arXiv subjects

Rui-Yang Ju

Publications and source records attributed to Rui-Yang Ju.

At least 19 recordsLinked to original sources

arXiv2026

Seal-Robust KCR: A Robust Kuzushiji Character Recognition Framework under Seal Interference

Kuzushiji was one of the most widely used cursive writing systems in pre-modern Japan. Due to its highly cursive forms and extensive glyph variations, most modern Japanese readers are unable to read Kuzushiji characters. Consequently, recent studies have focused on developing automated Kuzushiji character recognition (KCR) methods, which have achieved strong performance on relatively clean Japanese historical document images. Although seals frequently appear in Japanese historical documents, existing methods often fail to maintain recognition accuracy under seal interference, particularly when seals overlap with characters. To address this challenge, we propose a seal-robust KCR framework. Based on character detection, classification, and ordering, the proposed framework additionally incorporates document restoration to mitigate seal interference, thereby improving overall recognition performance. In addition, we introduce a novel synthetic data augmentation strategy to enhance the performance of character detection models. We further correct annotation errors, reconstruct the dataset, and create a synthetic test set to simulate severe seal interference. Experimental results demonstrate the effectiveness of the proposed framework in mitigating the impact of seal interference on KCR. Compared with a conventional baseline and NDLkotenOCR, it achieves relative character error rate (CER) reductions of 39.7% and 5.9%, respectively, on the real test set, and 50.1% and 41.7%, respectively, on the synthetic test set.

cs.CV↗

arXiv2026

GlassesGB: Controllable 2D GAN-Based Eyewear Personalization for 3D Gaussian Blendshapes Head Avatars

Virtual try-on systems allow users to interactively try different products within VR scenarios. However, most existing VTON methods operate only on predefined eyewear templates and lack support for fine-grained, user-driven customization. While GlassesGAN enables personalized 2D eyewear design, its capability remains limited to 2D image generation. Motivated by the success of 3D Gaussian Blendshapes in head reconstruction, we integrate these two techniques and propose GlassesGB, a framework that supports customizable eyewear generation for 3D head avatars. GlassesGB effectively bridges 2D generative customization with 3D head avatar rendering, addressing the challenge in achieving personalized eyewear design for VR applications. The implementation code is available at https://ruiyangju.github.io/GlassesGB.

cs.CV↗

arXiv2025

MFE-GAN: Efficient GAN-based Framework for Document Image Enhancement and Binarization with Multi-scale Feature Extraction

Document image enhancement and binarization are commonly performed prior to document analysis and recognition tasks for improving the efficiency and accuracy of optical character recognition (OCR) systems. This is because directly recognizing text in degraded documents, particularly in color images, often results in unsatisfactory recognition performance. To address these issues, existing methods train independent generative adversarial networks (GANs) for different color channels to remove shadows and noise, which, in turn, facilitates efficient text information extraction. However, deploying multiple GANs results in long training and inference times. To reduce both training and inference times of document image enhancement and binarization models, we propose MFE-GAN, an efficient GAN-based framework with multi-scale feature extraction (MFE), which incorporates Haar wavelet transformation (HWT) and normalization to process document images before feeding them into GANs for training. In addition, we present novel generators, discriminators, and loss functions to improve the model's performance, and we conduct ablation studies to demonstrate their effectiveness. Experimental results on the Benchmark, Nabuco, and CMATERdb datasets demonstrate that the proposed MFE-GAN significantly reduces the total training and inference times while maintaining comparable performance with respect to state-of-the-art (SOTA) methods. The implementation of this work is available at https://ruiyangju.github.io/MFE-GAN.

cs.CV↗

arXiv2025

DKDS: A Benchmark Dataset of Degraded Kuzushiji Documents with Seals for Detection and Binarization

Kuzushiji, a pre-modern Japanese cursive script, can currently be read and understood by only a few thousand trained experts in Japan. With the rapid development of deep learning, researchers have begun applying Optical Character Recognition (OCR) techniques to transcribe Kuzushiji into modern Japanese. Although existing OCR methods perform well on clean pre-modern Japanese documents written in Kuzushiji, they often fail to consider various types of noise, such as document degradation and seals, which significantly affect recognition accuracy. To the best of our knowledge, no existing dataset specifically addresses these challenges. To address this gap, we introduce the Degraded Kuzushiji Documents with Seals (DKDS) dataset as a new benchmark for related tasks. We describe the dataset construction process, which involves the assistance of a trained Kuzushiji expert, and define two benchmark tracks: (1) Kuzushiji character and seal detection and (2) document binarization. For the Kuzushiji character and seal detection track, we provide baseline results using several recent versions of YOLO to detect Kuzushiji characters and seals. For the document binarization track, we present baseline results from traditional binarization algorithms, traditional algorithms combined with K-means clustering, two state-of-the-art (SOTA) generative adversarial network (GAN) methods, and our improved conditional GAN (cGAN)-based method. The DKDS dataset and the implementation code for baseline methods are available at https://ruiyangju.github.io/DKDS.

cs.CV↗

arXiv2025

Two-Stage Framework for Efficient UAV-Based Wildfire Video Analysis with Adaptive Compression and Fire Source Detection

Unmanned Aerial Vehicles (UAVs) have become increasingly important in disaster emergency response by facilitating aerial video analysis. Due to the limited computational resources available on UAVs, large models cannot be run efficiently for on-board analysis. To overcome this challenge, we propose a lightweight and efficient two-stage framework for wildfire monitoring and fire source detection on UAV platforms. Specifically, in Stage 1, we utilize a policy network to identify and discard redundant video clips, thereby reducing computational costs. We also introduce a station point mechanism that incorporates future frame information within the sequential policy network to improve prediction accuracy. This mechanism allows Stage 1 to operate in a near-real-time manner. In Stage 2, for frames classified as containing fire, we apply an improved YOLOv8 model to accurately localize the fire source in real-time on selected frames. We evaluate Stage 1 using the FLAME and HMDB51 datasets, and Stage 2 using the Fire & Smoke Detection Dataset. Experimental results show that our method significantly reduces computational costs while maintaining classification accuracy in Stage 1, and achieves high detection accuracy with real-time inference in Stage 2.

cs.CV↗

arXiv2025

ToonifyGB: StyleGAN-based Gaussian Blendshapes for 3D Stylized Head Avatars

The introduction of 3D Gaussian blendshapes has enabled the real-time reconstruction of animatable head avatars from monocular video. Toonify, a StyleGAN-based method, has become widely used for facial image stylization. To extend Toonify for synthesizing diverse stylized 3D head avatars using Gaussian blendshapes, we propose an efficient two-stage framework, ToonifyGB. In Stage 1 (stylized video generation), we adopt an improved StyleGAN to generate the stylized video from the input video frames, which overcomes the limitation of cropping aligned faces at a fixed resolution as preprocessing for normal StyleGAN. This process provides a more stable stylized video, which enables Gaussian blendshapes to better capture the high-frequency details of the video frames, facilitating the synthesis of high-quality animations in the next stage. In Stage 2 (Gaussian blendshapes synthesis), our method learns a stylized neutral head model and a set of expression blendshapes from the generated stylized video. By combining the neutral head model with expression blendshapes, ToonifyGB can efficiently render stylized avatars with arbitrary expressions. We validate the effectiveness of ToonifyGB on benchmark datasets using two representative styles: Arcane and Pixar.

cs.CV↗

arXiv2024

Pediatric Wrist Fracture Detection Using Feature Context Excitation Modules in X-ray Images

Children often suffer wrist trauma in daily life, while they usually need radiologists to analyze and interpret X-ray images before surgical treatment by surgeons. The development of deep learning has enabled neural networks to serve as computer-assisted diagnosis (CAD) tools to help doctors and experts in medical image diagnostics. Since YOLOv8 model has obtained the satisfactory success in object detection tasks, it has been applied to various fracture detection. This work introduces four variants of Feature Contexts Excitation-YOLOv8 (FCE-YOLOv8) model, each incorporating a different FCE module (i.e., modules of Squeeze-and-Excitation (SE), Global Context (GC), Gather-Excite (GE), and Gaussian Context Transformer (GCT)) to enhance the model performance. Experimental results on GRAZPEDWRI-DX dataset demonstrate that our proposed YOLOv8+GC-M3 model improves the mAP@50 value from 65.78% to 66.32%, outperforming the state-of-the-art (SOTA) model while reducing inference time. Furthermore, our proposed YOLOv8+SE-M3 model achieves the highest mAP@50 value of 67.07%, exceeding the SOTA performance. The implementation of this work is available at https://github.com/RuiyangJu/FCE-YOLOv8.

cs.CV↗

arXiv2024

YOLOv8-ResCBAM: YOLOv8 Based on An Effective Attention Module for Pediatric Wrist Fracture Detection

Wrist trauma and even fractures occur frequently in daily life, particularly among children who account for a significant proportion of fracture cases. Before performing surgery, surgeons often request patients to undergo X-ray imaging first, and prepare for the surgery based on the analysis of the X-ray images. With the development of neural networks, You Only Look Once (YOLO) series models have been widely used in fracture detection for Computer-Assisted Diagnosis, where the YOLOv8 model has obtained the satisfactory results. Applying the attention modules to neural networks is one of the effective methods to improve the model performance. This paper proposes YOLOv8-ResCBAM, which incorporates Convolutional Block Attention Module integrated with resblock (ResCBAM) into the original YOLOv8 network architecture. The experimental results on the GRAZPEDWRI-DX dataset demonstrate that the mean Average Precision calculated at Intersection over Union threshold of 0.5 (mAP 50) of the proposed model increased from 63.6% of the original YOLOv8 model to 65.8%, which achieves the state-of-the-art performance. The implementation code is available at https://github.com/RuiyangJu/Fracture_Detection_Improved_YOLOv8.

cs.CV↗

arXiv2024

ORB-SfMLearner: ORB-Guided Self-supervised Visual Odometry with Selective Online Adaptation

Deep visual odometry, despite extensive research, still faces limitations in accuracy and generalizability that prevent its broader application. To address these challenges, we propose an Oriented FAST and Rotated BRIEF (ORB)-guided visual odometry with selective online adaptation named ORB-SfMLearner. We present a novel use of ORB features for learning-based ego-motion estimation, leading to more robust and accurate results. We also introduce the cross-attention mechanism to enhance the explainability of PoseNet and have revealed that driving direction of the vehicle can be explained through the attention weights. To improve generalizability, our selective online adaptation allows the network to rapidly and selectively adjust to the optimal parameters across different domains. Experimental results on KITTI and vKITTI datasets show that our method outperforms previous state-of-the-art deep visual odometry methods in terms of ego-motion accuracy and generalizability. Code is available at https://github.com/PeaceNeil/ORB-SfMLearner

cs.CV↗

arXiv2024

Efficient Generative Adversarial Networks for Color Document Image Enhancement and Binarization Using Multi-scale Feature Extraction

The outcome of text recognition for degraded color documents is often unsatisfactory due to interference from various contaminants. To extract information more efficiently for text recognition, document image enhancement and binarization are often employed as preliminary steps in document analysis. Training independent generative adversarial networks (GANs) for each color channel can generate images where shadows and noise are effectively removed, which subsequently allows for efficient text information extraction. However, employing multiple GANs for different color channels requires long training and inference times. To reduce both the training and inference times of these preliminary steps, we propose an efficient method based on multi-scale feature extraction, which incorporates Haar wavelet transformation and normalization to process document images before submitting them to GANs for training. Experiment results show that our proposed method significantly reduces both the training and inference times while maintaining comparable performances when benchmarked against the state-of-the-art methods. In the best case scenario, a reduction of 10% and 26% are observed for training and inference times, respectively, while maintaining the model performance at 73.79 of Average-Score metric. The implementation of this work is available at https://github.com/RuiyangJu/Efficient_Document_Image_Binarization.

cs.CV↗

arXiv2024

Global Context Modeling in YOLOv8 for Pediatric Wrist Fracture Detection

Children often suffer wrist injuries in daily life, while fracture injuring radiologists usually need to analyze and interpret X-ray images before surgical treatment by surgeons. The development of deep learning has enabled neural network models to work as computer-assisted diagnosis (CAD) tools to help doctors and experts in diagnosis. Since the YOLOv8 models have obtained the satisfactory success in object detection tasks, it has been applied to fracture detection. The Global Context (GC) block effectively models the global context in a lightweight way, and incorporating it into YOLOv8 can greatly improve the model performance. This paper proposes the YOLOv8+GC model for fracture detection, which is an improved version of the YOLOv8 model with the GC block. Experimental results demonstrate that compared to the original YOLOv8 model, the proposed YOLOv8-GC model increases the mean average precision calculated at intersection over union threshold of 0.5 (mAP 50) from 63.58% to 66.32% on the GRAZPEDWRI-DX dataset, achieving the state-of-the-art (SOTA) level. The implementation code for this work is available on GitHub at https://github.com/RuiyangJu/YOLOv8_Global_Context_Fracture_Detection.

cs.CV↗

arXiv2024

Flood Data Analysis on SpaceNet 8 Using Apache Sedona

With the escalating frequency of floods posing persistent threats to human life and property, satellite remote sensing has emerged as an indispensable tool for monitoring flood hazards. SpaceNet8 offers a unique opportunity to leverage cutting-edge artificial intelligence technologies to assess these hazards. A significant contribution of this research is its application of Apache Sedona, an advanced platform specifically designed for the efficient and distributed processing of large-scale geospatial data. This platform aims to enhance the efficiency of error analysis, a critical aspect of improving flood damage detection accuracy. Based on Apache Sedona, we introduce a novel approach that addresses the challenges associated with inaccuracies in flood damage detection. This approach involves the retrieval of cases from historical flood events, the adaptation of these cases to current scenarios, and the revision of the model based on clustering algorithms to refine its performance. Through the replication of both the SpaceNet8 baseline and its top-performing models, we embark on a comprehensive error analysis. This analysis reveals several main sources of inaccuracies. To address these issues, we employ data visual interpretation and histogram equalization techniques, resulting in significant improvements in model metrics. After these enhancements, our indicators show a notable improvement, with precision up by 5%, F1 score by 2.6%, and IoU by 4.5%. This work highlights the importance of advanced geospatial data processing tools, such as Apache Sedona. By improving the accuracy and efficiency of flood detection, this research contributes to safeguarding public safety and strengthening infrastructure resilience in flood-prone areas, making it a valuable addition to the field of remote sensing and disaster management.

cs.CV↗

arXiv2024

FAD-SAR: A Novel Fishing Activity Detection System via Synthetic Aperture Radar Images Based on Deep Learning Method

Illegal, unreported, and unregulated (IUU) fishing activities seriously affect various aspects of human life. However, traditional methods for detecting and monitoring IUU fishing activities at sea have limitations. Although synthetic aperture radar (SAR) can complement existing vessel detection systems, extracting useful information from SAR images using traditional methods remains a challenge, especially in IUU fishing. This paper proposes a deep learning based fishing activity detection system, which is implemented on the xView3 dataset using six classical object detection models: SSD, RetinaNet, FSAF, FCOS, Faster R-CNN, and Cascade R-CNN. In addition, this work employs different enhancement techniques to improve the performance of the Faster R-CNN model. The experimental results demonstrate that training the Faster R-CNN model using the Online Hard Example Mining (OHEM) strategy increases the Avg-F1 value from 0.212 to 0.216.

cs.CV↗

arXiv2024

YOLOv9 for Fracture Detection in Pediatric Wrist Trauma X-ray Images

The introduction of YOLOv9, the latest version of the You Only Look Once (YOLO) series, has led to its widespread adoption across various scenarios. This paper is the first to apply the YOLOv9 algorithm model to the fracture detection task as computer-assisted diagnosis (CAD) to help radiologists and surgeons to interpret X-ray images. Specifically, this paper trained the model on the GRAZPEDWRI-DX dataset and extended the training set using data augmentation techniques to improve the model performance. Experimental results demonstrate that compared to the mAP 50-95 of the current state-of-the-art (SOTA) model, the YOLOv9 model increased the value from 42.16% to 43.73%, with an improvement of 3.7%. The implementation code is publicly available at https://github.com/RuiyangJu/YOLOv9-Fracture-Detection.

eess.IV↗

arXiv2024

YOLOv8-AM: YOLOv8 Based on Effective Attention Mechanisms for Pediatric Wrist Fracture Detection

Wrist trauma and even fractures occur frequently in daily life, particularly among children who account for a significant proportion of fracture cases. Before performing surgery, surgeons often request patients to undergo X-ray imaging first and prepare for it based on the analysis of the radiologist. With the development of neural networks, You Only Look Once (YOLO) series models have been widely used in fracture detection as computer-assisted diagnosis (CAD). In 2023, Ultralytics presented the latest version of the YOLO models, which has been employed for detecting fractures across various parts of the body. Attention mechanism is one of the hottest methods to improve the model performance. This research work proposes YOLOv8-AM, which incorporates the attention mechanism into the original YOLOv8 architecture. Specifically, we respectively employ four attention modules, Convolutional Block Attention Module (CBAM), Global Attention Mechanism (GAM), Efficient Channel Attention (ECA), and Shuffle Attention (SA), to design the improved models and train them on GRAZPEDWRI-DX dataset. Experimental results demonstrate that the mean Average Precision at IoU 50 (mAP 50) of the YOLOv8-AM model based on ResBlock + CBAM (ResCBAM) increased from 63.6% to 65.8%, which achieves the state-of-the-art (SOTA) performance. Conversely, YOLOv8-AM model incorporating GAM obtains the mAP 50 value of 64.2%, which is not a satisfactory enhancement. Therefore, we combine ResBlock and GAM, introducing ResGAM to design another new YOLOv8-AM model, whose mAP 50 value is increased to 65.0%. The implementation code for this study is available on GitHub at https://github.com/RuiyangJu/Fracture_Detection_Improved_YOLOv8.

cs.CV↗

arXiv2023

CCDWT-GAN: Generative Adversarial Networks Based on Color Channel Using Discrete Wavelet Transform for Document Image Binarization

To efficiently extract textual information from color degraded document images is a significant research area. The prolonged imperfect preservation of ancient documents has led to various types of degradation, such as page staining, paper yellowing, and ink bleeding. These types of degradation badly impact the image processing for features extraction. This paper introduces a novelty method employing generative adversarial networks based on color channel using discrete wavelet transform (CCDWT-GAN). The proposed method involves three stages: image preprocessing, image enhancement, and image binarization. In the initial step, we apply discrete wavelet transform (DWT) to retain the low-low (LL) subband image, thereby enhancing image quality. Subsequently, we divide the original input image into four single-channel colors (red, green, blue, and gray) to separately train adversarial networks. For the extraction of global and local features, we utilize the output image from the image enhancement stage and the entire input image to train adversarial networks independently, and then combine these two results as the final output. To validate the positive impact of the image enhancement and binarization stages on model performance, we conduct an ablation study. This work compares the performance of the proposed method with other state-of-the-art (SOTA) methods on DIBCO and H-DIBCO ((Handwritten) Document Image Binarization Competition) datasets. The experimental results demonstrate that CCDWT-GAN achieves a top two performance on multiple benchmark datasets. Notably, on DIBCO 2013 and 2016 dataset, our method achieves F-measure (FM) values of 95.24 and 91.46, respectively.

cs.CV↗

arXiv2023

Fracture Detection in Pediatric Wrist Trauma X-ray Images Using YOLOv8 Algorithm

Hospital emergency departments frequently receive lots of bone fracture cases, with pediatric wrist trauma fracture accounting for the majority of them. Before pediatric surgeons perform surgery, they need to ask patients how the fracture occurred and analyze the fracture situation by interpreting X-ray images. The interpretation of X-ray images often requires a combination of techniques from radiologists and surgeons, which requires time-consuming specialized training. With the rise of deep learning in the field of computer vision, network models applying for fracture detection has become an important research topic. In this paper, we use data augmentation to improve the model performance of YOLOv8 algorithm (the latest version of You Only Look Once) on a pediatric wrist trauma X-ray dataset (GRAZPEDWRI-DX), which is a public dataset. The experimental results show that our model has reached the state-of-the-art (SOTA) mean average precision (mAP 50). Specifically, mAP 50 of our model is 0.638, which is significantly higher than the 0.634 and 0.636 of the improved YOLOv7 and original YOLOv8 models. To enable surgeons to use our model for fracture detection on pediatric wrist trauma X-ray images, we have designed the application "Fracture Detection Using YOLOv8 App" to assist surgeons in diagnosing fractures, reducing the probability of error analysis, and providing more useful information for surgery.

cs.CV↗

arXiv2023

Resolution Enhancement Processing on Low Quality Images Using Swin Transformer Based on Interval Dense Connection Strategy

The Transformer-based method has demonstrated remarkable performance for image super-resolution in comparison to the method based on the convolutional neural networks (CNNs). However, using the self-attention mechanism like SwinIR (Image Restoration Using Swin Transformer) to extract feature information from images needs a significant amount of computational resources, which limits its application on low computing power platforms. To improve the model feature reuse, this research work proposes the Interval Dense Connection Strategy, which connects different blocks according to the newly designed algorithm. We apply this strategy to SwinIR and present a new model, which named SwinOIR (Object Image Restoration Using Swin Transformer). For image super-resolution, an ablation study is conducted to demonstrate the positive effect of the Interval Dense Connection Strategy on the model performance. Furthermore, we evaluate our model on various popular benchmark datasets, and compare it with other state-of-the-art (SOTA) lightweight models. For example, SwinOIR obtains a PSNR of 26.62 dB for x4 upscaling image super-resolution on Urban100 dataset, which is 0.15 dB higher than the SOTA model SwinIR. For real-life application, this work applies the lastest version of You Only Look Once (YOLOv8) model and the proposed model to perform object detection and real-life image super-resolution on low-quality images. This implementation code is publicly available at https://github.com/Rubbbbbbbbby/SwinOIR.

cs.CV↗