arXiv subjects

Rutger van Haasteren

Publications and source records attributed to Rutger van Haasteren.

At least 37 records · Page 2Linked to original sources

arXiv2025

Solving the PTA Data Analysis Problem with a Global Gibbs Scheme

The announcement in the summer of 2023 about the discovery of evidence for a gravitational wave background (GWB) using pulsar timing arrays (PTAs) has ignited both the PTA and the larger scientific community's interest in the experiment and the scientific implications of its findings. As a result, numerous scientific works have been published analyzing and further developing various aspects of the experiment, from performing tests of gravity to improving the efficiency of the current data analysis techniques. In this regard, we contribute to the recent advancements in the field of PTAs by presenting the most general, agnostic, per-frequency Bayesian search for a low-frequency (red) noise process in these data. Our new method involves the use of a conjugate Jeffrey's-like multivariate prior which allows one to model all unique parameters of the global PTA-level red noise covariance matrix as a separate model parameter for which a marginalized posterior-probability distribution can be found using Gibbs sampling. Even though perfecting the implementation of the Gibbs sampling and mitigating the numerical stability challenges require further development, we show the power of this new method by analyzing realistic and theoretical PTA simulated data sets. We show how our technique is consistent with the more restricted standard techniques in recovering both the auto and the cross-spectrum of pulsars' low-frequency (red) noise. Furthermore, we highlight ways to approximately characterize a GWB (both its auto- and cross-spectrum) using Fourier coefficient estimates from single-pulsar and so-called CURN (common uncorrelated red noise) analyses via analytic draws from a specific Inverse-Wishart distribution.

astro-ph.IM↗

arXiv2025

The NANOGrav 15-year Data Set: Search for Gravitational Wave Memory

We present the results of a search for nonlinear gravitational wave memory in the NANOGrav 15-year data set. We find no significant evidence for memory signals in the dataset, with a maximum Bayes factor of 3.1 in favor of a model including memory. We therefore place upper limits on the strain of potential gravitational wave memory events as a function of sky location and observing epoch. We find upper limits that are not always more constraining than previous NANOGrav results. We show that it is likely due to the increase in common red noise between the 12.5-year and 15-year NANOGrav datasets.

gr-qc↗

arXiv2025

The NANOGrav 15 yr Data Set: Running of the Spectral Index

The NANOGrav 15-year data provides compelling evidence for a stochastic gravitational-wave (GW) background at nanohertz frequencies. The simplest model-independent approach to characterizing the frequency spectrum of this signal consists in a simple power-law fit involving two parameters: an amplitude A and a spectral index γ. In this paper, we consider the next logical step beyond this minimal spectral model, allowing for a running (i.e., logarithmic frequency dependence) of the spectral index, γ_run(f) = γ+ β\ln(f/f_ref). We fit this running-power-law (RPL) model to the NANOGrav 15-year data and perform a Bayesian model comparison with the minimal constant-power-law (CPL) model, which results in a 95% credible interval for the parameter βconsistent with no running, β\in [-0.80,2.96], and an inconclusive Bayes factor, B(RPL vs. CPL) = 0.69 +- 0.01. We thus conclude that, at present, the minimal CPL model still suffices to adequately describe the NANOGrav signal; however, future data sets may well lead to a measurement of nonzero β. Finally, we interpret the RPL model as a description of primordial GWs generated during cosmic inflation, which allows us to combine our results with upper limits from big-bang nucleosynthesis, the cosmic microwave background, and LIGO-Virgo-KAGRA.

astro-ph.HE↗

arXiv2024

Use Model Averaging instead of Model Selection in Pulsar Timing

Over the past decade and a half, adoption of Bayesian inference in pulsar timing analysis has led to increasingly sophisticated models. The recent announcement of evidence for a stochastic background of gravitational waves by various pulsar timing array projects highlighted Bayesian inference as a central tool for parameter estimation and model selection. Despite its success, Bayesian inference is occasionally misused in the pulsar timing community. A common workflow is that the data is analyzed in multiple steps: a first analysis of single pulsars individually, and a subsequent analysis of the whole array of pulsars. A mistake that is then sometimes introduced stems from using the posterior distribution to craft the prior for the analysis of the same data in a second step, a practice referred to in the statistics literature as ``circular analysis.'' This is done to prune the model for computational efficiency. Multiple recent high-profile searches for gravitational waves by pulsar timing array (PTA) projects have this workflow. This letter highlights this error and suggests that Spike and Slab priors can be used to carry out model averaging instead of model selection in a single pass. Spike and Slab priors are proved to be equal to Log-Uniform priors.

astro-ph.IM↗

arXiv2024

Pulsar Timing Arrays require hierarchical models

Pulsar Timing Array projects have found evidence of a stochastic background of gravitational waves (GWB) using data from an ensemble of pulsars. In the literature, minimal assumptions are made about the signal and noise processes that affect data from these pulsars, such as pulsar spin noise. These assumptions are encoded as uninformative priors in Bayesian searches, though Frequentist approaches make similar assumptions. Uninformative priors are not suitable for (noise) properties of pulsars in an ensemble, and they bias estimates of model parameters such as gravitational-wave signal parameters. Both Frequentist and Bayesian searches are affected. In this letter, more appropriate priors are proposed in the language of Hierarchical Bayesian Modeling, where the properties of the ensemble of pulsars are jointly described with the properties of the individual components of the ensemble. Results by Pulsar Timing Array projects should be re-evaluated using Hierarchical Models.

astro-ph.IM↗

arXiv2024

The NANOGrav 15 yr Data Set: Harmonic Analysis of the Pulsar Angular Correlations

Pulsar timing array observations have found evidence for an isotropic gravitational wave background with the Hellings-Downs angular correlations, expected from general relativity. This interpretation hinges on the measured shape of the angular correlations, which is predominately quadrupolar under general relativity. Here we explore a more flexible parameterization: we expand the angular correlations into a sum of Legendre polynomials and use a Bayesian analysis to constrain their coefficients with the 15-year pulsar timing data set collected by the North American Nanohertz Observatory for Gravitational Waves (NANOGrav). When including Legendre polynomials with multipoles $\ell \geq 2$, we only find a significant signal in the quadrupole with an amplitude consistent with general relativity and non-zero at the $\sim 95\%$ confidence level and a Bayes factor of 200. When we include multipoles $\ell \leq 1$, the Bayes factor evidence for quadrupole correlations decreases by more than an order of magnitude due to evidence for a monopolar signal at approximately 4 nHz which has also been noted in previous analyses of the NANOGrav 15-year data. Further work needs to be done in order to better characterize the properties of this monopolar signal and its effect on the evidence for quadrupolar angular correlations.

astro-ph.HE↗

arXiv2024

PINT: Maximum-likelihood estimation of pulsar timing noise parameters

PINT is a pure-Python framework for high-precision pulsar timing developed on top of widely used and well-tested Python libraries, supporting both interactive and programmatic data analysis workflows. We present a new frequentist framework within PINT to characterize the single-pulsar noise processes present in pulsar timing datasets. This framework enables the parameter estimation for both uncorrelated and correlated noise processes as well as the model comparison between different timing and noise models in a computationally inexpensive way. We demonstrate the efficacy of the new framework by applying it to simulated datasets as well as a real dataset of PSR B1855+09. We also describe the new features implemented in PINT since it was first described in the literature.

astro-ph.IM↗

arXiv2023

How to Detect an Astrophysical Nanohertz Gravitational-Wave Background

Analysis of pulsar timing data have provided evidence for a stochastic gravitational wave background in the nHz frequency band. The most plausible source of such a background is the superposition of signals from millions of supermassive black hole binaries. The standard statistical techniques used to search for such a background and assess its significance make several simplifying assumptions, namely: i) Gaussianity; ii) isotropy; and most often iii) a power-law spectrum. However, a stochastic background from a finite collection of binaries does not exactly satisfy any of these assumptions. To understand the effect of these assumptions, we test standard analysis techniques on a large collection of realistic simulated datasets. The dataset length, observing schedule, and noise levels were chosen to emulate the NANOGrav 15-year dataset. Simulated signals from millions of binaries drawn from models based on the Illustris cosmological hydrodynamical simulation were added to the data. We find that the standard statistical methods perform remarkably well on these simulated datasets, despite their fundamental assumptions not being strictly met. They are able to achieve a confident detection of the background. However, even for a fixed set of astrophysical parameters, different realizations of the universe result in a large variance in the significance and recovered parameters of the background. We also find that the presence of loud individual binaries can bias the spectral recovery of the background if we do not account for them.

gr-qc↗

arXiv2023

The Need For Speed: Rapid Refitting Techniques for Bayesian Spectral Characterization of the Gravitational Wave Background Using PTAs

Pulsar timing arrays (PTAs) have recently found evidence for a nanohertz-frequency stochastic gravitational-wave background (SGWB). Constraining its spectral characteristics will reveal its origins. To achieve this, we must understand how data and modeling conditions in each pulsar influence the precision and accuracy of SGWB spectral recovery, typically requiring many Bayesian analyses on real data sets and large-scale simulations that are slow and computationally taxing. To combat this, we have developed several new rapid approaches that operate on intermediate SGWB analysis products. These techniques refit SGWB spectral models to previously computed Bayesian posterior estimates of the timing power spectra. We test our new techniques on simulated PTA data sets and the NANOGrav 12.5-year data set, where in the latter our refit posterior achieves a Hellinger distance -- bounded between 0 for identical distributions and 1 for zero overlap -- from the current full production-level pipeline that is < 0.1. Our techniques are ~ $10^2$--$10^4$ times faster than the production-level likelihood and scale much more favorably (sub-linearly) as a PTA is expanded with new pulsars or observations. Our techniques also allow us to demonstrate conclusively that SGWB spectral characterization in PTA data sets is driven by the longest-timed pulsars and the best-measured power spectral densities. Indeed, the common-process spectral properties found in the NANOGrav 12.5-year data set are given by analyzing only the ~14 longest-timed pulsars out of the full 45 pulsar array, and we find that the 'shallowing' of the common-process power-law model occurs when gravitational-wave frequencies higher than ~50 nanohertz are included. The implementation of our techniques is openly available as a software suite to allow fast and flexible PTA SGWB spectral characterization and model selection.

astro-ph.HE↗

arXiv2023

Exploring the Capabilities of Gibbs Sampling in Pulsar Timing Arrays

We explore the use of Gibbs sampling in estimating the noise properties of individual pulsars and illustrate its effectiveness using the NANOGrav 11-year data set. We find that Gibbs sampling noise modeling (GM) is more efficient than the current standard Bayesian techniques (SM) for single pulsar analyses by yielding model parameter posteriors with average effective-sample-size ratio (GM/SM) of 6 across all parameters and pulsars. Furthermore, the output of GM contains posteriors for the Fourier coefficients that can be used to characterize the underlying red noise process of any pulsar's timing residuals, which are absent in current implementations of SM. Through simulations, we demonstrate the potential for such coefficients to measure the spatial cross-correlations between pulsar pairs produced by a gravitational wave background.

astro-ph.IM↗

arXiv2023

The NANOGrav 15-year Data Set: Bayesian Limits on Gravitational Waves from Individual Supermassive Black Hole Binaries

Evidence for a low-frequency stochastic gravitational wave background has recently been reported based on analyses of pulsar timing array data. The most likely source of such a background is a population of supermassive black hole binaries, the loudest of which may be individually detected in these datasets. Here we present the search for individual supermassive black hole binaries in the NANOGrav 15-year dataset. We introduce several new techniques, which enhance the efficiency and modeling accuracy of the analysis. The search uncovered weak evidence for two candidate signals, one with a gravitational-wave frequency of $\sim$4 nHz, and another at $\sim$170 nHz. The significance of the low-frequency candidate was greatly diminished when Hellings-Downs correlations were included in the background model. The high-frequency candidate was discounted due to the lack of a plausible host galaxy, the unlikely astrophysical prior odds of finding such a source, and since most of its support comes from a single pulsar with a commensurate binary period. Finding no compelling evidence for signals from individual binary systems, we place upper limits on the strain amplitude of gravitational waves emitted by such systems.

astro-ph.HE↗

arXiv2023

Efficient Gravitational Wave Searches with Pulsar Timing Arrays using Hamiltonian Monte Carlo

Pulsar timing arrays (PTAs) detect low-frequency gravitational waves (GWs) by looking for correlated deviations in pulse arrival times. Current Bayesian searches use Markov Chain Monte Carlo (MCMC) methods, which struggle to sample the large number of parameters needed to model the PTA and GW signals. As the data span and number of pulsars increase, this problem will only worsen. An alternative Monte Carlo sampling method, Hamiltonian Monte Carlo (HMC), utilizes Hamiltonian dynamics to produce sample proposals informed by first-order gradients of the model likelihood. This in turn allows it to converge faster to high dimensional distributions. We implement HMC as an alternative sampling method in our search for an isotropic stochastic GW background, and show that this method produces equivalent statistical results to similar analyses run with standard MCMC techniques, while requiring 100-200 times fewer samples. We show that the speed of HMC sample generation scales as $\mathcal{O}(N_\mathrm{psr}^{5/4})$ where $N_\mathrm{psr}$ is the number of pulsars, compared to $\mathcal{O}(N_\mathrm{psr}^2)$ for MCMC methods. These factors offset the increased time required to generate a sample using HMC, demonstrating the value of adopting HMC techniques for PTAs.

astro-ph.IM↗

arXiv2021

PINT: A Modern Software Package for Pulsar Timing

Over the past few decades, the measurement precision of some pulsar-timing experiments has advanced from ~10 us to ~10 ns, revealing many subtle phenomena. Such high precision demands both careful data handling and sophisticated timing models to avoid systematic error. To achieve these goals, we present PINT (PINT Is Not Tempo3), a high-precision Python pulsar timing data analysis package, which is hosted on GitHub and available on Python Package Index (PyPI) as pint-pulsar. PINT is well-tested, validated, object-oriented, and modular, enabling interactive data analysis and providing an extensible and flexible development platform for timing applications. It utilizes well-debugged public Python packages (e.g., the NumPy and Astropy libraries) and modern software development schemes (e.g., version control and efficient development with git and GitHub) and a continually expanding test suite for improved reliability, accuracy, and reproducibility. PINT is developed and implemented without referring to, copying, or transcribing the code from other traditional pulsar timing software packages (e.g., TEMPO and TEMPO2) and therefore provides a robust tool for cross-checking timing analyses and simulating pulse arrival times. In this paper, we describe the design, usage, and validation of PINT, and we compare timing results between it and TEMPO and TEMPO2.

astro-ph.IM↗

arXiv2020

From Bright Binaries To Bumpy Backgrounds: Mapping Realistic Gravitational Wave Skies With Pulsar-Timing Arrays

Within the next several years, pulsar-timing array programs will likely usher in the next era of gravitational-wave astronomy through the detection of a stochastic background of nanohertz-frequency gravitational waves, originating from a cosmological population of inspiraling supermassive binary black holes. While the source positions will likely be isotropic to a good approximation, the gravitational-wave angular power distribution will be anisotropic, with the most massive and/or nearby binaries producing signals that may resound above the background. We study such a realistic angular power distribution, developing fast and accurate sky-mapping strategies to localize pixels and extended regions of excess power while simultaneously modeling the background signal from the less massive and more distant ensemble. We find that power anisotropy will be challenging to discriminate from isotropy for realistic gravitational-wave skies, requiring SNR $>10$ in order to favor anisotropy with $10:1$ posterior odds in our case study. Amongst our techniques, modeling the population signal with multiple point sources in addition to an isotropic background provides the most physically-motivated and easily interpreted maps, while spherical-harmonic modeling of the square-root power distribution, $P(\hatΩ)^{1/2}$, performs best in discriminating from overall isotropy. Our techniques are modular and easily incorporated into existing pulsar-timing array analysis pipelines.

astro-ph.IM↗

arXiv2018

The NANOGrav 11-year Data Set: High-precision timing of 45 Millisecond Pulsars

We present high-precision timing data over time spans of up to 11 years for 45 millisecond pulsars observed as part of the North American Nanohertz Observatory for Gravitational Waves (NANOGrav) project, aimed at detecting and characterizing low-frequency gravitational waves. The pulsars were observed with the Arecibo Observatory and/or the Green Bank Telescope at frequencies ranging from 327 MHz to 2.3 GHz. Most pulsars were observed with approximately monthly cadence, with six high--timing-precision pulsars observed weekly, and all were observed at widely separated frequencies at each observing epoch in order to fit for time-variable dispersion delays. We describe our methods for data processing, time-of-arrival (TOA) calculation, and the implementation of a new, automated method for removing outlier TOAs. We fit a timing model for each pulsar that includes spin, astrometric, and, if necessary, binary parameters, in addition to time-variable dispersion delays and parameters that quantify pulse-profile evolution with frequency. The new timing solutions provide three new parallax measurements, two new Shapiro delay measurements, and two new measurements of large orbital-period variations. We fit models that characterize sources of noise for each pulsar. We find that 11 pulsars show significant red noise, with generally smaller spectral indices than typically measured for non-recycled pulsars, possibly suggesting a different origin. Future papers will use these data to constrain or detect the signatures of gravitational-wave signals.

astro-ph.HE↗

arXiv2016

Taming outliers in pulsar-timing datasets with hierarchical likelihoods and Hamiltonian sampling

Pulsar-timing datasets have been analyzed with great success using probabilistic treatments based on Gaussian distributions, with applications ranging from studies of neutron-star structure to tests of general relativity and searches for nanosecond gravitational waves. As for other applications of Gaussian distributions, outliers in timing measurements pose a significant challenge to statistical inference, since they can bias the estimation of timing and noise parameters, and affect reported parameter uncertainties. We describe and demonstrate a practical end-to-end approach to perform Bayesian inference of timing and noise parameters robustly in the presence of outliers, and to identify these probabilistically. The method is fully consistent (i.e., outlier-ness probabilities vary in tune with the posterior distributions of the timing and noise parameters), and it relies on the efficient sampling of the hierarchical form of the pulsar-timing likelihood. Such sampling has recently become possible with a "no-U-turn" Hamiltonian sampler coupled to a highly customized reparametrization of the likelihood; this code is described elsewhere, but it is already available online. We recommend our method as a standard step in the preparation of pulsar-timing-array datasets: even if statistical inference is not affected, follow-up studies of outlier candidates can reveal unseen problems in radio observations and timing measurements; furthermore, confidence in the results of gravitational-wave searches will only benefit from stringent statistical evidence that datasets are clean and outlier-free.

astro-ph.IM↗

arXiv2015

European Pulsar Timing Array Limits on Continuous Gravitational Waves from Individual Supermassive Black Hole Binaries

We have searched for continuous gravitational wave (CGW) signals produced by individually resolvable, circular supermassive black hole binaries (SMBHBs) in the latest EPTA dataset, which consists of ultra-precise timing data on 41 millisecond pulsars. We develop frequentist and Bayesian detection algorithms to search both for monochromatic and frequency-evolving systems. None of the adopted algorithms show evidence for the presence of such a CGW signal, indicating that the data are best described by pulsar and radiometer noise only. Depending on the adopted detection algorithm, the 95\% upper limit on the sky-averaged strain amplitude lies in the range $6\times 10^{-15} 10^9$M$_\odot$ out to a distance of about 25Mpc, and with $\cal{M}_c>10^{10}$M$_\odot$ out to a distance of about 1Gpc ($z\approx0.2$). We show that state-of-the-art SMBHB population models predict $<1\%$ probability of detecting a CGW with the current EPTA dataset, consistent with the reported non-detection. We stress, however, that PTA limits on individual CGW have improved by almost an order of magnitude in the last five years. The continuing advances in pulsar timing data acquisition and analysis techniques will allow for strong astrophysical constraints on the population of nearby SMBHBs in the coming years.

astro-ph.CO↗

arXiv2015

European Pulsar Timing Array Limits On An Isotropic Stochastic Gravitational-Wave Background

We present new limits on an isotropic stochastic gravitational-wave background (GWB) using a six pulsar dataset spanning 18 yr of observations from the 2015 European Pulsar Timing Array data release. Performing a Bayesian analysis, we fit simultaneously for the intrinsic noise parameters for each pulsar, along with common correlated signals including clock, and Solar System ephemeris errors, obtaining a robust 95$\%$ upper limit on the dimensionless strain amplitude $A$ of the background of $A<3.0\times 10^{-15}$ at a reference frequency of $1\mathrm{yr^{-1}}$ and a spectral index of $13/3$, corresponding to a background from inspiralling super-massive black hole binaries, constraining the GW energy density to $Ω_\mathrm{gw}(f)h^2 < 1.1\times10^{-9}$ at 2.8 nHz. We also present limits on the correlated power spectrum at a series of discrete frequencies, and show that our sensitivity to a fiducial isotropic GWB is highest at a frequency of $\sim 5\times10^{-9}$~Hz. Finally we discuss the implications of our analysis for the astrophysics of supermassive black hole binaries, and present 95$\%$ upper limits on the string tension, $Gμ/c^2$, characterising a background produced by a cosmic string network for a set of possible scenarios, and for a stochastic relic GWB. For a Nambu-Goto field theory cosmic string network, we set a limit $Gμ/c^2<1.3\times10^{-7}$, identical to that set by the {\it Planck} Collaboration, when combining {\it Planck} and high-$\ell$ Cosmic Microwave Background data from other experiments. For a stochastic relic background we set a limit of $Ω^\mathrm{relic}_\mathrm{gw}(f)h^2<1.2 \times10^{-9}$, a factor of 9 improvement over the most stringent limits previously set by a pulsar timing array.

astro-ph.CO↗