arXiv subjects

Ruisi He

Publications and source records attributed to Ruisi He.

At least 55 records · Page 3Linked to original sources

arXiv2023

Throughput Maximization for Intelligent Refracting Surface Assisted mmWave High-Speed Train Communications

With the increasing demands from passengers for data-intensive services, millimeter-wave (mmWave) communication is considered as an effective technique to release the transmission pressure on high speed train (HST) networks. However, mmWave signals ncounter severe losses when passing through the carriage, which decreases the quality of services on board. In this paper, we investigate an intelligent refracting surface (IRS)-assisted HST communication system. Herein, an IRS is deployed on the train window to dynamically reconfigure the propagation environment, and a hybrid time division multiple access-nonorthogonal multiple access scheme is leveraged for interference mitigation. We aim to maximize the overall throughput while taking into account the constraints imposed by base station beamforming, IRS discrete phase shifts and transmit power. To obtain a practical solution, we employ an alternating optimization method and propose a two-stage algorithm. In the first stage, the successive convex approximation method and branch and bound algorithm are leveraged for IRS phase shift design. In the second stage, the Lagrangian multiplier method is utilized for power allocation. Simulation results demonstrate the benefits of IRS adoption and power allocation for throughput improvement in mmWave HST networks.

cs.IT↗

arXiv2023

Reconfigurable Intelligent Surface Assisted High-Speed Train Communications: Coverage Performance Analysis and Placement Optimization

Reconfigurable intelligent surface (RIS) emerges as an efficient and promising technology for the next wireless generation networks and has attracted a lot of attention owing to the capability of extending wireless coverage by reflecting signals toward targeted receivers. In this paper, we consider a RIS-assisted high-speed train (HST) communication system to enhance wireless coverage and improve coverage probability. First, coverage performance of the downlink single-input-single-output system is investigated, and the closed-form expression of coverage probability is derived. Moreover, travel distance maximization problem is formulated to facilitate RIS discrete phase design and RIS placement optimization, which is subject to coverage probability constraint. Simulation results validate that better coverage performance and higher travel distance can be achieved with deployment of RIS. The impacts of some key system parameters including transmission power, signal-to-noise ratio threshold, number of RIS elements, number of RIS quantization bits, horizontal distance between base station and RIS, and speed of HST on system performance are investigated. In addition, it is found that RIS can well improve coverage probability with limited power consumption for HST communications.

cs.IT↗

arXiv2023

Robust Train-to-Train Transmission Scheduling in mmWave Band for High Speed Train Communication Systems

Demands for data traffic in high-speed railway (HSR) has increased drastically. The increasing entertainment needs of passengers, safety control information exchanges of trains, etc., make train-to-train (T2T) communications face the challenge of achieving high-capacity and high-quality data transmissions. In order to greatly increase the communication capacity, it is urgent to introduce millimeter wave (mmWave) technology. Faced with the problem that mmWave link is easy to be blocked, this paper leverages the existing equipment to assist relay, and proposes an effective transmission scheduling scheme to improve the robustness of T2T communication systems. First of all, we formulate a mixed integer nonlinear programming (MINLP) optimization problem the transmission scheduling in T2T communication systems where mobile relays (MRs) are all working in the full-duplex (FD) mode. Then we propose a low complexity heuristic algorithm to solve the optimization problem, which consists of three components: relay selection, transmission mode selection, and transmission scheduling. The simulation results show that the proposed algorithm can greatly improve the number of completed flows and system throughput. Finally, we analyze the influence of different design parameters on the system performance. The results show that the proposed algorithm can achieve more data flows and system throughput within a reasonable communication distance threshold in T2T communication with obstacles in different orbits. It can balance the computational complexity and system performance to achieve an efficient and robust data transmission.

cs.IT↗

arXiv2023

Joint Design of Access and Backhaul in Densely Deployed MmWave Small Cells

With the rapid growth of mobile data traffic, the shortage of radio spectrum resource has become increasingly prominent. Millimeter wave (mmWave) small cells can be densely deployed in macro cells to improve network capacity and spectrum utilization. Such a network architecture is referred to as mmWave heterogeneous cellular networks (HetNets). Compared with the traditional wired backhaul, The integrated access and backhaul (IAB) architecture with wireless backhaul is more flexible and cost-effective for mmWave HetNets. However, the imbalance of throughput between the access and backhaul links will constrain the total system throughput. Consequently, it is necessary to jointly design of radio access and backhaul link. In this paper, we study the joint optimization of user association and backhaul resource allocation in mmWave HetNets, where different mmWave bands are adopted by the access and backhaul links. Considering the non-convex and combinatorial characteristics of the optimization problem and the dynamic nature of the mmWave link, we propose a multi-agent deep reinforcement learning (MADRL) based scheme to maximize the long-term total link throughput of the network. The simulation results show that the scheme can not only adjust user association and backhaul resource allocation strategy according to the dynamics in the access link state, but also effectively improve the link throughput under different system configurations.

cs.IT↗

arXiv2023

Joint Optimization of Resource Allocation and User Association in Multi-Frequency Cellular Networks Assisted by RIS

Due to the development of communication technology and the rise of user network demand, a reasonable resource allocation for wireless networks is the key to guaranteeing regular operation and improving system performance. Various frequency bands exist in the natural network environment, and heterogeneous cellular network (HCN) has become a hot topic for current research. Meanwhile, Reconfigurable Intelligent Surface (RIS) has become a key technology for developing next-generation wireless networks. By modifying the phase of the incident signal arriving at the RIS surface, RIS can improve the signal quality at the receiver and reduce co-channel interference. In this paper, we develop a RIS-assisted HCN model for a multi-base station (BS) multi-frequency network, which includes 4G, 5G, millimeter wave (mmwave), and terahertz networks, and considers the case of multiple network coverage users, which is more in line with the realistic network characteristics and the concept of 6G networks. We propose the optimization objective of maximizing the system sum rate, which is decomposed into two subproblems, i.e., the user resource allocation and the phase shift optimization problem of RIS components. Due to the NP-hard and coupling relationship, we use the block coordinate descent (BCD) method to alternately optimize the local solutions of the coalition game and the local discrete phase search algorithm to obtain the global solution. In contrast, most previous studies have used the coalition game algorithm to solve the resource allocation problem alone. Simulation results show that the algorithm performs better than the rest of the algorithms, effectively improves the system sum rate, and achieves performance close to the optimal solution of the traversal algorithm with low complexity.

cs.IT↗

arXiv2023

Joint Optimization of Relay Selection and Transmission Scheduling for UAV-Aided mmWave Vehicular Networks

To deal with the explosive growth of mobile traffic, millimeter-wave (mmWave) communications with abundant bandwidth resources have been applied to vehicular networks. As mmWave signal is sensitive to blockage, we introduce the unmanned aerial vehicle (UAV)-aided two-way relaying system for vehicular connection enhancement and coverage expansion. How to improve transmission efficiency and to reduce latency time in such a dynamic scenario is a challenging problem. In this paper, we formulate the joint optimization problem of relay selection and transmission scheduling, aiming to reduce transmission time while meeting the throughput requirements. To solve this problem, two schemes are proposed. The first one is the random relay selection with concurrent scheduling (RCS), a low-complexity algorithm implemented in two steps. The second one is the joint relay selection with dynamic scheduling (JRDS), which fully avoids relay contentions and exploits potential concurrent ability, to obtain further performance enhancement over RCS. Through extensive simulations under different environments with various flow numbers and vehicle speeds, we demonstrate that both RCS and JRDS schemes outperform the existing schemes significantly in terms of transmission time and network throughput. We also analyze the impact of threshold selection on achievable performance.

cs.IT↗

arXiv2022

Doppler Shift and Channel Estimation for Intelligent Transparent Surface Assisted Communication Systems on High-Speed Railways

The critical distinction between the emerging intelligent transparent surface (ITS) and intelligent reflection surface (IRS) is that the incident signals can penetrate the ITS instead of being reflected, which enables the ITS to combat the severe signal penetration loss for high-speed railway (HSR) wireless communications. This paper thus investigates the channel estimation problem for an ITS-assisted HSR network where the ITS is embedded into the carriage window. We first formulate the channels as functions of physical parameters, and thus transform the channel estimation into a parameter recovery problem. Next, we design the first two pilot blocks within each frame and develop a serial low-complexity channel estimation algorithm. Specifically, the channel estimates are initially obtained, and each estimate is further expressed as the sum of its perfectly known value and the estimation error. By leveraging the relationship between channels for the two pilot blocks, we recover the Doppler shifts from the channel estimates, based on which we can further acquire other channel parameters. Moreover, the Cramer-Rao lower bound (CRLB) for each parameter is derived as a performance benchmark. Finally, we provide numerical results to establish the effectiveness of our proposed estimators.

cs.IT↗

arXiv2022

5G for Railways: the Next Generation Railway Dedicated Communications

To overcome increasing traffic, provide various new services, further ensure safety and security, significantly improve travel comfort, a new communication system for railways is required. Since 2019, public networks have been evolving to the fifth generation communication (5G) worldwide, whereas the main communication system of railway is still based on the second generation communication (2G). It is thus necessary for railways to replace the current 2G-based technology with the next generation railway dedicated communication system with improved capacity and capability, and the 5G for railways (5G-R) technology is a promising solution for further intelligent railways. This article gives a review of the current developments of the next generation railway communications, followed by a discussion of the typical services that the 5G-R can provide to intelligent railways. Then, main application scenarios of 5G-R are summarized and system configurations are compared. Some key technologies of 5G-R such as network architecture, massive MIMO, millimeter-wave, multiple access scheme, ultra-reliable low latency communication, and advanced video processing are presented and analyzed. Finally, some challenges of 5G-R are highlighted.

eess.SY↗

arXiv2022

Content Distribution based on Joint V2I and V2V Scheduling in mmWave Vehicular Networks

With the explosive growth of vehicle applications, vehicular networks based on millimeter wave (mmWave) bands have attracted interests from both academia and industry. mmWave communications are able to utilize the huge available bandwidth to provide multiple Gbps transmission rates among vehicles. In this paper, we address the content distribution scheduling problem in mmWave vehicular networks. It has been challenging for all vehicles in the same network to complete content downloading due to the limited communication resources of roadside units (RSUs) and the high mobility of vehicles. We propose a joint vehicle-to-infrastructure (V2I) and vehicle-tovehicle (V2V) scheduling scheme to minimize the total number of content distribution time slots from a global optimization perspective. In the V2I phase, the RSU serially transmits integrity content to vehicles, which are selected according to the vehicular network topology and transmission scheduling scheme. In the V2V phase, full-duplex communications and concurrent transmissions are exploited to achieve content sharing between vehicles and improve transmission efficiency. Performance evaluations demonstrate that our proposed scheme reduces the number of time slots and significantly improves system throughput when compared with other schemes, especially under large-size file transfers and a large number of vehicles.

cs.IT↗

arXiv2022

Coverage Probability Analysis of RIS-Assisted High-Speed Train Communications

Reconfigurable intelligent surface (RIS) has received increasing attention due to its capability of extending cell coverage by reflecting signals toward receivers. This paper considers a RIS-assisted high-speed train (HST) communication system to improve the coverage probability. We derive the closed-form expression of coverage probability. Moreover, we analyze impacts of some key system parameters, including transmission power, signal-to-noise ratio threshold, and horizontal distance between base station and RIS. Simulation results verify the efficiency of RIS-assisted HST communications in terms of coverage probability.

cs.IT↗

arXiv2021

A Scheme of Channel Prediction Based on Artificial Neural Network

Accurate channel modeling is the foundation of communication system design. However, the traditional measurement-based modeling approach has increasing challenges for the scenarios with insufficient measurement data. To obtain enough data for channel modeling, the Artificial Neural Network (ANN) is used in this paper to predict channel data. The high mobility railway channel is considered, which is a typical scenario where it is challenging to obtain enough data for modeling within a short sampling interval. Three types of ANNs, the Back Propagation Network, Radial Basis Function Neural Network and Extreme Learning Machine, are considered to predict channel path loss and shadow fading. The Root-Mean-Square error is used to evaluate prediction accuracy. The factors that may influence prediction accuracy are compared and discussed, including the type of network, number of neurons and proportion of training data. It is found that a larger number of neurons can significantly reduce prediction error, whereas the influence of proportion of training data is relatively small. The results can be used to improve modeling accuracy of path loss and shadow fading when measurement data is reduced.

cs.IT↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part I: Channel characterization and antenna-channel optimization

To provide higher data rates, as well as better coverage, cost efficiency, security, adaptability, and scalability, the 5G and beyond 5G networks are developed with various artificial intelligence techniques. In this two-part paper, we investigate the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. It firstly provides a comprehensive overview of ML for channel characterization and ML-based antenna-channel optimization in this first part, and then it gives a state-of-the-art literature review of channel scenario identification and channel modeling in Part II. Fundamental results and key concepts of ML for communication networks are presented, and widely used ML methods for channel data processing, propagation channel estimation, and characterization are analyzed and compared. A discussion of challenges and future research directions for ML-enabled next generation networks of the topics covered in this part rounds off the paper.

eess.SP↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part II: Scenario identification and channel modeling

This two-part paper investigates the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. In Part I, we introduced AI and ML as well as provided a comprehensive survey on ML enabled channel characterization and antenna-channel optimization, and in this part (Part II) we review state-of-the-art literature on scenario identification and channel modeling here. In particular, the key ideas of ML for scenario identification and channel modeling/prediction are presented, and the widely used ML methods for propagation scenario identification and channel modeling and prediction are analyzed and compared. Based on the state-of-art, the future challenges of AI/ML-based channel data processing techniques are given as well.

eess.SP↗

arXiv2021

Resource Allocation for Millimeter-Wave Train-Ground Communications in High-Speed Railway Scenarios

With the development of wireless communication, higher requirements arise for train-ground wireless communications in high-speed railway (HSR) scenarios. The millimeter-wave (mm-wave) frequency band with rich spectrum resources can provide users in HSR scenarios with high performance broadband multimedia services, while the full-duplex (FD) technology has become mature. In this paper, we study train-ground communication system performance in HSR scenarios with mobile relays (MRs) mounted on rooftop of train and operating in the FD mode. We formulate a nonlinear programming problem to maximize network capacity by allocation of spectrum resources. Then, we develop a sequential quadratic programming (SQP) algorithm based on the Lagrange function to solve the bandwidth allocation optimization problem for track-side base station (BS) and MRs in this mm-wave train-ground communication system. Extensive simulation results demonstrate that the proposed SQP algorithm can effectively achieve high network capacity for trainground communication in HSR scenarios while being robust to the residual self-interference (SI).

cs.IT↗

arXiv2021

Radio Communication Scenarios in 5G-Railways

With the rapid development of railways, especially high-speed railways, there is an increasingly urgent demand for new wireless communication system for railways. Taking the mature 5G technology as an opportunity, 5G-railways (5G-R) have been widely regarded as a solution to meet the diversified demands of railway wireless communications. For the design, deployment and improvement of 5G-R networks, radio communication scenario classification plays an important role, affecting channel modeling and system performance evaluation. In this paper, a standardized radio communication scenario classification, including 18 scenarios, is proposed for 5G-R. This paper analyzes the differences of 5G-R scenarios compared with the traditional cellular networks and GSM-railways, according to 5G-R requirements and the unique physical environment and propagation characteristics. The proposed standardized scenario classification helps deepen the research of 5G-R and promote the development and application of the existing advanced technologies in railways.

cs.NI↗

arXiv2020

RECOME: a New Density-Based Clustering Algorithm Using Relative KNN Kernel Density

Discovering clusters from a dataset with different shapes, densities, and scales is a known challenging problem in data clustering. In this paper, we propose the RElative COre MErge (RECOME) clustering algorithm. The core of RECOME is a novel density measure, i.e., Relative $K$ nearest Neighbor Kernel Density (RNKD). RECOME identifies core objects with unit RNKD, and {partitions} non-core objects into atom clusters by successively following higher-density neighbor relations toward core objects. Core objects and their corresponding atom clusters are then merged through $α$-reachable paths on a KNN graph. We discover that the number of clusters computed by RECOME is a step function of the $α$ parameter with jump discontinuity on a small collection of values. A fast jump discontinuity discovery (FJDD) method is proposed based on graph theory. RECOME is evaluated on both synthetic datasets and real datasets. Experimental results indicate that RECOME is able to discover clusters with different shapes, densities, and scales. It outperforms six baseline methods on both synthetic datasets and real datasets. Moreover, FJDD is shown to be effective to extract the jump discontinuity set of parameter $α$ for all tested datasets, which can ease the task of data exploration and parameter tuning.

cs.DB↗

arXiv2019

Channel Estimation for Ambient Backscatter Communication Systems with Massive-Antenna Reader

Ambient backscatter, an emerging green communication technology, has aroused great interest from both academia and industry. One open problem for ambient backscatter communication (AmBC) systems is channel estimation for a massive-antenna reader. In this paper, we focus on channel estimation problem in AmBC systems with uniform linear array (ULA) at the reader which consists of large number of antennas. We first design a two-step method to jointly estimate channel gains and direction of arrivals (DoAs), and then refine the estimates through angular rotation. Additionally, Cramer-Rao lower bounds (CRLBs) are derived for both the modulus of the channel gain and the DoA estimates. Simulations are then provided to validate the analysis, and to show the efficiency of the proposed approach.

eess.SP↗

arXiv2019

Resource Allocation for Device-to-Device Communications in Multi-Cell Multi-Band Heterogeneous Cellular Networks

Heterogeneous cellular networks (HCNs) with millimeter wave (mm-wave) communications are considered as a promising technology for the fifth generation mobile networks. Mm-wave has the potential to provide multiple gigabit data rate due to the broad spectrum. Unfortunately, additional free space path loss is also caused by the high carrier frequency. On the other hand, mm-wave signals are sensitive to obstacles and more vulnerable to blocking effects. To address this issue, highly directional narrow beams are utilized in mm-wave networks. Additionally, device-to-device (D2D) users make full use of their proximity and share uplink spectrum resources in HCNs to increase the spectrum efficiency and network capacity. Towards the caused complex interferences, the combination of D2D-enabled HCNs with small cells densely deployed and mm-wave communications poses a big challenge to the resource allocation problems. In this paper, we formulate the optimization problem of D2D communication spectrum resource allocation among multiple micro-wave bands and multiple mm-wave bands in HCNs. Then, considering the totally different propagation conditions on the two bands, a heuristic algorithm is proposed to maximize the system transmission rate and approximate the solutions with sufficient accuracies. Compared with other practical schemes, we carry out extensive simulations with different system parameters, and demonstrate the superior performance of the proposed scheme. In addition, the optimality and complexity are simulated to further verify effectiveness and efficiency.

cs.NI↗