Searcharxiv⌕ Search

arXiv subjects

Sébastien Guenneau

Publications and source records attributed to Sébastien Guenneau.

At least 19 recordsLinked to original sources

High-frequency spectral asymptotics and homogenization for quasiperiodic operators

We study the spectral asymptotics of elliptic operators with quasiperiodic coefficients by exploiting projections from higher-dimensional periodic functions. Using the framework of two-scale convergence adapted to cut-and-project quasiperiodic structures we establish that, in the low-frequency (homogenization) regime, the spectrum converges to that of a homogenized operator with effective coefficients determined by a cell problem on the higher-dimensional torus. In the high-frequency regime, we introduce a rescaling approach that transforms the problem to an expanding domain with asymptotically frozen coefficients. In the critical scaling, the rescaled spectrum converges to the union of the Bloch spectra arising from the quasiperiodic bulk and a boundary layer spectrum consisting of eigenfunctions concentrated near the boundary of the macroscopic domain. This boundary spectrum can be characterised as a subset of the spectrum of a family of half-space operators with frozen macroscopic coefficients. For any non-critical scaling, the rescaled spectrum fills the positive real line.

math.AP↗

Waves within a network of slowly time-modulated interfaces: time-dependent effective properties, reciprocity and high-order dispersion

We consider wave propagation through a 1D periodic network of slowly time-modulated interfaces. Each interface is modelled by time-dependent spring-mass jump conditions, where mass and rigidity interface parameters are modulated in time. Low-frequency homogenisation yields a leading-order model described by an effective time-dependent wave equation, i.e.\ a wave equation with effective mass density and Young's modulus which are homogeneous in space but depend on time. This means that time-dependent bulk effective properties can be created by an array where only interfaces are modulated in time. The occurrence of k-gaps in case of a periodic modulation is also analysed. Second-order homogenisation is then performed and leads to an effective model which is reciprocal but encapsulates higher-order dispersive effects. These findings and the limitations of the models are illustrated through time-domain simulations.

math-ph↗

Fabry-Pérot quasinormal modes for topological edge states

Topological waveguides supporting quantum valley Hall interfacial states confine waves to interfaces and, due to topological protection, are resistant to backscattering even in the presence of defects. These topological insulators are typically studied by means of an infinite spectral problem. However, practical implementations are necessarily finite. In this work, we propose an alternative framework for analysing topologically non-trivial states in open, finite systems. Our approach is based on a Quasinormal Modal Expansion Method (QMEM), which directly characterizes the existence and excitation of these modes within the open system. The resulting spectrum is complex and discrete and fully describes the topologically non-trivial states, revealing an analogy of topological mode steering as a dispersive Fabry-Pérot cavity, with a dispersion relation closely related to that of the corresponding infinite (Floquet-Bloch) ribbon problem. Our results illustrate how topologically protected waveguiding can be understood in terms of leaky cavity modes and offers a powerful framework for analysing finite topological devices.

physics.app-ph↗

Scattering of transient waves by an interface with time-modulated jump conditions

Time modulation of the physical parameters offers interesting new possibilities for wave control. Examples include amplification of waves, harmonic generation and non-reciprocity, without resorting to non-linear mechanisms. Most of the recent studies focus on the time-modulation of the bulk physical properties. However, as the temporal modulation of these properties is difficult to achieve experimentally, we will concentrate here on the special case of an interface with time-varying jump conditions, which is simpler to implement. This work is focused on wave propagation in a one-dimensional medium containing one modulated interface. Properties of the scattered waves are investigated theoretically: energy balance, generation of harmonics, impedance matching and non-reciprocity. A fourth-order numerical method is also developed to simulate transient scattering. Numerical experiments are conducted to validate the numerical scheme and to illustrate the theoretical findings.

math-ph↗

Clay metaBrick-based motif to enhance thermal and acoustic insulation

Acoustic metamaterials have gained popularity as promising materials for enhancing noise reduction. Here, we explore the use of metamaterials, based on Helmholtz resonators (HRs), to enhance the performance of standard clay hollow brick. By incorporating HRs in the upper and lower hollows, we transform the standard brick into metaBrick, which is essentially designed based on metamaterial principles. We evaluate the acoustic and thermal performance of walls constructed with clay metaBricks, focusing on sound transmission loss and heat resistance. Both the finite element method and experimental analysis were employed to highlight the performance of metaBricks compared to standard clay bricks. Results show that metaBricks significantly enhance acoustic and thermal insulation, achieving an attenuation of $20$ \si{dB} across a broad frequency range from $500$ to $2500$ \si{Hz} and an $8$\% increase in thermal resistance. However, compressive strength is reduced by $33$\%, though it remains above the standard requirements for building materials. These findings indicate that metaBrick is a promising building material, offering improved sound and thermal insulation.

cond-mat.mtrl-sci↗

Controlling the Propagation of Flexural Elastic Waves With Ceramic Metatiles

In this work, we examine the application of phononic metamaterials for elastic impact noise insulation in tiled flooring, through the development of an innovative ceramic metatile that incorporates phononic crystals with optimized joint configurations. First, we optimize the geometrical and material parameters of the proposed metatile, which is composed of small ceramic subtiles connected by silicon joints, in order to reduce longitudinal and flexural wave propagation on tiled floors, which are responsible for noise vibrations in tiled environments. A bandgap is achieved that effectively suppresses the transmission of impact noise through the periodic structural configuration. For flexural waves, the ceramic metatile exhibits a pronounced attenuation of wave transmission in the range of $500$-$1900$ Hz along the $[100]$ direction, and $500$-$1400$ Hz along the $[110]$ direction. For longitudinal waves, a broad bandgap is observed, spanning from $400$ Hz to $1950$ Hz in both the $[100]$ and $[110]$ directions. Additionally, the bandgaps shift toward lower frequencies with increasing width of the subtiles and silicon joints, or with a decrease in the Young's modulus of the silicon. In both experimental and numerical tests, it is demonstrated that the integration of silicon joints inside the ceramic metatile improves the acoustic insulation performance, as measured by the reduction of impact noise levels across a wide range of low frequencies. The findings highlight the potential of metamaterials in architectural acoustics, offering innovative solutions for elastic wave control in tiled environments.

physics.app-ph↗

On the Practicability of Ceramic-Tiled Walls for Sound Absorption by Tuning Cavities

We present the practicality of structuring ceramic tiles for enhancing sound absorption on rigid walls. The cornerstone of our methodology is to structure walls with cavities so that walls effectively behave as heterogeneous absorbing surfaces over a large frequency bandwidth. Using this approach, ceramic tiled walls are developed by integrating tuned cavity structures based on Helmholtz resonators. Such a design leverages the empty joints between tiles to form resonator necks, while the space between the ceramic tiles and the wall acts as the resonator chambers. By arranging these resonators in a spatially graded array, we achieve broadband sound absorption which targets low-frequency noise generated by impacts, footsteps and ambient sources. This makes the system highly suitable for practical architectural applications. The study encompasses the entire process, from numerical modeling and analytical formulation to the fabrication and mounting of resonant tiles, followed by experimental validation, clearly demonstrating the effectiveness of the proposed solution in real-world conditions. The findings highlight the strong potential of this approach for practical tiled room acoustic treatment and noise mitigation.

physics.app-ph↗

Propagation and non-reciprocity in time-modulated diffusion through the lens of high-order homogenization

The homogenization procedure developed here is conducted on a laminate with periodic space-time modulation on the fine scale: at leading order, this modulation creates convection in the low-wavelength regime if both parameters are modulated. However, if only one parameter is modulated, which is more realistic, this convective term disappears and one recovers a standard diffusion equation with effective homogeneous parameters; this does not describe the non-reciprocity and the propagation of the field observed from exact dispersion diagrams. This inconsistency is corrected here by considering second-order homogenization which results in a non-reciprocal propagation term that is proved to be non-zero for any laminate and verified via numerical simulation. The same methodology is also applied to the case when the density is modulated in the heat equation, leading therefore to a corrective advective term which cancels out non-reciprocity at the leading order but not at the second order.

math.AP↗

Platonic quasi-normal modes expansion

Elastic wave manipulation using large arrays of resonators is driving the need for advanced simulation and optimization methods. To address this we introduce and explore a robust framework for wave control: Quasi-normal modes (QNMs). Specifically we consider the problem for thin elastic plates, where the Green's function formalism is well known and readily exploited to solve multiple scattering problems. By studying the associated nonlinear eigenvalue problem we derive a dispersive QNM expansion, providing a reduced-order model for efficient forced response computations which reveals physical insight into the resonant mode excitation. Furthermore, we derive eigenvalue sensitivities with respect to resonator parameters and apply a gradient-based optimization to design quasi-bound states in the continuum and position eigenfrequencies precisely in the complex plane. Scattering simulations validate our approach in structures such as graded line arrays and quasi-crystals. Drawing on QNM concepts from electromagnetism we demonstrate significant advances in elastic metamaterials, highlighting their potential for tailored wave manipulation.

cond-mat.mtrl-sci↗

Isospectral open cavities and gratings

Open cavities are often an essential component in the design of ultra-thin subwavelength metasurfaces and a typical requirement is that cavities have precise, often low frequency, resonances whilst simultaneously being physically compact. To aid this design challenge we develop a methodology to allow isospectral twinning of reference cavities with either smaller or larger ones, enforcing their spectra to coincide so that open resonators are identical in terms of their complex eigenfrequencies. For open systems the spectrum is not purely discrete and real, and we pay special attention to the accurate twinning of leaky modes associated with complex valued eigenfrequencies with an imaginary part orders of magnitude lower than the real part. We further consider twinning of 2D gratings, and model these with Floquet-Bloch conditions along one direction and perfectly matched layers in the other one; complex eigenfrequencies of special interest are located in the vicinity of the positive real line and further depend upon the Bloch wavenumber. The isospectral behaviour is illustrated, and quantified, throughout by numerical simulation using finite element analysis.

physics.app-ph↗

High-order homogenisation of the time-modulated wave equation: non-reciprocity for a single varying parameter

Laminated media with material properties modulated in space and time in the form of travelling waves have long been known to exhibit non-reciprocity. However, when using the method of low frequency homogenisation, it was so far only possible to obtain non-reciprocal effective media when both material properties are modulated in time, in the form of a Willis-coupling (or bi-anisotropy in electromagnetism) model. If only one of the two properties is modulated in time, while the other is kept constant, it was thought impossible for the method of homogenisation to recover the expected non-reciprocity since this Willis-coupling coefficient then vanishes. Contrary to this belief, we show that effective media with a single time-modulated parameter are non-reciprocal, provided homogenization is pushed to the second order. This is illustrated by numerical experiments (dispersion diagrams and time-domain simulations) for a bilayered modulated medium.

physics.class-ph↗

Bi-functional metamaterial based on Helmholtz resonators for sound and heat insulation

Over the last few decades, both heat and broadband sound reduction have become increasingly significant as a result of concerns about the environment and noise pollution. In order to address this challenge, we provide a finite element analysis study of an acoustic metamaterial panel consisting of a unit cell made of two Helmholtz Resonators with a guide in between. These panels can attenuate and control both sound propagation and heat flux. For noise pollution in a building, we first determine the geometric dimension that corresponds to the operative frequency range. Furthermore, we investigate the sound transmission loss of the proposed panel as a function of the periodicity of an array of unit cells. Additionally, we investigate the thermal flux induced by the panel, especially within a 24-hour period. The simulation results show that the proposed panel provides a level of sound attenuation within the frequency range of 400 Hz to 2.5 kHz, as well as interesting heat protection. The structure is compared to panels made up of a homogeneous medium and without Helmholtz resonators.

cond-mat.mtrl-sci↗

High-frequency homogenization for periodic dispersive media

High-frequency homogenization is used to study dispersive media, containing inclusions placed periodically, for which the properties of the material depend on the frequency (Lorentz or Drude model with damping, for example). Effective properties are obtained near a given point of the dispersion diagram in frequency-wavenumber space. The asymptotic approximations of the dispersion diagrams, and the wavefields, so obtained are then cross-validated via detailed comparison with finite element method simulations in both one and two dimensions.

physics.class-ph↗

Transformation twinning to create isospectral cavities

Bounded domains have discrete eigenfrequencies/spectra, and cavities with different boundaries and areas have different spectra. A general methodology for isospectral twinning, whereby the spectra of different cavities are made to coincide, is created by combining ideas from across physics including transformation optics, inverse problems and metamaterial cloaking. We twin a hexagonal drum with a deformed hexagonal drum using a non-singular coordinate transform that adjusts the deformed shape by mapping a near boundary domain to a zone of heterogeneous anisotropic medium. Splines define the mapping zone for twinning these two drums and we verify isospectrality by finite element analysis.

cond-mat.mtrl-sci↗

Electromagnetic cloak design with mono-objective and bi-objective optimizers: seeking the best tradeoff between protection and invisibility

We revisit the design of cloaks, without resorting to any geometric transform. Cancellation techniques and anomalous resonances have been applied for this purpose. Instead of a deductive reasoning, we propose a novel mono-objective optimization algorithm, namely a ternary grey wolf algorithm, and we adapt a bi-objective optimization algorithm. Firstly, the proposed chaotic ternary grey wolf algorithm searches three-valued spaces for all permittivity values in the cloak while minimizing the summation of a protection criterion and an invisibility criterion. Secondly, a bi-objective genetic algorithm is adapted to find pairs of optimal values of invisibility and protection.

physics.comp-ph↗

Subwavelength pulse focusing and perfect absorption in the Maxwell fisheye

Maxwell's fisheye is a paradigm for an absolute optical instrument with a refractive index deduced from the stereographic projection of a sphere on a plane. We investigate experimentally the dynamics of flexural waves in a thin plate with a thickness varying according to the Maxwell fisheye index profile and a clamped boundary. We demonstrate subwavelength focusing and temporal pulse compression at the image point. This is achieved by introducing a sink emitting a cancelling signal optimally shaped using a time-reversal procedure. Perfect absorption and outward going wave cancellation at the focus point are demonstrated. The time evolution of the kinetic energy stored inside the cavity reveals that the sink absorbs energy out of the plate ten times faster than the natural decay rate.

physics.class-ph↗

Polarization State Conversion through Chiral Butterfly Meta-Structure

The recent emergence of chirality in mechanical metamaterials has revolutionized the field, enabling achievements in wave propagation and polarization control. Despite being an intrinsic feature of some molecules and ubiquitous in our surroundings, the incorporation of chirality into mechanical systems has only gained widespread recognition in the last few years. The extra degrees of freedom induced by chirality has propelled the study of systems to new heights, leading to a better understanding of the physical laws governing these systems. In this study, we present a structural design of a butterfly meta-structure that exploits the chiral effect to create a 3D chiral butterfly capable of inducing a rotation of 90° in the plane of polarization, enabling a switch between various polarization states within a solid material. Furthermore, our numerical investigation using Finite Element Analysis (FEA) has revealed an unexpected conversion of compressional movement to transverse movement within these structures, further highlighting the transformative potential of chirality in mechanical metamaterials. Thus, revealing an additional degree of freedom that can be manipulated, namely the polarization state.

cond-mat.mes-hall↗

The emergence of low-frequency dual Fano resonances in chiral twisting metamaterials

In the current work, through a finite element analysis, we demonstrate that a configuration of chiral cells having syndiotactic symmetry provides dual Fano resonances at low frequency. From the phononic dispersion and transmission response, we compare the signature provided by a composite made of chiral cells to the ones of homogeneous medium, isotactic nonchiral, and isotactic chiral beams. The study results in an innovative design of a mechanical metamaterial that induces the Fano resonance at low frequency with a relatively high quality factor. This might be a significant step forward for mechanical wave filtering and detection. Performances have been evaluated using a sensor that will be implemented as a thermometer.

physics.app-ph↗