signal coverage and support the high performance communication. By intelligently adjusting the reflection coefficients of a large number of passive reflecting elements, the IRS can modify the wireless propagation environment in favour of signal transmission. Different from most of the prior works which did not consider any cooperation between IRSs, in this work we propose and study a cooperative double-IRS aided multiple-input multiple-output (MIMO) communication system under the line-of-sight (LoS) propagation channels. We investigate the capacity maximization problem by jointly optimizing the transmit covariance matrix and the passive beamforming matrices of the two cooperative IRSs. Although the above problem is non-convex and difficult to solve, we transform and simplify the original problem by exploiting a tractable characterization of the LoS channels. Then we develop a novel low-complexity algorithm whose complexity is independent of the number of IRS elements. Moreover, we analyze the capacity scaling orders of the double-IRS aided MIMO system with respect to an asymptotically large number of IRS elements or transmit power, which significantly outperform those of the conventional single-IRS aided MIMO system, thanks to the cooperative passive beamforming gain brought by the double-reflection link and the spatial multiplexing gain harvested from the two single-reflection links. Extensive numerical results are provided to show that by exploiting the LoS channel properties, our proposed algorithm can achieve a desirable performance with low computational time. Also, our capacity scaling analysis is validated, and the double-IRS system is shown to achieve a much higher rate than its single-IRS counterpart as long as the number of IRS elements or the transmit power is not small.

cs.IT↗

arXiv2021

Distributed quantum phase estimation with entangled photons

Distributed quantum metrology can enhance the sensitivity for sensing spatially distributed parameters beyond the classical limits. Here we demonstrate distributed quantum phase estimation with discrete variables to achieve Heisenberg limit phase measurements. Based on parallel entanglement in modes and particles, we demonstrate distributed quantum sensing for both individual phase shifts and an averaged phase shift, with an error reduction up to 1.4 dB and 2.7 dB below the shot-noise limit. Furthermore, we demonstrate a combined strategy with parallel mode entanglement and multiple passes of the phase shifter in each mode. In particular, our experiment uses six entangled photons with each photon passing the phase shifter up to six times, and achieves a total number of photon passes N=21 at an error reduction up to 4.7 dB below the shot-noise limit. Our research provides a faithful verification of the benefit of entanglement and coherence for distributed quantum sensing in general quantum networks.

quant-ph↗

arXiv2021

Cooperative Multi-Beam Routing for Multi-IRS Aided Massive MIMO

Intelligent reflecting surface (IRS) is envisioned to play a significant role in future wireless communication systems thanks to its powerful capability of enabling smart and reconfigurable radio environment. In this paper, we study the multi-IRS aided downlink communication in a massive multiple-input multiple-output (MIMO) system, where a multi-antenna BS simultaneously serves multiple remote single-antenna users with orthogonal beams reflected by multiple IRSs. By exploiting the line-of-sight (LoS) link between each pair of selected IRSs, a multi-hop cascaded LoS link can be established between the BS and each user via their cooperative beam routing. Under this setup, we optimize the selected IRSs and their beam routing path for each user, along with the BS/IRS active/passive beamforming such that the minimum received signal power among all users is maximized, subject to a new multi-beam routing path separation constraint for avoiding the inter-user/route interference. To tackle this problem, we first derive the optimal BS/IRS active/passive beamforming in closed-form for any given beam routes and show the beam routing optimization is NP-complete by recasting it as an equivalent graph-optimization problem. To solve this challenging problem, we then propose an efficient recursive algorithm to partially enumerate the feasible solutions, which effectively balances the performance-complexity trade-off by tuning its design parameter. Numerical results demonstrate that the proposed algorithm can achieve near-optimal performance with low enumeration complexity and also outperform other benchmark schemes.

cs.IT↗

arXiv2021

TEMImageNet Training Library and AtomSegNet Deep-Learning Models for High-Precision Atom Segmentation, Localization, Denoising, and Super-Resolution Processing of Atomic-Resolution Images

Atom segmentation and localization, noise reduction and deblurring of atomic-resolution scanning transmission electron microscopy (STEM) images with high precision and robustness is a challenging task. Although several conventional algorithms, such has thresholding, edge detection and clustering, can achieve reasonable performance in some predefined sceneries, they tend to fail when interferences from the background are strong and unpredictable. Particularly, for atomic-resolution STEM images, so far there is no well-established algorithm that is robust enough to segment or detect all atomic columns when there is large thickness variation in a recorded image. Herein, we report the development of a training library and a deep learning method that can perform robust and precise atom segmentation, localization, denoising, and super-resolution processing of experimental images. Despite using simulated images as training datasets, the deep-learning model can self-adapt to experimental STEM images and shows outstanding performance in atom detection and localization in challenging contrast conditions and the precision consistently outperforms the state-of-the-art two-dimensional Gaussian fit method. Taking a step further, we have deployed our deep-learning models to a desktop app with a graphical user interface and the app is free and open-source. We have also built a TEM ImageNet project website for easy browsing and downloading of the training data.

cond-mat.mtrl-sci↗

arXiv2021

Environment-Aware and Training-Free Beam Alignment for mmWave Massive MIMO via Channel Knowledge Map

Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) communication system is expected to achieve enormous transmission rate, provided that the transmit and receive beams are properly aligned with the MIMO channel. However, existing beam alignment techniques rely on either channel estimation or beam sweeping, which incur prohibitively high training overhead, especially for future wireless systems with further increased antenna dimensions and more stringent requirement on cost-effective hardware architectures. In this paper, we propose a new beam alignment technique, which is environment-aware and training-free, by utilizing the emerging concept of channel knowledge map (CKM), together with the user location information that is readily available in contemporary wireless systems. CKM is a site-specific database, tagged with the transmitter/receiver locations, which contains useful channel information to facilitate or even obviate real-time channel state information (CSI) acquistion. Two instances of CKM are proposed for beam alignment in mmWave massive MIMO systems, namely channel path map (CPM) and beam index map (BIM). It is shown that compared with existing training-based beam alignment schemes, the proposed CKM-enabled environment-aware beam alignment is able to drastically improve the effective communication rate, even with moderate user location errors, thanks to its significant saving of the prohibitive training overhead.

eess.SP↗

arXiv2021

Online detection of cascading change-points

We propose an online detection procedure for cascading failures in the network from sequential data, which can be modeled as multiple correlated change-points happening during a short period. We consider a temporal diffusion network model to capture the temporal dynamic structure of multiple change-points and develop a sequential Shewhart procedure based on the generalized likelihood ratio statistics based on the diffusion network model assuming unknown post-change distribution parameters. We also tackle the computational complexity posed by the unknown propagation. Numerical experiments demonstrate the good performance for detecting cascade failures.

stat.OT↗

arXiv2021

Drug Repurposing for COVID-19 via Knowledge Graph Completion

Objective: To discover candidate drugs to repurpose for COVID-19 using literature-derived knowledge and knowledge graph completion methods. Methods: We propose a novel, integrative, and neural network-based literature-based discovery (LBD) approach to identify drug candidates from both PubMed and COVID-19-focused research literature. Our approach relies on semantic triples extracted using SemRep (via SemMedDB). We identified an informative subset of semantic triples using filtering rules and an accuracy classifier developed on a BERT variant, and used this subset to construct a knowledge graph. Five SOTA, neural knowledge graph completion algorithms were used to predict drug repurposing candidates. The models were trained and assessed using a time slicing approach and the predicted drugs were compared with a list of drugs reported in the literature and evaluated in clinical trials. These models were complemented by a discovery pattern-based approach. Results: Accuracy classifier based on PubMedBERT achieved the best performance (F1= 0.854) in classifying semantic predications. Among five knowledge graph completion models, TransE outperformed others (MR = 0.923, Hits@1=0.417). Some known drugs linked to COVID-19 in the literature were identified, as well as some candidate drugs that have not yet been studied. Discovery patterns enabled generation of plausible hypotheses regarding the relationships between the candidate drugs and COVID-19. Among them, five highly ranked and novel drugs (paclitaxel, SB 203580, alpha 2-antiplasmin, pyrrolidine dithiocarbamate, and butylated hydroxytoluene) with their mechanistic explanations were further discussed. Conclusion: We show that an LBD approach can be feasible for discovering drug candidates for COVID-19, and for generating mechanistic explanations. Our approach can be generalized to other diseases as well as to other clinical questions.

cs.CL↗

arXiv2021

Outage-Constrained Robust Beamforming for Intelligent Reflecting Surface Aided Wireless Communication

In intelligent reflecting surface (IRS) aided wireless communication systems, channel state information (CSI) is crucial to achieve its promising passive beamforming gains. However, CSI errors are inevitable in practice and generally correlated over the IRS reflecting elements due to the limited training with discrete phase shifts, which degrade the data transmission rate and reliability. In this paper, we focus on investigating the effect of CSI errors to the outage performance in an IRS-aided multiuser downlink communication system. Specifically, we aim to jointly optimize the active transmit precoding vectors at the access point (AP) and passive discrete phase shifts at the IRS to minimize the AP's transmit power, subject to the constraints on the maximum CSI-error induced outage probability for the users. First, we consider the single-user case and derive the user's outage probability in terms of the mean signal power (MSP) and variance of the received signal at the user. Since there is a trade-off in tuning these two parameters to minimize the outage probability, we propose to maximize their weighted sum with the optimal weight found by one-dimensional search. Then, for the general multiuser case, since the users' outage probabilities are difficult to obtain in closed-form due to the inter-user interference, we propose a novel constrained stochastic successive convex approximation (CSSCA) algorithm, which replaces the non-convex outage probability constraints with properly designed convex surrogate approximations. Simulation results verify the effectiveness of the proposed robust beamfoming algorithms and show their significant performance improvement over various benchmark schemes.

cs.IT↗

arXiv2021

Vector Measurements Using All Optical Scalar Atomic Magnetometers

Vector field measurement is demonstrated with an all-optical scalar atomic magnetometer using intrinsic parameters related to its scalar operation. The Bell-Bloom type atomic magnetometer measures the Larmor precession of cesium atoms through on-resonant absorption of a probe beam. While the AC component of the probe signal is used for the field magnitude measurement, the probe DC signal contains information about the polar angle, defined as the angle between the magnetic field and the probe beam. Additional polar angle information is obtained from the light-shift-induced magnetic field caused by the frequency modulation of the probe beam. With a measurement time of 100 milliseconds, better than 0.02 degree sensitivity has been achieved using a commercial miniaturized sensor at the optimal sensor orientation. The angle measurement accuracy is checked against an optical encoder over the entire polar angle range of 0 to 180 degrees. Better than 1 degree error is recorded over most set polar angles. Azimuthal angle measurement is also exhibited with two orthogonally oriented sensors.

physics.atom-ph↗

arXiv2021

Mechanical Properties of Atomically Thin Tungsten Dichalcogenides: WS$_2$, WSe$_2$ and WTe$_2$

Two-dimensional (2D) tungsten disulfide (WS$_2$), tungsten diselenide (WSe$_2$), and tungsten ditelluride (WTe$_2$) draw increasing attention due to their attractive properties deriving from the heavy tungsten and chalcogenide atoms, but their mechanical properties are still mostly unknown. Here, we determine the intrinsic and air-aged mechanical properties of mono-, bi-, and trilayer (1-3L) WS$_2$, WSe$_2$ and WTe$_2$ using a complementary suite of experiments and theoretical calculations. High-quality 1L WS$_2$ has the highest Young's modulus (302.4+-24.1 GPa) and strength (47.0+-8.6 GPa) of the entire family, overpassing those of 1L WSe$_2$ (258.6+-38.3 and 38.0+-6.0 GPa, respectively) and WTe$_2$ (149.1+-9.4 and 6.4+-3.3 GPa, respectively). However, the elasticity and strength of WS$_2$ decrease most dramatically with increased thickness among the three materials. We interpret the phenomenon by the different tendencies for interlayer sliding in equilibrium state and under in-plane strain and out-of-plane compression conditions in the indentation process, revealed by finite element method (FEM) and density functional theory (DFT) calculations including van der Waals (vdW) interactions. We also demonstrate that the mechanical properties of the high-quality 1-3L WS$_2$ and WSe$_2$ are largely stable in the air for up to 20 weeks. Intriguingly, the 1-3L WSe$_2$ shows increased modulus and strength values with aging in the air. This is ascribed to oxygen doping, which reinforces the structure. The present study will facilitate the design and use of 2D tungsten dichalcogenides in applications, such as strain engineering and flexible field-effect transistors (FETs).

cond-mat.mtrl-sci↗

arXiv2021

The evolution of network controllability in growing networks

The study of network structural controllability focuses on the minimum number of driver nodes needed to control a whole network. Despite intensive studies on this topic, most of them consider static networks only. It is well-known, however, that real networks are growing, with new nodes and links added to the system. Here, we analyze controllability of evolving networks and propose a general rule for the change of driver nodes. We further apply the rule to solve the problem of network augmentation subject to the controllability constraint. The findings fill a gap in our understanding of network controllability and shed light on controllability of real systems.

physics.soc-ph↗

arXiv2021

Testing Rank of Incomplete Unimodal Matrices

Several statistics-based detectors, based on unimodal matrix models, for determining the number of sources in a field are designed. A new variance ratio statistic is proposed, and its asymptotic distribution is analyzed. The variance ratio detector is shown to outperform the alternatives. It is shown that further improvements are achievable via optimally selected rotations. Numerical experiments demonstrate the performance gains of our detection methods over the baseline approach.

stat.AP↗