SearcharxivSearch

arXiv subjects

Ruoguang Li

Publications and source records attributed to Ruoguang Li.

15 recordsLinked to original sources

CRLB and Parameter Estimation for OFDM-ISAC with Non-Uniform Sparse Resource Allocation

Integrated sensing and communication (ISAC) holds great promise in expanding the applications of wireless communication networks. However, in current communication-centric systems, the time-frequency resources available for sensing may be limited, and also usually non-uniformly and sparsely distributed across the time-frequency domain. Such a non-uniformity destroys the "thumbtack-shaped" ambiguity function of the orthogonal frequency division multiplexing (OFDM) waveform, leading to degraded sensing performance. To this end, this paper explores the parameter estimation algorithm for OFDM-ISAC systems with non-uniform sparse resource allocation. Specifically, for the single target case, we derive the closed-form Cramer-Rao lower bound (CRLB) for parameter estimation as a function of resource indices. Furthermore, we show that simply filling unused resource locations with zeros and applying the classic periodogram estimation is equivalent to maximum likelihood (ML) estimation, which is asymptotically optimal. For the multi-target case, we generate a virtual resource using the autocorrelation function of the original signal, which exhibits a significantly larger virtual bandwidth compared to the original signal, at the cost of higher peak-to-sidelobe ratio (PSLR). Simulation results demonstrate that the proposed approach outperforms the conventional periodogram method for non-uniform sparse resource allocation.

eess.SP

Millimeter-Wave Position Sensing Using Reconfigurable Intelligent Surfaces: Positioning Error Bound and Phase Shift Configuration

Millimeter-wave (mmWave) positioning has emerged as a promising technology for next-generation intelligent systems. The advent of reconfigurable intelligent surfaces (RISs) has revolutionized high-precision mmWave localization by enabling dynamic manipulation of wireless propagation environments. This paper investigates a three-dimensional (3D) multi-input single-output (MISO) mmWave positioning system assisted by multiple RISs. We introduce a measurement framework incorporating sequential RIS activation and directional beamforming to fully exploit virtual line-of-sight (VLoS) paths. The theoretical performance limits are rigorously analyzed through derivation of the Fisher information and subsequent positioning error bound (PEB). To minimize the PEB, two distinct optimization approaches are proposed for continuous and discrete phase shift configurations of RISs. For continuous phase shifts, a Riemannian manifold-based optimization algorithm is proposed. For discrete phase shifts, a heuristic algorithm incorporating the grey wolf optimizer is proposed. Extensive numerical simulations demonstrate the effectiveness of the proposed algorithms in reducing the PEB and validate the improvement in positioning accuracy achieved by multiple RISs.

eess.SP

Coverage Probability and Average Rate Analysis of Hybrid Cellular and Cell-free Network

Cell-free wireless networks deploy distributed access points (APs) to simultaneously serve user equipments (UEs) across the service region and are regarded as one of the most promising network architectural paradigms. Despite recent advances in the performance analysis and optimization of cellfree wireless networks, it remains an open question whether large-scale deployment of APs in existing wireless networks can cost-effectively achieve communication capacity growth. Besides, the realization of a cell-free network is considered to be a gradual long-term evolutionary process in which cell-free APs will be incrementally introduced into existing cellular networks, and form a hybrid communication network with the existing cellular base stations (BSs). Such a collaboration will bridge the gap between the established cellular network and the innovative cellfree network. Therefore, hybrid cellular and cell-free networks (HCCNs) emerge as a practical and feasible solution for advancing cell-free network development, and it is worthwhile to further explore its performance limits. This paper presents a stochastic geometry-based hybrid cellular and cell-free network model to analyze the distributions of signal and interference and reveal their mutual coupling. Specifically, in order to benefit the UEs from both the cellular BSs and the cell-free APs, a conjugate beamforming design is employed, and the aggregated signal is analyzed using moment matching. Then, the coverage probability of the hybrid network is characterized by deriving the Laplace transforms and their higher-order derivatives of interference components. Furthermore, the average achievable rate of the hybrid network over channel fading is derived based on the interference coupling analysis.

eess.SP

A Fingerprint Database Generation Method for RIS-Assisted Indoor Positioning

Reconfigurable intelligent surface (RIS) has emerged as a promising technology to enhance indoor wireless communication and sensing performance. However, the construction of reliable received signal strength (RSS)-based fingerprint databases for RIS-assisted indoor positioning remains an open challenge due to the lack of realistic and spatially consistent channel modeling methods. In this paper, we propose a novel method with open-source code for generating RIS-assisted RSS fingerprint databases. Our method captures the complex RIS-assisted multipath behaviors by extended cluster-based channel modeling and the physical and electromagnetic properties of RIS and transmitter (Tx). And the spatial consistency is incorporated when simulating the fingerprint data collection across neighboring positions. Moreover, an effective sorting algorithm is proposed to solve the online synchronization issue, a closed-form RIS phase configuration strategy is proposed to improve the localization accuracy, and the modeling method of mutual coupling (MC) effect is provided. Extensive simulations are conducted to evaluate the fingerprint database generated by the proposed method. And the positioning performance on the database using different algorithms is analyzed, providing valuable insights for the system design.

eess.SP

Supporting Urban Low-Altitude Economy: Channel Gain Map Inference Based on 3D Conditional GAN

The advancement of advanced air mobility (AAM) in recent years has given rise to the concept of low-altitude economy (LAE). However, the diverse flight activities associated with the emerging LAE applications in urban scenarios confront complex physical environments, which urgently necessitates ubiquitous and reliable communication to guarantee the operation safety of the low-altitude aircraft. As one of promising technologies for the sixth generation (6G) mobile networks, channel knowledge map (CKM) enables the environment-aware communication by constructing a site-specific dataset, thereby providing a priori on-site information for the aircraft to obtain the channel state information (CSI) at arbitrary locations with much reduced online overhead. Diverse base station (BS) deployments in the three-dimensional (3D) urban low-altitude environment require efficient 3D CKM construction to capture spatial channel characteristics with less overhead. Towards this end, this paper proposes a 3D channel gain map (CGM) inference method based on a 3D conditional generative adversarial network (3D-CGAN). Specifically, we first analyze the potential deployment types of BSs in urban low-altitude scenario, and investigate the CGM representation with the corresponding 3D channel gain model. The framework of the proposed 3D-CGAN is then discussed, which is trained by a dataset consisting of existing CGMs. Consequently, the trained 3D-CGAN is capable of inferring the corresponding CGM only based on the BS coordinate without additional measurement. The simulation results demonstrate that the CGMs inferred by the proposed 3D-CGAN outperform those of the benchmark schemes, which can accurately reflect the radio propagation condition in 3D environment.

eess.SP

Integrated Localization and Communication with Sparse MIMO: Will Virtual Array Technology also Benefit Wireless Communication?

For the 6G wireless networks, achieving high-performance integrated localization and communication (ILAC) is critical to unlock the full potential of wireless networks. To simultaneously enhance localization and communication performance cost-effectively, this paper proposes sparse multiple-input multiple-output (MIMO) based ILAC with nested and co-prime sparse arrays deployed at the base station. Sparse MIMO relaxes the traditional half-wavelength antenna spacing constraint to enlarge the antenna aperture, thus enhancing localization degrees of freedom and providing finer spatial resolution. However, it also leads to undesired grating lobes, which may cause severe inter-user interference for communication and angular ambiguity for localization. While the latter issue can be effectively addressed by the virtual array technology, by forming sum or difference co-arrays via signal (conjugate) correlation among array elements, it is unclear whether the similar virtual array technology also benefits wireless communications for ILAC systems. In this paper, we first reveal that the answer to the above question is negative, by showing that forming virtual arrays for wireless communication will cause destruction of phase information, degradation of signal-to-noise ratio and aggravation of multi-user interference. Therefore, we propose the hybrid processing for sparse MIMO based ILAC, i.e., physical array based communication while virtual array based localization. To this end, we characterize the beam pattern of sparse arrays by three metrics, demonstrating that despite of the introduction of grating lobes, sparse arrays can also bring benefits to communications thanks to its narrower main lobe beam width than the conventional compact arrays. Extensive simulation results are presented to demonstrate the performance gains of sparse MIMO based ILAC over that based on the conventional compact MIMO.

eess.SP

Toward Adaptive Tracking and Communication via an Airborne Maneuverable Bi-Static ISAC System

In this letter, we propose an airborne maneuverable bi-static integrated sensing and communication system where both the transmitter and receiver are unmanned aerial vehicles. By timely forming a dynamic bi-static range based on the motion information of the target, such a system can provide an adaptive two dimensional tracking and communication services. Towards this end, a trajectory optimization problem for both transmits and receive UAV is formulated to achieve high-accurate motion state estimation by minimizing the time-variant Cramer Rao bound, subject to the sufficient communication signal-to-noise ratio to maintain communication channel prediction error. Then we develop an efficient approach based on the successive convex approximation technique and the S-procedure to address the problem. Numerical results demonstrate that our proposed airborne maneuverable bi-static ISAC system is able to obtain higher tracking accuracy compared with the static or semi-dynamic ISAC system.

eess.SP

Integrated Sensing and Communication with Nested Array: Beam Pattern and Performance Analysis

Towards the upcoming 6G wireless networks, integrated sensing and communication (ISAC) has been identified as one of the typical usage scenarios. To further enhance the performance of ISAC, increasing the number of antennas as well as array aperture is one of the effective approaches. However, simply increasing the number of antennas will increase the cost of radio frequency chains and power consumption. To address this issue, in this paper, we consider an uplink ISAC system with nested array deployed at the base station. Nested array is a classic sparse array architecture that is able to enlarge the array aperture without increasing the number of physical antennas. While nested array for wireless sensing has been extensively studied, its potential for ISAC system has not been fully exploited. To fill this gap, in this paper, we provide the beam pattern analysis of nested arrays, and derive the closed-form expressions for the three beam pattern metrics, namely, the main lobe beam width, peak-to-local-minimum ratio, and prominent side lobes height. Extensive simulation results are provided to show that compared with conventional uniform arrays, nested arrays can achieve higher communication performance for densely located users while maintaining its advantage of sensing.

cs.IT

Coordinated RSMA for Integrated Sensing and Communication in Emergency UAV Systems

Recently, unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC) is emerging as a promising technique for achieving robust and rapid emergency response capabilities. Such a novel framework offers high-quality and cost-efficient C\&S services due to the intrinsic flexibility and mobility of UAVs. In parallel, rate-splitting multiple access (RSMA) is able to achieve a tailor-made communication by splitting the messages into private and common parts with adjustable rates, making it suitable for on-demand data transmission in disaster scenarios. In this paper, we propose a coordinated RSMA for integrated sensing and communication (CoRSMA-ISAC) scheme in emergency UAV system to facilitate search and rescue operations, where a number of ISAC UAVs simultaneously communicate with multiple communication survivors (CSs) and detect a potentially trapped survivor (TS) in a coordinated manner. Towards this end, an optimization problem is formulated to maximize the weighted sum rate (WSR) of the system, subject to the sensing signal-to-noise ratio (SNR) requirement. In order to solve the formulated non-convex problem, we first decompose it into three subproblems, i.e., UAV-CS association, UAV deployment, as well as beamforming optimization and rate allocation. Subsequently, we introduce an iterative optimization approach leveraging K-Means, successive convex approximation (SCA), and semi-definite relaxation (SDR) algorithms to reframe the subproblems into a more tractable form and efficiently solve them. Simulation results demonstrate that the proposed CoRSMA-ISAC scheme is superior to conventional space division multiple access (SDMA), non-orthogonal multiple access (NOMA), and orthogonal multiple access (OMA) in terms of both communication and sensing performance.

eess.SP

Performance Analysis of Hybrid Cellular and Cell-free MIMO Network

Cell-free wireless communication is envisioned as one of the most promising network architectures, which can achieve stable and uniform communication performance while improving the system energy and spectrum efficiency. The deployment of cell-free networks is envisioned to be a longterm evolutionary process, in which cell-free access points (APs) will be gradually introduced into the communication network and collaborate with the existing cellular base stations (BSs). To further explore the performance limits of hybrid cellular and cell-free networks, this paper develops a hybrid network model based on stochastic geometric toolkits, which reveals the coupling of the signal and interference from both the cellular and cell-free networks. Specifically, the conjugate beamforming is applied in hybrid cellular and cell-free networks, which enables user equipment (UE) to benefit from both cellular BSs and cell-free APs. The aggregate signal received from the hybrid network is approximated via moment matching, and coverage probability is characterized by deriving the Laplace transform of the interference. The analysis of signal strength and coverage probability is verified by extensive simulations.

eess.SP

An Improved Virtual Force Approach for UAV Deployment and Resource Allocation in Emergency Communications

In this paper, we consider an unmanned aerial vehicle (UAV)-enabled emergency communication system, which establishes temporary communication link with users equipment (UEs) in a typical disaster environment with mountainous forest and obstacles. Towards this end, a joint deployment, power allocation, and user association optimization problem is formulated to maximize the total transmission rate, while considering the demand of each UE and the disaster environment characteristics. Then, an alternating optimization algorithm is proposed by integrating coalition game and virtual force approach which captures the impact of the demand priority of UEs and the obstacles to the flight path and consumed power. Simulation results demonstrate that the computation time consumed by our proposed algorithm is only $5.6\%$ of the traditional heuristic algorithms, which validates its effectiveness in disaster scenarios.

cs.NI

UAV-assisted Emergency Integrated Sensing and Communication Networks: A CNN-based Rapid Deployment Approach

UAV-assisted integrated sensing and communication (ISAC) network is crucial for post-disaster emergency rescue. The speed of UAV deployment will directly impact rescue results. However, the ISAC UAV deployment in emergency scenarios is difficult to solve, which contradicts the rapid deployment. In this paper, we propose a two-stage deployment framework to achieve rapid ISAC UAV deployment in emergency scenarios, which consists of an offline stage and an online stage. Specifically, in the offline stage, we first formulate the ISAC UAV deployment problem and define the ISAC utility as the objective function, which integrates communication rate and localization accuracy. Secondly, we develop a dynamic particle swarm optimization (DPSO) algorithm to construct an optimized UAV deployment dataset. Finally, we train a convolutional neural network (CNN) model with this dataset, which replaces the time-consuming DPSO algorithm. In the online stage, the trained CNN model can be used to make quick decisions for the ISAC UAV deployment. The simulation results indicate that the trained CNN model achieves superior ISAC performance compared to the classic particle swarm optimization algorithm. Additionally, it significantly reduces the deployment time by more than 96%.

cs.NI

Rate-Region Characterization and Channel Estimation for Cell-Free Symbiotic Radio Communications

Cell-free massive MIMO and symbiotic radio communication have been recently proposed as the promising beyond fifth-generation (B5G) networking architecture and transmission technology, respectively. To reap the benefits of both, this paper studies cell-free symbiotic radio communication systems, where a number of cell-free access points (APs) cooperatively send primary information to a receiver, and simultaneously support the passive backscattering communication of the secondary backscatter device (BD). We first derive the achievable communication rates of the active primary user and passive secondary user under the assumption of perfect channel state information (CSI), based on which the transmit beamforming of the cellfree APs is optimized to characterize the achievable rate-region of cell-free symbiotic communication systems. Furthermore, to practically acquire the CSI of the active and passive channels, we propose an efficient channel estimation method based on two-phase uplink-training, and the achievable rate-region taking into account CSI estimation errors are further characterized. Simulation results are provided to show the effectiveness of our proposed beamforming and channel estimation methods.

eess.SY

Beamforming Towards Seamless Sensing Coverage for Cellular Integrated Sensing and Communication

The sixth generation (6G) mobile communication networks are expected to offer a new paradigm of cellular integrated sensing and communication (ISAC). However, due to the intrinsic difference between sensing and communication in terms of coverage requirement, current cellular networks that are deliberately planned mainly for communication coverage are difficult to achieve seamless sensing coverage. To address this issue, this paper studies the beamforming optimization towards seamless sensing coverage for a basic bi-static ISAC system, while ensuring that the communication requirements of multiple users equipment (UEs) are satisfied. Towards this end, an optimization problem is formulated to maximize the worst-case sensing signal-to-noise ratio (SNR) in a prescribed coverage region, subject to the signal-to-interference-plus-noise ratio (SINR) requirement for each UE. To gain some insights, we first investigate the special case with one single UE and one single sensing point, for which a closed-from expression of the optimal beamforming is obtained. For the general case with multiple communication UEs and contiguous regional sensing coverage, an efficient algorithm based on successive convex approximation (SCA) is proposed to solve the non-convex beamforming optimization problem. Numerical results demonstrate that the proposed design is able to achieve seamless sensing coverage in the prescribed region, while guaranteeing the communication requirements of the UEs.

cs.IT

Cell-Free Symbiotic Radio: Channel Estimation Method and Achievable Rate Analysis

Cell-free massive MIMO and symbiotic radio are promising beyond 5G (B5G) networking architecture and transmission technology, respectively. This paper studies cell-free symbiotic radio systems, where a number of distributed access points (APs) cooperatively send primary information to a receiver, and simultaneously support the backscattering communication of the secondary backscatter device (BD). An efficient two-phase uplink-training based channel estimation method is proposed to estimate the direct-link channel and cascaded backscatter channel, and the achievable primary and secondary communication rates taking into account the channel estimation errors are derived. Furthermore, to achieve a flexible trade-off between the primary and secondary communication rates, we propose a low-complexity weighted-maximal-ratio transmission (weighted-MRT) beamforming scheme, which only requires local processing at each AP without having to exchange the estimated channel state information. Simulation results are provided to show the impact of the channel training lengths on the performance of the cell-free symbiotic radio systems.

cs.IT