arXiv subjects

Rujing Xiong

Publications and source records attributed to Rujing Xiong.

31 records · Page 2Linked to original sources

arXiv2024

Optimal Discrete Beamforming of RIS-Aided Wireless Communications: An Inner Product Maximization Approach

This paper studies the beamforming optimization challenge in reconfigurable intelligent surface (RIS)-aided multiple-input single-output (MISO) systems, where the RIS phase configuration is discrete. Conventional optimization methods for this discrete optimization problem necessitate resource-intensive exponential search and thus fall within the universal (NP-hard) category. We formally define this task as a discrete inner product maximization problem. Leveraging the inherent structure of this problem, we propose an efficient divide-and-sort (DaS) search algorithm to reach the global optimality for the maximization problem. The complexity of the proposed algorithm can be minimized to $\mathcal{O}(2^BN)$, a linear correlation with the count of phase discrete levels $2^B$ and reflecting units $N$. This is notably lower than the exhaustive search complexity of $\mathcal{O}(2^{BN})$. Numerical evaluations and experiments over real prototype also demonstrate the efficiency of the proposed DaS algorithm. Finally, by using the proposed algorithm, we show that over some resolution quantization level on each RIS unit (4-bit and above), there is no noticeable difference in power gains between continuous and discrete phase configurations.

eess.SP↗

arXiv2024

TRTAR: Transmissive RIS-assisted Through-the-wall Human Activity Recognition

Device-free human activity recognition plays a pivotal role in wireless sensing. However, current systems often fail to accommodate signal transmission through walls or necessitate dedicated noise removal algorithms. To overcome these limitations, we introduce TRTAR: a device-free passive human activity recognition system integrated with a transmissive reconfigurable intelligent surface (RIS). TRTAR eliminates the necessity for dedicated devices or noise removal algorithms, while specifically addressing signal propagation through walls. Unlike existing approaches, TRTAR solely employs a transmissive RIS at the transmitter or receiver without modifying the inherent hardware structure. Experimental results demonstrate that TRTAR attains an average accuracy of 98.13% when signals traverse concrete walls.

eess.SY↗

arXiv2023

Fair Beam Allocations through Reconfigurable Intelligent Surfaces

A fair beam allocation framework through reconfigurable intelligent surfaces (RISs) is proposed, incorporating the Max-min criterion. This framework focuses on designing explicit beamforming functionalities through optimization. Firstly, realistic models, grounded in geometrical optics, are introduced to characterize the input/output behaviors of RISs, effectively bridging the gap between the requirements on explicit beamforming operations and their practical implementations. Then, a highly efficient algorithm is developed for Max-min optimizations involving quadratic forms. Leveraging the Moreau-Yosida approximation, we successfully reformulate the original problem and propose iterations to attain the optimal solution. A comprehensive analysis of the algorithm's convergence is provided. Importantly, this approach exhibits excellent extensibility, making it readily applicable to address a broader class of Max-min optimization problems. Finally, numerical and prototype experiments are conducted to validate the effectiveness of the framework. With the proposed beam allocation framework and algorithm, we clarify that several crucial redistribution functionalities of RISs, such as explicit beam-splitting, fair beam allocation, and wide-beam generation, can be effectively implemented. These explicit beamforming functionalities have not been thoroughly examined previously.

eess.SY↗

arXiv2023

Asymptotic CRB Analysis of Random RIS-Assisted Large-Scale Localization Systems

This paper studies the performance of a randomly RIS-assisted multi-target localization system, in which the configurations of the RIS are randomly set to avoid high-complexity optimization. We first focus on the scenario where the number of RIS elements is significantly large, and then obtain the scaling law of Cramér-Rao bound (CRB) under certain conditions, which shows that CRB decreases in the third or fourth order as the RIS dimension increases. Second, we extend our analysis to large systems where both the number of targets and sensors is substantial. Under this setting, we explore two common RIS models: the constant module model and the discrete amplitude model, and illustrate how the random RIS configuration impacts the value of CRB. Numerical results demonstrate that asymptotic formulas provide a good approximation to the exact CRB in the proposed randomly configured RIS systems.

cs.IT↗

arXiv2023

Wireless Regional Imaging through Reconfigurable Intelligent Surfaces: Passive Mode

In this paper, we propose a multi-RIS-aided wireless imaging framework in 3D facing the distributed placement of multi-sensor networks. The system creates a randomized reflection pattern by adjusting the RIS phase shift, enabling the receiver to capture signals within the designated space of interest (SoI). Firstly, a multi-RIS-aided linear imaging channel modeling is proposed. We introduce a theoretical framework of computational imaging to recover the signal strength distribution of the SOI. For the RIS-aided imaging system, the impact of multiple parameters on the performance of the imaging system is analyzed. The simulation results verify the correctness of the proposal. Furthermore, we propose an amplitude-only imaging algorithm for the RIS-aided imaging system to mitigate the problem of phase unpredictability. Finally, the performance verification of the imaging algorithm is carried out by proof of concept experiments under reasonable parameter settings.

eess.IV↗

arXiv2023

Wireless Communications in Cavity: A Reconfigurable Boundary Modulation based Approach

This paper explores the potential wireless communication applications of Reconfigurable Intelligent Surfaces (RIS) in reverberant wave propagation environments. Unlike in free space, we utilize the sensitivity to boundaries of the enclosed electromagnetic (EM) field and the equivalent perturbation of RISs. For the first time, we introduce the framework of reconfigurable boundary modulation in the cavities . We have proposed a robust boundary modulation scheme that exploits the continuity of object motion and the mutation of the codebook switch, which achieves pulse position modulation (PPM) by RIS-generated equivalent pulses for wireless communication in cavities. This approach achieves around 2 Mbps bit rate in the prototype and demonstrates strong resistance to channel's frequency selectivity resulting in an extremely low bit error rate (BER).

eess.SY↗

arXiv2023

A Wi-Fi Signal-Based Human Activity Recognition Using High-Dimensional Factor Models

Passive sensing techniques based on Wi-Fi signals have emerged as a promising technology in advanced wireless communication systems due to their widespread application and cost-effectiveness. However, the proliferation of low-cost Internet of Things (IoT) devices has led to dense network deployments, resulting in increased levels of noise and interference in Wi-Fi environments. This, in turn, leads to noisy and redundant Channel State Information (CSI) data. As a consequence, the accuracy of human activity recognition based on Wi-Fi signals is compromised. To address this issue, we propose a novel CSI data signal extraction method. We established a human activity recognition system based on the Intel 5300 network interface cards (NICs) and collected a dataset containing six categories of human activities. Using our approach, signals extracted from the CSI data serve as inputs to machine learning (ML) classification algorithms to evaluate classification performance. In comparison to ML methods based on Principal Component Analysis (PCA), our proposed High-Dimensional Factor Model (HDFM) method improves recognition accuracy by 6.8%.

eess.SY↗

arXiv2023

RIS-aided Real-time Beam Tracking for a Mobile User via Bayesian Optimization

The conventional beam management procedure mandates that the user equipment (UE) periodically measure the received signal reference power (RSRP) and transmit these measurements to the base station (BS). The challenge lies in balancing the number of beams used: it should be large enough to identify high-RSRP beams but small enough to minimize reporting overhead. This paper investigates this essential performance-versus-overhead trade-off using Bayesian optimization. The proposed approach represents the first application of real-time beam tracking via Bayesian optimization in RIS-assisted communication systems. Simulation results validate the effectiveness of this scheme.

eess.SY↗

arXiv2023

Design of Reconfigurable Intelligent Surfaces for Wireless Communication: A Review

This paper addresses the hardware structure of Reconfigurable Intelligent Surfaces (RIS) and presents a comprehensive overview of RIS design, considering both unit design and prototype systems. It commences by tracing the evolutionary trajectory of RIS, originating from static cell-structured hypersurfaces. The article conducts a meticulous examination from the standpoint of adaptability, elucidating the diverse array of unit structures and design philosophies that underlie existing RIS frameworks. Following this, the study systematically categorizes and synthesizes channel modeling research for RIS-facilitated wireless communication, leveraging both physical insights and statistical data. Additionally, the article provides a detailed exposition of current RIS experimental setups and their corresponding empirical findings, delving into the attributes of prototype design and system functionalities. Moreover, this work introduces an in-house developed RIS prototype. The prototype undergoes rigorous empirical evaluation, encompassing multi-hop RIS signal amplification, image reconstruction, and real-world indoor signal coverage experiments. The empirical results robustly affirm the efficacy of RIS in effectively mitigating signal coverage blind spots and enabling radio wave imaging. With RIS-enhanced augmentation, the average indoor signal gain surpasses 8 dB.

eess.SY↗

arXiv2023

Multi-RIS-aided Wireless Communications in Real-world: Prototyping and Field Trials

The performance of multiple reconfigurable intelligent surfaces (RISs) receives limited attention in previous studies. This article fills this research gap by investigating the capabilities of multiple RISs in real-world networks. We propose a simplified yet highly scalable sandwich architecture for implementing one-bit unit cells, with the flexibility to accommodate multi-bit unit cells. To effectively control multiple RISs, we present a cost-effective remote-controlling scheme and develop a cloud-based RIS management system. Through a series of four field trials, we demonstrate the effectiveness of multi-hop routing schemes in establishing reliable links. Our experiments reveal significant improvements in signal strength and data transmission in multi-RIS-aided Wi-Fi and commercial 5G networks. Furthermore, we investigate the power scaling law of RIS-aided beamforming and provide insights into the roles of the later nodes in multi-hop relay chains.

eess.SY↗

arXiv2022

Transforming RIS-Assisted Passive Beamforming from Tedious to Simple: A Relaxation Algorithm for Rician Channel

This paper investigates the problem of maximizing the signal-to-noise ratio (SNR) in reconfigurable intelligent surface (RIS)-assisted MISO communication systems. The problem will be reformulated as a complex quadratic form problem with unit circle constraints. We proved that the SNR maximizing problem has a closed-form global optimal solution when it is a rank-one problem, whereas the former researchers regarded it as an optimization problem. Moreover, We propose a relaxation algorithm (RA) that relaxes the constraints to that of Rayleigh's quotient problem and then projects the solution back, where the SNR obtained by RA achieves much the same SNR as the upper bound but with significantly low time consumption. Then we asymptotically analyze its performance when the transmitter antennas n_t and the number of units of RIS N grow large together, with N/n_t -> c. Finally, our numerical simulations show that RA achieves over 98% of the performance of the upper bound and takes below 1% time consumption of manifold optimization (MO) and 0.1% of semidefinite relaxation (SDR).

eess.SP↗

arXiv2022

RIS-aided Wireless Communication with $1$-bit Discrete Optimization for Signal Enhancement

In recent years, a brand-new technology, reconfigurable intelligent surface (RIS) has been widely studied for reconfiguring the wireless propagation environment. RIS is an artificial surface of electromagnetic material that is capable of customizing the propagation of the wave impinging upon it. Utilizing RIS for communication service like signal enhancement usually lead to non-convex optimization problems. Existing optimization methods either suffers from scalability issues for $N$ number of RIS elements large, or may lead to suboptimal solutions in some scenario. In this paper, we propose a divide-and-sort (DaS) discrete optimization approach, that is guaranteed to find the global optimal phase shifts for $1$-bit RIS, and has time complexity $\mathcal{O}(N \log(N))$. Numerical experiments show that the proposed approach achieves a better ``performance--complexity tradeoff'' over other methods for $1$-bit RIS.

eess.SP↗

arXiv2022

Towards Analytical Electromagnetic Models for Reconfigurable Intelligent Surfaces

Physically accurate and mathematically tractable models are presented to characterize scattering and reflection properties of reconfigurable intelligent surfaces (RISs). We take continuous and discrete strategies to model a single patch and patch array and their interactions with multiple incident electromagnetic (EM) waves. The proposed models consider the effect of the incident and scattered angles, polarization features, and the topology and geometry of RISs. Particularly, a simple system of linear equations can describe the multiple-input multiple-output (MIMO) behaviors of RISs under reasonable assumptions. It can serve as a fundamental model for analyzing and optimizing the performance of RIS-aided systems in the far-field regime. The proposed models are employed to identify the advantages and limitations of three typical configurations. One important finding is that complicated beam reshaping functionality can not be endowed by popular phase compensation configurations. A possible solution is the simultaneous configurations of collecting area and phase shifting. Numerical simulations verify the effectiveness of the proposed configuration schemes.

eess.SY↗