arXiv subjects

Sören Schwertfeger

Publications and source records attributed to Sören Schwertfeger.

54 records · Page 3Linked to original sources

arXiv2019

Evaluation of Smartphone IMUs for Small Mobile Search and Rescue Robots

Small mobile robots are an important class of Search and Rescue Robots. Integrating all required components into such small robots is a difficult engineering task. Smartphones have already been made small, lightweight and cheap by the industry and are thus an excellent candidate as main controller for such robots. In this paper we outline how ROS can be used on Android devices and then evaluate one sensor which is very important for mobile robots: the Inertial Measurement Unit (IMU). Experiments are performed under static and dynamic conditions to measure the error of the IMUs of three smartphones and three professional IMUs. In the experiments we make use of a tracking system and an autonomous mobile robot.

cs.RO↗

arXiv2019

Room Detection for Topological Maps

Mapping is an important part of many robotic applications. In order to measure the performance of the mapping process we have to measure the quality of its result: the map. The map is essential for robotic algorithms like localization and path planning. Previously it was shown how matched Topology Graphs can be used for map evaluation by comparing the topology of the robot generated map to the topology of a ground truth map. In this paper we are extending the previous work by detecting open areas, for example rooms, in the 2D grid map and adding those to the topological representation. This way we can avoid the unreliable generation of paths in open areas, thus making the Topology Graph generation, and through that also the Topology Graph matching, more stable and robust. The detection applies the alpha shape algorithm for room detection.

cs.RO↗

arXiv2019

Comparison and Evaluation of 2D and 3D Range Sensors

For mobile robots range sensors are important to perceive the environment. Sensors that can measure in a 3D volume are especially significant for outdoor robotics, because this environment is often highly unstructured. The quality of the data gathered by those sensors influences all algorithms relying on it. In this paper thus the precision of several 2D and 2.5D sensors is measured at different ranges and different incidence angles. The results of all tests are presented and analyzed.

cs.RO↗

arXiv2019

Fast 2D Map Matching Based on Area Graphs

We present a novel area matching algorithm for merging two different 2D grid maps. There are many approaches to address this problem, nevertheless, most previous work is built on some assumptions, such as rigid transformation, or similar scale and modalities of two maps. In this work we propose a 2D map matching algorithm based on area segmentation. We transfer general 2D occupancy grid maps to an area graph representation, then compute the correct results by voting in that space. In the experiments, we compare with a state-of-the-art method applied to the matching of sensor maps with ground truth layout maps. The experiment shows that our algorithm has a better performance on large-scale maps and a faster computation speed.

cs.RO↗

arXiv2019

Fine-grained Qualitative Spatial Reasoning about Point Positions

The ability to persist in the spacial environment is, not only in the robotic context, an essential feature. Positional knowledge is one of the most important aspects of space and a number of methods to represent these information have been developed in the in the research area of spatial cognition. The basic qualitative spatial representation and reasoning techniques are presented in this thesis and several calculi are briefly reviewed. Features and applications of qualitative calculi are summarized. A new calculus for representing and reasoning about qualitative spatial orientation and distances is being designed. It supports an arbitrary level of granularity over ternary relations of points. Ways of improving the complexity of the composition are shown and an implementation of the calculus demonstrates its capabilities. Existing qualitative spatial calculi of positional information are compared to the new approach and possibilities for future research are outlined.

cs.AI↗

arXiv2019

Furniture Free Mapping using 3D Lidars

Mobile robots depend on maps for localization, planning, and other applications. In indoor scenarios, there is often lots of clutter present, such as chairs, tables, other furniture, or plants. While mapping this clutter is important for certain applications, for example navigation, maps that represent just the immobile parts of the environment, i.e. walls, are needed for other applications, like room segmentation or long-term localization. In literature, approaches can be found that use a complete point cloud to remove the furniture in the room and generate a furniture free map. In contrast, we propose a Simultaneous Localization And Mapping (SLAM)-based mobile laser scanning solution. The robot uses an orthogonal pair of Lidars. The horizontal scanner aims to estimate the robot position, whereas the vertical scanner generates the furniture free map. There are three steps in our method: point cloud rearrangement, wall plane detection and semantic labeling. In the experiment, we evaluate the efficiency of removing furniture in a typical indoor environment. We get $99.60\%$ precision in keeping the wall in the 3D result, which shows that our algorithm can remove most of the furniture in the environment. Furthermore, we introduce the application of 2D furniture free mapping for room segmentation.

cs.RO↗

arXiv2019

Improved Fourier Mellin Invariant for Robust Rotation Estimation with Omni-cameras

Spectral methods such as the improved Fourier Mellin Invariant (iFMI) transform have proved faster, more robust and accurate than feature based methods on image registration. However, iFMI is restricted to work only when the camera moves in 2D space and has not been applied on omni-cameras images so far. In this work, we extend the iFMI method and apply a motion model to estimate an omni-camera's pose when it moves in 3D space. This is particularly useful in field robotics applications to get a rapid and comprehensive view of unstructured environments, and to estimate robustly the robot pose. In the experiment section, we compared the extended iFMI method against ORB and AKAZE feature based approaches on three datasets showing different type of environments: office, lawn and urban scenery (MPI-omni dataset). The results show that our method boosts the accuracy of the robot pose estimation two to four times with respect to the feature registration techniques, while offering lower processing times. Furthermore, the iFMI approach presents the best performance against motion blur typically present in mobile robotics.

cs.RO↗

arXiv2019

Pose Estimation for Omni-directional Cameras using Sinusoid Fitting

We propose a novel pose estimation method for geometric vision of omni-directional cameras. On the basis of the regularity of the pixel movement after camera pose changes, we formulate and prove the sinusoidal relationship between pixels movement and camera motion. We use the improved Fourier-Mellin invariant (iFMI) algorithm to find the motion of pixels, which was shown to be more accurate and robust than the feature-based methods. While iFMI works only on pin-hole model images and estimates 4 parameters (x, y, yaw, scaling), our method works on panoramic images and estimates the full 6 DoF 3D transform, up to an unknown scale factor. For that we fit the motion of the pixels in the panoramic images, as determined by iFMI, to two sinusoidal functions. The offsets, amplitudes and phase-shifts of the two functions then represent the 3D rotation and translation of the camera between the two images. We perform experiments for 3D rotation, which show that our algorithm outperforms the feature-based methods in accuracy and robustness. We leave the more complex 3D translation experiments for future work.

cs.RO↗

arXiv2019

Area Graph: Generation of Topological Maps using the Voronoi Diagram

Representing a scanned map of the real environment as a topological structure is an important research topic in robotics. Since topological representations of maps save a huge amount of map storage space and online computing time, they are widely used in fields such as path planning, map matching, and semantic mapping. We use a topological map representation, the Area Graph, in which the vertices represent areas and edges represent passages. The Area Graph is developed from a pruned Voronoi Graph, the Topology Graph. We also employ a simple room detection algorithm to compensate the fact that the Voronoi Graph gets unstable in open areas. We claim that our area segmentation method is superior to state-of-the-art approaches in complex indoor environments and support this claim with a number of experiments.

cs.RO↗

arXiv2019

Towards Generation and Evaluation of Comprehensive Mapping Robot Datasets

This paper presents a fully hardware synchronized mapping robot with support for a hardware synchronized external tracking system, for super-precise timing and localization. We also employ a professional, static 3D scanner for ground truth map collection. Three datasets are generated to evaluate the performance of mapping algorithms within a room and between rooms. Based on these datasets we generate maps and trajectory data, which is then fed into evaluation algorithms. The mapping and evaluation procedures are made in a very easily reproducible manner for maximum comparability. In the end we can draw a couple of conclusions about the tested SLAM algorithms.

cs.RO↗

arXiv2019

Heterogeneous Multi-sensor Calibration based on Graph Optimization

Many robotics and mapping systems contain multiple sensors to perceive the environment. Extrinsic parameter calibration, the identification of the position and rotation transform between the frames of the different sensors, is critical to fuse data from different sensors. When obtaining multiple camera to camera, lidar to camera and lidar to lidar calibration results, inconsistencies are likely. We propose a graph-based method to refine the relative poses of the different sensors. We demonstrate our approach using our mapping robot platform, which features twelve sensors that are to be calibrated. The experimental results confirm that the proposed algorithm yields great performance.

cs.RO↗

arXiv2019

Adaptive Navigation Scheme for Optimal Deep-Sea Localization Using Multimodal Perception Cues

Underwater robot interventions require a high level of safety and reliability. A major challenge to address is a robust and accurate acquisition of localization estimates, as it is a prerequisite to enable more complex tasks, e.g. floating manipulation and mapping. State-of-the-art navigation in commercial operations, such as oil & gas production (OGP), rely on costly instrumentation. These can be partially replaced or assisted by visual navigation methods, especially in deep-sea scenarios where equipment deployment has high costs and risks. Our work presents a multimodal approach that adapts state-of-the-art methods from on-land robotics, i.e., dense point cloud generation in combination with plane representation and registration, to boost underwater localization performance. A two-stage navigation scheme is proposed that initially generates a coarse probabilistic map of the workspace, which is used to filter noise from computed point clouds and planes in the second stage. Furthermore, an adaptive decision-making approach is introduced that determines which perception cues to incorporate into the localization filter to optimize accuracy and computation performance. Our approach is investigated first in simulation and then validated with data from field trials in OGP monitoring and maintenance scenarios.

cs.RO↗

arXiv2019

Incrementally Building Topology Graphs via Distance Maps

Mapping is an essential task for mobile robots and topological representation often works as a basis for the various applications. In this paper, a novel framework that can build topological maps incrementally is proposed. The algorithm is using a distance map, and in our framework the topological map can grow as we append more sensor data to the map. To demonstrate our algorithm, we show the result of the distance map based method on several popular maps and run the incremental framework with raw sensor data to have a growing topological map, as an example of a robot exploring the environment.

cs.RO↗

arXiv2019

Depth Estimation on Underwater Omni-directional Images Using a Deep Neural Network

In this work, we exploit a depth estimation Fully Convolutional Residual Neural Network (FCRN) for in-air perspective images to estimate the depth of underwater perspective and omni-directional images. We train one conventional and one spherical FCRN for underwater perspective and omni-directional images, respectively. The spherical FCRN is derived from the perspective FCRN via a spherical longitude-latitude mapping. For that, the omni-directional camera is modeled as a sphere, while images captured by it are displayed in the longitude-latitude form. Due to the lack of underwater datasets, we synthesize images in both data-driven and theoretical ways, which are used in training and testing. Finally, experiments are conducted on these synthetic images and results are displayed in both qualitative and quantitative way. The comparison between ground truth and the estimated depth map indicates the effectiveness of our method.

cs.CV↗

arXiv2019

Configuration-Space Flipper Planning for Rescue Robots

For rescue robots, flipper endows the robot with additional ability to pass through various terrain. Autonomous motion becomes more important. In recent work autonomy is done by either planning with several special states or based on collected data. We are considering if it is possible to find a way to build continues states without collecting old trail data. In this paper, we first model the possible states as a global planning path with parameter configuration of the scene. Then, we follows the path to achieve the autonomous run. We plot the morphology of each path points to show the correctness of the path and implement a simple path following on real robot to demonstrate the performance of our algorithm.

cs.RO↗

arXiv2019

Learning Autonomous Exploration and Mapping with Semantic Vision

We address the problem of autonomous exploration and mapping for a mobile robot using visual inputs. Exploration and mapping is a well-known and key problem in robotics, the goal of which is to enable a robot to explore a new environment autonomously and create a map for future usage. Different to classical methods, we propose a learning-based approach this work based on semantic interpretation of visual scenes. Our method is based on a deep network consisting of three modules: semantic segmentation network, mapping using camera geometry and exploration action network. All modules are differentiable, so the whole pipeline is trained end-to-end based on actor-critic framework. Our network makes action decision step by step and generates the free space map simultaneously. To our best knowledge, this is the first algorithm that formulate exploration and mapping into learning framework. We validate our approach in simulated real world environments and demonstrate performance gains over competitive baseline approaches.

cs.RO↗

arXiv2018

Fast Gaussian Process Occupancy Maps

In this paper, we demonstrate our work on Gaussian Process Occupancy Mapping (GPOM). We concentrate on the inefficiency of the frame computation of the classical GPOM approaches. In robotics, most of the algorithms are required to run in real time. However, the high cost of computation makes the classical GPOM less useful. In this paper we dont try to optimize the Gaussian Process itself, instead, we focus on the application. By analyzing the time cost of each step of the algorithm, we find a way that to reduce the cost while maintaining a good performance compared to the general GPOM framework. From our experiments, we can find that our model enables GPOM to run online and achieve a relatively better quality than the classical GPOM.

cs.RO↗

arXiv2018

Topological Area Graph Generation and its Application to Path Planning

Representing a scanned map of the real environment as a topological structure is an important research in robotics. %is currently an important research. Since topological representations of maps save a huge amount of map storage space and online computing time, they are widely used in fields such as path planning, map matching, and semantic mapping. We propose a novel topological map representation, the Area Graph, in which the vertices represent areas and edges represent passages. The Area Graph is developed from a pruned Voronoi Graph, the Topology Graph. The paper also presents path planning as one application for the Area Graph. For that, we derive a so-called Passage Graph from the Area Graph. Because our algorithm segments the map as a set of areas, the first experiment compares the results of the Area Graph with that of state-of-the-art segmentation approaches, which proved that our method effectively prevented over-segmentation. Then the second experiment shows the superiority of our method over the traditional A* planning algorithm.

cs.RO↗