Searcharxiv⌕ Search

arXiv subjects

Ryan Gilbert

Publications and source records attributed to Ryan Gilbert.

3 recordsLinked to original sources

$>3\text{ W/mm}$ Output Power $\mathrm{Al}_{0.61}\mathrm{Ga}_{0.39}\mathrm{N}$ Channel HEMT with $24.4\%$ Associated PAE at $10\text{ GHz}$

In this work, an ultra-wide bandgap (UWBG) high-electron-mobility transistor (HEMT) was fabricated using an $\mathrm{Al}_{0.76}\mathrm{Ga}_{0.24}\mathrm{N}$ barrier and an $\mathrm{Al}_{0.61}\mathrm{Ga}_{0.39}\mathrm{N}$ channel with thick $\mathrm{SiO}_2$ passivation. The device demonstrated low current collapse at $40\text{ V}$ drain bias. At $10\text{ GHz}$, the device exhibited an output power of $3.07\text{ W/mm}$ with an associated power-added efficiency (PAE) of $24.4\%$. A peak PAE of $33.9\%$ was achieved at an associated output power of $2.14\text{ W/mm}$. This excellent large-signal performance highlights the strong potential of UWBG $\mathrm{AlGaN}$ channel devices for X-band applications.

physics.app-ph↗

Demonstration of high output power (3.75 W/mm) with 31.8% PAE in Ga-Polar AlGaN/GaN HEMTs on sapphire at 94 GHz

In this work, a recessed-gate Ga-polar AlGaN/GaN high-electron-mobility transistor (HEMT) on sapphire incorporating an AlGaN back-barrier for W-band operation is demonstrated. The device achieves a subthreshold slope of ~130 mV/dec, a peak transconductance of 0.75 S/mm, and an fmax exceeding 240 GHz. Continuous-wave load-pull measurements at 94 GHz show an output power of 3.75 W/mm with a power-added efficiency of 31.8%. This performance significantly exceeds the best previously reported Ga-polar devices on sapphire and approaches that of state-of-the-art Ga-polar devices on SiC, which provides a promising pathway toward high-performance W-band devices.

physics.app-ph↗

Passivation-Free Ga-Polar AlGaN/GaN Recessed-Gate HEMTs on Sapphire with 2.8 W/mm POUT and 26.8% PAE at 94 GHz

In this work, we demonstrate a passivation-free Ga-polar recessed-gate AlGaN/GaN HEMT on a sapphire substrate for W-band operation, featuring a 5.5 nm Al0.35Ga0.65N barrier under the gate and a 31 nm Al0.35Ga0.65N barrier in the gate access regions. The device achieves a drain current density of 1.8 A/mm, a peak transconductance of 750 mS/mm, and low gate leakage with a high on/off ratio of 10^7. Small-signal characterization reveals a current-gain cutoff frequency of 127 GHz and a maximum oscillation frequency of 203 GHz. Continuous-wave load-pull measurements at 94 GHz demonstrate an output power density of 2.8 W/mm with 26.8% power-added efficiency (PAE), both of which represent the highest values reported for Ga-polar GaN HEMTs on sapphire substrates and are comparable to state-of-the-art Ga-polar GaN HEMTs on SiC substrates. Considering the low cost of sapphire, the simplicity of the epitaxial design, and the reduced fabrication complexity relative to N-polar devices, this work highlights the potential of recessed-gate Ga-polar AlGaN/GaN HEMTs on sapphire as a promising candidate for next-generation millimeter-wave power applications.

physics.app-ph↗