arXiv subjects

Ruslan Temirov

Publications and source records attributed to Ruslan Temirov.

17 recordsLinked to original sources

arXiv2026

A miniature evaporator for in-operando deposition of isolated atoms in a low-temperature scanning tunneling microscope

Depositing dilute atomic ensembles onto cold samples is challenging in low-temperature scanning tunneling microscopes (STM) because radiation shields and restricted internal geometries often preclude a direct deposition path, particularly in instruments designed for millikelvin operation. We present a compact, milliwatt-range evaporation source fabricated from a commercial miniature incandescent lamp and integrated directly into a millikelvin STM head. The exposed tungsten filament is coated with a micrometre-thick Fe film and positioned about 1 cm from the sample. We deposit isolated Fe atoms onto MgO/Ag(100) while operating the microscope near 5 K. Evaporation increases the STM-body temperature by only about 2 K, and the same nanoscopic surface region can be readily scanned after deposition with a lateral displacement of less than 5 nm. Differential-conductance spectra displaying symmetric inelastic steps near $\pm$14 mV identify the deposited atoms on MgO as Fe. From STM images, we estimate a local deposition flux of $1.5\times10^{-5}~\mathrm{nm^{-2}\,s^{-1}}$, corresponding to a nominal evaporator lifetime of ~150 h. The fixed evaporator enables repeated low-flux deposition without a room-temperature line of sight, the need for movable radiation shields, or mechanical evaporator access after cooldown, while preserving access to the same atomic-scale surface region before and after deposition.

cond-mat.mes-hall↗

arXiv2026

Orbitals of Artificial Atoms in a Gapped Two-Dimensional Vacuum

Advances in nanotechnology now allow the creation of artificial atoms - engineered structures whose electronic states closely mimic those of real atoms. Understanding how these artificial atoms interact and bond is key to designing new materials with tailored electronic properties. Here, we use scanning tunnelling microscopy to visualise the bound states of nanostructures patterned in a two-dimensional molecular film featuring a parabolic band with multiple partial energy gaps. The lowest-energy states split off from the bottom of the band and resemble the familiar $s$ and $p$ orbitals of natural atoms, even bonding in the same way. Yet, artificial atoms go beyond this analogy: the gapped two-dimensional vacuum in which they reside gives rise to entirely new orbitals with no counterparts in real atoms. These quasi-one-dimensional localised states enrich the orbital vocabulary of chemistry, adding a new class of orbitals that are predominantly shaped by the surrounding electronic vacuum.

cond-mat.mes-hall↗

arXiv2025

Bond-resolved STM with density-based methods

Bond-resolved STM (BRSTM) is a recent technique that combines the advantages of scanning tunneling microscopy (STM) with the outstanding intramolecular resolution provided by non-contact atomic force microscopy (ncAFM) using a CO-functionalized tips, offering unique insights into molecular interactions at surfaces. In this work, we present a novel and easily implementable approach for simulating BRSTM images, which we have applied to reproduce new experimental BRSTM data of Perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) on Ag(111), obtained with unprecedented control of tip-sample separation ($\sim$10~pm). Our method integrates the Full-Density-Based Model (FDBM) developed for High-Resolution Atomic Force Microscopy (HRAFM) with Chen's derivative approximation for tunneling channels, effectively capturing the contributions of both $\sigma$ and $\pi$ channels, while accounting for the CO-tip deflection induced by probe-sample interactions. This approach accurately reproduces the experimental results for both PTCDA/Ag(111) and 1,5,9-trioxo-13-azatriangulene (TOAT)/Cu(111) systems, including intricate tip-sample distance-dependent features. Furthermore, we also demonstrate the important role of substrate-induced effects, which can modify molecular orbital occupation and the relaxation of the CO probe, resulting in distinct BRSTM image characteristics.

cond-mat.mtrl-sci↗

arXiv2023

The electrostatic potential of atomic nanostructures on a metal surface

The discrete and charge-separated nature of matter - electrons and nuclei - results in local electrostatic fields that are ubiquitous in nanoscale structures and are determined by their shape, material, and environment. Such fields are relevant in catalysis, nanoelectronics and quantum nanoscience, and their control will become even more important as the devices in question reach few-nanometres dimensions. Surface-averaging techniques provide only limited experimental access to these potentials at and around individual nanostructures. Here, we use scanning quantum dot microscopy to investigate how electric potentials evolve as nanostructures are built up atom by atom. We image the potential over adatoms, chains, and clusters of Ag and Au atoms on Ag(111) and quantify their surface dipole moments. By focusing on the total charge density, these data establish a new benchmark for ab initio calculations. Indeed, our density functional theory calculations not only show an impressive agreement with experiment, but also allow a deeper analysis of the mechanisms behind the dipole formation, their dependence on fundamental atomic properties and on the atomic configuration of the nanostructures. This allows us to formulate an intuitive picture of the basic mechanisms behind dipole formation, which enables better design choices for future nanoscale systems such as single atom catalysts.

cond-mat.mtrl-sci↗

arXiv2023

Electron spin secluded inside a bottom-up assembled standing metal-molecule nanostructure

Artificial nanostructures, fabricated by placing building blocks such as atoms or molecules in well-defined positions, are a powerful platform in which quantum effects can be studied and exploited on the atomic scale. Here, we report a strategy to significantly reduce the electron-electron coupling between a large planar aromatic molecule and the underlying metallic substrate. To this end, we use the manipulation capabilities of a scanning tunneling microscope (STM) and lift the molecule into a metastable upright geometry on a pedestal of two metal atoms. Measurements at millikelvin temperatures and magnetic fields reveal that the bottom-up assembled standing metal-molecule nanostructure has an $S = \frac{1}{2}$ spin which is screened by the substrate electrons, resulting in a Kondo temperature of only $291 \pm 13$ mK. We extract the Land\'e $g$-factor of the molecule and the exchange coupling $J\rho$ to the substrate by modeling the differential conductance spectra using a third-order perturbation theory in the weak coupling and high-field regimes. Furthermore, we show that the interaction between the STM tip and the molecule can tune the exchange coupling to the substrate, which suggests that the bond between the standing metal-molecule nanostructure and the surface is mechanically soft.

cond-mat.mes-hall↗

arXiv2022

How cold is the junction of a millikelvin scanning tunnelling microscope?

We employ a scanning tunnelling microscope (STM) cooled to millikelvin temperatures by an adiabatic demagnetization refrigerator (ADR) to perform scanning tunnelling spectroscopy (STS) on an atomically clean surface of Al(100) in a superconducting state using normal-metal and superconducting STM tips. Varying the ADR temperatures between 30 mK and 1.2 K, we show that the temperature of the STM junction $T$ is decoupled from the temperature of the surrounding environment $T_{\mathrm{env}}$. Simulating the STS data with the $P(E)$ theory, we determine that $T_{\mathrm{env}} \approx 1.5$ K, while the fitting of the superconducting gap spectrum yields the lowest $T=77$ mK.

cond-mat.mes-hall↗

arXiv2022

Portrait of locally driven quantum phase transition cascades in a molecular monolayer

Strongly interacting electrons in layered materials give rise to a plethora of emergent phenomena, such as unconventional superconductivity. heavy fermions, and spin textures with non-trivial topology. Similar effects can also be observed in bulk materials, but the advantage of two dimensional (2D) systems is the combination of local accessibility by microscopic techniques and tuneability. In stacks of 2D materials, for example, the twist angle can be employed to tune their properties. However, while material choice and twist angle are global parameters, the full complexity and potential of such correlated 2D electronic lattices will only reveal itself when tuning their parameters becomes possible on the level of individual lattice sites. Here, we discover a lattice of strongly correlated electrons in a perfectly ordered 2D supramolecular network by driving this system through a cascade of quantum phase transitions using a movable atomically sharp electrostatic gate. As the gate field is increased, the molecular building blocks change from a Kondo-screened to a paramagnetic phase one-by-one, enabling us to reconstruct their complex interactions in detail. We anticipate that the supramolecular nature of the system will in future allow to engineer quantum correlations in arbitrary patterned structures.

cond-mat.mes-hall↗

arXiv2021

Disentangling the Complex Electronic Structure of an Adsorbed Nanographene: Cycloarene C108

We combine low-temperature scanning tunneling spectroscopy, CO functionalized tips and algorithmic data analysis to investigate the electronic structure of the molecular cycloarene C108 (graphene nanoring) adsorbed on a Au(111) surface. We demonstrate that CO functionalized tips enhance the visibility of molecular resonances, both in differential conductance spectra and in real-space topographic images without introducing spurious artifacts. Comparing our experimental data with ab-initio density functional theory reveals a remarkably precise agreement of the molecular orbitals and enables us to disentangle close-lying molecular states only separated by 50 meV at an energy of 2 eV below the Fermi level. We propose this combination of techniques as a promising new route for a precise characterization of complex molecules and other physical entities which have electronic resonances in the tip-sample junction.

cond-mat.mes-hall↗

arXiv2021

Resolving Ambiguity of the Kondo Temperature Determination in Mechanically Tunable Single-Molecule Kondo Systems

Determination of the molecular Kondo temperature $T_K$ poses a challenge in most cases when the experimental temperature cannot be tuned to a sufficient extent. We show how this ambiguity can be resolved if additional control parameters are present, such as magnetic field and mechanical gating. We record the evolution of the differential conductance by lifting an individual molecule from the metal surface with the tip of a scanning tunneling microscope. By fitting the measured conductance spectra with the single impurity Anderson model we are able to demonstrate that the lifting tunes the junction continuously from the strongly correlated Kondo-singlet to the free spin $1/2$ ground state. In the crossover regime, where $T_K$ is similar to the temperature of experiment, the fitting yields ambiguous estimates of $T_K$ varying by an order of magnitude. We show that analysis of the conductance measured in two distinct external magnetic fields can be used to resolve this problem.

cond-mat.mes-hall↗

arXiv2021

A millikelvin scanning tunneling microscope in ultra-high vacuum with adiabatic demagnetization refrigeration

We present the design and performance of an ultra-high vacuum (UHV) scanning tunneling microscope (STM) that uses adiabatic demagnetization of electron magnetic moments for controlling its operating temperature in the range between 30 mK and 1 K with the accuracy of up to 7 $\mu$K. The time available for STM experiments at 50 mK is longer than 20 h, at 100 mK about 40 h. The single-shot adiabatic demagnetization refrigerator (ADR) can be regenerated automatically within 7 hours while keeping the STM temperature below 5 K. The whole setup is located in a vibrationally isolated, electromagnetically shielded laboratory with no mechanical pumping lines penetrating through its isolation walls. The 1K pot of the ADR cryostat can be operated silently for more than 20 days in a single-shot mode using a custom-built high-capacity cryopump. A high degree of vibrational decoupling together with the use of a specially-designed minimalistic STM head provides an outstanding mechanical stability, demonstrated by the tunneling current noise, STM imaging, and scanning tunneling spectroscopy measurements all performed on atomically clean Al(100) surface.

physics.ins-det↗

arXiv2021

Control of Scanning Quantum Dot Microscopy

Scanning quantum dot microscopy is a recently developed high-resolution microscopy technique that is based on atomic force microscopy and is capable of imaging the electrostatic potential of nanostructures like molecules or single atoms. Recently, it could be shown that it not only yields qualitatively but also quantitatively cutting edge images even on an atomic level. In this paper we present how control is a key enabling element to this. The developed control approach consists of a two-degree-of-freedom control framework that comprises a feedforward and a feedback part. For the latter we design two tailored feedback controllers. The feedforward part generates a reference for the current scanned line based on the previously scanned one. We discuss in detail various aspects of the presented control approach and its implications for scanning quantum dot microscopy. We evaluate the influence of the feedforward part and compare the two proposed feedback controllers. The proposed control algorithms speed up scanning quantum dot microscopy by more than a magnitude and enable to scan large sample areas.

eess.SY↗

arXiv2019

Inelastic electron tunneling spectroscopy for probing strongly correlated many-body systems by scanning tunneling microscopy

We present an extension of the tunneling theory for scanning tunneling microcopy (STM) to include different types of vibrational-electronic couplings responsible for inelastic contributions to the tunnel current in the strong-coupling limit. It allows for a better understanding of more complex scanning tunneling spectra of molecules on a metallic substrate in separating elastic and inelastic contributions. The starting point is the exact solution of the spectral functions for the electronic active local orbitals in the absence of the STM tip. This includes electron-phonon coupling in the coupled system comprising the molecule and the substrate to arbitrary order including the anti-adiabatic strong coupling regime as well as the Kondo effect on a free electron spin of the molecule. The tunneling current is derived in second order of the tunneling matrix element which is expanded in powers of the relevant vibrational displacements. We use the results of an ab-initio calculation for the single-particle electronic properties as an adapted material-specific input for a numerical renormalization group approach for accurately determining the electronic properties of a NTCDA molecule on Ag(111) as a challenging sample system for our theory. Our analysis shows that the mismatch between the ab-initio many-body calculation of the tunnel current in the absence of any electron-phonon coupling to the experiment scanning tunneling spectra can be resolved by including two mechanisms: (i) a strong unconventional Holstein term on the local substrate orbital leads to reduction of the Kondo temperature and (ii) a different electron-vibrational coupling to the tunneling matrix element is responsible for inelastic steps in the $dI/dV$ curve at finite frequencies.

cond-mat.mes-hall↗

arXiv2015

Scanning Quantum Dot Microscopy

Interactions between atomic and molecular objects are to a large extent defined by the nanoscale electrostatic potentials which these objects produce. We introduce a scanning probe technique that enables three-dimensional imaging of local electrostatic potential fields with sub-nanometer resolution. Registering single electron charging events of a molecular quantum dot attached to the tip of a (qPlus tuning fork) atomic force microscope operated at 5 K, we quantitatively measure the quadrupole field of a single molecule and the dipole field of a single metal adatom, both adsorbed on a clean metal surface. Because of its high sensitivity, the technique can record electrostatic potentials at large distances from their sources, which above all will help to image complex samples with increased surface roughness.

cond-mat.mes-hall↗

arXiv2014

The origin of high-resolution IETS-STM images of organic molecules with functionalized tips

Recently, the family of high-resolution scanning probe imaging techniques using decorated tips has been complimented by a method based on inelastic electron tunneling spectroscopy (IETS). The new technique resolves the inner structure of organic molecules by mapping the vibrational energy of a single carbonmonoxide (CO) molecule positioned at the apex of a scanning tunnelling microscope (STM) tip. Here, we explain high-resolution IETS imaging by extending the model developed earlier for STM and atomic force microscopy (AFM) imaging with decorated tips. In particular, we show that the tip decorated with CO acts as a nanoscale sensor that changes the energy of the CO frustrated translation in response to the change of the local curvature of the surface potential. In addition, we show that high resolution AFM, STM and IETS-STM images can deliver information about intramolecular charge transfer for molecules deposited on a~surface. To demonstrate this, we extended our numerical model by taking into the account the electrostatic force acting between the decorated tip and surface Hartree potential.

cond-mat.mes-hall↗

arXiv2014

The mechanism of high-resolution STM/AFM imaging with functionalized tips

High resolution Atomic Force Microscopy (AFM) and Scanning Tunnelling Microscopy (STM) imaging with functionalized tips is well established, but a detailed understanding of the imaging mechanism is still missing. We present a numerical STM/AFM model, which takes into account the relaxation of the probe due to the tip-sample interaction. We demonstrate that the model is able to reproduce very well not only the experimental intra- and intermolecular contrasts, but also their evolution upon tip approach. At close distances, the simulations unveil a significant probe particle relaxation towards local minima of the interaction potential. This effect is responsible for the sharp sub-molecular resolution observed in AFM/STM experiments. In addition, we demonstrate that sharp apparent intermolecular bonds should not be interpreted as true hydrogen bonds, in the sense of representing areas of increased electron density. Instead they represent the ridge between two minima of the potential energy landscape due to neighbouring atoms.

cond-mat.mes-hall↗

arXiv2011

Dynamical bi-stability of single-molecule junctions: A combined experimental/theoretical study of PTCDA on Ag(111)

The dynamics of a molecular junction consisting of a PTCDA molecule between the tip of a scanning tunneling microscope and a Ag(111) surface have been investigated experimentally and theoretically. Repeated switching of a PTCDA molecule between two conductance states is studied by low-temperature scanning tunneling microscopy for the first time, and is found to be dependent on the tip-substrate distance and the applied bias. Using a minimal model Hamiltonian approach combined with density-functional calculations, the switching is shown to be related to the scattering of electrons tunneling through the junction, which progressively excite the relevant chemical bond. Depending on the direction in which the molecule switches, different molecular orbitals are shown to dominate the transport and thus the vibrational heating process. This in turn can dramatically affect the switching rate, leading to non-monotonic behavior with respect to bias under certain conditions. In this work, rather than simply assuming a constant density of states as in previous works, it was modeled by Lorentzians. This allows for the successful description of this non-monotonic behavior of the switching rate, thus demonstrating the importance of modeling the density of states realistically.

cond-mat.mes-hall↗

arXiv2008

Quantum transport through STM-lifted single PTCDA molecules

Using a scanning tunneling microscope we have measured the quantum conductance through a PTCDA molecule for different configurations of the tip-molecule-surface junction. A peculiar conductance resonance arises at the Fermi level for certain tip to surface distances. We have relaxed the molecular junction coordinates and calculated transport by means of the Landauer/Keldysh approach. The zero bias transmission calculated for fixed tip positions in lateral dimensions but different tip substrate distances show a clear shift and sharpening of the molecular chemisorption level on increasing the STM-surface distance, in agreement with experiment.

cond-mat.mes-hall↗