arXiv subjects

Rulei Guo

Publications and source records attributed to Rulei Guo.

10 recordsLinked to original sources

arXiv2026

Janus-induced atomic reconstruction amplifies twist-angle modulation of interlayer thermal transport in moir\'e bilayers

In two-dimensional moir\'e bilayers, atomic reconstruction, the spontaneous structural relaxation toward energy-minimizing stacking registries in the near-commensurate regime, can strongly modify local stacking and interlayer coupling, providing a possibility to significantly control phonon-mediated properties. Here we show that the twist-angle dependence of interlayer thermal conductance can be modified by introducing Janus-induced mirror-symmetry breaking into bilayer MoS2. The intrinsic out-of-plane dipole in MoSSe/MoS2 bilayers leads to frictionless interface, and reduces the lattice deformation energy, thereby promoting atomic-reconstruction into locally distorted aperiodic moir\'e patterns. These features weaken interlayer coupling and suppress phonon transmission across the interface, leading to an anomalously strong twist-angle dependence of thermal conductance, with a pronounced minimum at small twist angles and a reduction rate nearly one order of magnitude larger than that of twisted bilayer MoS2. Our results demonstrate that interlayer thermal transport is modified by atomic reconstruction, highlighting Janus-induced mirror-symmetry breaking as an effective way to promoting phonon engineering in two-dimensional moir\'e structures.

cond-mat.mes-hall↗

arXiv2026

Observation of coherently modulated phonon band and lifetime in superlattice

Similar to the behavior of elementary particles, such as photons and electrons, the interference of phonon waves in artificial periodic nanostructures coherently modulates phonon band structures, serving as the foundation for phonon band engineering. However, direct observation of such coherently modulated phonon band structures remains challenging despite substantial insights from existing literature. Here, utilizing high-resolution inelastic X-ray scattering, we observed coherently modulated phonon band structures with phononic band gaps in a short-period GaAs/AlAs superlattice at 300 K and 500 K. Our findings provide the first direct evidence of phonon coherence at and above room temperatures, signifying a major advancement in the artificial engineering of phonon band structures. Furthermore, our experimental observations and ab initio lattice dynamics revealed that the coherently modulated phonon band structure enhances three-phonon scattering channels, strengthening high-order anharmonic effects such as three-phonon scattering and optical phonon softening. Our observations demonstrate the robustness of phonon coherence at high temperatures, and opens new routes for engineering phonon band structure and high-order phonon-phonon scattering by employing a flexible, bottom-up nanostructuring approach, with extensive applications in phononic metamaterials, microelectronics, and thermoelectrics.

cond-mat.mtrl-sci↗

arXiv2024

Enhancing and Mapping Thermal Boundary Conductance across Bonded Si/SiC Interface

SiC is a promising substrate for Si-on-insulator (SOI) wafers for efficient thermal management owing to its high thermal conductivity and large bandgap. However, fabricating a Si device layer on a SiC substrate with a high and uniform thermal-boundary conductance (TBC) at the wafer scale is challenging. In this study, a 4-inch Si-on-SiC wafer was fabricated using a room-temperature surface-activated bonding method, and the TBC was measured using the time-domain thermoreflectance (TDTR) method. The obtained TBC was 109 MW/m2K in the as-bonded sample, improving to 293 MW/m2K after annealing at 750 oC, representing a 78% increase compared to previously reported values for a Si-SiC interface formed by bonding methods. Such enhancement is attributed to the absence of an oxide layer at the interface. Furthermore, we assessed the actual spatial distribution of the TBC in the SOI system by combining the TDTR mapping with a mathematical model to remove the influence of random errors in the experiment. The spatial distributions before and after annealing were 7% and 17%, respectively. Such variation highlights the need to consider the TBC distribution when designing thermal management systems.

cond-mat.mtrl-sci↗

arXiv2024

Low thermal boundary resistance at bonded GaN/diamond interface by controlling ultrathin heterogeneous amorphous layer

Thermal boundary resistance (TBR) in semiconductor-on-diamond structure bottlenecks efficient heat dissipation in electronic devices. In this study, to reduce the TBR between GaN and diamond, surface-activated bonding with a hybrid SiOx-Ar ion source was applied to achieve an ultrathin interfacial layer. The simultaneous surface activation and slow deposition of the SiOx binder layer enabled precise control over layer thickness (2.5-5.3 nm) and formation of an amorphous heterogeneous nanostructure comprising a SiOx region between two inter-diffusion regions. Crucially, the 2.5-nm-thick interfacial layer achieved a TBR of 8.3 m2-W/GW, a record low for direct-bonded GaN/diamond interface. A remarkable feature is that the TBR is extremely sensitive to the interfacial thickness; rapidly increasing to 34 m2-K/GW on doubling the thickness to 5.3 nm. Theoretical analysis revealed the origin of this increase: a diamond/SiOx interdiffusion layer extend the vibrational frequency, far-exceeding that of crystalline diamond, which increases the lattice vibrational mismatch and suppresses phonon transmission.

cond-mat.mtrl-sci↗

arXiv2024

Non-equilibrium Magnon Engineering Enabling Significant Thermal Transport Modulation

Thermal conductivity, a fundamental parameter characterizing thermal transport in solids, is typically determined by electron and phonon transport. Although other transport properties including electrical conductivity and thermoelectric conversion coefficients have material-specific values, it is known that thermal conductivity can be modulated artificially via phonon engineering techniques. Here, we demonstrate another way of artificially modulating the heat conduction in solids: magnonic thermal transport engineering. The time-domain thermoreflectance measurements using ferromagnetic metal/insulator junction systems reveal that the thermal conductivity of the ferromagnetic metals and interfacial thermal conductance vary significantly depending on the spatial distribution of nonequilibrium spin currents. Systematic measurements of the thermal transport properties with changing the boundary conditions for spin currents show that the observed thermal transport modulation stems from magnon origin. This observation unveils that magnons significantly contribute to the heat conduction even in ferromagnetic metals at room temperature, upsetting the conventional wisdom that the thermal conductivity mediated by magnons is very small in metals except at low temperatures. The magnonic thermal transport engineering offers a new principle and method for active thermal management.

cond-mat.mtrl-sci↗

arXiv2023

Electron-phonon coupling and non-equilibrium thermal conduction in ultrafast heating systems

The electron-phonon coupling in ultrafast heating systems is studied within the framework of Boltzmann transport equation (BTE) with coupled electron and phonon transport. A discrete unified gas kinetic scheme is developed to solve the BTE, in which the electron/phonon advection, scattering and electron-phonon interactions are coupled together within one time step by solving the BTE again at the cell interface. Numerical results show that the present scheme can correctly predict the electron-phonon coupling constant, and is in excellent agreement with typical two-temperature model (TTM) and experimental results in existing literatures and our performed time-domain thermoreflectance technique. It can also capture the ballistic or thermal wave effects when the characteristic length/time is comparable to or smaller than the mean free path/relaxation time where the TTM fails. Finally, the electron-phonon coupling in transient thermal grating geometry and Au/Pt bilayer metals with interfacial thermal resistance is simulated and discussed. For the former, heat flow from phonon to electron is predicted in both the ballistic and diffusive regimes. For the latter, the reflected signal increases in the early tens of picoseconds and then decreases with time after the heat source is removed.

cond-mat.mes-hall↗

arXiv2021

Phase-transition-induced giant Thomson effect for thermoelectric cooling

The Seebeck and Peltier effects have been widely studied and used in various thermoelectric technologies, including thermal energy harvesting and solid-state heat pumps. However, basic and applied studies on the Thomson effect, another fundamental thermoelectric effect in conductors, are limited despite the fact that the Thomson effect allows electronic cooling through the application of a temperature gradient bias rather than the construction of junction structures. In this article, we report the observation of a giant Thomson effect that appears owing to magnetic phase transitions. The Thomson coefficient of FeRh-based alloys reaches large values approaching $-$1,000 $\mu$VK$^{-1}$ around room temperature because of the steep temperature dependence of the Seebeck coefficient associated with the antiferromagnetic-ferromagnetic phase transition. The Thomson coefficient is several orders of magnitude larger than the Seebeck coefficient of the alloys. Using the active thermography technique, we demonstrate that the Thomson cooling can be much larger than Joule heating in the same material even in a nearly steady state. The operation temperature of the giant Thomson effect in the FeRh-based alloys can be tuned over a wide range by applying an external magnetic field or by slightly changing the composition. Our findings provide a new direction in the materials science of thermoelectrics and pave the way for thermal management applications using the Thomson effect.

cond-mat.mtrl-sci↗

arXiv2021

Scalable monolayer-functionalized nanointerface for thermal conductivity enhancement in copper/diamond composite

Aiming at developing high thermal conductivity copper/diamond composite, an unconventional approach applying self-assembled monolayer (SAM) prior to the high-temperature sintering of copper/diamond composite was utilized to enhance the thermal boundary conductance (TBC) between copper and diamond. The enhancement was first systematically confirmed on a model interface system by detailed SAM morphology characterization and TBC measurements. TBC significantly depends on the SAM coverage and ordering, and the formation of high-quality SAM promoted the TBC to 73 MW/m^2-K from 27 MW/m^2-K, the value without SAM. With the help of molecular dynamics simulations, the TBC enhancement was identified to be determined by the number of SAM bridges and the overlap of vibrational density of states. The diamond particles of 210 {\micro\metre} in size were simultaneously functionalized by SAM with the condition giving the highest TBC in the model system and sintered together with the copper to fabricate isotropic copper/diamond composite of 50% volume fraction. The measured thermal conductivity marked 711 W/m-K at room temperature, the highest value among the ones with similar diamond-particles volume fraction and size. This work demonstrates a novel strategy to enhance the thermal conductivity of composite materials by SAM functionalization.

cond-mat.mtrl-sci↗

arXiv2019

Thermal characterization of convective heat transfer in microwires based on modified steady state "hot wire" method

The convection plays a very important role in heat transfer when MEMS work under air environment. However, traditional measurements of convection heat transfer coefficient require the knowledge of thermal conductivity, which makes measurements complex. In this work, a modified steady state "hot wire" (MSSHW) method is proposed, which can measure the heat transfer coefficient of microwires' convection without the knowledge of thermal conductivity. To verify MSSHW method, the convection heat transfer coefficient of platinum microwires was measured in the atmosphere, whose value is in good agreement with values by both traditional measurement methods and empirical equations. Then, the convection heat transfer coefficient of microwires with different materials and diameters were measured by MSSHW. It is found that the convection heat transfer coefficient of microwire is not sensitive on materials, while it increases from 86 W/(m$^2$K) to 427 W/(m$^2$K) with the diameter of microwires decreasing from 120 ${\mu}$m to 20 ${\mu}$m. Without knowing thermal conductivity of microwires, the MSSHW method provides a more convenient way to measure the convective effect.

physics.app-ph↗

arXiv2017

Thermal Conductivity of PAAm Hydrogel and its Crosslinking Effect

As the interface between human and machine becomes blurred, hydrogel incorporated electronics and devices have emerged to be a new class of flexible/stretchable electronic and ionic devices due to their extraordinary properties, such as soft, mechanically robust and biocompatible. However, heat dissipation in these devices could be a critical issue and remains unexplored. Here, we report the experimental measurements and equilibrium molecular dynamic (EMD) simulations of thermal conduction in polyacrylamide (PAAm) hydrogels at room temperature. The thermal conductivity of the PAAm hydrogels can be modulated from 0.33 to 0.51 Wm-1K-1 by changing the crosslinking density. The crosslinking density dependent thermal conductivity in hydrogels is explained by the competition between the increased conduction pathways and the enhanced phonon scattering effect. The assumption is further supported by both the equilibrium swelling ratio measurement and molecular simulation of hydrogels. Our study offers fundamental understanding of thermal transport in soft materials and provides design guidance for hydrogel-based devices.

cond-mat.soft↗