arXiv subjects

Sébastien Guenneau

Publications and source records attributed to Sébastien Guenneau.

51 records · Page 3Linked to original sources

arXiv2016

Control of Rayleigh-like waves in thick plate Willis metamaterials

We explore interactions of elastic waves propagating in plates (with soil parameters) structured with concrete pillars buried in the soil. Pillars are 2 m in diameter, 30 m in depth and the plate is 50 m in thickness. We study the frequency range 5 to 10 Hz, for which Rayleigh wave wavelengths are smaller than the plate thickness. This frequency range is compatible with frequency ranges of particular interest in earthquake engineering. It is demonstrated in this paper that two seismic cloaks' configurations allow for an unprecedented flow of elastodynamic energy associated with Rayleigh surface waves. The first cloak design is inspired by some approximation of ideal cloaks' parameters within the framework of thin plate theory. The second, more accomplished but more involved, cloak design is deduced from a geometric transform in the full Navier equations that preserves the symmetry of the elasticity tensor but leads to Willis' equations, well approximated by a homogenization procedure, as corroborated by numerical simulations. The two cloaks's designs are strikingly different, and the superior efficiency of the second type of cloak emphasizes the necessity for rigor in transposition of existing cloaks's designs in thin plates to the geophysics setting. Importantly, we focus our attention on geometric transforms applied to thick plates, which is an intermediate case between thin plates and semi-infinite media, not studied previously. Cloaking efficiency (reduction of the disturbance of the wave wavefront and its amplitude behind an obstacle) and protection (reduction of the wave amplitude within the center of the cloak) are studied for ideal and approximated cloaks' parameters. These results represent a preliminary step towards designs of seismic cloaks for surface Rayleigh waves propagating in sedimentary soils structured with concrete pillars.

physics.geo-ph↗

arXiv2016

Auxetic-like metamaterials as novel earthquake protections

We propose that wave propagation through a class of mechanical metamaterials opens unprecedented avenues in seismic wave protection based on spectral properties of auxetic-like metamaterials. The elastic parameters of these metamaterials like the bulk and shear moduli, the mass density, and even the Poisson ratio, can exhibit negative values in elastic stop bands. We show here that the propagation of seismic waves with frequencies ranging from 1Hz to 40Hz can be influenced by a decameter scale version of auxetic-like metamaterials buried in the soil, with the combined effects of impedance mismatch, local resonances and Bragg stop bands. More precisely, we numerically examine and illustrate the markedly different behaviors between the propagation of seismic waves through a homogeneous isotropic elastic medium (concrete) and an auxetic-like metamaterial plate consisting of 64 cells (40mx40mx40m), utilized here as a foundation of a building one would like to protect from seismic site effects. This novel class of seismic metamaterials opens band gaps at frequencies compatible with seismic waves when they are designed appropriately, what makes them interesting candidates for seismic isolation structures.

physics.class-ph↗

arXiv2016

Seismic waves damping with arrays of inertial resonators

We investigate the elastic stop band properties of a theoretical cubic array of iron spheres connected to a bulk of concrete via iron or rubber ligaments. Each sphere can move freely within a surrounding air cavity, but ligaments couple it to the bulk and further facilitate bending and rotational motions. Associated low frequency local resonances are well predicted by an asymptotic formula. We find complete stop bands (for all wave-polarizations) in the frequency range $[16,21]$ Hertz (resp. $[6,11]$ Hertz) for $7.4$-meter (resp. $0.74$-meter) diameter iron spheres with a $10$-meter (resp. $1$-meter) center-to-center spacing, when they are connected to concrete via steel (resp. rubber) ligaments. The scattering problem shows that only bending modes are responsible for damping and that rotational modes are totally overwritten by bending modes. Regarding seismic applications, we further consider soil as a bulk medium, in which case the relative bandwidth of the low frequency stop band can be enlarged through ligaments of different sizes that allow for well separated bending and rotational modes. We finally achieve some damping of elastodynamic waves from $8$ to $49$ Hertz (relative stop band of $143$ percent) for iron spheres $0.74$-meter in diameter that are connected to soil with six rubber ligaments of optimized shapes. These results represent a preliminary step in the design of seismic shields placed around, or underneath, the foundations of large civil infrastructures.

physics.class-ph↗

arXiv2015

Steering in-plane shear waves with inertial resonators in platonic crystals

Numerical simulations shed light on control of shear elastic wave propagation in plates structured with inertial resonators. The structural element is composed of a heavy core connected to the main freestanding plate through tiny ligaments. It is shown that such a configuration exhibits a complete band gap in the low frequency regime. As a byproduct, we further describe the asymmetric twisting vibration of a single scatterer via modal analysis, dispersion and transmission loss. This might pave the way to new functionalities such as focusing and self-collimation in elastic plates.

cond-mat.mtrl-sci↗

arXiv2015

Analogies between optical propagation and heat diffusion: Applications to micro-cavities, gratings and cloaks

A new analogy between optical propagation and heat diffusion in heterogeneous anisotropic media has been proposed recently [S. Guenneau, C. Amra, and D. Veynante, Optics Express Vol. 20, 8207-8218 (2012)]. A detailed derivation of this unconventional correspondence is presented and developed. In time harmonic regime, all thermal parameters are related to optical ones in artificial metallic media, thus making possible to use numerical codes developed for optics. Then the optical admittance formalism is extended to heat conduction in multilayered structures. The concepts of planar micro-cavities, diffraction gratings, and planar transformation optics for heat conduction are addressed. Results and limitations of the analogy are emphasized.

physics.optics↗

arXiv2014

Spectral efficiency of engineered thermal cloaks in the frequency regime

We analyse basic thermal cloaks designed via different geometric transforms applied to thermal cloaking. We evaluate quantitatively the efficiency of these heterogeneous anisotropic thermal cloaks through the calculation of the standard deviation of the isotherms. The study addresses the frequency regime and we point out the cloak's spectral efficiencies. We find that all these cloaks have comparable efficiency irrespective of whether or not they have singular conductivity at their inner boundary. However, approximate cloaking with multi-layered cloak critically depends upon the homogenization algorithm and a large number of thin layers (at least fifty) is required to reduce substantially the standard deviation of the isotherms.

cond-mat.mtrl-sci↗

arXiv2014

Morphing for faster computations in transformation optics

We propose to use morphing algorithms to deduce some approximate wave pictures of scattering by cylindrical invisibility cloaks of various shapes deduced from the exact computation (e.g. using a finite element method) of scattering by cloaks of two given shapes, say circular and elliptic ones, thereafter called the source and destination images. The error in L2 norm between the exact and approximate solutions deduced via morphing from the source and destination images is typically less than 1 percent if control points are judiciously chosen. Our approach works equally well for rotators and concentrators, and also unveils some device which we call rotacon since it both rotates and concentrates electromagnetic fields. However, our approach is shown to break down for superscatterers (i.e. when the geometric transform underpinning the metamaterial is non-monotonic): In this case, the error in L2 norm is about 25 percent. We stress that our approach might greatly accelerate numerical studies of 2D and 3D cloaks (e.g. it takes less than 1 minute to deduce 50 images from the exact computations of the source and destination images with any morphing algorithm in 2D). The only price to pay is a human intervention since the accuracy of morphing highly depends upon control points.

physics.comp-ph↗

arXiv2013

Moulding flexural waves in elastic plates lying atop a Faqir's bed of nails

Platonic crystals (PCs) are the elastic plate analogue of the photonic crystals widely used in optics, and are thin structured elastic plates along which flexural waves cannot propagate within certain stop band frequency intervals. The practical importance of PCs is twofold: these can be used either in the design of microstructured acoustic metamaterials or as an approximate model for surface elastic waves propagating in meter scale seismic metamaterials. Here, we make use of the band spectrum of PCs created with very small clamped holes, the nails of the title, to achieve surface wave reflectors at very large wavelengths, a flat lens, an endoscope, a directive antenna near stop band frequencies and cloaking from Dirac cones. The point pinned, Faqir, plate is particularly appealing as there is an exact dispersion relation available so the origin of these phenomena can be explained and interpreted using Fourier series and high frequency homogenization.

cond-mat.mtrl-sci↗

arXiv2013

Artificial magnetism and magnetoelectric coupling from dielectric layers

We investigate a high-order homogenization (HOH) algorithm for periodic multilayered stacks. The mathematical tool of choice is a transfer matrix method. Expressions for effective permeability, permittivity and magnetoelectric coupling are explored by frequency power expansions. On the physical side, this high-order homogenization uncovers a magnetoelectric coupling effect (odd order approximation) and artificial magnetism (even order approximation) in moderate contrast photonic crystals. Comparing the effective parameters' expressions of a stack with three layers against that of a stack with two layers, we note that the magnetoelectric coupling effect vanishes while the artificial magnetism can still be achieved in a center symmetric periodic structure. Furthermore, we numerically check the effective parameters through the dispersion law and transmission curves of a stack with two dielectric layers against that of an effective bianisotropic medium: they present a good agreement in the low frequency (acoustic) band until the first stop band, where the analyticity of the logarithm function of transfer matrix ($\log\{T\}$) breaks down.

cond-mat.mes-hall↗

arXiv2013

Seismic metamaterial: how to shake friends and influence waves?

Materials engineered at the micro- and nano-meter scale have had a tremendous and lasting impact in photonics and phononics, with applications ranging from periodic structures disallowing light and sound propagation at stop band frequencies, to subwavelength focussing and cloaking with metamaterials. Here, we present the description of a seismic test held on a soil structured at the meter scale using vibrocompaction probes. The most simplistic way to interact with a seismic wave is to modify the global properties of the medium, acting on the soil density and then on the wave velocity. The main concept is then to reduce the amplification of seismic waves at the free surface, called site effects in earthquake engineering. However, an alternative way to counteract the seismic signal is by modifying the distribution of seismic energy thanks to a metamaterial made of a grid of vertical, cylindrical and empty inclusions bored in the initial soil, in agreement with numerical simulations using an approximate plate model.

physics.geo-ph↗

arXiv2012

A route to all frequency homogenization of periodic structures

We start from a one-dimensional periodic multilayered stack in order to define a frequency power expansion of effective permittivity, permeability and bianisotropic parameters. It is shown from the first order that a simple dielectric multilayer can display a magnetoelectric coupling effect and, from the second order, that artificial magnetism can be obtained with arbitrary low contrast. However, this frequency power expansion is found to diverge at the first band gap edge. Thus, an alternative set of effective parameters, made of the propagation index and the surface impedance, is proposed. It is established that these effective parameters, as functions of the complex frequency, possess all the analytic properties required by the causality principle and passivity. Finally, we provide arguments to extend these results to the three-dimensional and frequency-dispersive case.

physics.optics↗

arXiv2011

Ultracompact optical circulator based on a uniformly magnetic magnetophotonic annular Bragg cavity

We propose a new class of compact integrated optical circulators providing a large isolation level while maintaining a straightforward technological feasibility. Their layout is based on a nonreciprocal radial Bragg cavity composed of concentric magneto-optical rings. The circulator ports are standard rib waveguides, butt-coupled to the cavity by cutting through its outer rings. The device is specifically designed for operation in a uniform external magnetic field. Using a coupled-mode description of the complete cavity/waveguide-port system, we explore the rich behaviour of cavity circulators in presence of varying levels of direct port-to-port coupling. We demonstrate numerically a strongly miniaturized two-dimensional cavity circulator, with a total footprint of less than $(10λ)^2$, achieving a 20-dB isolation level at telecom frequencies over a bandwidth of 130 GHz. The device is found to be very tolerant with respect to fabrication imperfections. We finish with an outlook on three-dimensional versions of the proposed nonreciprocal cavities.

physics.optics↗

arXiv2011

On a class of three-phase checkerboards with unusual effective properties

We examine the band spectrum, and associated Floquet-Bloch eigensolutions, arising in a class of three-phase periodic checkerboards. On a periodic cell $[-1,1[^2$, the refractive index is defined by $n^2= 1+ g_1(x_1)+g_2(x_2)$ with $g_i(x_i)= r^2\quad {\rm for} \quad 0\leq x_i<1, \hbox{and} g_i(x_i)= 0\quad {\rm for} \quad -1\leq x_i\leq 0$ where $r^2$ is constant. We find that for $r^2>-1$ the lowest frequency branch goes through origin with linear behaviour, which leads to effective properties encountered in most periodic structures. However, the case whereby $r^2=-1$ is very unusual, as the frequency $λ$ behaves like $\sqrt{k}$ near the origin, where $k$ is the wavenumber. Finally, when $r^2<-1$, the lowest branch does not pass through the origin and a zero-frequency band gap opens up. In the last two cases, effective medium theory breaks down even in the quasi-static limit, while the high-frequency homogenization [Craster et al., Proc. Roy. Soc. Lond. A 466, 2341-2362, 2010] neatly captures the detailed features of band diagrams.

physics.optics↗

arXiv2010

Hidden progress: broadband plasmonic invisibility

The key challenge in current research into electromagnetic cloaking is to achieve invisibility over an extended bandwidth. There has been significant progress towards this using the idea of cloaking by sweeping under the carpet of Li and Pendry, with dielectric structures superposed on a mirror. Here, we show that we can harness surface plasmon polaritons at a metal surface structured with a dielectric material to obtain a unique control of their propagation. We exploit this to control plasmonic coupling and demonstrate both theoretically and experimentally cloaking over an unprecedented bandwidth (650-900 nm). Our non-resonant plasmonic metamaterial allows a curved reflector to mimic a flat mirror. Our theoretical predictions are validated by experiments mapping the surface light intensity at the wavelength 800 nm.

physics.optics↗

arXiv2009

Revolution analysis of three-dimensional arbitrary cloaks

We extend the design of radially symmetric three-dimensional invisibility cloaks through transformation optics to cloaks with a surface of revolution. We derive the expression of the transformation matrix and show that one of its eigenvalues vanishes on the inner boundary of the cloaks, while the other two remain strictly positive and bounded. The validity of our approach is confirmed by finite edge-elements computations for a non-convex cloak of varying thickness.

physics.optics↗