arXiv subjects

Ruoxiao Cao

Publications and source records attributed to Ruoxiao Cao.

4 recordsLinked to original sources

arXiv2026

Low-Complexity Gridless Single-Snapshot DoA Estimation via Truncated Hankel Newton-MUSIC

Reconfigurable antenna arrays can provide enhanced spatial Degrees of Freedom (DoFs) for Integrated Sensing And Communication (ISAC) systems, enabling high-resolution Direction of Arrival (DoA) estimation. In highly dynamic scenarios, however, DoA estimation must be performed within short coherence intervals, which often restricts processing to a single snapshot. Conventional subspace methods then suffer from rank deficiency, while Hankel-based spatial smoothing incurs high computational cost when the array size is large. This paper proposes a low-complexity gridless Truncated Hankel NewtonMUSIC framework for single-snapshot DoA estimation. The proposed method constructs a truncated Hankel matrix with a fixed row dimension to recover an effective signal subspace while reducing the cost of correlation construction and subspace decomposition. When the truncation length is independent of the array size, the dominant complexity scales linearly with the number of antenna ports. To reduce grid-induced quantization errors, coarse grid estimates are further refined by a secondorder Newton update in the continuous angular domain. Simulation results show that the proposed method achieves DoA estimation accuracy close to square Hankel Newton-MUSIC while substantially reducing runtime. For large arrays, it provides more than two orders of magnitude runtime reduction compared with conventional square Hankel MUSIC, making it suitable for realtime sensing in reconfigurable antenna-enabled ISAC systems.

eess.SP↗

arXiv2026

Sensing-Assisted Channel Estimation for Flexible-Antenna Systems: A Unified Framework

Flexible-antenna systems, which use a small number of radio frequency (RF) chains to dynamically access a large set of candidate antenna locations, have emerged as a hardware-efficient architecture for 6G networks. Acquiring accurate channel state information (CSI) is critical for these systems, but it typically incurs a prohibitive pilot overhead that scales with the massive number of candidate locations. To address this bottleneck, we propose a unified sensing-assisted channel estimation framework tailored for flexible-antenna systems. It reduces the full CSI reconstruction problem to a consistent two-stage process: it first resolves the dominant DOAs from the uplink data symbols by exploiting the spatial geometry, requiring no dedicated sensing pilot, and then calibrates the associated path gains using a minimal number of calibration pilots. Building on this pipeline, we develop two Newton-MUSIC algorithms tailored to different propagation environments. For line-of-sight (LOS)-dominant environments with uncorrelated sources, we propose SOC-Newton-MUSIC, which leverages second-order covariance (SOC) for low-complexity DOA sensing. For non-line-of-sight (NLOS) environments with coherent multipath, where the number of sources may exceed the number of activated RF chains, we propose FOC-Newton-MUSIC, which exploits fourth-order cumulants (FOC) to restore source identifiability and structurally expand the available spatial degrees of freedom (DOFs) through a continuous difference co-array. In both cases, by reformulating the spatial spectrum search as a continuous optimization problem, we replace exhaustive dense grid searches with parallelized Newton refinements.

eess.SP↗

arXiv2023

Joint Channel Estimation and Cooperative Localization for Near-Field Ultra-Massive MIMO

The next-generation wireless networks are envisioned to jointly support high-rate communications and ubiquitous sensing. Ultra-Massive Multiple-Input Multiple-Output (UM-MIMO) offers abundant spatial Degrees of Freedom (DoFs) for both functions, yet its large aperture shifts electromagnetic propagation into the near field, invalidating conventional far-field (plane-wave) assumptions. While near-field channel modeling has been studied, existing channel estimation methods are inadequate: on-grid designs suffer from non-orthogonal codebooks, and off-grid methods lack convergence guarantees, yielding unreliable estimates. Moreover, channel estimation and localization are typically designed in isolation, preventing the exchange of information that could otherwise enable mutual performance improvement. To address this difficulty, we propose a unified framework that exploits near-field characteristics to jointly design channel estimation and cooperative localization. Specifically, we develop a Variational Newtonized Near-field Channel Estimation (VNNCE) algorithm that extracts position-aware soft information from the channel, and a Gaussian Fusion Cooperative Localization (GFCL) method that leverages this information across multiple Base Stations (BSs) for enhanced accuracy.

eess.SP↗

arXiv2023

Multi-Channel Attentive Feature Fusion for Radio Frequency Fingerprinting

Radio frequency fingerprinting (RFF) is a promising device authentication technique for securing the Internet of things. It exploits the intrinsic and unique hardware impairments of the transmitters for RF device identification. In real-world communication systems, hardware impairments across transmitters are subtle, which are difficult to model explicitly. Recently, due to the superior performance of deep learning (DL)-based classification models on real-world datasets, DL networks have been explored for RFF. Most existing DL-based RFF models use a single representation of radio signals as the input. Multi-channel input model can leverage information from different representations of radio signals and improve the identification accuracy of the RF fingerprint. In this work, we propose a novel multi-channel attentive feature fusion (McAFF) method for RFF. It utilizes multi-channel neural features extracted from multiple representations of radio signals, including IQ samples, carrier frequency offset, fast Fourier transform coefficients and short-time Fourier transform coefficients, for better RF fingerprint identification. The features extracted from different channels are fused adaptively using a shared attention module, where the weights of neural features from multiple channels are learned during training the McAFF model. In addition, we design a signal identification module using a convolution-based ResNeXt block to map the fused features to device identities. To evaluate the identification performance of the proposed method, we construct a WiFi dataset, named WFDI, using commercial WiFi end-devices as the transmitters and a Universal Software Radio Peripheral (USRP) as the receiver. ...

eess.SP↗