arXiv subjects

Sándor P. Fekete

Publications and source records attributed to Sándor P. Fekete.

At least 73 records · Page 4Linked to original sources

arXiv2017

Collecting a Swarm in a Grid Environment Using Shared, Global Inputs

This paper investigates efficient techniques to collect and concentrate an under-actuated particle swarm despite obstacles. Concentrating a swarm of particles is of critical importance in health-care for targeted drug delivery, where micro-scale particles must be steered to a goal location. Individual particles must be small in order to navigate through micro-vasculature, but decreasing size brings new challenges. Individual particles are too small to contain on-board power or computation and are instead controlled by a global input, such as an applied fluidic flow or electric field. To make progress, this paper considers a swarm of robots initialized in a grid world in which each position is either free-space or obstacle. This paper provides algorithms that collect all the robots to one position and compares these algorithms on the basis of efficiency and implementation time.

cs.RO↗

arXiv2016

Connecting a Set of Circles with Minimum Sum of Radii

We consider the problem of assigning radii to a given set of points in the plane, such that the resulting set of circles is connected, and the sum of radii is minimized. We show that the problem is polynomially solvable if a connectivity tree is given. If the connectivity tree is unknown, the problem is NP-hard if there are upper bounds on the radii and open otherwise. We give approximation guarantees for a variety of polynomial-time algorithms, describe upper and lower bounds (which are matching in some of the cases), provide polynomial-time approximation schemes, and conclude with experimental results and open problems.

cs.CG↗

arXiv2016

Online Square-into-Square Packing

In 1967, Moon and Moser proved a tight bound on the critical density of squares in squares: any set of squares with a total area of at most 1/2 can be packed into a unit square, which is tight. The proof requires full knowledge of the set, as the algorithmic solution consists in sorting the objects by decreasing size, and packing them greedily into shelves. Since then, the online version of the problem has remained open; the best upper bound is still 1/2, while the currently best lower bound is 1/3, due to Han et al. (2008). In this paper, we present a new lower bound of 11/32, based on a dynamic shelf allocation scheme, which may be interesting in itself. We also give results for the closely related problem in which the size of the square container is not fixed, but must be dynamically increased in order to ac- commodate online sequences of objects. For this variant, we establish an upper bound of 3/7 for the critical density, and a lower bound of 1/8. When aiming for accommodating an online sequence of squares, this corresponds to a 2.82...- competitive method for minimizing the required container size, and a lower bound of 1.33 . . . for the achievable factor.

cs.DM↗

arXiv2016

New Geometric Algorithms for Fully Connected Staged Self-Assembly

We consider staged self-assembly systems, in which square-shaped tiles can be added to bins in several stages. Within these bins, the tiles may connect to each other, depending on the glue types of their edges. Previous work by Demaine et al. showed that a relatively small number of tile types suffices to produce arbitrary shapes in this model. However, these constructions were only based on a spanning tree of the geometric shape, so they did not produce full connectivity of the underlying grid graph in the case of shapes with holes; designing fully connected assemblies with a polylogarithmic number of stages was left as a major open problem. We resolve this challenge by presenting new systems for staged assembly that produce fully connected polyominoes in O(log^2 n) stages, for various scale factors and temperature τ = 2 as well as τ = 1. Our constructions work even for shapes with holes and uses only a constant number of glues and tiles. Moreover, the underlying approach is more geometric in nature, implying that it promised to be more feasible for shapes with compact geometric description.

cs.DS↗

arXiv2016

Geometric Hitting Set for Segments of Few Orientations

We study several natural instances of the geometric hitting set problem for input consisting of sets of line segments (and rays, lines) having a small number of distinct slopes. These problems model path monitoring (e.g., on road networks) using the fewest sensors (the "hitting points"). We give approximation algorithms for cases including (i) lines of 3 slopes in the plane, (ii) vertical lines and horizontal segments, (iii) pairs of horizontal/vertical segments. We give hardness and hardness of approximation results for these problems. We prove that the hitting set problem for vertical lines and horizontal rays is polynomially solvable.

cs.CG↗

arXiv2016

Computing Nonsimple Polygons of Minimum Perimeter

We provide exact and approximation methods for solving a geometric relaxation of the Traveling Salesman Problem (TSP) that occurs in curve reconstruction: for a given set of vertices in the plane, the problem Minimum Perimeter Polygon (MPP) asks for a (not necessarily simply connected) polygon with shortest possible boundary length. Even though the closely related problem of finding a minimum cycle cover is polynomially solvable by matching techniques, we prove how the topological structure of a polygon leads to NP-hardness of the MPP. On the positive side, we show how to achieve a constant-factor approximation. When trying to solve MPP instances to provable optimality by means of integer programming, an additional difficulty compared to the TSP is the fact that only a subset of subtour constraints is valid, depending not on combinatorics, but on geometry. We overcome this difficulty by establishing and exploiting additional geometric properties. This allows us to reliably solve a wide range of benchmark instances with up to 600 vertices within reasonable time on a standard machine. We also show that using a natural geometry-based sparsification yields results that are on average within 0.5% of the optimum.

cs.CG↗

arXiv2016

The Minimum Backlog Problem

We study the minimum backlog problem (MBP). This online problem arises, e.g., in the context of sensor networks. We focus on two main variants of MBP. The discrete MBP is a 2-person game played on a graph $G=(V,E)$. The player is initially located at a vertex of the graph. In each time step, the adversary pours a total of one unit of water into cups that are located on the vertices of the graph, arbitrarily distributing the water among the cups. The player then moves from her current vertex to an adjacent vertex and empties the cup at that vertex. The player's objective is to minimize the backlog, i.e., the maximum amount of water in any cup at any time. The geometric MBP is a continuous-time version of the MBP: the cups are points in the two-dimensional plane, the adversary pours water continuously at a constant rate, and the player moves in the plane with unit speed. Again, the player's objective is to minimize the backlog. We show that the competitive ratio of any algorithm for the MBP has a lower bound of $Ω(D)$, where $D$ is the diameter of the graph (for the discrete MBP) or the diameter of the point set (for the geometric MBP). Therefore we focus on determining a strategy for the player that guarantees a uniform upper bound on the absolute value of the backlog. For the absolute value of the backlog there is a trivial lower bound of $Ω(D)$, and the deamortization analysis of Dietz and Sleator gives an upper bound of $O(D\log N)$ for $N$ cups. Our main result is a tight upper bound for the geometric MBP: we show that there is a strategy for the player that guarantees a backlog of $O(D)$, independently of the number of cups.

cs.DS↗

arXiv2015

Improved Approximation Algorithms for Relay Placement

In the relay placement problem the input is a set of sensors and a number $r \ge 1$, the communication range of a relay. In the one-tier version of the problem the objective is to place a minimum number of relays so that between every pair of sensors there is a path through sensors and/or relays such that the consecutive vertices of the path are within distance $r$ if both vertices are relays and within distance 1 otherwise. The two-tier version adds the restrictions that the path must go through relays, and not through sensors. We present a 3.11-approximation algorithm for the one-tier version and a PTAS for the two-tier version. We also show that the one-tier version admits no PTAS, assuming P $\ne$ NP.

cs.DS↗

arXiv2015

Size-Dependent Tile Self-Assembly: Constant-Height Rectangles and Stability

We introduce a new model of algorithmic tile self-assembly called size-dependent assembly. In previous models, supertiles are stable when the total strength of the bonds between any two halves exceeds some constant temperature. In this model, this constant temperature requirement is replaced by an nondecreasing temperature function $τ: \mathbb{N} \rightarrow \mathbb{N}$ that depends on the size of the smaller of the two halves. This generalization allows supertiles to become unstable and break apart, and captures the increased forces that large structures may place on the bonds holding them together. We demonstrate the power of this model in two ways. First, we give fixed tile sets that assemble constant-height rectangles and squares of arbitrary input size given an appropriate temperature function. Second, we prove that deciding whether a supertile is stable is coNP-complete. Both results contrast with known results for fixed temperature.

cs.CG↗

arXiv2014

Facets for Art Gallery Problems

The Art Gallery Problem (AGP) asks for placing a minimum number of stationary guards in a polygonal region P, such that all points in P are guarded. The problem is known to be NP-hard, and its inherent continuous structure (with both the set of points that need to be guarded and the set of points that can be used for guarding being uncountably infinite) makes it difficult to apply a straightforward formulation as an Integer Linear Program. We use an iterative primal-dual relaxation approach for solving AGP instances to optimality. At each stage, a pair of LP relaxations for a finite candidate subset of primal covering and dual packing constraints and variables is considered; these correspond to possible guard positions and points that are to be guarded. Particularly useful are cutting planes for eliminating fractional solutions. We identify two classes of facets, based on Edge Cover and Set Cover (SC) inequalities. Solving the separation problem for the latter is NP-complete, but exploiting the underlying geometric structure, we show that large subclasses of fractional SC solutions cannot occur for the AGP. This allows us to separate the relevant subset of facets in polynomial time. We also characterize all facets for finite AGP relaxations with coefficients in {0, 1, 2}. Finally, we demonstrate the practical usefulness of our approach. Our cutting plane technique yields a significant improvement in terms of speed and solution quality due to considerably reduced integrality gaps as compared to the approach by Kröller et al.

cs.CG↗

arXiv2014

Universal Computation with Arbitrary Polyomino Tiles in Non-Cooperative Self-Assembly

In this paper we explore the power of geometry to overcome the limitations of non-cooperative self-assembly. We define a generalization of the abstract Tile Assembly Model (aTAM), such that a tile system consists of a collection of polyomino tiles, the Polyomino Tile Assembly Model (polyTAM), and investigate the computational powers of polyTAM systems at temperature 1, where attachment among tiles occurs without glue cooperation. Systems composed of the unit-square tiles of the aTAM at temperature 1 are believed to be incapable of Turing universal computation (while cooperative systems, with temperature > 1, are able). As our main result, we prove that for any polyomino $P$ of size 3 or greater, there exists a temperature-1 polyTAM system containing only shape-$P$ tiles that is computationally universal. Our proof leverages the geometric properties of these larger (relative to the aTAM) tiles and their abilities to effectively utilize geometric blocking of particular growth paths of assemblies, while allowing others to complete. To round out our main result, we provide strong evidence that size-1 (i.e. aTAM tiles) and size-2 polyomino systems are unlikely to be computationally universal by showing that such systems are incapable of geometric bit-reading, which is a technique common to all currently known temperature-1 computationally universal systems. We further show that larger polyominoes with a limited number of binding positions are unlikely to be computationally universal, as they are only as powerful as temperature-1 aTAM systems. Finally, we connect our work with other work on domino self-assembly to show that temperature-1 assembly with at least 2 distinct shapes, regardless of the shapes or their sizes, allows for universal computation.

cs.ET↗

arXiv2014

Covering Folded Shapes

Can folding a piece of paper flat make it larger? We explore whether a shape $S$ must be scaled to cover a flat-folded copy of itself. We consider both single folds and arbitrary folds (continuous piecewise isometries $S\rightarrow R^2$). The underlying problem is motivated by computational origami, and is related to other covering and fixturing problems, such as Lebesgue's universal cover problem and force closure grasps. In addition to considering special shapes (squares, equilateral triangles, polygons and disks), we give upper and lower bounds on scale factors for single folds of convex objects and arbitrary folds of simply connected objects.

cs.CG↗

arXiv2014

Complexity of the General Chromatic Art Gallery Problem

In the original Art Gallery Problem (AGP), one seeks the minimum number of guards required to cover a polygon $P$. We consider the Chromatic AGP (CAGP), where the guards are colored. As long as $P$ is completely covered, the number of guards does not matter, but guards with overlapping visibility regions must have different colors. This problem has applications in landmark-based mobile robot navigation: Guards are landmarks, which have to be distinguishable (hence the colors), and are used to encode motion primitives, \eg, "move towards the red landmark". Let $χ_G(P)$, the chromatic number of $P$, denote the minimum number of colors required to color any guard cover of $P$. We show that determining, whether $χ_G(P) \leq k$ is \NP-hard for all $k \geq 2$. Keeping the number of colors minimal is of great interest for robot navigation, because less types of landmarks lead to cheaper and more reliable recognition.

cs.CG↗

arXiv2014

Particle Computation: Designing Worlds to Control Robot Swarms with only Global Signals

Micro- and nanorobots are often controlled by global input signals, such as an electromagnetic or gravitational field. These fields move each robot maximally until it hits a stationary obstacle or another stationary robot. This paper investigates 2D motion-planning complexity for large swarms of simple mobile robots (such as bacteria, sensors, or smart building material). In previous work we proved it is NP-hard to decide whether a given initial configuration can be transformed into a desired target configuration; in this paper we prove a stronger result: the problem of finding an optimal control sequence is PSPACE-complete. On the positive side, we show we can build useful systems by designing obstacles. We present a reconfigurable hardware platform and demonstrate how to form arbitrary permutations and build a compact absolute encoder. We then take the same platform and use dual-rail logic to build a universal logic gate that concurrently evaluates AND, NAND, NOR and OR operations. Using many of these gates and appropriate interconnects we can evaluate any logical expression.

cs.RO↗

arXiv2014

Exploration via Structured Triangulation by a Multi-Robot System with Bearing-Only Low-Resolution Sensors

This paper presents a distributed approach for exploring and triangulating an unknown region using a multi- robot system. The objective is to produce a covering of an unknown workspace by a fixed number of robots such that the covered region is maximized, solving the Maximum Area Triangulation Problem (MATP). The resulting triangulation is a physical data structure that is a compact representation of the workspace; it contains distributed knowledge of each triangle, adjacent triangles, and the dual graph of the workspace. Algorithms can store information in this physical data structure, such as a routing table for robot navigation Our algorithm builds a triangulation in a closed environment, starting from a single location. It provides coverage with a breadth-first search pattern and completeness guarantees. We show the computational and communication requirements to build and maintain the triangulation and its dual graph are small. Finally, we present a physical navigation algorithm that uses the dual graph, and show that the resulting path lengths are within a constant factor of the shortest-path Euclidean distance. We validate our theoretical results with experiments on triangulating a region with a system of low-cost robots. Analysis of the resulting quality of the triangulation shows that most of the triangles are of high quality, and cover a large area. Implementation of the triangulation, dual graph, and navigation all use communication messages of fixed size, and are a practical solution for large populations of low-cost robots.

cs.RO↗

arXiv2013

Reallocation Problems in Scheduling

In traditional on-line problems, such as scheduling, requests arrive over time, demanding available resources. As each request arrives, some resources may have to be irrevocably committed to servicing that request. In many situations, however, it may be possible or even necessary to reallocate previously allocated resources in order to satisfy a new request. This reallocation has a cost. This paper shows how to service the requests while minimizing the reallocation cost. We focus on the classic problem of scheduling jobs on a multiprocessor system. Each unit-size job has a time window in which it can be executed. Jobs are dynamically added and removed from the system. We provide an algorithm that maintains a valid schedule, as long as a sufficiently feasible schedule exists. The algorithm reschedules only a total number of O(min{log^* n, log^* Delta}) jobs for each job that is inserted or deleted from the system, where n is the number of active jobs and Delta is the size of the largest window.

cs.DS↗

arXiv2013

A Competitive Strategy for Distance-Aware Online Shape Allocation

We consider the following online allocation problem: Given a unit square S, and a sequence of numbers n_i between 0 and 1, with partial sum bounded by 1; at each step i, select a region C_i of previously unassigned area n_i in S. The objective is to make these regions compact in a distance-aware sense: minimize the maximum (normalized) average Manhattan distance between points from the same set C_i. Related location problems have received a considerable amount of attention; in particular, the problem of determining the "optimal shape of a city", i.e., allocating a single n_i has been studied. We present an online strategy, based on an analysis of space-filling curves; for continuous shapes, we prove a factor of 1.8092, and 1.7848 for discrete point sets.

cs.DS↗

arXiv2012

One Tile to Rule Them All: Simulating Any Turing Machine, Tile Assembly System, or Tiling System with a Single Puzzle Piece

In this paper we explore the power of tile self-assembly models that extend the well-studied abstract Tile Assembly Model (aTAM) by permitting tiles of shapes beyond unit squares. Our main result shows the surprising fact that any aTAM system, consisting of many different tile types, can be simulated by a single tile type of a general shape. As a consequence, we obtain a single universal tile type of a single (constant-size) shape that serves as a "universal tile machine": the single universal tile type can simulate any desired aTAM system when given a single seed assembly that encodes the desired aTAM system. We also show how to adapt this result to convert any of a variety of plane tiling systems (such as Wang tiles) into a "nearly" plane tiling system with a single tile (but with small gaps between the tiles). All of these results rely on the ability to both rotate and translate tiles; by contrast, we show that a single nonrotatable tile, of arbitrary shape, can produce assemblies which either grow infinitely or cannot grow at all, implying drastically limited computational power. On the positive side, we show how to simulate arbitrary cellular automata for a limited number of steps using a single nonrotatable tile and a linear-size seed assembly.

cs.DS↗