SearcharxivSearch

arXiv subjects

Ruifeng Duan

Publications and source records attributed to Ruifeng Duan.

9 recordsLinked to original sources

Coherent Multi-antenna Receiver for BPSK-modulated Ambient Backscatter Tags

Ambient Backscatter Communication (AmBC) is an emerging communication technology that can enable green Internet-of-Things deployments. The widespread acceptance of this paradigm is limited by low Signal-to-Interference-Plus-Noise Ratio (SINR) of the signal impinging on the receiver antenna due to the strong direct path interference and unknown ambient signal. The adverse impact of these two factors can be mitigated by using non-coherent multi-antenna receivers, which is known to require higher SINR to reach Bit-Error-Rate (BER) performance of coherent receivers. However, in literature, coherent receivers for AmBC systems are little-studied because of unknown ambient signal, unknown location of AmBC tags, and varying channel conditions. In this paper, a coherent multi-antenna receiver, which does not require a prior information of the ambient signal, for decoding Binary-Phase-shift-Keying (BPSK) modulated signal is presented. The performance of the proposed receiver is compared with the ideal coherent receiver that has a perfect phase information, and also with the performance of non-coherent receiver, which assumes distributions for ambient signal and phase offset caused by excess length of the backscatter path. Comparative simulation results show the designed receiver can achieve the same BER-performance of the ideal coherent receiver with 1-dB more SINR, which corresponds to 5-dB or more gain with respect to non-coherent reception of On-Off-Keying modulated signals. Variation of the detection performance with the tag location shows that the coverage area is in the close vicinity of the transmitter and a larger region around the receiver, which is consistent with the theoretical results.

eess.SP

Applications of Backscatter Communications for Healthcare Networks

Backscatter communication is expected to help in revitalizing the domain of healthcare through its myriad applications. From on-body sensors to in-body implants and miniature embeddable devices, there are many potential use cases that can leverage the miniature and low-powered nature of backscatter devices. However, the existing literature lacks a comprehensive study that provides a distilled review of the latest studies on backscatter communications from the healthcare perspective. Thus, with the objective to promote the utility of backscatter communication in healthcare, this paper aims to identify specific applications of backscatter systems. A detailed taxonomy of recent studies and gap analysis for future research directions are provided in this work. Finally, we conduct measurements at 590 MHz in different propagation environments with the in-house designed backscatter device. The link budget results show the promise of backscatter devices to communicate over large distances for indoor environments which demonstrates its potential in the healthcare system.

eess.SP

Low-complexity Noncoherent Maximum Likelihood Sequence Detection Scheme for CPM in Aeronautical Telemetry

Due to high spectral efficiency and power efficiency, the continuous phase modulation (CPM) technique with constant envelope is widely used in aeronautical telemetry in strategic weapons and rockets, which are essential for national defence and aeronautic application. How to improve the bit error rate (BER) performance of CPM and keep a reasonable complexity is key for the entire telemetry system and has been the focus of research and engineering design. In this paper, a low-complexity noncoherent maximum likelihood sequence detection (MLSD) scheme for CPM is proposed. In the proposed method, the criterion of noncoherent MLSD for CPM is derived when the carrier phase is unknown, and then a novel Viterbi algorithm (VA) with modified state vector is designed to simplify the implementation of noncoherent MLSD. Both analysis and experimental results show that the proposed approach has lower computational complexity and does not need accurate carrier phase recovery, which overcomes the shortage of traditional MLSD method. What's more, compared to the traditional MLSD method, the proposed method also achieves almost the same detection performance.

eess.SP

Hybrid Beamformer Design for High Dynamic Range Ambient Backscatter Receivers

In bi-static Ambient Backscatter Communications (AmBC) systems, the direct path from the ambient source to the receiver can be several orders of magnitude stronger than the scattered path modulated by the AmBC device. Because of the large power difference between these two signals, the receiver needs to operate at a large dynamic range. In this paper, we propose a novel analog-digital hybrid null-steering beamformer which allows the backscatter receiver to detect and decode the weak AmBC-modulated signal buried in the strong direct path signals and the noise without requiring the instantaneous channel state information. The analog cancellation of the strong signal components allow the receiver automatic gain control to adjust to the level of the weak AmBC signals. This hence allows common analog-to-digital converters to be used for sampling the signal. After cancelling the strong components, the ambient source signal appears as zero mean fast fading from the AmBC system point of view. We use the direct path signal component to track the phase of the unknown ambient signal. In order to avoid channel estimation, we propose AmBC to use orthogonal channelization codes.

cs.IT

Quantum Backscatter Communication: A New Paradigm

In this paper, we propose a novel quantum backscatter communications (QBC) protocol, inspired by the quantum illumination (QI) concept. In the QBC paradigm, the transmitter generates entangled photon pair. The signal photon is transmitted and the idler photon is kept at the receiver. The tag antenna communicates by performing the pulse amplitude modulation (PAM), binary phase shift keying (BPSK) or quadratic phase shift keying (QPSK) on the signal impinging at the antenna. Using the sum-frequency-generation receiver, our QBC protocol achieves a 6 dB error exponent gain for PAM and BPSK, and 3 dB gain for QPSK over its classical counterpart. Finally, we discuss the QI-enhanced secure backscatter communication.

quant-ph

Multiantenna Quantum Backscatter Communications

Quantum illumination (QI) is a revolutionary photonic quantum sensing paradigm that enhances the sensitivity of photodetection in noisy and lossy environments. The QI concept has been recently used to propose a quantum backscatter communication (QBC), with the aim of increasing the receiver sensitivity beyond the limits of its classical counterpart. One of the practical challenges in microwave QI is the slow rate at which the entangled microwave modes can be generated. Here, we propose to mitigate this problem by using a multiple-input multiple-output antenna system to synthetically increase the number of efficiently-distinguishable modes in the QBC context.

cs.IT

On the Achievable Rate of Bi-Static Modulated Re-Scatter Systems

In ambient re-scatter communications, devices convey information by modulating and re-scattering the radio frequency signals impinging on their antennas. In this correspondence, we consider a system consisting of a legacy modulated continuous carrier multiple-input-multiple-output (MIMO) link and a multi-antenna modulated re-scatter (MRS) node, where the MRS node modulates and re-scatters the signal generated by the legacy transmitter. The receiver seeks to decode both the original message and the information added by the MRS. We show that the achievable sum rate of this system exceeds that which the legacy system could achieve alone. We further consider the impact of channel estimation errors under the least squares channel estimation and study the achievable rate of the legacy and MRS systems, where a linear minimum mean square error receiver with successive interference cancellation is utilized for joint decoding.

cs.IT

Asymptotic Analysis of Multi-Antenna Cognitive Radio Systems Using Extreme Value Theory

We consider a spectrum-sharing cognitive radio system with antenna selection applied at the secondary transmitter (ST). Based on the extreme value theory, we deduce a simple and accurate expression for the asymptotic distribution of the signal to interference plus noise ratio at the secondary receiver. Using this result, the asymptotic mean capacity and the outage capacity for the secondary user (SU) are derived. The obtained asymptotic capacities approach the exact results as the number of transmit antennas $N$ increases. Results indicate that the rate of the SU scales as $\log(N)$ when the transmit power of the ST is limited by the maximum allowable interference level, while rate scales as $\log(\log(N))$ if ST is limited by the maximum transmit power.

cs.IT

Performance Analysis of Mean Value-Based Power Allocation with Primary User Interference in Spectrum Sharing Systems

In this paper, we provide an exact expression for the ergodic capacity of the secondary user, and a unified closed-form expression for its bounds with taking the consideration of the primary interference at the secondary receiver. In addition, a simple but accurate approximation of the the ergodic capacity of the primary user is presented. Moreover, a primary user capacity loss based power allocation scheme for the secondary user is also proposed. Finally, we compare the performance of the two power allocation schemes in terms of the sum capacity. The results are validated through using numerical results and simulations.

cs.IT