arXiv subjects

Ruslan Belikov

Publications and source records attributed to Ruslan Belikov.

At least 37 records · Page 2Linked to original sources

arXiv2022

Nancy Grace Roman Space Telescope Coronagraph Instrument Observation Calibration Plan

NASA's next flagship mission, the Nancy Grace Roman Space Telescope, is a 2.4-meter observatory set to launch no later than May 2027. Roman features two instruments: the Wide Field Imager and the Coronagraph Instrument. Roman's Coronagraph is a Technology Demonstration that will push the current capabilities of direct imaging to smaller contrast ratios ($\sim$10$^{-9}$) and inner-working angles (3~$λ$/D). In order to achieve this high precision, Roman Coronagraph data must be calibrated to remove as many potential sources of error as possible. Here we present a detailed overview of the Nancy Grace Roman Space Telescope Coronagraph Instrument Observation Calibration Plan including identifying potential sources of error and how they will be mitigated via on-sky calibrations.

astro-ph.IM↗

arXiv2022

Flatfield Calibrations with Astrophysical Sources for the Nancy Grace Roman Space Telescope's Coronagraph Instrument

The Nancy Grace Roman Space Telescope Coronagraph Instrument is a high-contrast imager, polarimeter, and spectrometer that will enable the study of exoplanets and circumstellar disks at visible wavelengths ($\sim$550--850~nm) at contrasts 2--3 orders of magnitude better than can currently be achieved by ground or space-based direct imaging facilities. To capitalize on this sensitivity, precise flux calibration will be required. The Roman Coronagraph, like other space-based missions, will use on-orbit flatfields to measure and correct for phenomena that impact the measured total effective throughput. However, the Coronagraph does not have internal lamp sources, therefore we have developed a method to perform flatfield calibrations using observations of extended sources, such as Uranus and Neptune, using a combination of rastering the Coronagraph's Fast Steering Mirror, tiling the planet across the field of view, and matched-filter image processing. Here we outline the process and present the results of simulations using images of Uranus and Neptune from the Hubble Space Telescopes Wide Field Camera 3, in filters approximate to the Coronagraph's Band 1 and Band 4. The simulations are performed over the Coronagraph's direct imaging and polarimetric modes. We model throughput effects in 3 different spatial frequency regimes including 1) high spatial frequency detector pixel-to-pixel quantum efficiency variations, 2) medium spatial frequency "measles" caused by particle deposition on the detector or other focal-plane optics post-launch, and 3) low spatial frequency detector fringing caused by self-interference due to internal reflections in the detector substrate as well as low spatial frequency vignetting at the edges of the Coronagraph's field of view. We show that Uranus and Neptune can be used as astrophysical flat sources with high precision ($\sim$0.5% relative error)

astro-ph.IM↗

arXiv2021

High contrast imaging at the photon noise limit with self-calibrating WFS/C systems

High contrast imaging (HCI) systems rely on active wavefront control (WFC) to deliver deep raw contrast in the focal plane, and on calibration techniques to further enhance contrast by identifying planet light within the residual speckle halo. Both functions can be combined in an HCI system and we discuss a path toward designing HCI systems capable of calibrating residual starlight at the fundamental contrast limit imposed by photon noise. We highlight the value of deploying multiple high-efficiency wavefront sensors (WFSs) covering a wide spectral range and spanning multiple optical locations. We show how their combined information can be leveraged to simultaneously improve WFS sensitivity and residual starlight calibration, ideally making it impossible for an image plane speckle to hide from WFS telemetry. We demonstrate residual starlight calibration in the laboratory and on-sky, using both a coronagraphic setup, and a nulling spectro-interferometer. In both case, we show that bright starlight can calibrate residual starlight.

astro-ph.IM↗

arXiv2021

SCExAO, a testbed for developing high-contrast imaging technologies for ELTs

To directly detect exoplanets and protoplanetary disks, the development of high accuracy wavefront sensing and control (WFS&C) technologies is essential, especially for ground-based Extremely Large Telescopes (ELTs). The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a high-contrast imaging platform to discover and characterize exoplanets and protoplanetary disks. It also serves as a testbed to validate and deploy new concepts or algorithms for high-contrast imaging approaches for ELTs, using the latest hardware and software technologies on an 8-meter class telescope. SCExAO is a multi-band instrument, using light from 600 to 2500 nm, and delivering a high Strehl ratio (>80% in median seeing in H-band) downstream of a low-order correction provided by the facility AO188. Science observations are performed with coronagraphs, an integral field spectrograph, or single aperture interferometers. The SCExAO project continuously reaches out to the community for development and upgrades. Existing operating testbeds such as the SCExAO are also unique opportunities to test and deploy the new technologies for future ELTs. We present and show a live demonstration of the SCExAO capabilities (Real-time predictive AO control, Focal plane WFS&C, etc) as a host testbed for the remote collaborators to test and deploy the new WFS&C concepts or algorithms. We also present several high-contrast imaging technologies that are under development or that have already been demonstrated on-sky.

astro-ph.IM↗

arXiv2021

Flight mask designs of the Roman Space Telescope Coronagraph Instrument

Over the past two decades, thousands of confirmed exoplanets have been detected; the next major challenge is to characterize these other worlds and their stellar systems. Much information on the composition and formation of exoplanets and circumstellar debris disks can only be achieved via direct imaging. Direct imaging is challenging because of the small angular separations ($<1$ arcsec) and high star-to-planet flux ratios (${\sim}10^{9}$ for a Jupiter analog or ${\sim}10^{10}$ for an Earth analog in the visible). Atmospheric turbulence prohibits reaching such high flux ratios on the ground, so observations must be made above the Earth's atmosphere. The Nancy Grace Roman Space Telescope (Roman), set to launch in the mid-2020s, will be the first space-based observatory to demonstrate high-contrast imaging with active wavefront control using its Coronagraph Instrument. The instrument's main purpose is to mature the various technologies needed for a future flagship mission to image and characterize Earth-like exoplanets. These technologies include two high-actuator-count deformable mirrors, photon-counting detectors, two complementary wavefront sensing and control loops, and two different coronagraph types. In this paper, we describe the complete set of flight coronagraph mask designs and their intended combinations in the Roman Coronagraph Instrument. There are three types of mask configurations included: a primary one designed to meet the instrument's top-level requirement, three that are supported on a best-effort basis, and several unsupported ones contributed by the NASA Exoplanet Exploration Program. The unsupported mask configurations could be commissioned and used if the instrument is approved for operations after its initial technology demonstration phase.

astro-ph.IM↗

arXiv2021

The Mysterious Lives Of Speckles. I. Residual atmospheric speckle lifetimes in ground-based coronagraphs

High-contrast imaging observations are fundamentally limited by the spatially and temporally correlated noise source called speckles. Suppression of speckle noise is the key goal of wavefront control and adaptive optics (AO), coronagraphy, and a host of post-processing techniques. Speckles average at a rate set by the statistical speckle lifetime, and speckle-limited integration time in long exposures is directly proportional to this lifetime. As progress continues in post-coronagraph wavefront control, residual atmospheric speckles will become the limiting noise source in high-contrast imaging, so a complete understanding of their statistical behavior is crucial to optimizing high-contrast imaging instruments. Here we present a novel power spectral density (PSD) method for calculating the lifetime, and develop a semi-analytic method for predicting intensity PSDs behind a coronagraph. Considering a frozen-flow turbulence model, we analyze the residual atmosphere speckle lifetimes in a MagAO-X-like AO system as well as 25--39 m giant segmented mirror telescope (GSMT) scale systems. We find that standard AO control shortens atmospheric speckle lifetime from ~130 ms to ~50 ms, and predictive control will further shorten the lifetime to ~20 ms on 6.5 m MagAO-X. We find that speckle lifetimes vary with diameter, wind speed, seeing, and location within the AO control region. On bright stars lifetimes remain within a rough range of ~20 ms to ~100 ms. Due to control system dynamics there are no simple scaling laws which apply across a wide range of system characteristics. Finally, we use these results to argue that telemetry-based post-processing should enable ground-based telescopes to achieve the photon-noise limit in high-contrast imaging.

astro-ph.IM↗

arXiv2020

A review of simulation and performance modeling for the Roman coronagraph instrument

The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) will be capable of characterizing exoplanets in reflected light and will demonstrate space technologies essential for future missions to take spectra of Earthlike exoplanets. As the mission and instrument move into the final stages of design, simulation tools spanning from depth of search calculators to detailed diffraction models have been created by a variety of teams. We summarize these efforts, with a particular focus on publicly available datasets and software tools. These include speckle and point-spread-function models, signal-to-noise calculators, and science product simulations (e.g. predicted observations of debris disks and exoplanet spectra). This review is intended to serve as a reference to facilitate engagement with the technical and science capabilities of the CGI instrument.

astro-ph.EP↗

arXiv2020

Sensitivity Analyses of Exoplanet Occurrence Rates from Kepler and Gaia

We infer the number of planets-per-star as a function of orbital period and planet size using $Kepler$ archival data products with updated stellar properties from the $Gaia$ Data Release 2. Using hierarchical Bayesian modeling and Hamiltonian Monte Carlo, we incorporate planet radius uncertainties into an inhomogeneous Poisson point process model. We demonstrate that this model captures the general features of the outcome of the planet formation and evolution around GK stars, and provides an infrastructure to use the $Kepler$ results to constrain analytic planet distribution models. We report an increased mean and variance in the marginal posterior distributions for the number of planets per $GK$ star when including planet radius measurement uncertainties. We estimate the number of planets-per-$GK$ star between 0.75 and 2.5 $R_{\oplus}$ and 50 to 300 day orbital periods to have a $68\%$ credible interval of $0.49$ to $0.77$ and a posterior mean of $0.63$. This posterior has a smaller mean and a larger variance than the occurrence rate calculated in this work and in Burke et al. (2015) for the same parameter space using the $Q1-Q16$ (previous $Kepler$ planet candidate and stellar catalog). We attribute the smaller mean to many of the instrumental false positives at longer orbital periods being removed from the $DR25$ catalog. We find that the accuracy and precision of our hierarchical Bayesian model posterior distributions are less sensitive to the total number of planets in the sample, and more so on the characteristics of the catalog completeness and reliability and the span of the planet parameter space.

astro-ph.EP↗

arXiv2020

Laboratory Demonstration of Spatial Linear Dark Field Control For Imaging Extrasolar Planets in Reflected Light

Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts ($\sim$ 5$\times$10$^{-7}$) and separations (1.5--5.2 $λ$/D) needed to image jovian planets around Sun-like stars with space-borne coronagraphs like WFIRST-CGI and image exo-Earths around low-mass stars with future ground-based 30m class telescopes. In four separate experiments and for a range of different perturbations, LDFC largely restores (to within a factor of 1.2--1.7) and maintains a dark hole whose contrast is degraded by phase errors by an order of magnitude. Our implementation of classical speckle nulling requires a factor of 2--5 more iterations and 20--50 DM commands to reach contrasts obtained by spatial LDFC. Our results provide a promising path forward to maintaining dark holes without relying on DM probing and in the low-flux regime, which may improve the duty cycle of high-contrast imaging instruments, increase the temporal correlation of speckles, and thus enhance our ability to image true solar system analogues in the next two decades.

astro-ph.IM↗

arXiv2020

Detecting Exoplanets Using Eclipsing Binaries as Natural Starshades

We investigate directly imaging exoplanets around eclipsing binaries, using the eclipse as a natural tool for dimming the binary and thus increasing the planet to star brightness contrast. At eclipse, the binary becomes point-like, making coronagraphy possible. We select binaries where the planet-star contrast would be boosted by $>10\times$ during eclipse, making it possible to detect a planet that is $\gtrsim10\times$ fainter or in a star system that is $\sim2$-$3\times$ more massive than otherwise. Our approach will yield insights into planet occurrence rates around binaries versus individual stars. We consider both self-luminous (SL) and reflected light (RL) planets. In the SL case, we select binaries whose age is young enough so that an orbiting SL planet would remain luminous; in U Cep and AC Sct, respectively, our method is sensitive to SL planets of $\sim$4.5$M_J$ and $\sim$9$M_J$ with current ground- or near-future space-based instruments, and $\sim$1.5$M_J$ and $\sim$6$M_J$ with future ground-based observatories. In the RL case, there are three nearby ($\lesssim50$ pc) systems -- V1412 Aql, RR Cae, RT Pic -- around which a Jupiter-like planet at a planet-star separation of $\gtrsim20$ mas might be imaged with future ground- and space-based coronagraphs. A Venus-like planet at the same distance might be detectable around RR Cae and RT Pic. A habitable Earth-like planet represents a challenge; while the planet-star contrast at eclipse and planet flux are accessible with a 6-8m space telescope, the planet-star separation is 1/3 - 1/4 of the angular separation limit of modern coronagraphy.

astro-ph.EP↗

arXiv2019

Searching for Planets Orbiting Alpha Centauri A with the James Webb Space Telescope

Alpha Centauri A is the closest solar-type star to the Sun and offers an excellent opportunity to detect the thermal emission of a mature planet heated by its host star. The MIRI coronagraph on JWST can search the 1-3 AU (1"-2") region around alpha Cen A which is predicted to be stable within the alpha Cen AB system. We demonstrate that with reasonable performance of the telescope and instrument, a 20 hr program combining on-target and reference star observations at 15.5 um could detect thermal emission from planets as small as ~5 RE. Multiple visits every 3-6 months would increase the geometrical completeness, provide astrometric confirmation of detected sources, and push the radius limit down to ~3 RE. An exozodiacal cloud only a few times brighter than our own should also be detectable, although a sufficiently bright cloud might obscure any planet present in the system. While current precision radial velocity (PRV) observations set a limit of 50-100 ME at 1-3 AU for planets orbiting alpha Cen A, there is a broad range of exoplanet radii up to 10 RE consistent with these mass limits. A carefully planned observing sequence along with state-of-the-art post-processing analysis could reject the light from alpha Cen A at the level of ~10^-5 at 1"-2" and minimize the influence of alpha Cen B located 7-8" away in the 2022-2023 timeframe. These space-based observations would complement on-going imaging experiments at shorter wavelengths as well as PRV and astrometric experiments to detect planets dynamically. Planetary demographics suggest that the likelihood of directly imaging a planet whose mass and orbit are consistent with present PRV limits is small, ~5%, and possibly lower if the presence of a binary companion further reduces occurrence rates. However, at a distance of just 1.34 pc, alpha Cen A is our closest sibling star and certainly merits close scrutiny.

astro-ph.IM↗

arXiv2019

Developing Linear Dark-Field Control for Exoplanet Direct Imaging in the Laboratory and on Ground-based Telescopes

Imaging rocky planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo at just several diffraction beam widths. We discuss development of Linear Dark Field Control (LDFC) to achieve this aim. We describe efforts to test spatial LDFC in a laboratory setting for the first time, using the Ames Coronagraph Experiment (ACE) testbed. Our preliminary results indicate that spatial LDFC is a promising method focal-plane wavefront control method capable of maintaining a static dark hole, at least at contrasts relevant for imaging mature planets with 30m-class telescopes.

astro-ph.IM↗

arXiv2019

High-Contrast Testbeds for Future Space-Based Direct Imaging Exoplanet Missions

Instrumentation techniques in the field of direct imaging of exoplanets have greatly advanced over the last two decades. Two of the four NASA-commissioned large concept studies involve a high-contrast instrument for the imaging and spectral characterization of exo-Earths from space: LUVOIR and HabEx. This whitepaper describes the status of 8 optical testbeds in the US and France currently in operation to experimentally validate the necessary technologies to image exo-Earths from space. They explore two complementary axes of research: (i) coronagraph designs and manufacturing and (ii) active wavefront correction methods and technologies. Several instrument architectures are currently being analyzed in parallel to provide more degrees of freedom for designing the future coronagraphic instruments. The necessary level of performance has already been demonstrated in-laboratory for clear off-axis telescopes (HabEx-like) and important efforts are currently in development to reproduce this accomplishment on segmented and/or on-axis telescopes (LUVOIR-like) over the next two years.

astro-ph.IM↗

arXiv2019

The Critical, Strategic Importance of Adaptive Optics-Assisted Ground-Based Telescopes for the Success of Future NASA Exoplanet Direct Imaging Missions

Ground-based telescopes coupled with adaptive optics (AO) have been playing a leading role in exoplanet direct imaging science and technological development for the past two decades and will continue to have an indispensable role for the next decade and beyond. Over the next decade, extreme AO systems on 8-10m telescopes will 1) mitigate risk for WFIRST-CGI by identifying numerous planets the mission can spectrally characterize, 2) validate performance requirements and motivate improvements to atmosphere models needed to unambiguously characterize solar system-analogues from space, and 3) mature novel technological innovations useful for space. Extremely Large Telescopes can deliver the first thermal infrared (10 $μm$) images of rocky planets around Sun-like stars and identify biomarkers. These data provide a future NASA direct imaging flagship mission (i.e. HabEx, LUVOIR) with numerous exo-Earth candidates and critical ancillary information to help clarify whether these planets are habitable.

astro-ph.EP↗

arXiv2018

Wavefront retrieval through random pupil plane phase probes: Gerchberg-Saxton approach

A pupil plane wavefront reconstruction procedure is proposed based on analysis of a sequence of focal plane images corresponding to a sequence of random pupil plane phase probes. The developed method provides the unique nontrivial solution of wavefront retrieval problem and shows global convergence to this solution demonstrated using a Gerchberg-Saxton implementation. The method is general and can be used in any optical system that includes deformable mirrors for active/adaptive wavefront correction. The presented numerical simulation and lab experimental results show low noise sensitivity, high reliability and robustness of the proposed approach for high quality optical wavefront restoration. Laboratory experiments have shown $λ$/14 rms accuracy in retrieval of a poked DM actuator fiducial pattern with spatial resolution of 20-30$~μ$m that is comparable with accuracy of direct high-resolution interferometric measurements.

astro-ph.IM↗

arXiv2018

Exoplanet Terra Incognita

Exoplanet surface imaging, cartography and the search for exolife are the next frontiers of planetology and astrophysics. Here we present an over-view of ideas and techniques to resolve albedo features on exoplanetary surfaces. Albedo maps obtained in various spectral bands (similar to true-colour images) may reveal exoplanet terrains, geological history, life colonies, and even artificial structures of advanced civilizations.

astro-ph.IM↗

arXiv2018

TDEM final report: Enhanced direct imaging exoplanet detection with astrometry mass determination

This Final Report (FR) presents the results of the Enhanced direct imaging exoplanet detection with astrometry mass determination project, which was executed in support of NASA's Exoplanet Exploration Program and the ROSES Technology Development for Exoplanet Missions (TDEM). The first milestone is concerned with a demonstration of medium fidelity astrometry accuracy and the second milestone demonstrates high-contrast imaging utilizing the same astrometry-capable optics. We have met milestone #1 with a comfortable margin. The average accuracy obtained over the three datasets is 5.75e-5 L/D, which is 4 times better than the milestone requirement, or equivalent to 2.5microarcsec on 2.4m telescope, or 1.5microarcsec for a 4m telescope, working in the visible band. These results show the potential of this technique to enable detection and measure masses of Earth-like planets around nearby stars, hence bringing a real benefit to the astronomy community. We also met milestone #2 and demonstrated that it is possible to achieve high-contrast imaging utilizing a coronagraph fed by a telescope equipped with a DP, enabling dual use of the telescope. We performed three different high-contrast imaging runs and met the milestone #2 of 5e-7 raw contrast for all of them. On average, we obtained 3.33e-7 raw contrast considering all data sets. This result is 35% better than the milestone #2 requirement. We validated the stability of the high-contrast region by averaging frames and subtracting the average from single frames, which resulted in contrast improvement of approximately one order of magnitude, reaching 2.72e-8 contrast. The main achievement of this work was the medium fidelity demonstration and feasibility validation of performing astrometry and direct imaging using the same instrument, significantly enhancing the expected scientific yield of dedicated exoplanet characterization missions.

astro-ph.IM↗

arXiv2018

Using Ground-Based Telescopes to Mature Key Technologies and Advance Science for Future NASA Exoplanet Direct Imaging Missions

Ground-based telescopes have been playing a leading role in exoplanet direct imaging science and technological development for the past two decades and will continue to have an indispensable role for the next decade and beyond. Extreme adaptive optics (AO) systems will advance focal-plane wavefront control and coronagraphy, augmenting the performance of and mitigating risk for WFIRST-CGI, while validating performance requirements and motivating improvements to atmosphere models needed to unambiguously characterize solar system-analogues with HabEx/LUVOIR. Specialized instruments for Extremely Large Telescopes may deliver the first thermal infrared images of rocky planets around Sun-like stars, providing HabEx/LUVOIR with numerous exo-Earth candidates and key ancillary information that can help clarify whether the planets are habitable.

astro-ph.IM↗