arXiv subjects

Ryoto Sekine

Publications and source records attributed to Ryoto Sekine.

At least 19 recordsLinked to original sources

arXiv2026

Laser electro-optic frequency comb in lithium niobate nanophotonics

Optical frequency combs have revolutionized precision science and technology, yet their nanophotonic implementations have failed to simultaneously achieve high efficiency, power, and coherence. Optically driven microcombs provide broad and stable spectra but low usable power, whereas active comb generators, including mode-locked lasers, can be efficient yet offer less control over coherence. We introduce the laser electro-optic (LEO) frequency comb, a comb-generation mechanism in which coherent continuous-wave injection drives a phase-modulated laser cavity above threshold into a distinct operating regime. Unlike other coherently driven integrated comb sources, the LEO comb generates comb powers that exceed the injected continuous-wave power by an order of magnitude. We realize the LEO comb in a hybrid lithium niobate/III-V nanophotonic circuit and demonstrate milliwatt-level power per comb line, 1.76-ps pulses, a 4.7-nm background-free spectrum, and linewidths as narrow as 19.6 kHz. By unifying high efficiency, power, and coherence, this architecture establishes a definitive route to chip-scale frequency comb sources that deliver on the promise of scalable, high-performance coherent optical technologies.

physics.optics↗

arXiv2026

Quantum Frequency Resolved Optical Gating of Few-Cycle Squeezed Vacuum

Offering terahertz of bandwidths and femtosecond timescales, ultrafast optics is enabling both the study of fundamental quantum optical phenomena and the advancement of quantum-enhanced applications. However, unlocking the full potential of ultrafast quantum optics requires accessing the temporal characteristics of ultrashort quantum pulses across ultrabroad bandwidths. This is particularly important in the near-infrared and visible range of the optical spectrum, which, unlike the terahertz and long-wave infrared, has remained beyond the reach of current techniques. Here, we break this barrier by translating frequency-resolved optical gating (FROG), a widely used technique for ultrafast classical pulse characterization, to the quantum regime. We show how such a quantum FROG can measure complex temporal modes and sub-optical-cycle quadrature covariances in the near-infrared, enabling complete characterization of microscopic Gaussian states. We experimentally use the quantum-FROG to report the measurement of quadrature correlations, complex temporal modes, and squeezing levels of multimode ultrafast squeezed vacuum states generated on a nanophotonic chip. We access multimode squeezing levels of a femtosecond quantum pulse approaching 7 dB and demonstrate FROG-based measurement bandwidths exceeding 100 THz. Quantum FROG enables measurement of previously inaccessible quantum features of ultrashort pulses at the sub-optical-cycle regime and highlights a practical path to accessing terahertz of bandwidths in quantum optics for applications in computing, sensing, and imaging.

physics.optics↗

arXiv2026

Visible dual-comb spectroscopy across more than 100 THz with lithium niobate nanophotonic waveguides

Broadband and high-resolution spectroscopy in the visible and ultraviolet is central to advances in multiple fields, including fundamental quantum physics, biology, atmospheric science and astronomy. Traditionally, these measurements are performed with grating or Fourier-transform spectrometers using incoherent light sources. Leveraging coherent light enables powerful frequency-comb-based techniques, but is limited by the technical complexity of efficiently generating broad spectral bandwidths from relatively narrowband and spectrally distant laser sources. Current visible dual-comb spectrometers require implicit compromises between optical bandwidth, experimental simplicity, and acquisition speed. In this work, we introduce a simple and efficient dual-comb spectrometer that converts robust Er:fiber frequency combs from the near-infrared to the ultraviolet and visible with thin-film lithium niobate (TFLN) nanophotonic waveguides. Using real-time signal processing, we retrieve coherently averaged dual-comb spectra over nearly 120 THz of simultaneous bandwidth in the visible with 100 MHz spectral resolution. With these capabilities, we measure the broadband absorption spectrum of molecular iodine (I2), demonstrating the broadest visible spectral coverage of a dual-comb spectrometer to date. Additional measurements of NO2, atomic rubidium, and atomic sodium further illustrate the achievable combination of spectroscopic bandwidth, resolution, and intrinsic frequency accuracy. Our results demonstrate the powerful integration of low-power frequency combs, nonlinear nanophotonics, and digital signal processing to enable a compact, efficient and versatile approach to high-resolution mapping of complex absorption spectra across 500 THz in the UV-visible and near-infrared spectral regions for multiple applications beyond the research lab

physics.optics↗

arXiv2025

Topological Soliton Frequency Comb in Nanophotonic Lithium Niobate

Frequency combs have revolutionized metrology, ranging, and optical clocks, which have motivated substantial efforts on the development of chip-scale comb sources. The on-chip comb sources are currently based on electro-optic modulation, mode-locked lasers, quantum cascade lasers, or soliton formation via Kerr nonlinearity. However, the widespread deployment of on-chip comb sources has remained elusive as they still require RF sources, high-Q resonators, or complex stabilization schemes while facing efficiency challenges. Here, we demonstrate an on-chip source of frequency comb based on the integration of a lithium niobate nanophotonic circuit with a semiconductor laser that can alleviate these challenges. For the first time, we show the formation of temporal topological solitons in a on-chip nanophotonic parametric oscillator with quadratic nonlinearity and low finesse. These solitons, independent of the dispersion regime, consist of phase defects separating two $π$-out-of-phase continuous wave solutions at the signal frequency, which is at half the input pump frequency. We use on-chip cross-correlation for temporal measurements and confirm formation of topological solitons as short as 60 fs around 2 $μ$m, in agreement with a generalized parametrically forced Ginzburg-Landau theory. Moreover, we demonstrate a proof-of-concept turn-key operation of a hybrid-integrated source of topological frequency comb. Topological solitons offer a new paradigm for integrated comb sources, which are dispersion-sign agnostic and do not require high-Q resonators or high-speed modulators and can provide access to hard-to-access spectral regions, including mid-infrared.

physics.optics↗

arXiv2025

Ultrafast All-Optical Measurement of Squeezed Vacuum in a Lithium Niobate Nanophotonic Circuit

Squeezed vacuum, a fundamental resource for continuous-variable quantum information processing, has been used to demonstrate quantum advantages in sensing, communication, and computation. While most experiments use homodyne detection to characterize squeezing and are therefore limited to electronic bandwidths, recent experiments have shown optical parametric amplification (OPA) to be a viable measurement strategy. Here, we realize OPA-based quantum state tomography in integrated photonics and demonstrate the generation and all-optical Wigner tomography of squeezed vacuum in a nanophotonic circuit. We employ dispersion-engineering to enable the distortion-free propagation of femtosecond pulses and achieve ultrabroad operation bandwidths, effectively lifting the speed restrictions imposed by traditional electronics on quantum measurements with a theoretical maximum clock speed of 6.5 THz. We implement our circuit on thin-film lithium niobate, a platform compatible with a wide variety of active and passive photonic components. Our results chart a course for realizing all-optical ultrafast quantum information processing in an integrated room-temperature platform.

quant-ph↗

arXiv2025

Quadratic Supercontinuum Generation from UV to Mid-IR in Lithium Niobate Nanophotonics

Supercontinuum light sources are widely used for applications ranging from imaging to sensing and frequency comb stabilization. The most common mechanisms for their generation rely on cubic nonlinearities, for instance in crystals, optical fibers, and integrated photonics. However, quadratic supercontinuum generation (QSCG) offers potential for enhanced energy efficiency and broader spectral coverage because of the typically much stronger nonlinearity and ability to achieve both coherent up- and down-conversion via three-wave mixing processes. Despite such potentials, demonstrations of QSCG in integrated photonic waveguides have been sparse and have barely surpassed their cubic counterparts in terms of spectral coverage and energy-efficiency. Here, we introduce a new dispersion engineering principle and experimentally demonstrate purely quadratic supercontinuum generation in lithium niobate nano-waveguides substantially outperforming previous demonstrations in integrated photonics. In one device, by engineering a near-zero dispersion profile and using a single poling period for quasi-phase matched saturated second-harmonic generation, we achieve robust and energy efficient multi-octave QSCG with only femtojoules of pump pulse energy. In another device, we use a flat dispersion profile with two distant zero crossings of group velocity dispersion (GVD) to achieve broadband difference-frequency generation (DFG) for extending the spectral coverage further into the mid-IR and cover the entire transparency window of lithium niobate from 350 nm to 5000 nm. Our results showcase how DFG-assisted QSCG can access hard-to-access spectral regions in an energy-efficient fashion by properly utilizing dispersion engineering and quasi-phase matching.

physics.optics↗

arXiv2025

Two-optical-cycle pulses from nanophotonic two-color soliton compression

Few- and single-cycle optical pulses and their associated ultra-broadband spectra have been crucial in the progress of ultrafast science and technology. Moreover, multi-color waveforms composed of independently manipulable ultrashort pulses in distinct spectral bands offer unique advantages in pulse synthesis and attosecond science. However, the generation and control of ultrashort pulses has required bulky and expensive optical systems at the tabletop scale and has so far been beyond the reach of integrated photonics. Here, we break these limitations and demonstrate two-optical-cycle pulse compression using quadratic two-color soliton dynamics in lithium niobate nanophotonics. By leveraging dispersion engineering and operation near phase matching, we achieve extreme compression, energy-efficient operation, and strong conversion of pump to the second harmonic. We experimentally demonstrate generation of $\sim$13-fs pulses at 2 $μ$m using only $\sim$3 pJ of input energy. We further illustrate how the demonstrated scheme can be readily extended to on-chip single-cycle pulse synthesis with sub-cycle control. Our results provide a path towards realization of single-cycle ultrafast systems in nanophotonic circuits.

physics.optics↗

arXiv2025

Ultrafast neuromorphic computing with nanophotonic optical parametric oscillators

Over the past decade, artificial intelligence (AI) has led to disruptive advancements in fundamental sciences and everyday technologies. Among various machine learning algorithms, deep neural networks have become instrumental in revealing complex patterns in large datasets with key applications in computer vision, natural language processing, and predictive analytics. On-chip photonic neural networks offer a promising platform that leverage high bandwidths and low propagation losses associated with optical signals to perform analog computations for deep learning. However, nanophotonic circuits are yet to achieve the required linear and nonlinear operations simultaneously in an all-optical and ultrafast fashion. Here, we report an ultrafast nanophotonic neuromorphic processor using an optical parametric oscillator (OPO) fabricated on thin-film lithium niobate (TFLN). The input data is used to modulate the optical pulses synchronously pumping the OPO. The consequent signal pulses generated by the OPO are coupled to one another via the nonlinear delayed dynamics of the OPO, thus forming the internal nodes of a deep recurrent neural network. We use such a nonlinearly coupled OPO network for chaotic time series prediction, nonlinear error correction in a noisy communication channel, as well as noisy waveform classification and achieve accuracies exceeding 93% at an operating clock rate of ~ 10 GHz. Our OPO network is capable of achieving sub-nanosecond latencies, a timescale comparable to a single clock cycle in state-of-the-art digital electronic processors. By circumventing the need for optical-electronic-optical (OEO) conversions, our ultrafast nanophotonic neural network paves the way for the next generation of compact all-optical neuromorphic processors with ultralow latencies and high energy efficiencies.

physics.optics↗

arXiv2025

Energy-Efficient Ultrashort-Pulse Characterization using Nanophotonic Parametric Amplification

The growth of ultrafast nanophotonic circuits necessitates the development of energy-efficient on-chip pulse characterization techniques. Nanophotonic realizations of Frequency Resolved Optical Gating, a common pulse characterization technique in bulk optics, have been challenging due to their non-collinear nature and the lack of efficient nonlinear optical processes in the integrated platform. Here, we experimentally demonstrate a novel FROG-based technique compatible with the nanophotonic platform that leverages the high gain-bandwidth of a dispersion-engineered degenerate optical parametric amplifier for energy-efficient ultrashort pulse characterization. We demonstrate on-chip pulse characterization of sub-80-fs, ~1-fJ pulses using just ~60-fJ of gate pulse energy, which is several orders of magnitude lower than the gate pulse energy required for characterizing similar pulses in the bulk counterpart. In the future, we anticipate our work will enable the characterization of ultraweak-ultrashort pulses with energies at the single photon level.

physics.optics↗

arXiv2024

Ultrafast single-photon detection using nanophotonic parametric amplifiers

Integrated photonic quantum information processing (QIP) has advanced rapidly due to progress in various nanophotonic platforms. Single photon detectors have been the subject of intense study due to their ubiquity in QIP systems, yet many state-of-the art detectors operate at cryogenic temperatures under vacuum and suffer from long dead times. We propose and demonstrate a single photon detection scheme based on optical parametric amplification in nanophotonic lithium niobate (LN) combined with a classical photodetector. We use quantum detector tomography and experimentally demonstrate an efficiency of 26.5% with a 2.2% dark count rate. We show that by improving the nonlinearity-to-loss ratio in nanophotonics and using homodyne detection on a squeezed pump, the detector can achieve 69% efficiency with 0.9% dark count rate. The detector operates at room temperature, has no intrinsic dead time, and is readily integrated in LN nanophotonics, in which many other components of photonic QIP are available. Our results represent a step towards all-optical ultrafast photon detection for scalable nanophotonic QIP.

physics.optics↗

arXiv2024

Isotropic atomic layer etching of MgO-doped lithium niobate using sequential exposures of H$_2$ and SF$_6$ plasmas

Lithium niobate (LiNbO$_3$, LN) is a ferroelectric crystal of interest for integrated photonics owing to its large second-order optical nonlinearity and the ability to impart periodic poling via an external electric field. However, on-chip device performance based on thin-film lithium niobate (TFLN) is presently limited by propagation losses arising from surface roughness and corrugations. Atomic layer etching (ALE) could potentially smooth these features and thereby increase photonic performance, but no ALE process has been reported for LN. Here, we report an isotropic ALE process for $x$-cut MgO-doped LN using sequential exposures of H$_2$ and SF$_6$/Ar plasmas. We observe an etch rate of $1.59 \pm 0.02$ nm/cycle with a synergy of $96.9$%. We also demonstrate ALE can be achieved with SF$_6$/O$_2$ or Cl$_2$/BCl$_3$ plasma exposures in place of the SF$_6$/Ar plasma step with synergies of $99.5$% and $91.5$% respectively. The process is found to decrease the sidewall surface roughness of TFLN waveguides etched by physical Ar$^+$ milling by 30% without additional wet processing. Our ALE process could be used to smooth sidewall surfaces of TFLN waveguides as a post-processing treatment, thereby increasing the performance of TFLN nanophotonic devices and enabling new integrated photonic device capabilities.

cond-mat.mes-hall↗

arXiv2024

Ultra-Short Pulse Biphoton Source in Lithium Niobate Nanophotonics at 2$\textμ$m

Photonics offers unique capabilities for quantum information processing (QIP) such as room-temperature operation, the scalability of nanophotonics, and access to ultrabroad bandwidths and consequently ultrafast operation. Ultrashort-pulse sources of quantum states in nanophotonics are an important building block for achieving scalable ultrafast QIP, however, their demonstrations so far have been sparse. Here, we demonstrate a femtosecond biphoton source in dispersion-engineered periodically poled lithium niobate nanophotonics. We measure 17 THz of bandwidth for the source centered at 2.09 \textmu m, corresponding to a few optical cycles, with a brightness of 8.8 GHz/mW. Our results open new paths towards realization of ultrafast nanophotonic QIP.

physics.optics↗

arXiv2024

Large-scale time-multiplexed nanophotonic parametric oscillators

Arrays of nonlinear resonators offer a fertile ground for a wide range of complex phenomena and opportunities for advanced photonic sensing and computing. Recently, significant attention has focused on studying coupled resonators in special-purpose configurations either on chips or in table-top experiments. However, a path to realizing a large-scale programmable network of nonlinear photonic resonators remains elusive because of the challenges associated with simultaneously achieving strong nonlinearity, independent operation of the resonators, and programmability of the couplings. In this work, we break these barriers by realizing large-scale, time-multiplexed optical parametric oscillators (OPOs) on a single lithium niobate nanophotonic chip. We show independent operation of 70 identical OPOs in an ultrafast nanophotonic circuit. The OPOs exhibit an ultra-low threshold of a few picojoules, substantially surpassing the strength of nonlinearity of other platforms. Using our ultrafast nanophotonic circuit, a network of N OPOs with programmable all-to-all couplings requires only a few additional components. The time-multiplexed nanophotonic OPOs can enable myriad applications, including ultrafast classical and quantum information processing.

physics.optics↗

arXiv2023

Highly efficient visible and near-IR photon pair generation with thin-film lithium niobate

Efficient on-chip entangled photon pair generation at telecom wavelengths is an integral aspect of emerging quantum optical technologies, particularly for quantum communication and computing. However, moving to shorter wavelengths enables the use of more accessible silicon detector technology and opens up applications in imaging and spectroscopy. Here, we present high brightness ($(1.6 \pm 0.3) \times 10^{9}$ pairs/mW/nm) visible-near-IR photon pair generation in a periodically poled lithium niobate nanophotonic waveguide. The degenerate spectrum of the photon pairs is centered at 811 nm with a bandwidth of 117 nm. The measured on-chip source efficiency of $(2.3\pm 0.5) \times 10^{11}$ pairs/mW is on par with source efficiencies at telecom wavelengths and is also orders of magnitude higher than the efficiencies of other visible sources implemented in bulk crystal or diffused waveguide-based technologies. These results represent the shortest wavelength of photon pairs generated in a nanophotonic waveguide reported to date by nearly an octave.

physics.optics↗

arXiv2023

Multi-Octave Frequency Comb from an Ultra-Low-Threshold Nanophotonic Parametric Oscillator

Ultrabroadband frequency combs coherently unite distant portions of the electromagnetic spectrum. They underpin discoveries in ultrafast science and serve as the building blocks of modern photonic technologies. Despite tremendous progress in integrated sources of frequency combs, achieving multi-octave operation on chip has remained elusive mainly because of the energy demand of typical spectral broadening processes. Here we break this barrier and demonstrate multi-octave frequency comb generation using an optical parametric oscillator (OPO) in nanophotonic lithium niobate with only femtojoules of pump energy. The energy-efficient and robust coherent spectral broadening occurs far above the oscillation threshold of the OPO and detuned from its linear synchrony with the pump. We show that the OPO can undergo a temporal self-cleaning mechanism by transitioning from an incoherent operation regime, which is typical for operation far above threshold, to an ultrabroad coherent regime, corresponding to the nonlinear phase compensating the OPO cavity detuning. Such a temporal self-cleaning mechanism and the subsequent multi-octave coherent spectrum has not been explored in previous OPO designs and features a relaxed requirement for the quality factor and relatively narrow spectral coverage of the cavity. We achieve orders of magnitude reduction in the energy requirement compared to the other techniques, confirm the coherence of the comb, and present a path towards more efficient and wider spectral broadening. Our results pave the way for ultrashort-pulse and ultrabroadband on-chip nonlinear photonic systems for numerous applications.

physics.optics↗

arXiv2023

Mode-locked laser in nanophotonic lithium niobate

Mode-locked lasers (MLLs) have enabled ultrafast sciences and technologies by generating ultrashort pulses with peak powers substantially exceeding their average powers. Recently, tremendous efforts have been focused on realizing integrated MLLs not only to address the challenges associated with their size and power demand, but also to enable transforming the ultrafast technologies into nanophotonic chips, and ultimately to unlock their potential for a plethora of applications. However, till now the prospect of integrated MLLs driving ultrafast nanophotonic circuits has remained elusive because of their typically low peak powers, lack of controllability, and challenges with integration with appropriate nanophotonic platforms. Here, we overcome these limitations by demonstrating an electrically-pumped actively MLL in nanophotonic lithium niobate based on its hybrid integration with a III-V semiconductor optical amplifier. Our MLL generates $\sim$4.8 ps optical pulses around 1065 nm at a repetition rate of $\sim$10 GHz, with pulse energy exceeding 2.6 pJ and a high peak power beyond 0.5 W. We show that both the repetition rate and the carrier-envelope-offset of the resulting frequency comb can be flexibly controlled in a wide range using the RF driving frequency and the pump current, paving the way for fully-stabilized on-chip frequency combs in nanophotonics. Our work marks an important step toward fully-integrated nonlinear and ultrafast photonic systems in nanophotonic lithium niobate.

physics.optics↗

arXiv2023

Visible to Ultraviolet Frequency Comb Generation in Lithium Niobate Nanophotonic Waveguides

The introduction of nonlinear nanophotonic devices to the field of optical frequency comb metrology has enabled new opportunities for low-power and chip-integrated clocks, high-precision frequency synthesis, and broad bandwidth spectroscopy. However, most of these advances remain constrained to the near-infrared region of the spectrum, which has restricted the integration of frequency combs with numerous quantum and atomic systems in the ultraviolet and visible. Here, we overcome this shortcoming with the introduction of multi-segment nanophotonic thin-film lithium niobate (LN) waveguides that combine engineered dispersion and chirped quasi-phase matching for efficient supercontinuum generation via the combination of $χ^{(2)}$ and $χ^{(3)}$ nonlinearities. With only 90 pJ of pulse energy at 1550 nm, we achieve gap-free frequency comb coverage spanning 330 to 2400 nm. The conversion efficiency from the near-infrared pump to the UV-Visible region of 350-550 nm is nearly 20%. Harmonic generation via the $χ^{(2)}$ nonlinearity in the same waveguide directly yields the carrier-envelope offset frequency and a means to verify the comb coherence at wavelengths as short as 350 nm. Our results provide an integrated photonics approach to create visible and UV frequency combs that will impact precision spectroscopy, quantum information processing, and optical clock applications in this important spectral window.

physics.optics↗

arXiv2023

Tunable and efficient ultraviolet generation in nanophotonic lithium niobate

On-chip ultraviolet sources are of great interest for building compact and scalable atomic clocks, quantum computers, and spectrometers; however, few material platforms are suitable for integrated ultraviolet light generation. Of these materials, thin-film lithium niobate is the most competitive due to its ability to be quasi-phase-matched, optical confinement, and nonlinear properties. Here, we present efficient (197 $\pm$ 5 %/W/cm$^{2}$) second harmonic generation of UV-A light in a periodically poled lithium niobate nanophotonic waveguide. We achieve on-chip ultraviolet powers of 30 $μ$W, demonstrating the potential for compact frequency-doubling of common near-IR laser diodes. By using a large cross section waveguide (600 nm film thickness), we achieve insensitivity to fabrication errors, and can attain first-order quasi-phase-matching with relatively long poling periods (>1.5 $μ$m). The device also demonstrates linear wavelength tunability using temperature. By varying the poling period, we have achieved the shortest reported wavelength (355 nm) generated through frequency doubling in thin-film lithium niobate. Our results open up new avenues to realize ultraviolet on-chip sources and chip-scale photonics.

physics.optics↗