arXiv subjects

Ruijuan Xu

Publications and source records attributed to Ruijuan Xu.

15 recordsLinked to original sources

arXiv2026

Optical Signature of Moir\'e Superlattices Formed by Twisted SrTiO$_3$ Membranes

Moir\'e superlattices formed at the interfaces of mismatched lattices have attracted significant interest over the past decade due to their large tunability of band parameters and interactions among electrons, spins, and lattices. Superlattices made from twisted perovskite oxides may have strong structure and potential modulation, but evidence of such modulation over macroscopic areas, particularly at large twisting angles, has not been clearly demonstrated so far. Here, we fabricated millimeter-scale twisted oxide bilayers at $36^\circ$ angle, close to the simple coincidence site lattice condition $\Sigma5$, from freestanding SrTiO$_3$ membranes. We discovered new low-frequency vibrational modes whose Raman activity, according to molecular dynamics simulations, is greatly enhanced by an asymmetric, twisted interface between the SrO and TiO$_2$ layers. Such an interface is energetically favorable from first-principles calculations and is corroborated by the observation of strong second harmonic generation from the interface comparable to that from the SrTiO$_3$ surface throughout the bilayer region. The results are consistent with interlayer coupling enhanced by high-temperature annealing and confirmed by cross-sectional scanning transmission electron microscopy imaging. Our work sheds light on the structural behavior of twisted oxides and provides directions for tuning their phononic and nonlinear optical properties in future studies.

cond-mat.mtrl-sci↗

arXiv2026

Defect-engineered scaling of lead-free ferroelectrics with ultralow-voltage switching

Scaling ferroelectrics to nanometer thicknesses remains a central challenge for low-power, nonvolatile electronics, as leakage currents increasingly dominate with reduced dimensions. Alkali-based, lead-free ferroelectrics offer an environmentally sustainable alternative to lead-based systems, yet their scaling is severely limited by leakage arising from volatile alkali constituents. Here, we show that this intrinsic limitation can be transformed into an advantageous degree of freedom through defect engineering. By precisely modulating alkali deficiency during thin-film synthesis, we engineer clustered defect complexes that function as deep trap states, strongly suppressing leakage and enabling robust ferroelectric operation in ultrathin films down to the sub-10 nm regime at voltages below 100 mV. Our results establish defect-enabled scaling as a viable pathway for advancing environmentally benign ferroelectrics toward ultra-low-power, non-volatile electronic technologies.

cond-mat.mtrl-sci↗

arXiv2026

Deterministic fabrication of large-area, high-crystallinity oxide moire superlattices

Oxide twistronics extends moire engineering beyond van der Waals materials, offering a promising platform for accessing emergent interfacial phenomena arising from the strong coupling of lattice, charge, and orbital degrees of freedom in complex oxides. However, deterministic fabrication of high-crystallinity oxide moire superlattices over large lateral dimensions remains challenging due to the three-dimensional bonding network of oxides. Here, we demonstrate a scalable, generalized fabrication strategy that enables the formation of high-crystallinity oxide moire superlattices with clean, chemically bonded interfaces and precisely controlled twist angles down to nominal values of 0.1 degree, achieving sub-degree twist-angle accuracy across large contiguous lateral dimensions approaching the millimeter scale. Using NaNbO3 as a model system, we show that the resulting interlayer coupling drives pronounced structural reconstruction that modifies both the phase structure and ferroelectric domain configuration. Synchrotron-based X-ray 3D reciprocal space mapping reveals the emergence of a single-phase state in twisted bilayers, in contrast to the mixed-phase structure observed in single-layer membranes prior to twist assembly. The structural signatures are further consistent with gradual lattice rotation distributed along the thickness direction that may accommodate interfacial shear strain, distinct from reconstruction observed in van der Waals moire systems, which primarily occurs through in-plane stacking rearrangement. This collective lattice response is correlated with twist-dependent nanoscale electromechanical modulations observed by piezoresponse force microscopy. These results establish a scalable materials platform for oxide twistronics and open new pathways towards integrating twist-engineered complex oxides into practical, macroscale device architectures.

cond-mat.mtrl-sci↗

arXiv2026

Establishing Atomic Coherence in Twisted Oxide Membranes Containing Volatile Elements

Twisted oxide membranes represent a promising platform for exploring moire physics and emergent quantum phenomena. However, the presence of amorphous interfacial dead layers in conventional oxide heterostructures impedes coherent coupling and suppresses moire-induced interactions. While high-temperature thermal treatments can facilitate interfacial bonding, additional care is needed for materials containing volatile elements, where elevated temperatures may cause elemental loss. This study demonstrates the realization of atomically coherent, chemically bonded interface in twisted NaNbO3 heterostructures through controlled oxygen-annealing treatment. Atomic-resolution imaging and spectroscopy reveal ordered perovskite registry accompanied by systematic lattice contraction and modified electronic structure at the twisted interface, providing signatures of chemical reconstruction rather than physical adhesion. This reconstructed interface mediates highly asymmetric strain propagation in which the bottom membrane remains nearly relaxed while the top membrane accommodates substantial shear strain, thereby establishing a strain gradient that enables long-range electromechanical coupling throughout the twisted oxide membranes. By resolving the nature of the reconstructed interface, these findings establish a robust pathway for achieving coherent and strain-tunable oxide moire superlattices, opening pathways to engineer emergent ferroic and electronic functionalities.

cond-mat.mtrl-sci↗

arXiv2025

Mind the Gap -- Imaging Buried Interfaces in Twisted Oxide Moir\'es

The ability to tune electronic structure in twisted stacks of two-dimensional (2D) materials has motivated the exploration of similar moir\'e physics with twisted oxide membranes. Due to the intrinsic three-dimensional nature of bonding in many oxides, achieving atomic-level coupling is significantly more challenging than with van der Waals materials. Although clean interfaces with atomic-level proximity have been demonstrated in ceramic bicrystals using high-temperature and high-pressure processing to facilitate atomic diffusion that flattens rough interfaces, such conditions are not readily accessible when bonding oxide membranes. This study shows how topographic mismatch due to surface roughness of the membranes can restrict atomic-scale proximity at the interface to isolated patches even after contaminants and amorphous interlayers are eliminated. In interfaces between 2D materials and oxide membranes the reduced ability of the 2D material to conform to the membrane's step-terrace topography also limits atomic-scale contact. When imaging stacked membranes in projection, we find conventional through-focal imaging to be relatively insensitive to the buried interface, whereas electron ptychography detects structural variations on the order of a nanometer. These findings highlight interface roughness as a key challenge for the field of oxide twistronics and emphasize the need for reliable characterization methods, both in cross-section and projection.

cond-mat.mtrl-sci↗

arXiv2025

Low-loss far-infrared surface phonon polaritons in suspended SrTiO3 nanomembranes

Phonon polaritons (PhPs), excitations arising from the coupling of light with lattice vibrations, enable light confinement and local field enhancement, which is essential for various photonic and thermal applications. To date, PhPs with high confinement and low loss have been mainly observed in the mid-infrared regime and mostly in manually exfoliated flakes of van der Waals (vdW) materials. In this work, we demonstrate the existence of low-loss, thickness-tunable phonon polaritons in the far-infrared regime within transferable free-standing SrTiO3 membranes synthesized through a scalable approach, achieving high figures of merit, which are comparable to the previous record values from the vdW materials. Leveraging atomic precision in thickness control, large dimensions, and compatibility with mature oxide electronics, functional oxide membranes present a promising large-scale two-dimensional (2D) platform alternative to vdW materials for on-chip polaritonic technologies in the far-infrared regime.

physics.optics↗

arXiv2025

The Classical-to-Quantum Crossover in strain-induced ferroelectric transition in SrTiO$_3$ membranes

Mechanical strain presents an effective control over symmetry-breaking phase transitions. In quantum paralelectric SrTiO3, strain can induce the ferroelectric transition via modification of local Ti potential landscape. However, brittle bulk materials can only withstand limited strain range (~0.1%). Taking advantage of nanoscopically-thin freestanding membranes, we demonstrated in-situ strain-induced reversible ferroelectric transition in a single freestanding SrTiO3 membranes. We measure the ferroelectric order by detecting the local anisotropy of the Ti 3d orbital using X-ray linear dichroism at the Ti-K pre-edge, while the strain is determined by X-ray diffraction. With reduced thickness, the SrTiO3 membranes remain elastic with >1% tensile strain cycles. A robust displacive ferroelectricity appears beyond a temperature-dependent critical strain. Interestingly, we discover a crossover from a classical ferroelectric transition to a quantum regime at low temperatures, which enhances strain-induced ferroelectricity. Our results offer a new opportunities to strain engineer functional properties in low dimensional quantum materials and provide new insights into the role of the ferroelectric fluctuations in quantum paraelectric SrTiO3.

cond-mat.mtrl-sci↗

arXiv2024

Electron ptychography reveals a ferroelectricity dominated by anion displacements

Sodium niobate, a lead-free ferroic material, hosts delicately-balanced, competing order parameters, including ferroelectric states that can be stabilized by epitaxial strain. Here, we show that the resulting macroscopic ferroelectricity exhibits an unconventional microscopic structure using multislice electron ptychography. This technique overcomes multiple scattering artifacts limiting conventional electron microscopy, enabling both lateral spatial resolution beyond the diffraction limit and recovery of three-dimensional structural information. These imaging capabilities allow us to separate the ferroelectric interior of the sample from the relaxed surface structure and identify the soft phonon mode and related structural distortions with picometer precision. Unlike conventional ferroelectric perovskites, we find that the polar distortion in this material involves minimal distortions of the cation sublattices and is instead dominated by anion displacements relative to the niobium sublattice. We establish limits on film thickness for interfacial octahedral rotation engineering and directly visualize a random octahedral rotation pattern, arising from the flat dispersion of the associated phonon mode.

cond-mat.mtrl-sci↗

arXiv2024

Highly confined epsilon-near-zero- and surface-phonon polaritons in SrTiO3 membranes

Recent theoretical studies have suggested that transition metal perovskite oxide membranes can enable surface phonon polaritons in the infrared range with low loss and much stronger subwavelength confinement than bulk crystals. Such modes, however, have not been experimentally observed so far. Here, using a combination of far-field Fourier-transform infrared (FTIR) spectroscopy and near-field synchrotron infrared nanospectroscopy (SINS) imaging, we study the phonon-polaritons in a 100 nm thick freestanding crystalline membrane of SrTiO3 transferred on metallic and dielectric substrates. We observe a symmetric-antisymmetric mode splitting giving rise to epsilon-near-zero and Berreman modes as well as highly confined (by a factor of 10) propagating phonon polaritons, both of which result from the deep-subwavelength thickness of the membranes. Theoretical modeling based on the analytical finite-dipole model and numerical finite-difference methods fully corroborate the experimental results. Our work reveals the potential of oxide membranes as a promising platform for infrared photonics and polaritonics.

cond-mat.mtrl-sci↗

arXiv2023

Emergent chirality in a polar meron to skyrmion phase transition

Polar skyrmions are predicted to emerge from the interplay of elastic, electrostatic and gradient energies, in contrast to the key role of the anti-symmetric Dzyalozhinskii-Moriya interaction in magnetic skyrmions. With the discovery of topologically-stable polar skyrmions, it is of both fundamental and practical interest to understand the microscopic nature and the possibility of temperature- and strain-driven phase transitions in ensembles of such polar skyrmions. Here, we explore the reversible transition from a skyrmion state (topological charge of -1) to a two-dimensional, tetratic lattice of merons (with topological charge of -1/2) upon varying the temperature and elastic boundary conditions in [(PbTiO3)16/(SrTiO3)16]8 lifted-off membranes. This topological phase transition is accompanied by a change in chirality, from zero-net chirality (in meronic phase) to net-handedness (in skyrmionic phase). To map these changes microscopically required developing new imaging methods. We show how scanning convergent beam electron diffraction provides a robust measure of the local polarization simultaneously with the strain state at sub-nm resolution, while also directly mapping the chirality of each skyrmion. Using this, we demonstrate strain as a crucial order parameter to drive isotropic-to-anisotropic structural transitions of chiral polar skyrmions to non-chiral merons, validated with X-ray reciprocal space mapping and theoretical phase-field simulations. These results revealed by our new measurement methods provide the first illustration of systematic control of rich variety of topological dipole textures by altering the mechanical boundary conditions, which may offer a promising way to control their functionalities in ferroelectric nanodevices using the local and spatial distribution of chirality and order.

cond-mat.mes-hall↗

arXiv2021

Fracture and Fatigue of Thin Crystalline SrTiO$_3$ Membranes

The increasing availability of a variety of two-dimensional materials has generated enormous growth in the field of nanoengineering and nanomechanics. Recent developments in thin film synthesis have enabled the fabrication of freestanding functional oxide membranes that can be readily incorporated in nanomechanical devices. While many oxides are extremely brittle in bulk, recent studies have shown that, in thin membrane form, they can be much more robust to fracture as compared to their bulk counterparts. Here, we investigate the ultimate tensile strength of SrTiO$_3$ membranes by probing freestanding SrTiO$_3$ drumheads using an atomic force microscope. We demonstrate that SrTiO$_3$ membranes can withstand an elastic deformation with an average strain of ~6% in the sub-20 nm thickness regime, which is more than an order of magnitude beyond the bulk limit. We also show that these membranes are highly resilient upon a high cycle fatigue test, surviving up to a billion cycles of force modulation at 85% of their fracture strain, demonstrating their high potential for use in nanomechanical applications.

physics.app-ph↗

arXiv2020

Strain-Induced Room-Temperature Ferroelectricity in SrTiO$_3$ Membranes

Advances in complex oxide heteroepitaxy have highlighted the enormous potential of utilizing strain engineering via lattice mismatch to control ferroelectricity in thin-film heterostructures. This approach, however, lacks the ability to produce large and continuously variable strain states, thus limiting the potential for designing and tuning the desired properties of ferroelectric films. Here, we observe and explore dynamic strain-induced ferroelectricity in SrTiO$_3$ by laminating freestanding oxide films onto a stretchable polymer substrate. Using a combination of scanning probe microscopy, optical second harmonic generation measurements, and atomistic modeling, we demonstrate robust room-temperature ferroelectricity in SrTiO$_3$ with 2.0% uniaxial tensile strain, corroborated by the notable features of 180° ferroelectric domains and an extrapolated transition temperature of 400 K. Our work reveals the enormous potential of employing oxide membranes to create and enhance ferroelectricity in environmentally benign lead-free oxides, which hold great promise for applications ranging from non-volatile memories and microwave electronics.

cond-mat.mtrl-sci↗

arXiv2017

Differential voltage amplification from ferroelectric negative capacitance

It is well known that one needs an external source of energy to provide voltage amplification. Because of this, conventional circuit elements such as resistors, inductors or capacitors cannot provide amplification all by themselves. Here, we demonstrate that a ferroelectric can cause a differential amplification without needing such an external energy source. As the ferroelectric switches from one polarization state to the other, a transfer of energy takes place from the ferroelectric to the dielectric, determined by the ratio of their capacitances, which, in turn, leads to the differential amplification. {This amplification is very different in nature from conventional inductor-capacitor based circuits where an oscillatory amplification can be observed. The demonstration of differential voltage amplification from completely passive capacitor elements only, has fundamental ramifications for next generation electronics.

cond-mat.mes-hall↗

arXiv2016

Self-Assembled, Nanostructured, Tunable Metamaterials via Spinodal Decomposition

Self-assembly via nanoscale phase-separation offers an elegant route to fabricate nanocomposites with physical properties unattainable in single-component systems. One important class of nanocomposites are optical metamaterials which exhibit exotic properties and lead to opportunities for agile control of light propagation. Such metamaterials are typically fabricated via expensive and hard-to-scale top-down processes requiring precise integration of dissimilar materials. In turn, there is a need for alternative, more efficient routes to fabricate large-scale metamaterials for practical applications with deep-subwavelength resolution. Here, we demonstrate a bottom-up approach to fabricate scalable nanostructured metamaterials via spinodal decomposition. To demonstrate the potential of such an approach, we leverage the innate spinodal decomposition of the VO2-TiO2 system, the metal-to-insulator transition in VO2, and thin-film epitaxy, to produce self-organized nanostructures with coherent interfaces and a structural unit cell down to 15 nm (tunable between horizontally- and vertically-aligned lamellae) wherein the iso-frequency surface is temperature-tunable from elliptic- to hyperbolic-dispersion producing metamaterial behavior. These results provide an efficient route for the fabrication of nanostructured metamaterials and other nanocomposites for desired functionalities.

cond-mat.mtrl-sci↗

arXiv2016

Single Gate P-N Junctions in Graphene-Ferroelectric Devices

Graphene's linear dispersion relation and the attendant implications for bipolar electronics applications have motivated a range of experimental efforts aimed at producing p-n junctions in graphene. Here we report electrical transport measurements of graphene p-n junctions formed via simple modifications to a PbZr$_{0.2}$Ti$_{0.8}$O$_3$ substrate, combined with a self-assembled layer of ambient environmental dopants. We show that the substrate configuration controls the local doping region, and that the p-n junction behavior can be controlled with a single gate. Finally, we show that the ferroelectric substrate induces a hysteresis in the environmental doping which can be utilized to activate and deactivate the doping, yielding an `on-demand' p-n junction in graphene controlled by a single, universal backgate.

cond-mat.mtrl-sci↗