SearcharxivSearch

arXiv subjects

Ruifeng Gao

Publications and source records attributed to Ruifeng Gao.

16 recordsLinked to original sources

A Foundation Model for Cross-Band CSI Reconstruction

Acquiring dense high-frequency channel state information (CSI) is costly in multi-band low-altitude wireless systems because pilot resources are limited and channel dimensions change with the carrier frequency, bandwidth, and antenna array size. We address cross-band CSI reconstruction, which recovers dense target-band CSI from dense source-band CSI and sparse, noisy target-band pilots. We propose a foundation model that represents every band in a common power-angle-delay spectrum and uses radio-frequency metadata as auxiliary conditioning for an encoder-decoder. The model uses pilot-guided cross-attention to fuse source-band structure with target-band pilot, allowing one model to handle heterogeneous band pairs. It is trained by pilot-densification pretraining followed by supervised cross-band fine-tuning. On ray-tracing, 3GPP, and DeepMIMO datasets, the model lowers average normalized mean-square error by 6.1 dB over the state-of-the-art pair-specific baseline. It also transfers to two unseen pairs without paired fine-tuning, achieving 7.5 and 7.1 dB gains over fully supervised baselines, and remains effective when target pilots are noisy.

eess.SP

Similar Pattern Annotation via Retrieval Knowledge for LLM-Based Test Code Fault Localization

Software failures remain a major challenge in modern software development, and identifying the code elements responsible for failures is a time-consuming debugging task. While extensive research has focused on fault localization in the system under test (SUT), failures can also originate from faulty system test scripts. This problem, known as Test Code Fault Localization (TCFL), has received significantly less attention despite its importance in continuous integration (CI) environments where large test suites are executed frequently. TCFL is particularly challenging because it typically operates under black-box conditions, relies on limited diagnostic signals such as error messages and partial logs, and involves large system-level test scripts that expand the fault localization search space. In this paper, we propose SPARK, a framework that integrates accumulated debugging knowledge from continuous integration (CI) environments into Large Language Model (LLM)-based TCFL. Given a newly observed failing test case, SPARK retrieves similar fault-labeled test cases from a debugging knowledge corpus and selectively annotates suspicious lines of the failing test based on their similarity to previously observed fault patterns. These annotations guide the LLM's reasoning while maintaining scalability and avoiding the prompt-length explosion common to naive retrieval-augmented approaches. We evaluate SPARK on three industrial datasets containing real-world faulty Python test cases from different software products. The results show that SPARK consistently improves fault localization effectiveness compared to the existing LLM-based TCFL baseline while maintaining comparable inference cost and token usage. In particular, the approach advances the state of the art by identifying more correct faulty locations in complex test cases containing multiple faults.

cs.SE

Invertible Diffusion for Low-Memory Channel Gain Map Construction in Wireless Communication Networks

Channel gain maps (CGMs) enable propagation-aware services in edge-intelligent wireless communication networks, while diffusion-based CGM construction is memory intensive for on-device training or adaptation. This letter proposes InvDiff-CGM, an invertible diffusion framework that constructs CGMs from sparse measurements and environmental priors. By adopting invertible architectures in both the diffusion process and the U-Net noise estimator, InvDiff-CGM achieves near-constant training memory consumption. A prior-informed multi-scale injector further integrates environmental priors with sparse measurements to improve physical consistency and detail preservation. Experiments on RadioMap3DSeer show about an 85\% reduction in peak training memory and a PSNR of 38.02~dB, outperforming representative recent baselines. This validates the practicality of InvDiff-CGM for high-fidelity CGM construction under edge resource constraints.

eess.SP

A Unified Codebook Design for Curvature-Reconfigurable Apertures: Seamless Near to Far Field Coverage

Beam training for extremely large-scale arrays with curvature-reconfigurable apertures (CuRAs) faces the critical challenge of severe, geometry-dependent angle-range coupling. While most existing designs compartmentalize near field and far field scenarios, we propose a unified, distance-adaptive hierarchical codebook framework for 1-D and 2-D CuRAs that seamlessly bridges both propagation regimes. Under a spherical-wave model, we first characterize the beamforming-gain correlation in a polar angular domain, deriving an angle-dependent angular sampling rule to capture the varying curvature. To achieve full-range coverage, we introduce a direction-dependent effective Rayleigh distance (ERD) as a soft boundary to gate the range sampling. Crucially, by sampling uniformly in the reciprocal-range domain, the proposed codebook provides precise, dense focusing within the ERD and automatically degenerates into sparse, angle-only steering beyond it. This mechanism eliminates the need for hard mode-switching between near- and far-field operations. Simulation results demonstrate that our unified design consistently outperforms representative baselines in spectral efficiency and alignment accuracy, offering a comprehensive solution for full-range CuRA communications.

eess.SP

Spatial Correlation, Non-Stationarity, and Degrees of Freedom of Holographic Curvature-Reconfigurable Apertures

Low-altitude wireless platforms increasingly require lightweight, conformal, and densely sampled antenna array apertures with high array gain and spatial selectivity. However, when deployed on nonplanar surfaces, curvature alters the array manifold, local visibility, and propagation support, potentially invalidating spatial-stationarity assumptions. In this paper, we investigate a holographic curvature-reconfigurable aperture (HoloCuRA), modeled as a curvature-controllable holographic surface, and develop a visibility-aware spatial characterization framework for its low-altitude applications. Specifically, the framework jointly quantifies array-domain spatial non-stationarity (SnS), and spatial degrees of freedom (DoF) in line-of-sight, 3GPP non-line-of-sight, and isotropic-scattering propagation environments. For SnS, a novel Power-balanced, Visibility-aware Correlation-Matrix Distance (PoVi-CMD) and a two-stage subarray-screening procedure are introduced. For DoF, the Rényi-2 effective rank is adopted, and tractable spatial-correlation expressions under isotropic scattering are developed for efficient DoF analysis. Furthermore, a realizable antenna port mode is introduced to connect SnS with DoF. Numerical results reveal that curvature and propagation support are the primary determinants of both SnS and DoF in HoloCuRA: array domain SnS determines whether subarray statistics can be treated as locally consistent, whereas DoF limits the global spatial modes. The findings provide useful guidance for low-altitude antenna-system design.

eess.SY

Modeling and Analysis of Land-to-Ship Maritime Wireless Channels at 5.8 GHz

Maritime channel modeling is crucial for designing robust nearshore communication systems, yet reliable models that account for the dynamic marine environment with varying sea waves, wind conditions, and vessel motions remain scarce. This article investigates land-to-ship maritime wireless channel characteristics at 5.8 GHz based upon an extensive measurement campaign, with concurrent hydrological and meteorological information collection. First, a novel large-scale path loss model with physical foundation and high accuracy is proposed for dynamic marine environments. Then, we introduce the concept of sea-wave-induced fixed-point (SWIFT) fading, a peculiar phenomenon in maritime scenarios that captures the impact of sea surface fluctuations on received power. An enhanced two-ray model incorporating vessel rotational motion is propounded to simulate the SWIFT fading, showing good alignment with measured data, particularly for modest antenna movements. Next, the small-scale fading is studied by leveraging a variety of models including the two-wave with diffuse power (TWDP) and asymmetric Laplace distributions, with the latter performing well in most cases, while TWDP better captures bimodal fading in rough seas. Furthermore, maritime channel sparsity is examined via the Gini index and Rician $K$ factor, and temporal dispersion is characterized. The resulting channel models and parameter characteristics offer valuable insights for maritime wireless system design and deployment.

eess.SP

Diffuse scattering measurements and mechanism analysis at 8, 12, and 28 GHz for typical building surfaces

This study investigates the fundamental diffuse scattering mechanisms from three typical building wall surfaces, conducting measurements and model parameterization at 28 GHz and two key FR3 frequencies (8 GHz and 12 GHz). A novel three-dimensional (3D) measurement procedure is proposed to capture comprehensive spatial characteristics, and its effectiveness in improving parameterization accuracy was verified using 28 GHz data. For parameterization, we developed a new method utilizing two dimensions of the high-bandwidth power delay profile-received power and delay spread-thereby fully leveraging the rich information provided by such measurements. Furthermore, we introduce the ER-BK hybrid model, which integrates the Beckmann-Kirchhoff (BK) model's high accuracy and cross-frequency adaptability with the Effective Roughness (ER) model's simplicity, applying it to the building surfaces. Our results show that diffuse scattering at 8 GHz and 12 GHz is highly similar, distinct from that at 28 GHz. A comparison revealed that the BK model provides a better fit for our FR3 measurement data. Crucially, we validated the angular generalization of the parameterized BK model using data from a different incident angle than the one used for fitting. The feasibility of the ER-BK hybrid model was also verified through simulation of the parameterized marble surface.

eess.SP

Maritime Communication in Evaporation Duct Environment with Ship Trajectory Optimization

In maritime wireless networks, the evaporation duct effect has been known as a preferable condition for long-range transmissions. However, how to effectively utilize the duct effect for efficient communication design is still open for investigation. In this paper, we consider a typical scenario of ship-to-shore data transmission, where a ship collects data from multiple oceanographic buoys, sails from one to another, and transmits the collected data back to a terrestrial base station during its voyage. A novel framework, which exploits priori information of the channel gain map in the presence of evaporation duct, is proposed to minimize the data transmission time and the sailing time by optimizing the ship's trajectory. To this end, a multi-objective optimization problem is formulated and is further solved by a dynamic population PSO-integrated NSGA-II algorithm. Through simulations, it is demonstrated that, compared to the benchmark scheme which ignores useful information of the evaporation duct, the proposed scheme can effectively reduce both the data transmission time and the sailing time.

eess.SP

Investigation of Superdirectivity in Planar Holographic Arrays

This paper studies the superdirectivity characteristics of uniform rectangular arrays (URAs) for holographic multiple-input multiple-output systems. By establishing a mathematical directivity model for the URA, an analytical expression for the maximum directivity is derived. Accordingly, systematic analysis is performed in conjunction with numerical simulations. Results show that the directivity can be significantly enhanced via rational utilization of coupling effects. However, this enhancement yields diminishing returns when antenna spacings transition to deep sub-wavelength scales. This study provides a theoretical basis for the design of superdirective URAs and offers valuable insights for holographic array optimization in 5G/6G communication systems.

eess.SP

Directional Measurements and Analysis for FR3 Low-Altitude Channels in a Campus Environment

In this paper, we present detailed low-altitude channel measurements at the FR3 band in an outdoor campus environment. Using a time-domain channel sounder system, we conduct two types of measurements: path loss measurements by moving the transmitter (Tx) at one-meter intervals along a 26-point rooftop path, and directional power angular spectrum measurements through antenna scanning at half-power beam width intervals. The path loss analysis across different Rx shows that the close-in model outperforms conventional 3GPP models and height-corrected variants, with path loss exponents close to free space values indicating line-of-sight dominance. The power angular spectrum measurements show that propagation behavior varies significantly with environmental conditions. Closer Rx exhibit stronger sensitivity to ground reflections during downward Tx tilting, while obstructed links display uniform angular characteristics due to dominant scattering effects, and corridor environments produce asymmetric power distributions. These results indicate that low-altitude propagation is characterized by complex interactions between Tx height and ground scattering mechanisms, providing fundamental insights for channel modeling in emerging mid-band communication systems.

eess.SP

Efficient Black-Box Fault Localization for System-Level Test Code Using Large Language Models

Fault localization (FL) is a critical step in debugging, which typically relies on repeated executions to pinpoint faulty code regions. However, repeated executions can be impractical in the presence of non-deterministic failures or high execution costs. While recent efforts have leveraged Large Language Models (LLMs) to aid execution-free FL, these have primarily focused on identifying faults in the system-under-test (SUT) rather than in the often complex system-level test code. However, the latter is also important, as in practice, many failures are triggered by faulty test code. To overcome these challenges, we introduce a fully static, LLM-driven approach for system-level test code fault localization (TCFL) that does not require executing the test case. Our method uses a single failure execution log to estimate the test's execution trace through three novel algorithms that identify only code statements likely involved in the failure. This pruned trace, combined with the error message, is used to prompt the LLM to rank potential faulty locations. Our black-box, system-level approach requires no access to the SUT source code and is applicable to complex test scripts that assess full system behavior. We evaluate our technique at the function, block, and line levels using an industrial dataset of faulty Python test cases that were not used in pre-training LLMs. Results show that our best-estimated traces closely match the actual traces, with an F1 score of around 90%. Additionally, pruning the complex system-level test code reduces the LLM's inference time by up to 34% without any loss in FL performance. Our method achieves equal or higher FL accuracy, requiring over 85% less average inference time per test case and 93% fewer tokens than the latest LLM-guided FL method.

cs.SE

Beamforming Design for ISAC Systems with Suppressed Range-Angle Sidelobes

Integrated sensing and communication (ISAC) represents a pivotal advancement for future wireless networks. This paper introduces a novel ISAC beamforming method for enhancing sensing performance while preserving communication quality by leveraging the ambiguity function (AF). We formulate an optimization problem to minimize the integrated sidelobe level ratio (ISLR) of the AF subject to the constraints of transmission power, communication signalto-interference-plus-noise ratio, and sensing gain. To address the non-convexity of the optimization problem, semidefinite relaxation is adopted. Numerical results show that our method significantly reduces range sidelobes and achieves a lower ISLR in the rangeangle domain compared to other approaches.

cs.IT

Channel Gain Map Construction based on Subregional Learning and Prediction

The construction of channel gain map (CGM) is essential for realizing environment-aware wireless communications expected in 6G, for which a fundamental problem is how to predict the channel gains at unknown locations effectively by a finite number of measurements. As using a single prediction model is not effective in complex propagation environments, we propose a subregional learning-based CGM construction scheme, with which the entire map is divided into subregions via data-driven clustering, then individual models are constructed and trained for every subregion. In this way, specific propagation feature in each subregion can be better extracted with finite training data. Moreover, we propose to further improve prediction accuracy by uneven subregion sampling, as well as training data reuse around the subregion boundaries. Simulation results validate the effectiveness of the proposed scheme in CGM construction.

cs.NI

Measurement and Analysis of Scattering From Building Surfaces at Millimeter-Wave Frequency

In future air-to-ground integrated networks, the scattering effects from ground-based scatterers, such as buildings, cannot be neglected in millimeter-wave and higher frequency bands, and have a significant impact on channel characteristics. However, current scattering measurement studies primarily focus on single incident angles within the incident plane, leading to insufficient characterization of scattering properties. In this paper, we present scattering measurements conducted at 28 GHz on various real-world building surfaces with multiple incident angles and three-dimensional (3D) receiving angles. The measured data are analyzed in conjunction with parameterized scattering models in ray tracing and numerical simulations. Results indicate that for millimeter-wave channel modeling near building surfaces, it is crucial to account not only for surface materials but also for the scattering properties of the building surfaces with respect to the incident angle and receiving positions in 3D space.

eess.SP

Millimeter-Wave Energy-Efficient Hybrid Beamforming Architecture and Algorithm

This paper studies energy-efficient hybrid beamforming architectures and its algorithm design in millimeter-wave communication systems, aiming to address the challenges faced by existing hybrid beamforming due to low hardware flexibility and high power consumption. To solve the problems of existing hybrid beamforming, a novel energy-efficient hybrid beamforming architecture is proposed, where radio-frequency (RF) switch networks are introduced at the front and rear ends of the phase shifter network, enabling dynamic connections between the RF chains and the phase shifter array as well as the antenna array. The system model of the proposed architecture is established, including digital precoding and analog precoding processes, and the practical hardware limitations such as quantization errors of the digital-to-analog converter (DAC) and phase shifter resolution. In order to maximize the energy efficiency, this paper derives an energy efficiency model including spectral efficiency and system power consumption, and a hybrid precoding algorithm is proposed based on block coordinate descent to iteratively optimize the digital precoding matrix, analog precoding matrix, and DAC resolution. Simulation results under the NYUSIM-generated millimeter-wave channels show that the proposed hybrid beamforming architecture and precoding algorithm have higher energy efficiency than existing representative architectures and precoding algorithms under complete and partial channel state information, while the loss of spectral efficiency compared to fully connected architecture is less than 20%

eess.SP

Physical Layer Security for UAV Communications in 5G and Beyond Networks

Due to its high mobility and flexible deployment, unmanned aerial vehicle (UAV) is drawing unprecedented interest in both military and civil applications to enable agile wireless communications and provide ubiquitous connectivity. Mainly operating in an open environment, UAV communications can benefit from dominant line-of-sight links; however, it on the other hand renders the UAVs more vulnerable to malicious eavesdropping or jamming attacks. Recently, physical layer security (PLS), which exploits the inherent randomness of the wireless channels for secure communications, has been introduced to UAV systems as an important complement to the conventional cryptography-based approaches. In this paper, a comprehensive survey on the current achievements of the UAV-aided wireless communications is conducted from the PLS perspective. We first introduce the basic concepts of UAV communications including the typical static/mobile deployment scenarios, the unique characteristics of air-to-ground channels, as well as various roles that a UAV may act when PLS is concerned. Then, we introduce the widely used secrecy performance metrics and start by reviewing the secrecy performance analysis and enhancing techniques for statically deployed UAV systems, and extend the discussion to a more general scenario where the UAVs' mobility is further exploited. For both cases, respectively, we summarize the commonly adopted methodologies in the corresponding analysis and design, then describe important works in the literature in detail. Finally, potential research directions and challenges are discussed to provide an outlook for future works in the area of UAV-PLS in 5G and beyond networks.

cs.NI