arXiv subjects

Ryuki Hyodo

Publications and source records attributed to Ryuki Hyodo.

At least 37 records · Page 2Linked to original sources

arXiv2021

Planetesimal formation around the snow line. II. Dust or pebbles?

Around the snow line, icy pebbles and silicate dust may locally pile-up and form icy and rocky planetesimals via streaming instability and/or gravitational instability. We perform 1D diffusion-advection simulations that include the back-reaction to radial drift and diffusion of icy pebbles and silicate dust, ice sublimation, release of silicate dust, and their recycling through recondensation and sticking onto pebbles outside the snow line. We use a realistic description of the scale height of silicate dust obtained from Ida et al. and that of pebbles including the effects of a Kelvin-Helmholtz instability. We study the dependence of solid pile-up on distinct effective viscous parameters for turbulent diffusions in the radial and vertical directions ($α_{\rm Dr}$ and $α_{\rm Dz}$) and for the gas accretion to the star ($α_{\rm acc}$) as well as that on the pebble-to-gas mass flux ($F_{\rm p/g}$). We derive the sublimation width of drifting icy pebbles which is a critical parameter to characterize the pile-up of silicate dust and pebbles around the snow line. We identify a parameter space (in the $F_{\rm p/g}-α_{\rm acc}-α_{\rm Dz}(=α_{\rm Dr})$ space) where pebbles no longer drift inward to reach the snow line due to the back-reaction that slows down radial velocity of pebbles. We show that the pile-up of solids around the snow line occurs in a broader range of parameters for $α_{\rm acc}=10^{-3}$ than for $α_{\rm acc}=10^{-2}$. Above a critical $F_{\rm p/g}$ value, the runaway pile-up of silicate dust inside the snow line is favored for $α_{\rm Dr}/α_{\rm acc} \ll 1$, while that of pebbles outside the snow line is favored for $α_{\rm Dr}/α_{\rm acc} \sim 1$. Our results imply that a distinct evolutionary path could produce a diversity of outcomes in terms of planetesimal formation around the snow line.

astro-ph.EP↗

arXiv2021

A "no-drift" runaway pile-up of pebbles in protoplanetary disks in which midplane turbulence increases with radius

A notable challenge of planet formation is to find a path to directly form planetesimals from small particles. We aim to understand how drifting pebbles pile up in a protoplanetary disk with a non-uniform turbulence structure. We consider a disk structure in which the midplane turbulence viscosity is increasing with radius in protoplanetary disks as in the outer region of a dead zone. We perform 1D diffusion-advection simulations of pebbles that include back-reaction (the inertia) to radial drift and vertical/radial diffusion of pebbles for a given pebble-to-gas mass flux. We report a new mechanism, the "no-drift" runaway pile-up, leading to a runaway accumulation of pebbles in disks, thus favoring the formation of planetesimals by streaming and/or gravitational instabilities. This occurs when pebbles drifting in from the outer disk and entering a dead zone experience a decrease in vertical turbulence. The scale height of the pebble subdisk then decreases, and for small enough values of the turbulence in the dead zone and high values of the pebble to gas flux ratio, the back-reaction of pebbles on gas leads to a significant decrease in their drift velocity and thus their progressive accumulation. This occurs when the ratio of the flux of pebbles to that of the gas is large enough so that the effect dominates over any Kelvin-Helmholtz shear instability. This process is independent of the existence of a pressure bump.

astro-ph.EP↗

arXiv2020

Planetesimal formation around the snow line: I. Monte Carlo simulations of silicate dust pile-up in a turbulent disk

Context: The formation of rocky planetesimals is a long-standing problem in planet formation theory. One of the possibilities is that it results from gravitational instability as a result of pile-up of small silicate dust particles released from sublimating icy pebbles that pass the snow line. Aims: We want to understand and quantify the role of the water snow line for the formation of rock-rich and ice-rich planetesimals. In this paper, we focus on the formation of rock-rich planetesimals. A companion paper examines the combined formation of both rock-rich and ice-rich planetesimals. Methods: We develop a new Monte Carlo code to calculate the radial evolution of silicate particles in a turbulent accretion disk, accounting for the back-reaction (i.e., inertia) of the particles on their radial drift velocity and diffusion. Results depend in particular on the particle injection width (determined from the radial sublimation width of icy pebbles), the pebble scale height and the pebble mass flux through the disk. The scale height evolution of the silicate particles, which is the most important factor for the runaway pile-up, is automatically calculated in this Lagrange method. Results: From the numerical results, we derive semi-analytical relations for the scale height of the silicate dust particles and the particles-to-gas density ratio at the midplane, as functions of a pebble-to-gas mass flux ratio and the $α$ parameters for disk gas accretion and vertical/radial diffusion. We find that the runaway pile-up of the silicate particles (formation of rocky planetesimals) occurs if the pebble-to-gas mass flux ratio is $> [(α_{Dz}/α_{acc})/3 \times 10^{-2}]^{1/2}$ where $α_{Dz}$ and $α_{acc}$ are the $α$ parameters for vertical turbulent diffusion and disk gas accretion.

astro-ph.EP↗

arXiv2020

Modification of the composition and density of Mercury from late accretion

Late accretion is a process that strongly modulated surface geomorphic and geochemical features of Mercury. Yet, the fate of the impactors and their effects on Mercury's surface through the bombardment epoch are not clear. Using Monte-Carlo and analytical approaches of cratering impacts, we investigate the physical and thermodynamical outcomes of late accretion on Mercury. Considering the uncertainties in late accretion, we develop scaling laws for the following parameters as a function of impact velocity and total mass of late accretion: (1) depth of crustal erosion, (2) the degree of resurfacing, and (3) mass accreted from impactor material. Existing dynamical models indicate that Mercury experienced an intense impact bombardment (a total mass of $\sim 8 \times 10^{18} - 8 \times 10^{20}$ kg with a typical impact velocity of $30-40$ km s$^{-1}$) after $4.5$ Ga. With this, we find that late accretion could remove 50 m to 10 km of the early crust of Mercury, but the change to its core-to-mantle ratio is negligible. Alternatively, the mantles of putative differentiated planetesimals in the early solar system could be more easily removed and their respective core fraction increased, if Mercury ultimately accreted from such objects. Although the cratering is notable for erasing the older geological surface records on Mercury, we show that $\sim 40-50$ wt% of the impactor's exogenic materials, including the volatile-bearing materials, can be heterogeneously implanted on Mercury's surface as a late veneer ($>3\times 10^{18}-1.6 \times 10^{19}$ kg in total). About half of the accreted impactor's materials are vaporized, and the rest is completely melted upon the impact. We expect that the further interplay between our theoretical results and forthcoming surface observations of Mercury, including the BepiColombo mission, will lead us to a better understanding of Mercury's origin and evolution.

astro-ph.EP↗

arXiv2020

Escape and accretion by cratering impacts: Formulation of scaling relations for high-speed ejecta

Numerous small bodies inevitably lead to cratering impacts on large planetary bodies during planet formation and evolution. As a consequence of these small impacts, a fraction of the target material escapes from the gravity of the large body, and a fraction of the impactor material accretes onto the target surface, depending on the impact velocities and angles. Here, we study the mass of the high-speed ejecta that escapes from the target gravity by cratering impacts when material strength is neglected. We perform a large number of cratering impact simulations onto a planar rocky target using the smoothed particle hydrodynamics method. We show that the escape mass of the target material obtained from our numerical simulations agrees with the prediction of a scaling law under a point-source assumption when $v_{\rm imp} \gtrsim 12 v_{\rm esc}$, where $v_{\rm imp}$ is the impact velocity and $v_{\rm esc}$ is the escape velocity of the target. However, we find that the point-source scaling law overestimates the escape mass up to a factor of $\sim 70$, depending on the impact angle, when $v_{\rm imp} \lesssim 12 v_{\rm esc}$. Using data obtained from numerical simulations, we derive a new scaling law for the escape mass of the target material for $v_{\rm imp} \lesssim 12 v_{\rm esc}$. We also derive a scaling law that predicts the accretion mass of the impactor material onto the target surface upon cratering impacts by numerically evaluating the escape mass of the impactor material. Our newly derived scaling laws are useful for predicting the escape mass of the target material and the accretion mass of the impactor material for a variety of cratering impacts that would occur on large planetary bodies during planet formation.

astro-ph.EP↗

arXiv2019

Transport of impact ejecta from Mars to its moons as a means to reveal Martian history

Throughout the history of the solar system, Mars has experienced continuous asteroidal impacts. These impacts have produced impact-generated Mars ejecta, and a fraction of this debris is delivered to Earth as Martian meteorites. Another fraction of the ejecta is delivered to the moons of Mars, Phobos and Deimos. Here, we studied the amount and condition of recent delivery of impact ejecta from Mars to its moons. Using state-of-the-art numerical approaches, we report, for the first time, that materials delivered from Mars to its moons are physically and chemically different from the Martian meteorites, which are all igneous rocks with a limited range of ages. We show that Mars ejecta mixed in the regolith of its moons potentially covers all its geological eras and consists of all types of rocks, from sedimentary to igneous. A Martian moons sample-return mission will bring such materials back to Earth, and the samples will provide a wealth of "time-resolved" geochemical information about the evolution of Martian surface environments.

astro-ph.EP↗

arXiv2019

The formation of the Martian moons

Almost all the planets of our solar system have moons. Each planetary system has however unique characteristics. The Martian system has not one single big moon like the Earth, not tens of moons of various sizes like for the giant planets, but two small moons: Phobos and Deimos. How did form such a system? This question is still being investigated on the basis of the Earth-based and space-borne observations of the Martian moons and of the more modern theories proposed to account for the formation of other moon systems. The most recent scenario of formation of the Martian moons relies on a giant impact occurring at early Mars history and having also formed the so-called hemispheric crustal dichotomy. This scenario accounts for the current orbits of both moons unlike the scenario of capture of small size asteroids. It also predicts a composition of disk material as a mixture of Mars and impactor materials that is in agreement with remote sensing observations of both moon surfaces, which suggests a composition different from Mars. The composition of the Martian moons is however unclear, given the ambiguity on the interpretation of the remote sensing observations. The study of the formation of the Martian moon system has improved our understanding of moon formation of terrestrial planets: The giant collision scenario can have various outcomes and not only a big moon as for the Earth. This scenario finds a natural place in our current vision of the early solar system when conditions were favorable for giant collisions to occur. The next step in exploration of Martian moon is a sample return mission to test the giant collision scenario for their origin, and to provide tests of models of early solar system dynamics since Mars may retain material exchanged between the inner and outer solar system.

astro-ph.EP↗

arXiv2019

Assessment of the probability of microbial contamination for sample return from Martian moons I: Departure of microbes from Martian surface

Potential microbial contamination of Martian moons, Phobos and Deimos, which can be brought about by transportation of Mars ejecta produced by meteoroid impacts on the Martian surface, has been comprehensively assessed in a statistical approach, based on the most probable history of recent major gigantic meteoroid collisions on the Martian surface. This article is the first part of our study to assess potential microbial density in Mars ejecta departing from the Martian atmosphere, as a source of the second part where statistical analysis of microbial contamination probability is conducted. Potential microbial density on the Martian surface as the source of microorganisms was estimated by analogy to the terrestrial areas having the similar arid and cold environments, from which a probabilistic function was deduced as the asymptotic limit. Microbial survival rate during hypervelocity meteoroid collisions was estimated by numerical analysis of impact phenomena with and without taking internal friction and plastic deformation of the colliding meteoroid and the target ground into consideration. Trajectory calculations of departing ejecta through the Martian atmosphere were conducted with taking account of aerodynamic deceleration and heating by the aid of computational fluid dynamic analysis. It is found that Mars ejecta smaller than 0.03 m in diameter hardly reach the Phobos orbit due to aerodynamic deceleration, or mostly sterilized due to significant aerodynamic heating even though they can reach the Phobos orbit and beyond. Finally, the baseline dataset of microbial density in Mars ejecta departing for Martian moons has been presented for the second part of our study.

astro-ph.EP↗

arXiv2019

Assessment of the probability of microbial contamination for sample return from Martian moons II: The fate of microbes on Martian moons

This paper presents a case study of microbe transportation in the Mars-satellites system. We examined the spatial distribution of potential impact-transported microbes on the Martian moons using impact physics by following a companion study (Fujita et al.). We used sterilization data from the precede studies. We considered that the microbes came mainly from the Zunil crater on Mars. We found that 70-80% of the microbes are likely to be dispersed all over the moon surface and are rapidly sterilized due to radiation except for those microbes within a thick ejecta deposit produced by meteoroids. The other 20-30% might be shielded from radiation by thick regolith layers that formed at collapsed layers in craters produced by Mars rock impacts. The total number of potentially surviving microbes at the thick ejecta deposits is estimated to be 3-4 orders of magnitude lower than at the Mars rock craters. The microbe concentration is irregular in the horizontal direction and is largely depth-dependent due to the radiation sterilization. The surviving fraction of transported microbes would be only 1 ppm on Phobos and 100 ppm on Deimos, suggesting that the transport processes and radiation severely affect microbe survival. The microbe sampling probability from the Martian moons was also investigated. We suggest that sample return missions from the Martian moons are classified into Unrestricted Earth-Return missions for 30 g samples and 10 cm depth sampling, even in our conservative scenario. We also conducted a full statistical analysis for sampling the regolith of Phobos to include the effects of uncertainties in input parameters on the sampling probability. The most likely probability of microbial contamination for return samples is estimated to be two orders of magnitude lower than the criterion defined by the planetary protection policy of the Committee on Space Research (COSPAR).

astro-ph.EP↗

arXiv2019

Formation of rocky and icy planetesimals inside and outside the snow line: Effects of diffusion, sublimation and back-reaction

It is important to clarify where and when rocky and icy planetesimals are formed in a viscously evolving disk. We wish to understand how local runaway pile-up of solids occurs inside or outside the snow line. We assume an icy pebble contains micron-sized silicate grains that are uniformly mixed with ice and are released during the ice sublimation. Using a local one-dimensional code, we solve the radial drift and the turbulent diffusion of solids and the water vapor, taking account of their sublimation/condensation around the snow line. We systematically investigate effects of back-reactions of the solids to gas on the radial drift and diffusion of solids, scale height evolution of the released silicate particles, and possible difference in effective viscous parameters between that for turbulent diffusion ($α_{\rm tur}$) and that for the gas accretion rate onto the central star ($α_{\rm acc}$). We study the dependence on the ratio of the solid mass flux to the gas ($F_{\rm p/g}$). We show that the favorable locations for the pile-up of silicate grains and icy pebbles are the regions in the proximity of the water snow line inside and outside it, respectively. We found that runaway pile-ups occur when both the back-reactions for radial drift and diffusion are included. In the case with only the back-reaction for the radial drift, no runaway pile-up is found except for extremely high pebble flux, while the condition of streaming instability can be satisfied for relatively large $F_{\rm p/g}$ as found in the past literatures. If the back-reactions for radial diffusion is considered, the runaway pile-up occurs for reasonable value of pebble flux. The runaway pile-up of silicate grains that would lead to formation of rocky planetesimals occurs for $α_{\rm tur} \ll α_{\rm acc}$, while the runaway pile-up of icy pebbles is favored for $α_{\rm tur} \sim α_{\rm acc}$.

astro-ph.EP↗

arXiv2019

Early formation of moons around large trans-Neptunian objects via giant impacts

Recent studies have revealed that all large (over 1000 km in diameter) trans-Neptunian objects (TNOs) form satellite systems. Although the largest Plutonian satellite, Charon, is thought to be an intact fragment of an impactor directly formed via a giant impact, whether giant impacts can explain the variations in secondary-to-primary mass ratios and spin/orbital periods among all large TNOs remains to be determined. Here we systematically perform hydrodynamic simulations to investigate satellite formation via giant impacts. We find that the simulated secondary-to-primary mass ratio varies over a wide range, which overlaps with observed mass ratios. We also reveal that the satellite systems' current distribution of spin/orbital periods and small eccentricity can be explained only when their spins and orbits tidally evolve: initially as fluid-like bodies, but finally as rigid bodies. These results suggest that all satellites of large TNOs were formed via giant impacts in the early stage of solar system formation, before the outward migration of Neptune, and that they were fully or partially molten during the giant impact era.

astro-ph.EP↗

arXiv2018

On the Impact Origin of Phobos and Deimos IV: Volatile Depletion

Recent works have shown that Martian moons Phobos and Deimos may have accreted within a giant impact-generated disk whose composition is about an equal mixture of Martian material and impactor material. Just after the giant impact, the Martian surface is heated up to $\sim3000-6000$ K and the building blocks of moons, including volatile-rich vapor, are heated up to $\sim2000$ K. In this paper, we investigate the volatile loss from the building blocks of Phobos and Deimos by hydrodynamic escape of vapor and radiation pressure on condensed particles. We show that a non-negligible amount of volatiles ($> 10\%$ of the vapor with temperature $> 1000$ K via hydrodynamic escape, and moderately volatile dusts that condense at $\sim700-2000$ K via radiation pressure) could be removed just after the impact during their first signle orbit from their pericenters to apocenters. Our results indicate that bulk Phobos and Deimos are depleted in volatile elements. Together with future explorations such as JAXA's MMX (Martian Moons eXploration) mission, our results would be used to constrain the origin of Phobos and Deimos.

astro-ph.EP↗

arXiv2018

Rings in the Solar System: a short review

Rings are ubiquitous around giant planets in our Solar System. They evolve jointly with the nearby satellite system. They could form either during the giant planet formation process or much later, as a result of large scale dynamical instabilities either in the local satellite system, or at the planetary scale. We review here the main characteristics of rings in our solar system, and discuss their main evolution processes and possible origin. We also discuss the recent discovery of rings around small bodies.

astro-ph.EP↗

arXiv2018

Implantation of Martian materials in the inner solar system by a mega impact on Mars

Observations and meteorites indicate that the Martian materials are enigmatically distributed within the inner solar system. A mega impact on Mars creating a Martian hemispheric dichotomy and the Martian moons can potentially eject Martian materials. A recent work has shown that the mega-impact-induced debris is potentially captured as the Martian Trojans and implanted in the asteroid belt. However, the amount, distribution, and composition of the debris has not been studied. Here, using hydrodynamic simulations, we report that a large amount of debris ($\sim 1\%$ of Mars' mass), including Martian crust/mantle and the impactor's materials ($\sim 20:80$), are ejected by a dichotomy-forming impact, and distributed between $\sim 0.5-3.0$ astronomical units. Our result indicates that unmelted Martian mantle debris ($\sim 0.02\%$ of Mars' mass) can be the source of Martian Trojans, olivine-rich asteroids in the Hungarian region and the main asteroid belt, and some of which even hit early Earth. A mega impact can naturally implant Martian mantle materials within the inner solar system.

astro-ph.EP↗

arXiv2017

On the impact origin of Phobos and Deimos III: resulting composition from different impactors

The origin of Phobos and Deimos in a giant impact generated disk is gaining larger attention. Although this scenario has been the subject of many studies, an evaluation of the chemical composition of the Mars' moons in this framework is missing. The chemical composition of Phobos and Deimos is unconstrained. The large uncertainty about the origin of the mid-infrared features, the lack of absorption bands in the visible and near-infrared spectra, and the effects of secondary processes on the moons' surface make the determination of their composition very difficult from remote sensing data. Simulations suggest a formation of a disk made of gas and melt with their composition linked to the nature of the impactor and Mars. Using thermodynamic equilibrium we investigate the composition of dust (condensates from gas) and solids (from a cooling melt) that result from different types of Mars impactors (Mars-, CI-, CV-, EH-, comet-like). Our calculations show a wide range of possible chemical compositions and noticeable differences between dust and solids depending on the considered impactors. Assuming Phobos and Deimos as result of the accretion and mixing of dust and solids, we find that the derived assemblage (dust rich in metallic-iron, sulphides and/or carbon, and quenched solids rich in silicates) can be compatible with the observations. The JAXA's MMX (Martian Moons eXploration) mission will investigate the physical and chemical properties of the Maroons, especially sampling from Phobos, before returning to Earth. Our results could be then used to disentangle the origin and chemical composition of the pristine body that hit Mars and suggest guidelines for helping in the analysis of the returned samples.

astro-ph.EP↗

arXiv2017

On the Impact Origin of Phobos and Deimos II: True Polar Wander and Disk Evolution

Phobos and Deimos are the two small Martian moons, orbiting almost on the equatorial plane of Mars. Recent works have shown that they can accrete within an impact-generated inner dense and outer light disk, and that the same impact potentially forms the Borealis basin, a large northern hemisphere basin on the current Mars. However, there is no a priori reason for the impact to take place close to the north pole (Borealis present location) nor to generate a debris disk in the equatorial plane of Mars (in which Phobos and Deimos orbit). In this paper, we investigate these remaining issues on the giant impact origin of the Martian moons. First, we show that the mass deficit created by the Borealis impact basin induces a global reorientation of the planet to realign its main moment of inertia with the rotation pole (True Polar Wander). This moves the location of the Borealis basin toward its current location. Next, using analytical arguments, we investigate the detailed dynamical evolution of the eccentric inclined disk from the equatorial plane of Mars that is formed by the Martian-moon-forming impact. We find that, as a result of precession of disk particles due to the Martian dynamical flattening $J_{2}$ term of its gravity field and particle-particle inelastic collisions, eccentricity and inclination are damped and an inner dense and outer light equatorial circular disk is eventually formed. Our results strengthen the giant impact origin of Phobos and Deimos that can finally be tested by a future sample return mission such as JAXA's Martian Moons eXploration (MMX) mission.

astro-ph.EP↗

arXiv2017

On the Impact Origin of Phobos and Deimos I: Thermodynamic and Physical Aspects

Phobos and Deimos are the two small moons of Mars. Recent works have shown that they can accrete within an impact-generated disk. However, the detailed structure and initial thermodynamic properties of the disk are poorly understood. In this paper, we perform high-resolution SPH simulations of the Martian moon-forming giant impact that can also form the Borealis basin. This giant impact heats up the disk material (around $\sim 2000$ K in temperature) with an entropy increase of $\sim 1500$ J K$^{-1}$ kg$^{-1}$. Thus, the disk material should be mostly molten, though a tiny fraction of disk material ($< 5\%$) would even experience vaporization. Typically, a piece of molten disk material is estimated to be meter sized due to the fragmentation regulated by their shear velocity and surface tension during the impact process. The disk materials initially have highly eccentric orbits ($e \sim 0.6-0.9$) and successive collisions between meter-sized fragments at high impact velocity ($\sim 3-5$ km s$^{-1}$) can grind them down to $\sim100 μ$m-sized particles. On the other hand, a tiny amount of vaporized disk material condenses into $\sim 0.1 μ$m-sized grains. Thus, the building blocks of the Martian moons are expected to be a mixture of these different sized particles from meter-sized down to $\sim 100 μ$m-sized particles and $\sim 0.1 μ$m-sized grains. Our simulations also suggest that the building blocks of Phobos and Deimos contain both impactor and Martian materials (at least 35%), most of which come from the Martian mantle (50-150 km in depth; at least 50%). Our results will give useful information for planning a future sample return mission to Martian moons, such as JAXA's MMX (Martian Moons eXploration) mission.

astro-ph.EP↗

arXiv2017

Dynamical Evolution of the Debris Disk after a Satellite Catastrophic Disruption around Saturn

The hypothesis of a recent origin of Saturn's rings and its mid-sized moons is actively debated. It was suggested that a proto-Rhea and a proto-Dione might have collided recently, giving birth to the modern system of mid-sized moons. It is also suggested that the rapid viscous spreading of the debris may have implanted mass inside Saturn's Roche limit, giving birth to the modern Saturn's ring system. However, this scenario has been only investigated in very simplified way for the moment. This paper investigates it in detail to assess its plausibility by using $N$-body simulations and analytical arguments. When the debris disk is dominated by its largest remnant, $N$-body simulations show that the system quickly re-accrete into a single satellite without significant spreading. On the other hand, if the disk is composed of small particles, analytical arguments suggest that the disk experiences dynamical evolutions in three steps. The disk starts significantly excited after the impact and collisional damping dominates over the viscous spreading. After the system flattens, the system can become gravitationally unstable when particles are smaller than $\sim$ 100 m. However, the particles grow faster than spreading. Then, the system becomes gravitationally stable again and accretion continues at a slower pace, but spreading is inhibited. Therefore, the debris is expected to re-accrete into several large bodies. In conclusion, our results show that such a scenario may not form the today's ring system. In contrast, our results suggest that today's mid-sized moons are likely re-accreted from such a catastrophic event.

astro-ph.EP↗