arXiv subjects

S. -W. Huang

Publications and source records attributed to S. -W. Huang.

12 recordsLinked to original sources

arXiv2026

Selective coupling of coherent phonons to intertwined charge-orbital and magnetic orders in doped manganites

Strongly correlated materials feature technologically relevant functionalities such as high-temperature superconductivity and colossal magnetoresistance, which emerges from the competition and coexistence of electronic and magnetic phases. Uncovering the microscopic interactions underlying these phenomena remains challenging because spin, orbital, charge, and lattice degrees of freedom are inherently intertwined. Here, by combining time-resolved X-ray diffraction and polarization-resolved ultrafast optical reflectivity in La1/4Pr3/8Ca3/8MnO3, we reveal that coherent phonon modes can selectively track different ordered phases: the in-plane phonon response is predominantly sensitive to charge/orbital order, and the c-axis phonon response is sensitive to magnetic order. Moreover, a ferromagnetic-related hysteresis emerges even when solely probing the charge/orbital-ordered phase, indicating a strong microscopic coupling between the spatially separated charge/orbital-ordered and ferromagnetic-ordered phases. These results demonstrate that coherent phonons provide a direct time-domain route to disentangle intertwined electronic and magnetic dynamics in coupled phases.

cond-mat.str-el↗

arXiv2024

Imaging ultrafast electronic domain fluctuations with X-ray speckle visibility

Speckle patterns manifesting from the interaction of coherent X-rays with matter offer a glimpse into the dynamics of nanoscale domains that underpin many emergent phenomena in quantum materials. While the dynamics of the average structure can be followed with time-resolved X-ray diffraction, the ultrafast evolution of local structures in nonequilibrium conditions have thus far eluded detection due to experimental limitations, such as insufficient X-ray coherent flux. Here we demonstrate a nonequilibrium speckle visibility experiment using a split-and-delay setup at an X-ray free-electron laser. Photoinduced electronic domain fluctuations of the magnetic model material Fe$_{3}$O$_{4}$ reveal changes of the trimeron network configuration due to charge dynamics that exhibit liquid-like fluctuations, analogous to a supercooled liquid phase. This suggests that ultrafast dynamics of electronic heterogeneities under optical stimuli are fundamentally different from thermally-driven ones.

cond-mat.str-el↗

arXiv2017

Real-time dynamics and cross-correlation gating spectroscopy of free-carrier Drude slow-light solitons

Optical solitons-stable waves balancing delicately between nonlinearities and dispersive effects-have advanced the field of ultrafast optics and dynamics, with contributions spanning supercontinuum generation and soliton fission, to optical event horizon, Hawking radiation, and optical rogue waves, amongst others. Here we investigate picojoule soliton dynamics in silicon slow-light photonic-bandgap waveguides under the influence of Drude-modeled free-carrier induced nonlinear effects. Using real-time and single shot amplified dispersive Fourier transform spectroscopy simultaneously with high-fidelity cross-correlation frequency-resolved optical gating at femtojoule sensitivity and femtosecond resolution, we examine the soliton stability limits, the soliton dynamics including free-carrier quartic slow-light scaling and acceleration, and the Drude electron-hole-plasma induced perturbations on Cherenkov radiation and modulation instability. Our real-time single shot and time-averaged cross-correlation measurements are matched with our detailed theoretical modeling, examining the reduced group velocity free-carrier kinetics on solitons at picojoule.

physics.optics↗

arXiv2016

Phase stabilization of Kerr frequency comb internally without nonlinear optical interferometry

Optical frequency comb (OFC) technology has been the cornerstone for scientific breakthroughs such as precision frequency metrology, redefinition of time, extreme light-matter interaction, and attosecond sciences. While the current mode-locked laser-based OFC has had great success in extending the scientific frontier, its use in real-world applications beyond the laboratory setting remains an unsolved challenge. Microresonator-based OFCs, or Kerr frequency comb, have recently emerged as a candidate solution to the challenge because of their preferable size, weight, and power consumption (SWaP). On the other hand, the current phase stabilization technology requires either external optical references or power-demanding nonlinear processes, overturning the SWaP benefit of Kerr frequency combs. Introducing a new concept in phase control, here we report an internally phase stabilized Kerr frequency comb without the need of any optical references or nonlinear processes. We describe the comb generation analytically with the theory of cavity induced modulation instability, and demonstrate for the first time that the optical frequency can be stabilized by control of two internally accessible parameters: an intrinsic comb offset and the comb spacing. Both parameters are phase locked to microwave references, with 55 mrad and 20 mrad residual phase noises, and the resulting comb-to-comb frequency uncertainty is 0.08 Hz or less. Out-of-loop measurements confirm good coherence and stability across the comb, with measured optical frequency fractional instabilities of 5x10^-11/sqrt(t). The new phase stabilization method preserves the Kerr frequency comb's key advantages and potential for chip-scale electronic and photonic integration.

physics.optics↗

arXiv2016

Smooth coherent Kerr frequency combs generation with broadly tunable pump by higher order mode suppression

High-Q microresonator has been suggested a promising platform for optical frequency comb generation, via dissipative soliton formation. To achieve a higher Q and obtain the necessary anomalous dispersion, $Si_3N_4$ microresonators made of multi-mode waveguides were previously implemented. However, coupling between different transverse mode families in the multi-mode waveguides results in periodic disruption of dispersion and quality factor, introducing perturbation to dissipative soliton formation and amplitude modulation to the corresponding spectrum. Careful choice of pump wavelength to avoid the mode crossing region is thus critical in conventional $Si_3N_4$ microresonators. Here, we report a novel design of $Si_3N_4$ microresonator such that single mode operation, high quality factor, and anomalous dispersion are attained simultaneously. The microresonator is consisted of uniform single mode waveguides in the semi-circle region, to eliminate bending induced mode coupling, and adiabatically tapered waveguides in the straight region, to avoid excitation of higher order modes. The intrinsic Q of the microresonator reaches $1.36 \times 10^6$ while the GVD remains to be anomalous at $-50 fs^2/mm$. We demonstrate, with this novel microresonator, broadband phase-locked Kerr frequency combs with flat and smooth spectra can be generated by pumping at any resonances in the optical C-band.

physics.optics↗

arXiv2015

A stabilized 18 GHz chip-scale optical frequency comb at 2.8x10-16 relative inaccuracy

Optical frequency combs, coherent light sources that connect optical frequencies with microwave oscillations, have become the enabling tool for precision spectroscopy, optical clockwork and attosecond physics over the past decades. Current benchmark systems are self-referenced femtosecond mode-locked lasers, but four-wave-mixing in high-Q resonators have emerged as alternative platforms. Here we report the generation and full stabilization of CMOS-compatible optical frequency combs. The spiral microcomb's two degrees-of-freedom, one of the comb line and the native 18 GHz comb spacing, are first simultaneously phase-locked to known optical and microwave references. Second, with pump power control, active comb spacing stabilization improves the long-term stability by six orders-of-magnitude, reaching an instrument-limited 3.6 mHz/sqrt(t) residual instability. Third, referencing thirty-three of the nitride frequency comb lines against a fiber comb, we demonstrate the comb tooth-to-tooth frequency relative inaccuracy down to 53 mHz and 2.8x10-16, heralding unprecedented chip-scale applications in precision spectroscopy, coherent communications, and astronomical spectrography.

physics.optics↗

arXiv2015

Ultrafast Laser-Induced Melting of Long-Range Magnetic Order in Multiferroic TbMnO3

We performed ultrafast time-resolved near-infrared pump, resonant soft X-ray diffraction probe measurements to investigate the coupling between the photoexcited electronic system and the spin cycloid magnetic order in multiferroic TbMnO3 at low temperatures. We observe melting of the long range antiferromagnetic order at low excitation fluences with a decay time constant of 22.3 +- 1.1 ps, which is much slower than the ~1 ps melting times previously observed in other systems. To explain the data we propose a simple model of the melting process where the pump laser pulse directly excites the electronic system, which then leads to an increase in the effective temperature of the spin system via a slower relaxation mechanism. Despite this apparent increase in the effective spin temperature, we do not observe changes in the wavevector q of the antiferromagnetic spin order that would typically correlate with an increase in temperature under equilibrium conditions. We suggest that this behavior results from the extremely low magnon group velocity that hinders a change in the spin-spiral wavevector on these time scales.

cond-mat.str-el↗

arXiv2015

A low-phase-noise 18 GHz Kerr frequency microcomb phase-locked over 65 THz

Laser frequency combs are coherent light sources that simultaneously provide pristine frequency spacings for precision metrology and the fundamental basis for ultrafast and attosecond sciences. Recently, nonlinear parametric conversion in high-Q microresonators has been suggested as an alternative platform for optical frequency combs, though almost all in 100 GHz frequencies or more. Here we report a low-phase-noise on-chip Kerr frequency comb with mode spacing compatible with high-speed silicon optoelectronics. The waveguide cross-section of the silicon nitride spiral resonator is designed to possess small and flattened group velocity dispersion, so that the Kerr frequency comb contains a record-high number of 3,600 phase-locked comb lines. We study the single-sideband phase noise as well as the long-term frequency stability and report the lowest phase noise floor achieved to date with -130 dBc/Hz at 1 MHz offset for the 18 GHz Kerr comb oscillator, along with feedback stabilization to achieve frequency Allan deviations of 7x10-11 in 1 s. The reported system is a promising compact platform for achieving self-referenced Kerr frequency combs and also for high-capacity coherent communication architectures.

physics.optics↗

arXiv2015

Mode-locked ultrashort pulse generation from on-chip normal dispersion microresonators

We describe the generation of stable mode-locked pulse trains from on-chip normal dispersion microresonators. The excitation of hyper-parametric oscillation is facilitated by the local dispersion disruptions induced by mode interactions. The system is then driven from hyper-parametric oscillation to the mode-locked state with over 200 nm spectral width by controlled pump power and detuning. With the continuous-wave driven nonlinearity, the pulses sit on a pedestal, akin to a cavity soliton. We identify the importance of pump detuning and wavelength-dependent quality factors in stabilizing and shaping the pulse structure, to achieve a single pulse inside the cavity. We examine the mode locking dynamics by numerically solving the master equation and provide analytic solutions under appropriate approximations.

physics.optics↗

arXiv2014

An integrated low phase noise radiation-pressure-driven optomechanical oscillator chipset

High-quality frequency references are the cornerstones in position, navigation and timing applications of both scientific and commercial domains. Optomechanical oscillators, with direct coupling to continuous-wave light and non-material-limited f Q product, are long regarded as a potential platform for frequency reference in radio-frequency-photonic architectures. However, one major challenge is the compatibility with standard CMOS fabrication processes while maintaining optomechanical high quality performance. Here we demonstrate the monolithic integration of photonic crystal optomechanical oscillators and on-chip high speed Ge detectors based on the silicon CMOS platform. With the generation of both high harmonics (up to 59th order) and subharmonics (down to 1/4), our chipset provides multiple frequency tones for applications in both frequency multipliers and dividers. The phase noise is measured down to -125 dBc/Hz at 10 kHz offset at ~ 400 μW dropped-in powers, one of the lowest noise optomechanical oscillators to date and in room-temperature and atmospheric non-vacuum operating conditions. These characteristics enable optomechanical oscillators as a frequency reference platform for radio-frequency-photonic information processing.

physics.optics↗

arXiv2011

Resonant elastic soft x-ray scattering in oxygen-ordered YBa_2Cu_3O_{6+delta}

Static charge-density wave (CDW) and spin-density wave (SDW) order has been convincingly observed in La-based cuprates for some time. However, more recently it has been suggested by quantum oscillation, transport and thermodynamic measurements that density wave order is generic to underdoped cuprates and plays a significant role in YBa_2Cu_3O_{6+delta} (YBCO). We use resonant soft x-ray scattering at the Cu L and O K edges to search for evidence of density wave order in Ortho-II and Ortho-VIII oxygen-ordered YBCO. We report a null result -- no evidence for static CDW order -- in both Ortho-II and Ortho-VIII ordered YBCO. While this does not rule out static CDW order in the CuO_2 planes of YBCO, these measurements place limits on the parameter space (temperature, magnetic field, scattering vector) in which static CDW order may exist. In addition, we present a detailed analysis of the energy and polarization dependence of the Ortho-II superstructure Bragg reflection [0.5 0 0] at the Cu L edge. The intensity of this peak, which is due to the valence modulations of Cu in the chain layer, is compared with calculations using atomic scattering form factors deduced from x-ray absorption measurements. The calculated energy and polarization dependence of the scattering intensity is shown to agree very well with the measurement, validating the approach and providing a framework for analyzing future resonant soft x-ray scattering measurements.

cond-mat.supr-con↗

arXiv2008

Electronic structure of the SrTiO$_3$/LaAlO$_3$ interface revealed by resonant soft x-ray scattering

We investigated the electronic structure of the SrTiO$_3$/LaAlO$_3$ superlattice (SL) by resonant soft x-ray scattering. The (003) peak, which is forbidden for our "ideal" SL structure, was observed at all photon energies, indicating reconstruction at the interface. From the peak position analyses taking into account the effects of refraction, we obtained evidence for electronic reconstruction of Ti 3d and O $2p$ states at the interface. From reflectivity analyses, we concluded that the AlO$_2$/LaO/TiO$_2$/SrO and the TiO$_2$/SrO/AlO$_2$/LaO interfaces are quite different, leading to highly asymmetric properties.

cond-mat.str-el↗